Soft, safe ammo for the Sportsman Shotgun or Sportsman Revolver Toy Gun for Children. Soft rubber ”bullets” are 1/4” diameter and 5/8” long. 20 per bag. Sportsman Toy Shotgun for Children sold separately and can be found through item search at item number 38-955-048-41 Sportsman Revolver Toy Gun for Children sold separately and can be found through item search at item number 38-955-048-42
Guns & Ammo – From combat pistols to magnum hunting rifles, every issue of G&A gives you the scoop on the latest guns, accessories, and gear, plus extensive coverage of shooting tactics, government and legal issues, sportsmen’s rights, reloading, training, and collectibles. Published by Primedia. Savings – 75% off cover price.
MTM ammo boxes have been a favorite of reloaders and shooting sports enthusiasts since the early 1970s, with the MTM rifle ammo boxes leading the way. MTM’s original ammo boxes, these flip top boxes are available in several sizes to handle all of your various caliber gun’s ammo. Polypropylene construction gives you a virtually indestructible box that will not warp, crack, expand, or contract. Snap lock latches prevent accidental spills. Load label included so you can identify ammunition stored in each box. 50 round capacity. Assorted colors. Made in USA. Features: Polypropylene construction – will not warp, crack, or contract Snap lock latch closes tight – no spills 50 round capacity Load label to identify ammo in box
Large capacity, impact-resistant, plastic, dry box keeps your ammo and precision shooting equipment and accessories secure, transportable and protected from the elements. Hinged cover features beefy, fold down, carry handle and integral tool compartment with snap down lid. Cam latch pulls cover down tight to form watertight seal between gasket and base. Two, molded flanges allow locked storage using your padlocks. Inside features 13½” x 7¼” removable tray with built-in handle; keeps cleaning supplies and other items organized on the shooting bench. Easy access, base compartment provides a roomy 13¼” x 6¾” x 5¼” storage space with tray installed. SPECS: Impact-resistant plastic, black. Approximately 15″ (38cm) long, 8” (20cm) wide, 10” (25cm) high. 2 lb. 13 oz. (822g) wt.
When it?s time to reload, choose Daisy Power Line Glass Slingshot Ammo. The glass shot ammo has a high visibility and measures 1/2” in diameter. 75 per pack.
Keep a good stock of shotshells or cartridges with you with this handy ammo belt from RedHead. This durable nylon web shotgun or rifle cartridge belt is fully adjustable and fits up to a 56″ waist. Strong slip snap closure buckle. Shotgun holds 25 shells. Rifle holds 20 cartridges. Elastic loops hold ammo tightly. Made of 600 denier polyester. Imported. Features: Durable 600 denier polyester belt Shotshell belt holds 25 shotshells Rifle belt holds 20 cartridges Slip snap closure buckle Elastic ammo loops hold shells or cartridges tightly.
Incorporates the full-size Shooting Bag’s high-quality materials and construction features in a smaller package that’s compact, yet roomy, and easy to carry. The big central compartment has an adjustable divider of sturdy corrugated plastic, perfect for keeping fresh ammo and spent brass separate. Or remove the divider completely and store muffs, protective eyewear, shooting gloves, and other gear. One of the full-length, zippered side compartments contains a fully padded, pull-out pistol rug with a soft, non-marring interior to protect a full-size handgun from nicks, dings, and other damage during transport. The other compartment offers generous storage for magazines and small items. Strong SPECS: 1000 denier Cordura nylon body; plastic bottom insert; leather zipper pull-strap; brass zipper hardware. Dark brown. 12” (30.5cm) long, 6” (15.2cm) wide, 8” (20.3cm) high.
The ammo you want when it matters the most, trust Hornady to deliver hard hitting, dependable ammo for your favorite pistol. Using the same technology as Hornady’s professional law enforcement ammo lines, Hornady Custom pistol ammunition is loaded to the same exacting specifications as all Hornady ammunition. With Hornady’s premium ammunition components, you can reliably use cartridges that have been stored in virtually any environment for years. Hornady ammunition is the brand of choice for tactical teams, snipers and patrol officers around the world because it performs flawlessly when the need is the greatest. Every cartridge is hand inspected to ensure 100% reliability. Offered in a variety of calibers and tips. FTT: Flex Tip Technology JHP: Jacketed Hollow Point SST: Super Shock Tipped XTP: Extreme Terminal Performance FP: Flat Point Features: Same technology as Hornady’s professional law enforcement ammo lines Proven, reliable, terminal performance Premium components and hand inspected to deliver cartridges you can trust Comes in a large range of calibers and tips
Winchester USA Handgun Ammo is a wise choice for serious centerfire handgun shooters who demand sure functioning rounds that deliver accuracy with controlled recoil shot after shot. An ideal choice for training or extended sessions at the range. Winchester USA Jacketed Hollow Point rounds also serve as excellent personal protection ammo. Winchester USA brand ammunition provides great performance in a wide range of choices at a value price. FMJ: Full Metal Jacket JHP: Jacketed Hollow Point JFP: Jacketed Flat Point LRN: Lead Round Nose Features: Positive functioning Good accuracy No barrel leading Controlled recoil
Durable, amply-sized bag crafted from 4 oz., tanned, suede looks great, holds up well, and customizes to fit your needs. Self-healing, YKK zippers, with suede accent pulls, protect a large, multi-sectioned interior that’s perfect for carrying ammo, hearing protection, notebooks, and anything you need at the range. Adjustable dividers let you decide how big you want each internal compartment to be. Carry handles completely wrap around the bag and won’t tear when carrying a heavy load. Outside, bellows pockets contain Sherpa®-lined, foam-padded, pistol inserts that protect your handguns from harm or damage. A hard bottom panel, and a padded, cowhide shoulder SPECS: Suede, brown, matte finish. 7½” (19cm) high, 7″ (17.8cm) wide, 16″ (40.6cm) long. Pistol Inserts – 6½” (16.5cm) tall, 15″ (38.1cm) long.
You know Plano quality from their line of tackle boxes they have manufactured for many years. They make tough durable products of all kinds, and the Plano Ammo Can is no exception. Made in USA. Features: Top access in lid Special tongue-in-groove lids for water resistance Holds six boxes 2 3/4″ or 3″ shotgun shells Large comfortable handle Large secure brass bailed latch 15″L x 8″W x 10″H
Shoot a box of Remington Core-Lokt Centerfire ammo to see why it has remained the leader in centerfire deer ammo for more than six decades. The original controlled-expansion bullet design, Core-Lokt ammo remains one of the most effective hunting cartridges ever developed. A progressively tapered copper jacket is locked to a solid lead core to promote a perfectly controlled expansion and high weight retention upon impact. 20 rounds. PSP : Pointed Soft Point SP : Soft Point HP : Hollow Point JHP : Jacketed Hollow Point Features: Long-lasting big game ammo line The original controlled-expansion bullet design Progressively tapered copper jacket Jacket locked to a solid lead core Controlled expansion and high weight retention
Royce Leather Connoisseur Wine Carrier. A fine bottle of wine deserves special treatment. An elegant presentation for your special wine! The Connoisseur Wine Carrier is the essential case for the wine enthusiast. Whether you’re going to a fancy dinner or a romantic picnic, your selected vintage makes a classy entrance in this superbly crafted, genuine leather case. Invest in this unique piece that…
Ammo Bag American Made by Duluth PackThis tough little bag is reinforced to carry real weight! Originally designed to accommodate six boxes of shotgun shells, people have found a variety of other uses for it (tool kit, CD case, doctor bag). Item Number: T-501Dimensions: 6Hx14Wx5DMade in USA…
White marbles reflect light so that the eye can “trace” the ammo’s path like a tracer bullet. Seeing the ammo clearly as it heads toward the target makes it easier to become an expert shooter. The bright white color also makes Tracers easy to find so they can be shot many times. The tracer’s large 1/2″ size is easy to grip so that the power bands can be pulled smoothly with less hand strain. Use T…
Buying a WASR 10 at Cabelas?
When you buy a WASR 10 from Cabela’s, does it come with the extra mags, ammo bag, bayonet and oil container?
No. It would come with one magazine and maybe a bayonet. You don’t get the extras for used guns.
I saw some druganovs for $350. I would seriously consider one if I still had a job.
Range Bag – Shotgun Shooters Ammo Bag – Duluth Pack
The original folding tang sight that increases sight radius for greater potential accuracy with your favorite lever action rifle. Sight features rugged, all-steel construction, knurled locking screw, index marks on aperture post, .093″ quick sight and .040″ large disc apertures. Includes rear stock screw and front tang screw. SPECS: Steel, blued. M-94, c-to-c 2.200″, fits Winchester Model 94. M-36, c-to-c .845″, fits Marlin Models 336, 30 and 1895. Both may require drilling and tapping. Can be adapted to other rifles.
The original folding tang sight that increases sight radius for greater potential accuracy with your favorite lever action rifle. Sight features rugged, all-steel construction, knurled locking screw, index marks on aperture post, .093″ quick sight and .040″ large disc apertures. Includes rear stock screw and front tang screw. SPECS: Steel, blued. M-94, c-to-c 2.200″, fits Winchester Model 94. M-36, c-to-c .845″, fits Marlin Models 336, 30 and 1895. Both may require drilling and tapping. Can be adapted to other rifles.
The original folding tang sight that increases sight radius for greater potential accuracy with your favorite lever action rifle. Sight features rugged, all-steel construction, knurled locking screw, index marks on aperture post, .093″ quick sight and .040″ large disc apertures. Includes rear stock screw and front tang screw. SPECS: Steel, blued. M-94, c-to-c 2.200″, fits Winchester Model 94. M-36, c-to-c .845″, fits Marlin Models 336, 30 and 1895. Both may require drilling and tapping. Can be adapted to other rifles.
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.The correct screw set can be found directly below the sight model it fits in the chart below. SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Lat
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-range competitions. Each sight comes with a post that is the correct height to regulate the same as the original factory iron sights. Click adjustable for windage and elevation; each click is approximately ¼" of adjustment at 100 yards. For larger elevation changes, you can easily swap SPECS: Steel, blued. Drilling and tapping may be required for installation on older guns. Sight kit includes base, Low (L) or Standard (S) height post, ½" O.D. aperture disc with .055" peep, and Allen wrench.
Trijicon Colt Government 3 Dot Front & Rear Night Sight Set, .125 Tang, Specifications: Colt Govt., 1911, Combat Elite, Delta Elite models made after 1988; stake-in front Para Ordnance P10 and P14 (excluding Limited versions). Large staking tang (.125), green front & green rear. Trijicon self-luminous iron sights are proven to give shooters five times greater night fire accuracy-with the same s…
Lyman #2 Tang Sight For Winchester 94 Md: 3902094, The No. 2 Tang for Marlin models 336, 1894, 1895 and 30 series lever action rifles. Like the original, the No. 2 is all steel construction and features height index marks on the aperture post, with a maximum elevation of .800 for long range shooting. It includes both a .093 quick sighting hunting aperture and a .040 large disk target aperture. Als…
Gives the single-shot or lever gun shooter the period looks of a traditional, tang-mounted peep sight plus new adjustability features that allow fast changes from short- to long-range settings. Great for the cowboy shooter who wants to use the same gun in cowboy competition and long-range side matches, or as an alternative to vernier-type sights on single-shot rifles used in BPCR and other long-ra…
where can I buy Lyman #2 tang sight for Win. 94?
can I make it fit a Marlin 93 or a win 92
Midway the mail order company, or go to Lyman directly. If its a tang sight it would fit any stock thick enough to accept the base. I even put mine on a sks at one time.
Rugged and comfortable caps boldly embroidered with “Brownells” and our motto Selection. Service. Satisfaction® on the front, and our Ram logo on the back. Six-panel, brushed cotton construction provides comfort and long-lasting strength and has six sewn eyelets for breathability. Contours comfortably to your head without losing shape and the pre-formed bill has just the right amount of “bend” in it. Adjustable Velcro strap makes fitting easy and convenient. Available in blaze orange, Real Tree camo, and khaki gray and comes with the Brownells Mil/LE logo stitched on the front, these hats are the perfect addition to your next hunting trip, day a the range, or a drive around town. SPECS: Brushed cotton. One size fits most; adjustable, velcro strap.
Wide brim Lightweight and breathable Adjustable chin strap Elasticized headband for snug fit Embroidered logo on fabric hatband This versatile Straw Hat by Glacier Glove features a wide brim to shade your eyes and face from the sun’s harsh glare. Woven from straw for its effective insulating properties, this comfortable Straw Hat by Glacier Glove is lightweight and breathable, allowing air to circulate and cool your head while shading your face and neck from the sun’s heat and UV rays. Other features include a woven hatband with embroidered logo, adjustable strap and elasticized headband for a snug fit. Color: Tan. Imported.
Not your average camo cap, the RedHead Visor Logo Camo Cap features logo treatment on its visor and antique brass eyelets for a distinctive look. With a RedHead logo on the front panel, the RedHead flying duck on the visor, and the RedHead logo above the arch in the back of the hat, this six panel unstructured cap features several RedHead logos on a Mossy Oak Duck Blind background. Easy adjust tuck strap closure features a brass buckle to add to this cap’s distinctive design. One size fits most. Imported.
A Florida style hat with 3″ brim. Made from natural sea grass twist. Bass Pro Shops? logo on the hat band. Sun Blocker Series lining used under the crown and brim for extra sun protection. Band color: Realtree Hardwoods Green? HD?. One size fits most. Imported.
Nickel Plated Hat Hook Features the Bass Pro Shops logo Perfect on your hat, shirt and many other items Showcase your passion for the outdoors everywhere you go with the Bass Pro Hat Hook Pin. This pin features a highly detailed Bass Pro Shops logo and a handsome nickel plated hook. Dress up your hat or shirt with this brilliantly colored hat hook pin! Imported.
This adorable youth Bucket Hat features the Bass Pro Shops logo Slightly distressed with a fringed pink and brown trim Durable construction This too-cute-for-words Bucket Hat is a must have for your little outdoor adventurer! Slightly distressed with a fringed pink and brown trim, this hat is perfect for sunny days on the water, playing with friends or just for fun! Color: pink with brown accents. Imported. Makes a great gift or Bass Pro Shops souvenir!
3″ brim Natural seagrass twist construction Sunblocker lining Realtree APG camo band Texas-style design with a 3” brim. Made from natural sea grass twist. RedHead logo on hatband. Sun Blocker Series lining used under the crown and brim for extra sun protection. Band color: Realtree APG . One size fits most. Imported.
With its pre-worn look and unstructured design, the RedHead Duck Logo Camo Cap for Ladies is a perfect hunting cap for outdoorswomen. This easy wearing hat features a distressed treatment that delivers the washed and frayed look usually gained only after years of “breaking in”. This super comfortable six panel cap features a pink RedHead duck logo patch on the front panels and a RedHead logo above the arch in the rear of the hat. Easy and precise adjusting tuck strap closure. Color: Mossy Oak Break-Up . One size fits most. Imported. Features: Easy wearing camo hunting hat for ladies Treated to give you a broken-in look Pink RedHead duck logo patch on front RedHead logo above the rear arch Tuck strap closure One size fits most
Prevents springing the frame by using fitted inserts that exactly match the contours of the revolver frame and distribute the turning forces evenly over it. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns. SPECS: 15¼” (39cm) overall length. 3″ (7.6cm) wide 4½” (11.4cm) includes lock screw). 1″ (2.5cm) thick. .755″ (19.2mm) handle diameter. Weighs 1¾” lb. (.79kg) w/o insert. Inserts weigh 6½” oz. (184.3g). Steel handle. Aluminum head. Delrin insert.
Prevents springing the frame by using fitted inserts that exactly match the contours of the revolver frame and distribute the turning forces evenly over it. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns. SPECS: 15¼” (39cm) overall length. 3″ (7.6cm) wide 4½” (11.4cm) includes lock screw). 1″ (2.5cm) thick. .755″ (19.2mm) handle diameter. Weighs 1¾” lb. (.79kg) w/o insert. Inserts weigh 6½” oz. (184.3g). Steel handle. Aluminum head. Delrin insert.
Prevents springing the frame by using fitted inserts that exactly match the contours of the revolver frame and distribute the turning forces evenly over it. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns. SPECS: 15¼” (39cm) overall length. 3″ (7.6cm) wide 4½” (11.4cm) includes lock screw). 1″ (2.5cm) thick. .755″ (19.2mm) handle diameter. Weighs 1¾” lb. (.79kg) w/o insert. Inserts weigh 6½” oz. (184.3g). Steel handle. Aluminum head. Delrin insert.
Prevents springing the frame by using fitted inserts that exactly match the contours of the revolver frame and distribute the turning forces evenly over it. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns. SPECS: 15¼” (39cm) overall length. 3″ (7.6cm) wide 4½” (11.4cm) includes lock screw). 1″ (2.5cm) thick. .755″ (19.2mm) handle diameter. Weighs 1¾” lb. (.79kg) w/o insert. Inserts weigh 6½” oz. (184.3g). Steel handle. Aluminum head. Delrin insert.
Prevents springing the frame by using fitted inserts that exactly match the contours of the revolver frame and distribute the turning forces evenly over it. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns. SPECS: 15¼” (39cm) overall length. 3″ (7.6cm) wide 4½” (11.4cm) includes lock screw). 1″ (2.5cm) thick. .755″ (19.2mm) handle diameter. Weighs 1¾” lb. (.79kg) w/o insert. Inserts weigh 6½” oz. (184.3g). Steel handle. Aluminum head. Delrin insert.
Prevents springing the frame by using fitted inserts that exactly match the contours of the revolver frame and distribute the turning forces evenly over it. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns. SPECS: 15¼” (39cm) overall length. 3″ (7.6cm) wide 4½” (11.4cm) includes lock screw). 1″ (2.5cm) thick. .755″ (19.2mm) handle diameter. Weighs 1¾” lb. (.79kg) w/o insert. Inserts weigh 6½” oz. (184.3g). Steel handle. Aluminum head. Delrin insert.
Embroidered St. Croix logo on front Adjustable strap for a snug fit Breathable Whether you’re on the water or off, everyone will know you mean business when wearing this St. Croix Oil Cloth Logo Cap. This stylish, breathable dark brown fishing hat features an embroidered St. Croix logo and an adjustable strap to ensure a snug fit. One size fits most. Color: dark brown. Imported.
A “no lathe” way to turn a surplus Small Ring 93-96 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen.NOTE: These actions are not as strong as the Mauser 98. The barrels listed are chambered for low pressure cartridges. Guns using them should be fired only with standard, factory-equivalent rounds. Handloads MUST NOT exceed SAAMI specs. SPECS: CM steel. .980″ diameter x .645″ long, – 12 tpi, “V” thread. 26″ (66cm) long.
A “no lathe” way to turn a surplus Small Ring 93-96 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen.NOTE: These actions are not as strong as the Mauser 98. The barrels listed are chambered for low pressure cartridges. Guns using them should be fired only with standard, factory-equivalent rounds. Handloads MUST NOT exceed SAAMI specs. SPECS: CM steel. .980″ diameter x .645″ long, – 12 tpi, “V” thread. 26″ (66cm) long.
A “no lathe” way to turn a surplus Small Ring 93-96 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen.NOTE: These actions are not as strong as the Mauser 98. The barrels listed are chambered for low pressure cartridges. Guns using them should be fired only with standard, factory-equivalent rounds. Handloads MUST NOT exceed SAAMI specs. SPECS: CM steel. .980″ diameter x .645″ long, – 12 tpi, “V” thread. 26″ (66cm) long.
A “no lathe” way to turn a surplus Small Ring 93-96 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen.NOTE: These actions are not as strong as the Mauser 98. The barrels listed are chambered for low pressure cartridges. Guns using them should be fired only with standard, factory-equivalent rounds. Handloads MUST NOT exceed SAAMI specs. SPECS: CM steel. .980″ diameter x .645″ long, – 12 tpi, “V” thread. 26″ (66cm) long.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
A “no lathe” way to turn a surplus Large Ring 98 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen. SPECS: 1.1″ diameter x .625″ long, – 12 tpi, “V” type thread. 26″ (66cm) long. Chrome moly (CM) or stainless steel (SS). Chamber for Standard or “Improved” versions of cartridges listed.
Screen-print baseball logo lends a laid-back vibe to a vintage-washed T-shirt, cut with a contemporary, slim fit, super soft and well-worn, water-based screen-print graphic…
Be a part of the team with this Franchise fitted hat from Twins Enterprise! Small fits 6 3/4 – 7. Medium fits 7 – 7 1/4. Large fits 7 1/4 – 7 1/2. XL fits 7 1/2 – 7 5/8….
Where can I get the sweet TB12 hat Tom Brady was wearing?
I want to find the fitted TB12 hat Tom Brady has been wearing for the past year. I don’t want the one that says Brady and then a 12 he one that has a TB logo. Help me out. thanks
I think this is the one you’re talking about and sadly I don’t think you can find it anywhere, unless you could find some fakes on eBay.
“New England Patriots quarterback Tom Brady spoke to media yesterday and some fans were more concerned about what he was wearing than what he said. Brady addressed the media while wearing a TB12 hat, which promotes Tom Brady’s website.
The TB12 hat has a stylized Tom Brady logo that features the letters T & B. The lower half of the letters make out the number 12. At the moment, there doesn’t appear to be any way to purchase the TB12 hat on the Tom Brady website.”
Complete rail coverage with minimal bulk and a checkered surface texture for a secure, non-slip grip even when hands are wet. Slides easily over rail, and hinged locking panel snaps tightly into a slot to prevent movement of cover. To reposition the cover, simply flip up the locking panel, slide to the new location on the rail, and snap down the lock. SPECS: Injection-molded hard polymer, black. 4 Panel – 3-1⁄8" (7.9cm) long x 1½” (3.8cm) wide. 8 Panel – 6-3⁄8" (16.2cm) x 1½” wide.
Complete rail coverage with minimal bulk and a checkered surface texture for a secure, non-slip grip even when hands are wet. Slides easily over rail, and hinged locking panel snaps tightly into a slot to prevent movement of cover. To reposition the cover, simply flip up the locking panel, slide to the new location on the rail, and snap down the lock. SPECS: Injection-molded hard polymer, black. 4 Panel – 3-1⁄8" (7.9cm) long x 1½” (3.8cm) wide. 8 Panel – 6-3⁄8" (16.2cm) x 1½” wide.
Tough, polymer cover slides over Picatinny rails to protect shooter’s hand from sharp edges of unused rails, and shield exposed rails from damage during rough tactical operations. Makes rail less likely to snag clothing and equipment and gives the rounded contour of a smooth, circular handguard with the freedom to reconfigure accessories whenever you need to. Rubber-like, pebble-texture grip surface helps shooter maintain better weapon control. Each panel covers 15 rail slots—the correct length to fit many carbine-length handguards without modification. Pre-segmented construction for ease in cutting to length to custom fit on other handguards. Multiple sections can be mounted SPECS: Synthetic polymer, matte black pebble finish. 6¼” (15.9cm) long x 1-3⁄8" (3.5cm) wide. Fits Picatinny and Weaver-style accessory rails. Covers 15 rail slots.
Completely covers the rail and contoured to give a rounded shape to Picatinny or Weaver-style rails. Grippy synthetic rubber snaps securely over rail and provides an excellent grasping surface. Long model has raised diamond-plate texture. Short model has two raised gripping ridges. SPECS: Synthetic rubber polymer, black or Coyote Brown. Long model is 5¾” (14.6cm) long x 1½” (3.8cm) wide. Short model is 1¾” (4.5cm) long x 1 ½” wide; sold in 12 pak.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Strong, polymer rail covers slide over picatinny rails to prevent dings and damage. Textured overmolding gives a sure grip that protects your hand from getting cut up when you grab a rail. Push-button, sliding clasp provides quick, secure attachment. Available singly or in an eight-piece set. Set includes three 6.1″ covers and one each of other five. SPECS: Synthetic Polymer, black, matte finish. Fits picatinny rails. Select the size you need in price line. 1” = 2.54cm.
Modular, snap-on panels cover exposed portions of Picatinny-type handguard rails to help you maintain a firm grip on your weapon while protecting hands from sharp edges of rail slots and grooves. Textured, low-profile panels install quickly and easily without removing already-mounted light, laser, vertical grip, bipod, or other accessories. Simply snap two panels together over the rail to cover a 1½" segment of rail. Unique locking system ensures the panels go on easily and remain securely affixed even during strenuous tactical operations. Remove them using the tips of two .223/5.56 NATO rounds or any tools with similar non-marring rounded tips. No need to match up “left SPECS: Molded polymer, Black, Flat Dark Earth, or Foliage Green. Eight (8) panels per Pak. Fits MIL-STD 1913 Picatinny rails.
Dual-purpose cover slides on and snaps into place on any Picatinny handguard rail. Protects the machined surfaces while offering a superior gripping surface for maximum weapon control. Impact and heat resistant for years of rugged use. BGR features six, highly textured grip recesses. BGRP includes switch pocket and pre-fit, interchangeable adapters for no-snag installation of SureFire® and Insight Technologies® remote pressure switches. Rail grips can be trimmed to length. SPECS: Resin polymer, black, foilage green, dark earth, or olive drab. 6-1⁄8″ (15.6cm) long x 1-3⁄8″ (3.5cm) wide. BGRP Fits Surefire, Insight Technologies and similar pressure switches measuring approx. 3-1⁄8″ (7.9cm) long x 7⁄8″ (2.2cm) wide or 2-5⁄16″ (5.9c
Completely covers the rail and contoured to give a rounded shape to Picatinny or Weaver-style rails. Grippy synthetic rubber snaps securely over rail and provides an excellent grasping surface. Long model has raised diamond-plate texture. Short model has two raised gripping ridges. SPECS: Synthetic rubber polymer, black or Coyote Brown. Long model is 5¾” (14.6cm) long x 1½” (3.8cm) wide. Short model is 1¾” (4.5cm) long x 1 ½” wide; sold in 12 pak.
Molded polymer covers snap over exposed portions of accessory rails to form a positive gripping surface for a comfortable, non-slip hand hold and improved weapon control. Protects your hands from the exposed rail edges and provides a soft cushion to help prevent damage to the rails during storage or transport. Slightly overhangs the rail on one side, so wires from remote switches for lights or red dot optics can be threaded through the built-in wire loom. Retains wires close to the rail, out of the way, so they don’t snag on other gear. SPECS: Synthetic rubber polymer, black or Combat Beige. 1¾” (4.5cm) long x 1¼” (3.2cm) wide.
Molded polymer covers snap over exposed portions of accessory rails to form a positive gripping surface for a comfortable, non-slip hand hold and improved weapon control. Protects your hands from the exposed rail edges and provides a soft cushion to help prevent damage to the rails during storage or transport. Slightly overhangs the rail on one side, so wires from remote switches for lights or red dot optics can be threaded through the built-in wire loom. Retains wires close to the rail, out of the way, so they don’t snag on other gear. SPECS: Synthetic rubber polymer, black or Combat Beige. 1¾” (4.5cm) long x 1¼” (3.2cm) wide.
Completely covers the rail and contoured to give a rounded shape to Picatinny or Weaver-style rails. Grippy synthetic rubber snaps securely over rail and provides an excellent grasping surface. Long model has raised diamond-plate texture. Short model has two raised gripping ridges. SPECS: Synthetic rubber polymer, black or Coyote Brown. Long model is 5¾” (14.6cm) long x 1½” (3.8cm) wide. Short model is 1¾” (4.5cm) long x 1 ½” wide; sold in 12 pak.
Modular, snap-on panels cover exposed portions of Picatinny-type handguard rails to help you maintain a firm grip on your weapon while protecting hands from sharp edges of rail slots and grooves. Textured, low-profile panels install quickly and easily without removing already-mounted light, laser, vertical grip, bipod, or other accessories. Simply snap two panels together over the rail to cover a 1½" segment of rail. Unique locking system ensures the panels go on easily and remain securely affixed even during strenuous tactical operations. Remove them using the tips of two .223/5.56 NATO rounds or any tools with similar non-marring rounded tips. No need to match up “left SPECS: Molded polymer, Black, Flat Dark Earth, or Foliage Green. Eight (8) panels per Pak. Fits MIL-STD 1913 Picatinny rails.
Dual-purpose cover slides on and snaps into place on any Picatinny handguard rail. Protects the machined surfaces while offering a superior gripping surface for maximum weapon control. Impact and heat resistant for years of rugged use. BGR features six, highly textured grip recesses. BGRP includes switch pocket and pre-fit, interchangeable adapters for no-snag installation of SureFire® and Insight Technologies® remote pressure switches. Rail grips can be trimmed to length. SPECS: Resin polymer, black, foilage green, dark earth, or olive drab. 6-1⁄8″ (15.6cm) long x 1-3⁄8″ (3.5cm) wide. BGRP Fits Surefire, Insight Technologies and similar pressure switches measuring approx. 3-1⁄8″ (7.9cm) long x 7⁄8″ (2.2cm) wide or 2-5⁄16″ (5.9c
Dual-purpose cover slides on and snaps into place on any Picatinny handguard rail. Protects the machined surfaces while offering a superior gripping surface for maximum weapon control. Impact and heat resistant for years of rugged use. BGR features six, highly textured grip recesses. BGRP includes switch pocket and pre-fit, interchangeable adapters for no-snag installation of SureFire® and Insight Technologies® remote pressure switches. Rail grips can be trimmed to length. SPECS: Resin polymer, black, foilage green, dark earth, or olive drab. 6-1⁄8″ (15.6cm) long x 1-3⁄8″ (3.5cm) wide. BGRP Fits Surefire, Insight Technologies and similar pressure switches measuring approx. 3-1⁄8″ (7.9cm) long x 7⁄8″ (2.2cm) wide or 2-5⁄16″ (5.9c
Attaches to rail with an oversized, ½” knob; tighten by hand or a wrench for rock-solid stability. SPECS: Steel, matte black. ½” clamping knob. Attaches to Picatinny rail systems with no permanent modifications.
Modular, snap-on panels cover exposed portions of Picatinny-type handguard rails to help you maintain a firm grip on your weapon while protecting hands from sharp edges of rail slots and grooves. Textured, low-profile panels install quickly and easily without removing already-mounted light, laser, vertical grip, bipod, or other accessories. Simply snap two panels together over the rail to cover a 1½" segment of rail. Unique locking system ensures the panels go on easily and remain securely affixed even during strenuous tactical operations. Remove them using the tips of two .223/5.56 NATO rounds or any tools with similar non-marring rounded tips. No need to match up “left SPECS: Molded polymer, Black, Flat Dark Earth, or Foliage Green. Eight (8) panels per Pak. Fits MIL-STD 1913 Picatinny rails.
Add-on light rail makes it cost-effective to convert any 1911 Auto-type pistol or early model Beretta 92/96 pistol without an integral frame rail to accept a wide assortment of popular weapon lights and lasers. Rail attaches permanently with the supplied screws and Acraglas Gel® to form a seamless mate with the dust cover. Aluminum model keeps aluminum-framed pistols lightweight and maneuverable. Steel version provides extra strength and added weight for improved balance and recoil control, plus it can be welded into place and finish-shaped for a “built-in” appearance on steel framed pistols. Installation requires permanent alteration of the frame and must be completed by a co SPECS: Aluminum or steel, matte black. 19⁄16″ (4cm) long, 13⁄16″ (2.1cm) wide, 3⁄8″ (9.5mm) high. Weight: Aluminum – .6 oz. (17g). Steel – 1.2 oz. (34g). Fits Beretta 92/96 and 1911 Auto-type pistols.Slot centers located .510″ from each end.
Add-on light rail makes it cost-effective to convert any 1911 Auto-type pistol or early model Beretta 92/96 pistol without an integral frame rail to accept a wide assortment of popular weapon lights and lasers. Rail attaches permanently with the supplied screws and Acraglas Gel® to form a seamless mate with the dust cover. Aluminum model keeps aluminum-framed pistols lightweight and maneuverable. Steel version provides extra strength and added weight for improved balance and recoil control, plus it can be welded into place and finish-shaped for a “built-in” appearance on steel framed pistols. Installation requires permanent alteration of the frame and must be completed by a co SPECS: Aluminum or steel, matte black. 19⁄16″ (4cm) long, 13⁄16″ (2.1cm) wide, 3⁄8″ (9.5mm) high. Weight: Aluminum – .6 oz. (17g). Steel – 1.2 oz. (34g). Fits Beretta 92/96 and 1911 Auto-type pistols.Slot centers located .510″ from each end.
Compact, lightweight laser sight projects a bright, highly visible beam on the target for precise shot placement. Mounts in seconds on any pistol, rifle, or shotgun with 1¾” or more of Picatinny or Weaver-style rail space. Ambidextrous switch is comfortably positioned for quick engagement when pistol shooter’s index finger rests along the slide in the Universal Cover Mode. Beam may be set to constant output or rapidly pulsating mode for even greater visibility. Low-profile housing allows many guns fitted with the Uni-Max to be carried in standard holsters. Integral Picatinny rail on underside of housing allows mounting of tactical weapon light. Windage and elevation adjust easily with the in SPECS: Fiber reinforced nylon, black. 2¼” (5.7cm) long, 1” (2.5cm) wide, ¾” (1.9cm) high. Beam Diameter – 5/16” (1.6cm) at 7 yards, ¾” (1.9cm) at 25 yards. Uni-Max Red – 635 nm wavelength laser. .9 oz. (26g) weight. Includes (2) 357 batteries and (2) Allen wrenches. Uni-Green – 532
High-intensity white light gives excellent target illumination. Includes Mn10, 125 lumen and Mn11, 225 lumen lamp assemblies with scratch resistant, Pyrex lens. Separate, low-level, blue LED navigation lights provide enough light to see obstacles without compromising your position. Constant-on, plus individual pressure switches and a disable switch control light output. Fits any rifle or shotgun with a Picatinny accessory rail; A.R.M.S Mount gives rapid installation and removal with a flip of a lever while the Thumb Screw mount provides permanent attachment. Vertical grip aids weapon retention and firing. Optional, Red and Blue, BeamCover filters protect your night vision while providing nav SPECS: Nitrolon body, black. Aluminum lamp assembly, 1.6″ (4cm) bezel. 7½” (19cm) long, 6″ (15.2cm) high, 1½” (3.8cm) wide. 18 oz. (510 g) wt.
High-intensity white light gives excellent target illumination. Includes Mn10, 125 lumen and Mn11, 225 lumen lamp assemblies with scratch resistant, Pyrex lens. Separate, low-level, blue LED navigation lights provide enough light to see obstacles without compromising your position. Constant-on, plus individual pressure switches and a disable switch control light output. Fits any rifle or shotgun with a Picatinny accessory rail; A.R.M.S Mount gives rapid installation and removal with a flip of a lever while the Thumb Screw mount provides permanent attachment. Vertical grip aids weapon retention and firing. Optional, Red and Blue, BeamCover filters protect your night vision while providing nav SPECS: Nitrolon body, black. Aluminum lamp assembly, 1.6″ (4cm) bezel. 7½” (19cm) long, 6″ (15.2cm) high, 1½” (3.8cm) wide. 18 oz. (510 g) wt.
Dual-purpose cover slides on and snaps into place on any Picatinny handguard rail. Protects the machined surfaces while offering a superior gripping surface for maximum weapon control. Impact and heat resistant for years of rugged use. BGR features six, highly textured grip recesses. BGRP includes switch pocket and pre-fit, interchangeable adapters for no-snag installation of SureFire® and Insight Technologies® remote pressure switches. Rail grips can be trimmed to length. SPECS: Resin polymer, black, foilage green, dark earth, or olive drab. 6-1⁄8″ (15.6cm) long x 1-3⁄8″ (3.5cm) wide. BGRP Fits Surefire, Insight Technologies and similar pressure switches measuring approx. 3-1⁄8″ (7.9cm) long x 7⁄8″ (2.2cm) wide or 2-5⁄16″ (5.9c
Reinforced plastic composite unit mounts to your AK-47 with no gunsmithing and gives you three rails for mounting picatinny pattern accessories. Rails on each side of the handguard, plus an additional rail on the bottom, allow for multiple accessory configurations to fit your specific mission. SPECS: Reinforced plastic composite, matte black. Mount – 6.5″ (16.4cm) long, Side rails – 1.85″ (4.6cm) long, Bottom rail – 5″ (12.8cm) long.
Free-float handguard with four MIL-STD 1913 Picatinny rails installs in minutes with absolutely no permanent modifications to weapon. Two-piece design allows installation using only a common flat-head screwdriver and the included hex key. Tighten the four Allen-head screws against the barrel nut with the hex key to eliminate movement and align the extended top rail with the receiver rail for an exceptionally long expanse of uninterrupted accessory mounting space. Plenty of ventilation cuts keep barrel cool and minimize weight—perfect for tactical rifles where every ounce saved improves speed and maneuverability. Rail slots are indexed with white letters and numbers for precise posit SPECS: 6061 T6 aluminum, hardcoat anodized, Matte Black or Flat Dark Earth (7.0 only). Includes mounting screws, three ladder-style rail covers, and instructions. 7.0 – 6-3⁄8" (16.2cm) long. Top Rail – 7” (17.8cm) long. 7.6 oz. (217g) wt. Fits AR-15 with carb
Free-float handguard with four MIL-STD 1913 Picatinny rails installs in minutes with absolutely no permanent modifications to weapon. Two-piece design allows installation using only a common flat-head screwdriver and the included hex key. Tighten the four Allen-head screws against the barrel nut with the hex key to eliminate movement and align the extended top rail with the receiver rail for an exceptionally long expanse of uninterrupted accessory mounting space. Plenty of ventilation cuts keep barrel cool and minimize weight—perfect for tactical rifles where every ounce saved improves speed and maneuverability. Rail slots are indexed with white letters and numbers for precise posit SPECS: 6061 T6 aluminum, hardcoat anodized, Matte Black or Flat Dark Earth (7.0 only). Includes mounting screws, three ladder-style rail covers, and instructions. 7.0 – 6-3⁄8" (16.2cm) long. Top Rail – 7” (17.8cm) long. 7.6 oz. (217g) wt. Fits AR-15 with carb
The A.R.M.S. #22 TRR Tactical Ring Rail allows the mounting of devices to the top of a scope ring. It offers an additional base to scoped rifles for the mounting of other equipment and accessories such as lights, lasers, or auxiliary sighting devices. This mount requires the use of the #22 Tactical Ring Cap and is compatible with #22M68 spacers for additional height when using optics with tall elevation adjustment knobs. Comes complete with two mounting screws. Specs: Ring Rail mounting base, Black finish, Mounting screws included.
Lightweight, aluminum, one-piece rail accepts Weaver-style rings and lets you select from four, different, ring locations to achieve proper eye relief. Durable, black-anodized finish resists scratches and mars. Already drilled so all you have to do is drill your receiver. SPECS: Aluminum, black anodized finish. 5″ (13cm) long, 53/64″ (21mm) wide, 13/64″ (5mm) high. Fits Reminigton M597 rifles. Minor gunsmithing required.
During competition or a tactical situation, you can’t afford to lose time fumbling to position your hand on the forearm, or, worse yet, have it slide off when racking a pump action shotgun. These ergonomically shaped handstops attach to a Picatinny rail forend to provide precise, tactile indexing of the support hand, so you keep your eyes on the target while mounting the weapon. Helps keep hand in position during recoil, too, for fast follow-up shots. Molded-polymer Snap-On stop snaps securely into a single rail slot. Rubber-coated SureStop protects the hand and resists snagging on other gear. Dual cross-bolts clamp the stop tightly to the rail for SPECS: Snap-On – Molded polymer, black. 1¼" (3.2cm) wide, ½" (1.2cm) thick. Sold in 2-Pak. SureStop – Synthetic-rubber coated molded polymer, black. Steel cross-bolts, oxide finish, matte black. 1¼" long x 1¼" w
The Wilson Combat Quad Rail was designed for serious shooters by experts in the field. This rail offers an extremely comfortable hand hold on the forend while maintaining the four rails for accessories. It also provides 8 threaded .25-inch tpi holes to allow for maximum attachment options. It is precision CNC machined from 6005A T5 then hard anodized for superior durability. SPECS: Top and bottom rails: 7.25 Picatinny rail. Sides: 1.5-inches of rail, black finish.
The Wilson Combat Quad Rail was designed for serious shooters by experts in the field. This rail offers an extremely comfortable hand hold on the forend while maintaining the four rails for accessories. It also provides 8 threaded .25-inch tpi holes to allow for maximum attachment options. It is precision CNC machined from 6005A T5 then hard anodized for superior durability. SPECS: Top and bottom rails: 7.25 Picatinny rail. Sides: 1.5-inches of rail, black finish.
Machined aluminum forearm gives your AK the same kind of tactical accessory mounting flexibility long available for the AR-15/M16 platform. Two-piece design clamps securely to the front barrel trunion and puts four, MIL-STD 1913 rails up front to provide plenty of space for mounting lights, lasers, optics, vertical grips, bipods, quick-detach sling swivels, and other accessories. Top rail won’t interfere with use of original iron sights; bottom rail has cutout to accommodate under-folding stock, and side rail allows clearance for side-folding stock. White, etched alphanumeric slot markings help you make sure accessories get reinstalled in the right locations after temporary removal. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Model 1 – 9¾” (24.8cm) OAL Fits most full-size AK-47/AKM with fixed or folding stocks. Model 2 – 6¾” (17.2cm) OAL Fits most Krinkovs, except Bulgarian. Due to manufacturing var
Machined aluminum forearm gives your AK the same kind of tactical accessory mounting flexibility long available for the AR-15/M16 platform. Two-piece design clamps securely to the front barrel trunion and puts four, MIL-STD 1913 rails up front to provide plenty of space for mounting lights, lasers, optics, vertical grips, bipods, quick-detach sling swivels, and other accessories. Top rail won’t interfere with use of original iron sights; bottom rail has cutout to accommodate under-folding stock, and side rail allows clearance for side-folding stock. White, etched alphanumeric slot markings help you make sure accessories get reinstalled in the right locations after temporary removal. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Model 1 – 9¾” (24.8cm) OAL Fits most full-size AK-47/AKM with fixed or folding stocks. Model 2 – 6¾” (17.2cm) OAL Fits most Krinkovs, except Bulgarian. Due to manufacturing var
Molded polymer covers snap over exposed portions of accessory rails to form a positive gripping surface for a comfortable, non-slip hand hold and improved weapon control. Protects your hands from the exposed rail edges and provides a soft cushion to help prevent damage to the rails during storage or transport. Low-profile, flexible polymer guard snaps neatly into the cross-slots on Picatinny rails. SPECS: Synthetic rubber polymer, black, Coyote Brown, or O.D. green. 6-7⁄8" (17.5cm) long x 1” (2.5cm) wide.
Heat-resistant, graphite rail aligns with vent holes on standard issue, round M16/AR-15 handguards and lets you mount picatinny rail accessories without the expense of new handguards. Aluminum backing plate mounts on inside of handguard and attaches to rail with two screws (included) and can be mounted to full stock AR-15/M16, CAR, and M4 handguards. Installs with no permanent modifications to the handguard. SPECS: Heat-resistant graphite, black. Aluminum backing plate. 2.16″ (5.5cm) long. Mounting screws included.
Picatinny rail provides quick, secure mounting for accessory lights, vertical-foregrips and aerosol spray canisters. AR-15 – Bolts to existing handguard holes. Compatible with mil-spec handguards for M16A2 rifles and M4 carbines (including double heat-shield styles). Does not require alteration to handguard. Mini has a single cross slot for attaching one item. Extended add multiple accessory attachment points to carbines and rifles. HK UMP – mounts to existing hard-points cast into the sides and bottom of the receiver on UMP submachinegun and USC semi-autos. SPECS: Aluminum alloy, hardcoat anodized, black, matte finish. Supplied with all mounting hardware, tools, and installation instructions. AR-15 Mini and Extended fit standard carbine handguards with 6 vent holes and no heat shield, plus M-4 carbine with 7 vent holes and double heat
Fully enclosed UIT rail enables mounting of your choice of Versa-Pod on almost any rifle with enough forearm area to allow inletting for custom installation of this rail. Machined from strong 1045 carbon steel, the rail comes with a QD swivel stud that rides in the slot and accepts Model 1, 2, and 3 Versa-Pods and the Universal Adapter. Includes mounting hardware and a 15/8″ sling loop. SPECS: Steel, black oxide finish. 6.7 oz. (189g) weight. 9” (22.9cm) O.A.L., ¾” (1.9cm) wide. Slot is 7½” (19.1cm) long. Gunsmith inletting of stock required.
Compact accessory rail clamps to the integral scope rail of your Surgeon rifle or other rifle equipped with a Picatinny topside rail to provide secure mounting alongside the receiver for lights, lasers, backup sights, and other tactical accessories. Increases the rifle’s versatility without adding excess bulk or weight. Precision machined from a single piece of high-grade 4140 carbon steel to the same exacting tolerances as a Surgeon action to ensure a stable, no-flex mounting platform. Minimal-profile clamping system meshes with three slots on the receiver rail and grabs tight with three, hidden, hex-head bolts (hex wrench included). SPECS: 4140 carbon steel, black oxide finish. 3¾” (9.5cm) long. 4.8 oz. (137g) weight. Fits Surgeon Rifles receiver rails and similar MIL-STD 1913 rails.
Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill Customizable Free-Float Tube or Customizable Two-Piece Handguard. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6″ rail is a full-length rail for Carbine-length handguards, 9¼” rail is the correct length for Specter tubes, and 12″ rail is full-length for Rifle tubes. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Fits Yankee Hill Customizable Free-Float and Two-Piece Handguards. Mounting screws included.
Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill Customizable Free-Float Tube or Customizable Two-Piece Handguard. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6″ rail is a full-length rail for Carbine-length handguards, 9¼” rail is the correct length for Specter tubes, and 12″ rail is full-length for Rifle tubes. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Fits Yankee Hill Customizable Free-Float and Two-Piece Handguards. Mounting screws included.
Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill Customizable Free-Float Tube or Customizable Two-Piece Handguard. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6″ rail is a full-length rail for Carbine-length handguards, 9¼” rail is the correct length for Specter tubes, and 12″ rail is full-length for Rifle tubes. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Fits Yankee Hill Customizable Free-Float and Two-Piece Handguards. Mounting screws included.
Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill Customizable Free-Float Tube or Customizable Two-Piece Handguard. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6″ rail is a full-length rail for Carbine-length handguards, 9¼” rail is the correct length for Specter tubes, and 12″ rail is full-length for Rifle tubes. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Fits Yankee Hill Customizable Free-Float and Two-Piece Handguards. Mounting screws included.
One-piece rails cut to true, MIL-STD 1913 Picatinny spec match the look and feel of your standard, A4 flattop while adding ½” of height for proper cheek weld with optics and tactical sights. Streamlined design encloses the receiver rail for a “built-in” appearance and eliminates protruding hardware that can snag on brush, slings, and clothing. Nylon-tipped, Allen screws, tapped through the top, deliver downward pressure between the receiver rail slots for exceptional holding power. Precision machined from strong, yet lightweight 6061-T651 billet aluminum, then hardcoat anodized with a tough, Teflon-impregnated finish to Mil-A-8625 for extra strength and superior wear resistance. Scout Rail SPECS: 6061-T651 billet aluminum, hard black anodized. Fits mil-spec flattop receivers. Scout Rail – 10½” (26.7cm) long x ½” (1.3cm) high. 4.4 oz. (125g) wt. BUIS Scout Rail – 8¼” (21cm) long x ½” (1.3cm) high. 3.3 oz. (94g) wt. BUIS Scout Rail w/Flip Up Sight – 10-7⁄
FREE SHIPPING on this item when you purchase 2 or more Framed Art Posters from ClassicPix.com. This high quality art poster is matted and framed by our professional framers, and arrives fully assembled and ready to hang. The durable black wood frame measures 17″ x 23″ – poster size is 12″ x 18″. A clear plexiglass facing protects your poster and adds a lusterous shine. Posters are printed on heavy…
How do I make my aluminum hand rails sturdy on my brick front porch again?
I have a newer home. The black aluminum hand rails that are mounted into hole boared into the brick front porch. There is a clear, hard material that surrounds the rail in each hole, then a small amount of grey concrete that once covered that but has since chipped off. The rails are not sturdy. There are no supports that go from the top of the rail into the siding. Any suggesting on making the rails secure?
That is a tough one. I am an investor who rehabs homes often…..and I have found that the best way to go is to use Wood.
I would buy two decorative posts….two 2×4s and several spacer posts. (all treated) Screw together….anchor posts and repeat if another rail is needed…. I always seem to paint them, but they beat the heck out of the aluminum rails and actually is cheaper……..bar none
good luck….
Black Diamond Heavies: Live AC/DC Cover: It’s a Long Way to the Top (If You Want to Rock N Roll)
Adjust sling from carry to firing while moving into position. After firing, a quick tug on the lanyard returns sling to carry position. Designed to carry gun, muzzle down on your back. Padded model features a closed-cell foam shoulder pad for greater comfort when carrying heavy weapons long distances. Buttstock Adapter provides correct, top-of-stock sling mount point. SPECS: Nylon web, black. 1″ (2.5cm) wide. Padded model includes 20″ (50.8cm) long x 1-7⁄8″ (4.7cm) wide shoulder pad. Adjusts 58″ (147cm) to 63″ (160cm).
Outdoor cooking just got a lot easier! Patented design adjusts up, down, and around to cook a variety of different foods and keep your fingers away from the fire. Heavy-gauge steel construction with a manufacturer’s lifetime warranty. Includes a 10-oz. canvas storage bag that doubles as a potholder. Dimensions: 16″ x 16″ x 3/4″.
These Neet? pull adjust armguards feature a push-button release on the pull-adjust strap system that will adjust to any arm size and detach quickly by pressing the center release buckle. Also features durable Cordura? facing with string saver stave that eliminates string wear by padding the shot. 3-strap model for lower arm protection. 4-strap model for full arm protection. Made in USA.
The A.R.M.S. #41 B Silhouette Front Folding Sight features an integral gas block and fits standard size 750 barrels. This sight addresses the problems of standard triangle shape non-folding front sights, utilizing a rugged spring loaded angled support system. This angled system helps eliminate snags in brush and other hazards. It also uses the standard front sight post. Comes complete with a non-reflective black finish and included adjustment wrench. Specs: Fits size 750 barrels, Folding design, Angled support, Black finish, Included adjustment wrench
The Midwest Industries Inc. Folding Front Sight Tower is designed for the Armalite AR-10 rifles with 16 and 20-inch barrels with a diameter of .750 inches. This sight is machined to the appropriate height for use with standard AR-15 back up sights.
Beefy, hand-filling, vertical grip deploys fast from the stowed position so you have maximum weapon control and retention during CQB maneuvers. Hollow-core handle is formed using the same mold and Mil-Spec, thermoset polymer used for the spade grips of Browning M2 .50 caliber machine guns. Machined, aluminum, pivot mount with steel hex screw attaches grip to any Picatinny or Weaver-style accessory rail. 3-Position Grip uses a threaded, steel shank pinned to the pivot mount for full 180° of rotation; secures in the down, forward or rearward positions by simply tightening down the handle. Quick Action Grip pivots in one direction, and includes a spring-loaded SPECS: Pivot Mount – Aluminum, matte black, Mil-Spec phosphate coating. Handle – Mil-Spec Thermoset polymer, matte black. 5½” (14cm) long. Weight – Folding: 6.6 oz. (187 g). Quick Action: 4.7 oz. (133 g).
Adjust sling from carry to firing while moving into position. After firing, a quick tug on the lanyard returns sling to carry position. Designed to carry gun, muzzle down on your back. Padded model features a closed-cell foam shoulder pad for greater comfort when carrying heavy weapons long distances. Buttstock Adapter provides correct, top-of-stock sling mount point. SPECS: Nylon web, black. 1″ (2.5cm) wide. Padded model includes 20″ (50.8cm) long x 1-7⁄8″ (4.7cm) wide shoulder pad. Adjusts 58″ (147cm) to 63″ (160cm).
Universal bench tool provides accurate cross-dovetail pistol sight adjustment and installation without damage to the sight or the slide. Multi-position, slide support block and separate slide clamp adjust quickly and give tremendous versatility. Flex-free body is machined from a solid block of aluminum alloy. Square threaded adjustment screw with hardened handle provides plenty of leverage to move even the most stubborn sight without damage. Includes attachment ears for bench mounting. SPECS: Body – Aluminum, black, hardcoat anodized finish. 6″ (15cm) wide, 4½” (11cm) high, 2 lb. (.9kg) wt. Adjustment Screw – Hardened steel. Includes complete instructions and pistol sight reference chart. Will not install tenon-style front sights.
Serves as a globe sight for long-range shooting when raised, or you can fold it down and use the built-in blade for close work. Ball/detent mechanism positively locks sight in folded or extended position. Fits rifles with 3⁄8″, 60° dovetails. SPECS: Steel, blued, and natural-finish brass.Fits 3⁄8” (9.5mm), 60° dovetail.
Modeled after the original Israeli Galil design with positive frame locking for superior control. Fits stamped receiver models; ribbed buttplate prevents slippage. SPECS: Molded polymer, black. L.O.P. is 13¼” (36.6cm). Fits stamped receivers only.
Folding design helps prevent accidental damage to the rear leaf. Leaf easily flips down, out of the way, when your favorite lever or single-shot rifle is stored or carried. Long shank, barrel-mounted sight is fully adjustable using the center plate and center plate lock screw—no need for a separate elevator. Flat top leaf with white diamond sight insert helps improve sight acquisition and alignment. Screw and drift adjustable for windage. Fits nominal 3⁄8″ dovetail. May require minor fitting. SPECS: Steel, blue, polished finish. Leaf – .300” (7.8mm) high, .630” (15.8mm) wide. Fits nominal 3⁄8″ (9.5mm) dovetail.
33% glass-filled nylon with pebble-grain surface, provides secure handling in all weather conditions. Furnished with a complete set of adapters and spacers for installation on 12 ga. Mossberg 500, Maverick 88, Remington 870, and Winchester 1200/1300 pump shotguns. Easy to install, requires no modifications to firearm. Tactical-black, nylon-resin, folding shotgun stock mounts to the rear of the receiver and quickly flips open/closed to accommodate a variety of situations. Closes for maximum maneuverability and compact transportation; opens easily and latches securely for optimum accuracy. Ultra-comfortable pistol grip provides additional control. Latch can be reversed for right- or left- ha SPECS: Nylon polymer, black. Pistol grip – 2-3⁄8″ (6cm) wide, 3½” (9cm) tall, 13⁄16″ (3cm) thick. Approximately 13¾” (35cm) L.O.P. Fits Mossberg 500/590, Maverick 88, Remington 870, Winchester 1200/1300.
Folding buttstock reduces overall length by 10 inches to make your 10/22 easier to pack in the field or stow in a vehicle. Injection molded forend features raised checkering and finger grooves in the pistol grip for added control in all weather conditions. Beefy, buttstock pivot pin provides a positive, tight lockup with no “play” or looseness. Hinge includes a release button and uses a heavy duty spring and locking notches to securely hold the buttstock in the folded or open position. Clear, polymer tubing along the top of the buttstock frame prevents direct contact of cheek to metal surface. Hollow handle with rubber plug allows storage of small parts, cleaning supplies and other field nec SPECS: Forend – Synthetic polymer, black. Buttstock – Carbon steel or stainless steel. Approx. 2 lb. 4oz. (1.02kg) wt. Size Folded – 197⁄8″ (50.48cm) long, 3¼ “ (8.25cm) wide. Size Open – 29” (73.7cm) long, 2¼” (5.7cm) wide. 133⁄8″ (34cm) L.O.P.
Folding buttstock reduces overall length by 10 inches to make your 10/22 easier to pack in the field or stow in a vehicle. Injection molded forend features raised checkering and finger grooves in the pistol grip for added control in all weather conditions. Beefy, buttstock pivot pin provides a positive, tight lockup with no “play” or looseness. Hinge includes a release button and uses a heavy duty spring and locking notches to securely hold the buttstock in the folded or open position. Clear, polymer tubing along the top of the buttstock frame prevents direct contact of cheek to metal surface. Hollow handle with rubber plug allows storage of small parts, cleaning supplies and other field nec SPECS: Forend – Synthetic polymer, black. Buttstock – Carbon steel or stainless steel. Approx. 2 lb. 4oz. (1.02kg) wt. Size Folded – 197⁄8″ (50.48cm) long, 3¼ “ (8.25cm) wide. Size Open – 29” (73.7cm) long, 2¼” (5.7cm) wide. 133⁄8″ (34cm) L.O.P.
Maximum compactness for convenient carry, with an ultra-smooth mechanism that locks open securely. Liner-lock release is flush ground with the handle, so it won’t accidentally activate when you’re grasping the knife; requires a positive, but not difficult, effort to release the lock, so the blade closes only when you want it to. Four-position spring steel clothing clip accommodates multiple carry options. Crucible II has the spear-point blade and ergonomic features of the fixed-blade Crucible FX2 in a streamlined folding package that extends with a quick flick of either thumb. Liners are of low-friction, cutlery-grade 420J stainless steel, with full-surface textured G10 grip p SPECS: Crucible II – Blade: AUS8A stainless steel, black Teflon coating. Liners: 420J stainless steel. Handle: G10 fiberglass, matte black. 77⁄8” (18.1cm) OAL extended, 4¾” (12.1cm) closed, 3¼” (8.3cm) long blade. Hornet II Auto – Blade: CPM15
Maximum compactness for convenient carry, with an ultra-smooth mechanism that locks open securely. Liner-lock release is flush ground with the handle, so it won’t accidentally activate when you’re grasping the knife; requires a positive, but not difficult, effort to release the lock, so the blade closes only when you want it to. Four-position spring steel clothing clip accommodates multiple carry options. Crucible II has the spear-point blade and ergonomic features of the fixed-blade Crucible FX2 in a streamlined folding package that extends with a quick flick of either thumb. Liners are of low-friction, cutlery-grade 420J stainless steel, with full-surface textured G10 grip p SPECS: Crucible II – Blade: AUS8A stainless steel, black Teflon coating. Liners: 420J stainless steel. Handle: G10 fiberglass, matte black. 77⁄8” (18.1cm) OAL extended, 4¾” (12.1cm) closed, 3¼” (8.3cm) long blade. Hornet II Auto – Blade: CPM15
Folds down when not in use. Strong spring secures sight in “up” or “down” position. The reversible notch piece gives choice of “U” or “V” notch. Three styles and two heights of these sights are available and fit most standard rear sight dovetails. The chart shows the overall sight height for those sights below.69 & 69W – Height, .360″ (9.1mm) to .490″ (12.4mm).69H & 69WH – Height, .460″ (11.7mm) to .590″ (15mm). Flat Top Folding Leaf Sight – No. 69EH and No. 69H are .096” (2.4mm) higher than standard folding leaf; EH model adjusts for elevation from .538” to .657”. Blade & Screw replacement parts av
The A.R.M.S. #41 B Silhouette Front Folding Sight features an integral gas block and fits standard size 750 barrels. This sight addresses the problems of standard triangle shape non-folding front sights, utilizing a rugged spring loaded angled support system. This angled system helps eliminate snags in brush and other hazards. It also uses the standard front sight post. Comes complete with a non-reflective black finish and included adjustment wrench. Specs: Fits size 750 barrels, Folding design, Angled support, Black finish, Included adjustment wrench
Integral gas block and folding front sight replicates the strength and appearance of the classic factory AR-15/M16 front sight tower, yet folds neatly out of the way when it’s not needed. Patent-pending, weight-saving, all-in-one design; no need to purchase a railed gas block and a separate rail-mount folding sight. Deploys and locks securely open with the flick of a finger—as fast as any flip-up combat sight. To fold, press straight down on the top of the diagonal rear support to release the lock while pulling back on the sight tower. Standard, A2-type sight post is the same height as factory post, so it works with any factory height rear sight. Easy to install; dual clamping rings fit stan SPECS: Steel and aluminum, matte black finish. Fits barrels that are .750” O.D. at the gas port.
Adjust sling from carry to firing while moving into position. After firing, a quick tug on the lanyard returns sling to carry position. Designed to carry gun, muzzle down on your back. Padded model features a closed-cell foam shoulder pad for greater comfort when carrying heavy weapons long distances. Buttstock Adapter provides correct, top-of-stock sling mount point. SPECS: Nylon web, black. 1″ (2.5cm) wide. Padded model includes 20″ (50.8cm) long x 1-7⁄8″ (4.7cm) wide shoulder pad. Adjusts 58″ (147cm) to 63″ (160cm).
Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Sight post flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as factory sights, simplifying integration of these sights on your rifle. Base with sturdy side clamp and heavy duty stainless steel crossbolt attaches to any military or commercial Picatinny rail. Installs with a standard flathead screwdriver—no protruding knobs or levers to catch on brush, clothing, or othe SPECS: Stainless steel and aluminum, Black or Dark Earth finish. Rear – 1.17” (3cm) long, 1.25” (3.2cm) wide, 1.85” (4.7cm) high extended. 1.8 oz. (52g) wt. HK Front – 1.17” long, 1.25” wide, 1.9” (4.9cm) high extended. 1.6 oz. (45g) weight. M4/M16 Front – 1.17” long, 1.25” w
Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Sight post flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as factory sights, simplifying integration of these sights on your rifle. Base with sturdy side clamp and heavy duty stainless steel crossbolt attaches to any military or commercial Picatinny rail. Installs with a standard flathead screwdriver—no protruding knobs or levers to catch on brush, clothing, or othe SPECS: Stainless steel and aluminum, Black or Dark Earth finish. Rear – 1.17” (3cm) long, 1.25” (3.2cm) wide, 1.85” (4.7cm) high extended. 1.8 oz. (52g) wt. HK Front – 1.17” long, 1.25” wide, 1.9” (4.9cm) high extended. 1.6 oz. (45g) weight. M4/M16 Front – 1.17” long, 1.25” w
Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Sight post flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as factory sights, simplifying integration of these sights on your rifle. Base with sturdy side clamp and heavy duty stainless steel crossbolt attaches to any military or commercial Picatinny rail. Installs with a standard flathead screwdriver—no protruding knobs or levers to catch on brush, clothing, or othe SPECS: Stainless steel and aluminum, Black or Dark Earth finish. Rear – 1.17” (3cm) long, 1.25” (3.2cm) wide, 1.85” (4.7cm) high extended. 1.8 oz. (52g) wt. HK Front – 1.17” long, 1.25” wide, 1.9” (4.9cm) high extended. 1.6 oz. (45g) weight. M4/M16 Front – 1.17” long, 1.25” w
Flip-up front sight deploys with the flick of a finger to provide instant back-up to keep you in the fight if your Sig 556’s primary optics or laser sight fails. Fits the factory dovetail on the gas block, and is the correct height to allow use of any Midwest Industries AR-15 flip-up rear sight. Uses standard A2 front sight post to ensure correct sight picture and easy adjustment using an A2 front sight tool. Super-smooth pivot mechanism with sturdy ball-bearing detent locks positively in the raised position and stays locked until you hit the pushbutton release. Folds down neatly out of your sight path when not in use. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black.
Five-position locking system with push-button release allows the grip to be extended 90° from handguard or at a 45° forward or rearward angle. Folds parallel with the handguard, forward or rearward, when not in use. Clamps to rail with a steel crossbolt. SPECS: 4½” long when extended.
Lightweight, DuPont Zytel® plastic stock folds out of the way for maximum portability and compact storage. Ideal for close-quarter situations where maneuverability is necessary. Pistol grip provides increased grip surface for better control. Steel hinge housing and arm stand up to rugged use. Opens easily and locks into place for sturdy support for conventional shooting. Closes by pushing detent release button on the hinge. All models include integral 1″ swivels for mounting tactical slings and 1″ recoil pad. Drop-in design requires no fitting. SPECS: Zytel plastic, black. 29″ (73cm) long open, 19.5″ (49.5cm) folded. M1 fits military issue only. 10/22 & SKS models include handguard.
Adjust-A-Height foot stool converts any chair into a relaxation station where you can comfortably elevate your legs while you read, watch TV or take a nap. The foam-filled, decorative cushion helps absorb the built-up tension in your legs,feet and lower back. The accordion style wooden frame opens for use or folds flat for storage. Features locking casters for sturdy support. Wood, fabric, 15 x 12…
Hamper Stand with Foot Pedal Durable, chrome plated frame, metal, foot-pedal operated lid, soft rubber casters (two locking), vinyl pouch for bag storage, vinyl-coated ring to hold bag in place. Fits 18″ reusable hamper bags or 33 gal disposable bags….
INDICATIONS: Medline Bariatric Extra Wide Two Button Folding Walker is easy to use push button mechanisms that may be operated by the fingers, palm or side of hand, each side of this lightweight walker operates independently….
Pubes getting trapped in folds of foreskin. Advice?
I realize my pubes always gets trapped between the folds of the foreskin. Any advice on how I can avoid this? I wear tighty whities and it hurts whenever I pull the hair from the foreskin whenever I am adjusting my penis during an erection.
nate dude you can trim your pubes so they dont get caught in the skin sometimes you have to do that when they get long I admit i trim them from time to time. Dont shave them off just a trim will take care of the problem dude there is nothing wrong with a little man grooming pubes unibrow ear hair dude it is about looking good and feeling comfortable.
