Hays Shooting Sports: Recreational Firearms & Ammunitions

Shooting Sports Resources – Reviews – Supplies

OPEN RED DOT SIGHT MULTI-RETICLE RED DOT SIGHT – BLACK $84.99 These sights offer unlimited eye relief and a wide field of view, making them extremely versatile for sport, tactical, and hunting applications. Shock-resistant up to .50 caliber for reliable service on almost any firearm platform. Integral, weaver-style base on all models gives rock-solid mounting and easy installation. Water- and shock-resistant sights feature a tubeless design for maximum simplicity and minimal weight. Special lens coatings completely eliminate double dot and split images. Tru-Point model features a 4 MOA, red, aiming dot for quick sighting. “Auto Mode” uses a light-sensitive rheostat for automatic brightness control; “Manual Mode” overrides rheostat for fixed brightness SPECS: Aluminum body, black, matte finish. Includes instructions, lens cover, and CR2032 battery. Tru-Point – 1.97″ (5cm) long x 1.1″ (2.8cm) wide. 1.7 oz. wt. 1X magnification, 26mm window. FOV – 42′ at 100 yd. MR/DC – 3.3″ (8.4cm) long x 1.4″ (3.5cm) wide. 4.1 oz. wt. 1X magnification, 34mm win

OPEN RED DOT SIGHT TG8300B RED DOT SIGHT SERIES TRU-POINT $414.23 These sights offer unlimited eye relief and a wide field of view, making them extremely versatile for sport, tactical, and hunting applications. Shock-resistant up to .50 caliber for reliable service on almost any firearm platform. Integral, weaver-style base on all models gives rock-solid mounting and easy installation. Water- and shock-resistant sights feature a tubeless design for maximum simplicity and minimal weight. Special lens coatings completely eliminate double dot and split images. Tru-Point model features a 4 MOA, red, aiming dot for quick sighting. “Auto Mode” uses a light-sensitive rheostat for automatic brightness control; “Manual Mode” overrides rheostat for fixed brightness SPECS: Aluminum body, black, matte finish. Includes instructions, lens cover, and CR2032 battery. Tru-Point – 1.97″ (5cm) long x 1.1″ (2.8cm) wide. 1.7 oz. wt. 1X magnification, 26mm window. FOV – 42′ at 100 yd. MR/DC – 3.3″ (8.4cm) long x 1.4″ (3.5cm) wide. 4.1 oz. wt. 1X magnification, 34mm win

FASTFIRE? RED DOT REFLEX SIGHT 410321 1911 STANDARD MOUNT $64 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting. Stainless steel and aluminum housing built to handle magnum shotgun allows slide mounting. Originally developed for military and law enforcement use, FastFire’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’t interfere with peripheral vision, so the operator can maintain better situational awareness. A high-intensity LED projects a 4 MOA red sighting dot on the heads-up display, while a light sensor and integrated control circuitry adjust the dot’s SPECS: Sight – Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Mounts – Aluminum, matte black. Mounting screws included.

FASTFIRE? RED DOT REFLEX SIGHT 410322 1911 NOVAK MOUNT $64 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting. Stainless steel and aluminum housing built to handle magnum shotgun allows slide mounting. Originally developed for military and law enforcement use, FastFire’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’t interfere with peripheral vision, so the operator can maintain better situational awareness. A high-intensity LED projects a 4 MOA red sighting dot on the heads-up display, while a light sensor and integrated control circuitry adjust the dot’s SPECS: Sight – Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Mounts – Aluminum, matte black. Mounting screws included.

FASTFIRE? RED DOT REFLEX SIGHT 410326 GLOCK MOUNT, ALL MODELS $64 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting on handguns, rifles, and tactical shotguns. Stainless steel and aluminum housing built to handle the recoil of magnum shotgun loads and installed weight under 2 ounces allow mounting on a semi-auto pistol slide. Originally developed for military and law enforcement use, FastFire’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’t interfere with peripheral vision, so the operator can maintain better situational awareness. Equally effective for sporting SPECS: Sight – Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Mounts – Aluminum, matte black. Mounting screws included.

FASTFIRE? RED DOT REFLEX SIGHT 410328 SPRINGFIELD XD MOUNT $64 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting on handguns, rifles, and tactical shotguns. Stainless steel and aluminum housing built to handle the recoil of magnum shotgun loads and installed weight under 2 ounces allow mounting on a semi-auto pistol slide. Originally developed for military and law enforcement use, FastFire’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’t interfere with peripheral vision, so the operator can maintain better situational awareness. Equally effective for sporting SPECS: Sight – Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Mounts – Aluminum, matte black. Mounting screws included.

FASTFIRE? RED DOT REFLEX SIGHT 410323 KIMBER STD/TARGET/BOMAR MOUNT $64 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting. Stainless steel and aluminum housing built to handle magnum shotgun allows slide mounting. Originally developed for military and law enforcement use, FastFire’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’t interfere with peripheral vision, so the operator can maintain better situational awareness. A high-intensity LED projects a 4 MOA red sighting dot on the heads-up display, while a light sensor and integrated control circuitry adjust the dot’s SPECS: Sight – Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Mounts – Aluminum, matte black. Mounting screws included.

FASTFIRE? RED DOT REFLEX SIGHT 300230 FASTFIRE SIGHT W/PIC/WEAVER MNT $309 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting. Stainless steel and aluminum housing built to handle magnum shotgun allows slide mounting. Originally developed for military and law enforcement use, FastFire’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’t interfere with peripheral vision, so the operator can maintain better situational awareness. A high-intensity LED projects a 4 MOA red sighting dot on the heads-up display, while a light sensor and integrated control circuitry adjust the dot’s SPECS: Sight – Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Mounts – Aluminum, matte black. Mounting screws included.

30mm RED DOT SIGHTS TG8030B RED DOT SIGHT BLACK 30MM $77.28 These sights offer unlimited eye relief and a wide field of view, making them extremely versatile for sport, tactical, and hunting applications. Shock-resistant up to .50 caliber for reliable service on almost any firearm platform. Integral, weaver-style base on all models gives rock-solid mounting and easy installation.Rugged, waterproof and fog-proof sights sights feature a 5 MOA dot size for fast target acquisition, 11 brightness control settings, fingertip windage and elevation adjustments, and lens covers. Multi-coated lenses provide more than 95% light transmission for superior clarity and brightness. Traditional model features a single red-colored dot reticle. Dual Color offers the SPECS: Aluminum body, black, matte finish. 3.75” (9.6cm) long x 2” (6.4cm) wide. 7.9 oz. wt. Includes instructions, lens covers, and CR2032 battery. 1X magnification x 30mm objective.

FASTFIRE II? RED DOT REFLEX SIGHT FASTFIRE II W/PICATINNY MOUNT $324.99 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting on handguns, rifles, and tactical shotguns. Stainless steel and aluminum housing built to handle the recoil of magnum shotgun loads and installed weight under 2 ounces allow mounting on a semi-auto pistol slide. The FastFire II adds to the original FastFire’s platform a gasket bottom plate that seals it 100% against water; sight will continue to function even after being submerged. The FastFire system’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’ SPECS: Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Fits any mount that accepts original FastFire sight.

FASTFIRE II? RED DOT REFLEX SIGHT FASTFIRE II W/O PICATINNY MOUNT $309.99 Extremely compact and lightweight, yet rugged, red dot sight provides fast, accurate, both-eyes-open sighting on handguns, rifles, and tactical shotguns. Stainless steel and aluminum housing built to handle the recoil of magnum shotgun loads and installed weight under 2 ounces allow mounting on a semi-auto pistol slide. The FastFire II adds to the original FastFire’s platform a gasket bottom plate that seals it 100% against water; sight will continue to function even after being submerged. The FastFire system’s panoramic field of view and unlimited eye relief simplify shooting with an unobstructed view of the area around the target for fast target acquisition and precise shot placement. Won’ SPECS: Steel, aluminum, optic-grade glass. 1¾” (4.5cm) long, 1” (2.5cm) wide, 1” high. Includes snap-on cover, CR 2032 lithium battery, windage/elevation scale disc and adjustment tool, instructions. Fits any mount that accepts original FastFire sight.

30mm RED DOT SIGHTS TG8030DB-30MM DUAL COLOR DOT SIGHT $83.08 These sights offer unlimited eye relief and a wide field of view, making them extremely versatile for sport, tactical, and hunting applications. Shock-resistant up to .50 caliber for reliable service on almost any firearm platform. Integral, weaver-style base on all models gives rock-solid mounting and easy installation.Rugged, waterproof and fog-proof sights sights feature a 5 MOA dot size for fast target acquisition, 11 brightness control settings, fingertip windage and elevation adjustments, and lens covers. Multi-coated lenses provide more than 95% light transmission for superior clarity and brightness. Traditional model features a single red-colored dot reticle. Dual Color offers the SPECS: Aluminum body, black, matte finish. 3.75” (9.6cm) long x 2” (6.4cm) wide. 7.9 oz. wt. Includes instructions, lens covers, and CR2032 battery. 1X magnification x 30mm objective.

Bushnell Trophy Red Dot Sight $119.99 Red dot convenience mixed with Bushnell’s Amber Bright optics make the Trophy Red Dot Sight ideal for handgun, shotgun, or rimfire shooting. The Trophy sight features fully coated high-contrast Amber Bright? lenses, a wide-angle field of view, and a fast-focus eyepiece. Windage and elevation adjustments are finger-adjustable in 1/4-MOA increments. This sight can handle any caliber gun, thanks to its one-piece tube and heavy-duty spring clip assembly. Featuring an 11-position brightness control, the Trophy also has a 6 MOA Red Dot reticle or 4 different dial-in electronic Red Dot reticles (3 MOA dot, 10 MOA dot, crosshair, and 65 MOA circle with 3 MOA dot). A Red and Green Dot reticle model for different light conditions is also available. Battery included. Waterproof and fogproof. Includes Weaver?-style rings. The Bushnell Trophy Red Dot Sight features: Amber Bright high contrast optics 1/4 MOA windage and elevation adjustment 11-position reticle brightness control Choice of reticles Red/Green reticle models Battery and mounting rings included

1X32 BLACK MATTE RED DOT SCOPE 1X32 BLACK MATTE RED DOT-RED/GREN TDOT $247.95 This Trophy riflescope helps you quickly distinguish objects with similar color tones for excellent accuracy and optical clarity. It features multi-coated Amber-Bright optics for increased brightness in low-light conditions and is 100-percent waterproof, fog-proof, and shock-proof. SPECS: Dry-nitrogen filled, CR2032 battery, Matte finish, Power/Obj lens: 1×32mm, Length: 6.75/172mm, Reticle: 3 M.O.A. Dot T Dot, Field of view (ft at 100 ft / m at 100m): 44 / 14.6, Weight: 32oz, Mounting length: 5.8 / 146, Click Value in at 100yds / mm at 100m: .25/7.

RED DOT SIGHTS RD00904 SP-1 MATTE SILVER REDOT SIGHT $145.99 Waterproof, shockproof, red dot sight contrasts against shooting backgrounds in low- and regular-light situations for fast, easy, sight pickup on your rifle, handgun, or pistol. Click adjustments for windage and elevation and eleven, dot-intensity settings let you adjust to varying shooting situations. Crystal clear lens is hard coated for scratch resistance and is parallax free. Includes a 2032 lithium battery and weaver -style rings. SPECS: Aluminum, silver or black, matte finish. SP-1 – 3 minute dot, 1″ (2.54cm) O.D. SP-2 – 5 minute dot, 30mm (1.18″) O.D.

RED DOT SIGHTS RD00905 SP-2 MATTE SILVER REDOT SIGHT $145.99 Waterproof, shockproof, red dot sight contrasts against shooting backgrounds in low- and regular-light situations for fast, easy, sight pickup on your rifle, handgun, or pistol. Click adjustments for windage and elevation and eleven, dot-intensity settings let you adjust to varying shooting situations. Crystal clear lens is hard coated for scratch resistance and is parallax free. Includes a 2032 lithium battery and weaver -style rings. SPECS: Aluminum, silver or black, matte finish. SP-1 – 3 minute dot, 1″ (2.54cm) O.D. SP-2 – 5 minute dot, 30mm (1.18″) O.D.

RED DOT SIGHTS RD00004 SP-1 MATTE BLACK REDOT SIGHT $145.99 Waterproof, shockproof, red dot sight contrasts against shooting backgrounds in low- and regular-light situations for fast, easy, sight pickup on your rifle, handgun, or pistol. Click adjustments for windage and elevation and eleven, dot-intensity settings let you adjust to varying shooting situations. Crystal clear lens is hard coated for scratch resistance and is parallax free. Includes a 2032 lithium battery and weaver -style rings. SPECS: Aluminum, silver or black, matte finish. SP-1 – 3 minute dot, 1″ (2.54cm) O.D. SP-2 – 5 minute dot, 30mm (1.18″) O.D.

RED DOT SIGHTS RD00005 SP-2 MATTE BLACK REDOT SIGHT $145.99 Waterproof, shockproof, red dot sight contrasts against shooting backgrounds in low- and regular-light situations for fast, easy, sight pickup on your rifle, handgun, or pistol. Click adjustments for windage and elevation and eleven, dot-intensity settings let you adjust to varying shooting situations. Crystal clear lens is hard coated for scratch resistance and is parallax free. Includes a 2032 lithium battery and weaver -style rings. SPECS: Aluminum, silver or black, matte finish. SP-1 – 3 minute dot, 1″ (2.54cm) O.D. SP-2 – 5 minute dot, 30mm (1.18″) O.D.

TROPHY~ RIFLESCOPE 1×28mm 6 MOA RED DOT RETICLE, MATTE FINISH 1X28 BLACK MATTE RED DOT 6 MOA DOT,BOX $96.95 Take advantage of the situation with the high quality functionality of Bushnell’s Trophy Riflescopes. This scope features Amber Bright multi-coated optics for low light hunting situations, 100% waterproof/fog-proof/shockproof construction, dry-nitrogen filled, and a CR2032 battery. SPECS: Matte black finish, Power / Obj Lens (mm): 1×28, Recticle: 6 MOA Red Dot, Field of view (ft@100ft / m@100m): 68/22.6, Weight (oz / g): 6/170, Length (in / mm): 5.5/140, Eye relief (in / mm): Unlimited, Exit pupil (mm): 28, Click Value in@100 yds / mm@100m: .5/14, Adj Range in@100yds/mm

GLO-DOT SHOTGUN SIGHT TG90 RED GLO-DOT SIGHT $17.05 Lightweight, fiber-optic rod presents a bright, glowing bead for better visibility in both bright and low light hunting conditions. Drill and tap your sight rib to mount permanently behind existing sight bead, or stick on instantly with dual sided tape (included). SPECS: Fiber optic rod, red or green, plastic base, black. 050″ (1.2mm) diameter, 3″ (7.6cm) long.

GLO-DOT II SHOTGUN SIGHT TG92-A RED GLO-DOT II SIGHT $19.51 Bright, high-visibility red or green fiber optic rod snaps in place behind factory front bead on plain barrel 12 or 20 gauge shotgun; no gunsmithing required. Notch in base uses factory bead to locate Glo-Dot II sight correctly along bore axis. SPECS: Black plastic base, red or green fiber optic rod. 2½” overall length. Fits 12 and 20 gauge, un-ribbed barrels .728” (18.5mm) O.D. or larger.

TROPHY~ RIFLESCOPE 1×32mm T-DOT RETICLE, MATTE FINISH 1X32 BLK RED DOT RED/GRN T-DOT TACTICA $247.95 With Amber Bright optics, this Bushnell Trophy Riflescope lets you distinguish what is brown cover and what is a brown target. Its features include increased brightness for low light situations and as well as multi-coated optics, one-piece tube design, 100% waterproof/fog-proof/shockproof construction, dry-nitrogen filled , 1/4 M.O.A. fingertip, audible / resettable windage and elevation adjustment, and a fast-focus eyepiece. See for yourself why hunters across the country herald Trophy scopes as the ideal scopes for Autumn deer woods. SPECS: Matte black finish, Power / Obj Lens (mm): 1 x 32, Recticle: Red/Green T dot, Field of view (ft@100ft / m@100m): 44/14.6, Weight (oz / g): 15.6/442, Length (in / mm): 13.7 / 349, Eye relief (in / mm): Unlimited, Exit pupil (mm): 32, Click Value in@100 yds / mm@100m: 25 / 7, Adj Range in

RedHead Ascent Red Dot Air Rifle Sight $9.99 Easy to use red dot sight for today’s airguns Compact 4.4” sight Choice of red or green dot to match bright or low light shooting conditions Anti-reflective ruby red multi-coated optics Easy to access switch on side of sight Uses 3V lithium battery (included) Comes with rimfire rings Enjoy the clearer sight picture of a red dot sight for your airgun with the RedHead Ascent Red Dot Air Rifle Sight. This easy to use, compact 4.4” sight offers the choice of a red or green dot in your line of sight to match bright or lower light shooting conditions. Anti-reflective ruby red multi-coated optics deliver clear images. Durable ABS housing. Easy to access switch on side of sight. Uses 3V lithium battery (included). Lightweight 2.12 oz. Comes with rimfire rings. Black matte finish.

RedHead Ascent Red Dot Sights $49.99 Durable anodized construction Bright 4 MOA red dot 11-position rheostat switch for different lighting conditions 3V lithium battery included Increase your accuracy on every shot with these affordable, lightweight, compact sights. Featuring rugged, durable anodized construction for years of accurate sighting. Ideal for use on turkey guns, slug guns, handguns and airguns! Sporting a large, bright 4-MOA red dot that can be adjusted for any lighting condition with an 11-position rheostat switch. Available with a built-in (WS) Weaver?-style mount. Powered by 1 long-lasting 3V lithium battery (included). RD30/22 models have a .22 Tip-Off mount for use on rimfire rifles and airguns. Length: 3.8″. Available in Matte, Silver, or AP Green Camo. FOV = Field of View @ 100 yards.

RedHead Pursuit Deluxe Red Dot Sights $79.99 Keep your pistol, shotgun, and bow on target with the RedHead Pursuit Deluxe Red Dot sight. This popular illuminated red dot sighting device gives you a wider field of view for that little extra edge in the field or on the range. Features an 11-position rheostat switch for a full range of light intensities. The illuminated 6 MOA red dot reticle is prefocused so the aiming point always appears against the target for flawless tracking. Sight has a 30mm tube which reveals a 30% wider field of view than standard 1″ tubes. Durable anodized construction. Includes 30mm rings and 3V lithium battery. The Pursuit Deluxe Red Dot Sights feature: 11-position rheostat switch for varying intensities Big 6 MOA red dot reticle 30mm tube for bigger field of view Includes rings and 3V lithium battery Durable anodized construction FOV = Field of View at 100 Yards

TROPHY~ RIFLESCOPE 1×25mm 3 MOA RED DOT RETICLE, MATTE FINISH 1X25 TRS-24 3 MOA RED DOT CR2032 MATTE $219.95 Discover the difference in Bushnell’s Trophy Riflescope. With its Amber Bright multi-coated lens, this high quality scope provides increased brightness for low light hunting situations and as well as a one-piece tube design, 100% waterproof/fog-proof/shockproof construction, dry-nitrogen filled design, and a CR2032 battery. See for yourself why hunters across the country herald Trophy scopes as the ideal scopes for Autumn deer woods. SPECS: Matte black finish, Power / Obj Lens (mm): 1×25, Recticle: 3 MOA Red Dot, Field of view (ft@100ft / m@100m): Unlimited, Weight (oz / g): 3.7/106, Length (in / mm): 2.4/61.8, Eye relief (in / mm): Unlimited, Exit pupil (mm): 22, Click Value in@100 yds / mm@100m: .5/14, Adj Range in@100y

RedHead Ascent Red Dot Laser Sight $39.99 Brilliant 650mm red, straightline beam Projects a 10mm red dot at 10 meters Instant push-button activation Lightweight aluminum housing Shock- and water-resistant The RedHead? Ascent? Laser Sight shoots a brilliant 650nm red straightline beam, producing a highly visible 10mm red dot at 10 meters. Instant push-button activation with only fingertip pressure needed. Lightweight aluminum housing; shock- and water-resistant construction. Includes 3 LR44 batteries plus Weaver?-style and rimfire rings.

TROPHY~ RIFLESCOPE 1×28mm 4 DIAL-IN RED/GREEN ELECTRONIC RET. 1X28 BLK RED DOT 4 DIAL-IN RD/GRN RETI $141.95 Amber Bright optics give you the advantage in any hunting situation with increased brightness and deadly accuracy when it’s needed most. Its features include multi-coated optics, one-piece tube design, 100% waterproof/fog-proof/shockproof construction, dry-nitrogen filled , red dot for bright light, green dot for low light, and a CR2032 battery. SPECS: Matte black finish, Power / Obj Lens (mm): 1×28, Recticle: 4 Dial-in Red/Green electronic, Field of view (ft@100ft / m@100m): 68/22.6, Weight (oz / g): 6/170, Length (in / mm): 5.5/140, Eye relief (in / mm): Unlimited, Exit pupil (mm): 28, Click Value in@100 yds / mm@100m: .5/14, Adj R

LIGHTNING ROD SIGHT 40-060 .150 RED LIGNTNING ROD SIGHT $34.95 Extra long fiber optic rod provides a glowing sight picture that draws your eye to the sight. Open center blade lets in lots of light for a bright red, easy-to-see dot. Works well with ghost ring, v-notch and conventional sights. Includes spare optic rod. SPECS: Steel, black, matte finish. 65° x .330″ x .075″ dovetail. .127″ (3.2mm) wide, .200″ (5mm) high. .820″ (21mm) long.

LIGHTNING ROD SIGHT 40-061 .160 RED LIGHTNING ROD SIGHT $34.95 Extra long fiber optic rod provides a glowing sight picture that draws your eye to the sight. Open center blade lets in lots of light for a bright red, easy-to-see dot. Works well with ghost ring, v-notch and conventional sights. Includes spare optic rod. SPECS: Steel, black, matte finish. 65° x .330″ x .075″ dovetail. .127″ (3.2mm) wide, .200″ (5mm) high. .820″ (21mm) long.

LIGHTNING ROD SIGHT 40-062 .175 RED LIGHTNING ROD SIGHT $34.95 Extra long fiber optic rod provides a glowing sight picture that draws your eye to the sight. Open center blade lets in lots of light for a bright red, easy-to-see dot. Works well with ghost ring, v-notch and conventional sights. Includes spare optic rod. SPECS: Steel, black, matte finish. 65° x .330″ x .075″ dovetail. .127″ (3.2mm) wide, .200″ (5mm) high. .820″ (21mm) long.

LIGHTNING ROD SIGHT 40-064 .240 RED LIGHTING ROD SIGHT $34.95 Extra long fiber optic rod provides a glowing sight picture that draws your eye to the sight. Open center blade lets in lots of light for a bright red, easy-to-see dot. Works well with ghost ring, v-notch and conventional sights. Includes spare optic rod. SPECS: Steel, black, matte finish. 65° x .330″ x .075″ dovetail. .127″ (3.2mm) wide, .200″ (5mm) high. .820″ (21mm) long.

LIGHTNING ROD SIGHT 40-063 .200 RED LIGHTNING ROD SIGHT $34.99 Extra long fiber optic rod provides a glowing sight picture that draws your eye to the sight. Open center blade lets in lots of light for a bright red, easy-to-see dot. Works well with ghost ring, v-notch and conventional sights. Includes spare optic rod. SPECS: Steel, black, matte finish. 65° x .330″ x .075″ dovetail. .127″ (3.2mm) wide, .200″ (5mm) high. .820″ (21mm) long.

TruGlo Red-Dot Scope with Remington 870 Mount $99.99 All TruGlo scopes feature a 5-MOA reticle designed for quick acquisition; dual color (red and green) reticle illumination; a rheostat; multicoated lenses; shock-resistant, waterproof, fogproof construction; and a manufacturer’s limited lifetime warranty. Each includes a bonus see-thru or flip-up lens cap and runs on a 3V CR2032 battery (included). The TruGlo Red-Dot Scope with Remington 870 Mount includes an integral saddle mount for Remington 12-gauge shotguns. Color: Matte Black. Manufacturer model #: TG803DBR.

GLO-DOT SHOTGUN SIGHT TG91 GREEN GLO-DOT SIGHT $17.99 Lightweight, fiber-optic rod presents a bright, glowing bead for better visibility in both bright and low light hunting conditions. Drill and tap your sight rib to mount permanently behind existing sight bead, or stick on instantly with dual sided tape (included). SPECS: Fiber optic rod, red or green, plastic base, black. 050″ (1.2mm) diameter, 3″ (7.6cm) long.

GLO-DOT XTREME SIGHT GLO-DOT XTREME UNIVERSAL SHOTGUN SIGHT $29.99 Magnetically attached, highly visible fiber optic sight provides exceptional sight acquisition in all light conditions. Features four different bases with different internal mounting dimensions that fit a variety of ventilated ribs. Polymer base snaps onto the rib and is held firmly in place with a high-strength magnet for quick installation without screws. Includes one red, green, yellow, and amber fiber optic rod. Rods are easily interchanged using thumb and finger pressure. Notch in base uses factory bead to locate sight correctly along bore axis. Two sets of magnets allow mounting sights on two shotguns with different width ventilated ribs. Includes pocket sized, steel case for convenien SPECS: Bases – Plastic, black. (1) .260” (6.5mm), (1).330” (8.4mm), (1) .420” (10.7mm), (1) .520” (13.2mm) internal dimension. 2” (5.1cm) long. Rods – Polymer, (1) red, (1) green, (1) yellow, (1) amber. 113⁄16″ (2cm) long x .060” (1.5mm) dia. Includes (2) sets of magnets & steel carry case.

TruGlo 2X Red-Dot Multi-Reticle Scope $179.99 Dual color reticle illumination Multicoated lenses Shock-resistant, waterproof, fogproof All TruGlo scopes feature reticles designed for quick acquisition; reticle illumination; a rheostat; multicoated lenses; shock-resistant, waterproof, fogproof construction; and a manufacturer’s limited lifetime warranty. Each includes a bonus see-thru or flip-up lens cap and runs on a 3V CR2032 battery (included). The TruGlo 2X Red-Dot Multi-Reticle Scope features four reticles. Color: Matte Black. Manufacturer model #: TB8030MB2.

TruGlo Red-Dot Multi-Reticle Scope $149.99 Dual-color reticle illumination Rheostat Multicoated lenses Shock resistant, waterproof and fogproof All TruGlo scopes feature reticles designed for quick acquisition; dual color (red and green) reticle illumination; a rheostat; multicoated lenses; shock-resistant, waterproof, fogproof construction; and a mfrs. limited lifetime warranty. Each includes a bonus see-thru or flip-up lens cap and runs on a 3V CR2032 battery (included). The TruGlo Red-Dot Multi-Reticle Scope features four reticles. Color: Matte Black. Manufacturer model #: TG8030MB.

ACOG SCOPE WITH RED CIRCLE DOT RETICLE ACOG 1.5X16 W/ SHORT M16 BASE HOUSING $1090 The smallest, lightest ACOG we offer, the ultra-compact TA44 delivers fast targeting and outstanding mobility on lightweight tactical carbines. Perfect for entry teams and other tactical operators. Dual-illuminated reticle is a bright, easy-to-acquire, red dot within a circle, and modest 1.5x magnification ensures a wide field of view (7.4°, 39 ft. at 100 yards) for fast target acquisition under stress. Mounts directly to A2-type carry handle; tunnel in the integral base allows use of standard-issue sights. SPECS: Forged 7070-T6 aluminum housing, black, anodized, coated lenses. 4.1” (cm) long. 5.1 oz. (145g) weight. 1.5X magnification, 16mm objective lens. Adjustable for windage and elevation.

TROPHY~ RIFLESCOPE 1×28mm 4 DIAL-IN ELECTRONIC RETICLE RED DOT 1X28 BLK MATTE RED DOT 4 DIAL-IN RETIC $128.95 Enjoy the Trophy edge in any hunting situation with increased brightness and deadly accuracy when it’s needed most. Its features include multi-coated optics, one-piece tube design, 100% waterproof/fog-proof/shockproof construction, dry-nitrogen filled, and a CR2032 battery. SPECS: Matte black finish, Power / Obj Lens (mm): 1×28, Recticle: 4 Dial-in electronic, Field of view (ft@100ft / m@100m): 68/22.6, Weight (oz / g): 6/170, Length (in / mm): 5.5/140, Eye relief (in / mm): Unlimited, Exit pupil (mm): 28, Click Value in@100 yds / mm@100m: .5/14, Adj Range in@10

TruGlo Gobble-Stopper Red-Dot Scope $79.99 Dual-color reticle illumination Multicoated lenses Shock resistant, waterproof and fogproof Spare battery compartment with extra battery All TruGlo scopes feature reticles designed for quick acquisition; dual color (red and green) reticle illumination; a rheostat; multicoated lenses; shock-resistant, waterproof, fogproof construction; and a manufacturer’s limited lifetime warranty. Each includes a bonus see-thru or flip-up lens cap and runs on a 3V CR2032 battery (included). The TruGlo Gobble-Stopper Red-Dot Scope is made specifically for turkey hunting and features a detachable, extended sunshade and a reticle specific to turkey hunting. Spare battery compartment with extra battery included. Color: Matte Black. Manufacturer model #: TG8030GB.

AR-15/M16 ACOG TA47 2.0X20 SCOPE TA47-6 2X20 DOT ACOG SCOPE $1090 Lightweight, Compact ACOG, with the exclusive Bindon Aiming Concept (BAC) for quick, both eyes open, aiming. Mounts on the AR-15 carry handle without modifications; allows use of standard issue sights. Dual illumination; fiber optic rod with glowing amber tritium illuminates the aiming Triangle (Tri) or Dot in bright daylight and low light. SPECS: Forged 7070-T6 aluminum housing, black, anodized, coated lenses. 5.3" (13.4cm) long, 5.8 oz.(164 g) wt. 2.0X magnification, 20mm objective lens. Adjustable for windage and elevation.

2D:3D Letter Holder Color: Fire Engine Red $25.00 2D1-LTRHLD-RD Color: Fire Engine Red 2D:3D Letter Holder Shown in Fire Engine Red The 2D:3D collection is designed to go from flat to fabulous in no time. Constructed of powder-coated stainless steel, this desktop letter holder is available in three bold colors – white, gun metal, and fire engine red. It ships flat and is folded easily into shape along pre-cut lines and provides easy, stylish stor…

2D:3D Letter Holder Color: Gun Metal $25.00 2D1-LTRHLD-GM Color: Gun Metal 2D:3D Letter Holder Shown in Fire Engine Red The 2D:3D collection is designed to go from flat to fabulous in no time. Constructed of powder-coated stainless steel, this desktop letter holder is available in three bold colors – white, gun metal, and fire engine red. It ships flat and is folded easily into shape along pre-cut lines and provides easy, stylish storage le…

2D:3D Letter Holder Color: White $25.00 2D1-LTRHLD-WH Color: White 2D:3D Letter Holder Shown in Fire Engine Red The 2D:3D collection is designed to go from flat to fabulous in no time. Constructed of powder-coated stainless steel, this desktop letter holder is available in three bold colors – white, gun metal, and fire engine red. It ships flat and is folded easily into shape along pre-cut lines and provides easy, stylish storage letter…

Leighton Smart Brelli Womens Umbrella $20.00 This smallest auto open and close umbrella takes small to a whole new level! Constructed with a durable steel frame; plastic windproof ribs; easy snap open/close reusable sleeve and a fun bungee cord handle strap….

Leighton Manhattan Auto Open Close Folding Umbrella Teflon coating for extra water and stain resistance, Arc: 43″. This lightweight umbrella boasts a beautiful and comfortable two-tone handle and a small portable windproof frame….

Tiny red dot on penis? Help?

Ok latley i’v had unprotected sex with a girl who has been with 4 other guys. But only 1 the last 2 years. So after 2 years of having no symptoms or getting checked at the doctor. She broke up with her b/f and is with me. Well, i dunno if i had this forever or not, but by accident i notcied a small red dot inside my penis, like at the top where it splits at the opening, its inside, about the size of needle.
the girl have me head and maybe from the sucking like put that dot there. and we’v had sex a few times.

go get checked,,, u can never be too safe good luck

Open Text Web Solutions – Red Dot CMS Environment Sync Tool

BARREL BUTTON THE ORIGINAL BARREL BUTTON (BLACK) $8.25 After making absolutely sure your shotgun is unloaded, the barrel button gives you a place to rest the muzzle during long shooting matches. Sturdy strap fastens securely to the laces of shoes and boots with a heavy-duty snap. Small “nipple” locates barrel so it won’t slip off and jam into the ground, or your toes. Washable and small enough to fit in your pocket. SPECS: Polypropylene strap, black. Button is 1″ (2.5cm) in diameter.

SHOOTING TIMES SHOOTING TIMES (1 YR SUBSCRIPTION) $11.97 A great source for the shooter interested in more than one shooting discipline. Each issue of Shooting Times brings you exciting, authoritative coverage of long guns and handguns, plus ammunition, reloading, optics, and selecting the right gun. Written for both the experienced and novice gun enthusiast, with plenty of coverage of new products and activities in the shooting sports. Published by Primedia. Savings – 75% off cover price.

SHOOTING FROM WITHIN SHOOTING FROM WITHIN BOOK $19.95 By J. Michael Plaxco, 203 pages. 6″ x 9″. Softbound. 150 photos and illustrations. Written by one of the most consistent winners of world-class shooting events. Explains how to take command of your actions and progress beyond any self-imposed limitations. Easy-reading style teaches the personal psychology and close, self-examination methods needed to determine, analyze, and find the answers to your shooting problems. Shows you the “tricks of the trade” and genuine short cuts to avoid learning everything the hard way.

PRACTICAL SHOOTING PRACTICAL SHOOTING 2 DISC SET $39.99 Matt Burkett, Brian Enos, Don Golembieski. DVD, 2-disk set. 155 minutes. Matt teaches the advanced techniques that can improve your skills and opportunity for success in IDPA and IPSC competition. Action-filled chapters place emphasis on stance, setup, sighting, trigger control, eye dominance, strong-and weak-hand, draws, reloads, trigger control and much more. Brian Enos shares information about sighting, cross-dominance and shooting fundamentals. Gunsmith Don Golembieski explains equipment selection and maintenance. DVD format.

MAGAZINE BUTTON HD24H MAGAZINE BUTTON $5.82 MAGAZINE BUTTON

MAGAZINE BUTTON B24 MAGAZINE BUTTON $5.36 MAGAZINE BUTTON

MAGAZINE BUTTON B5152672 MAGAZINE BUTTON $3.74 MAGAZINE BUTTON

SHOOTING GLASSES WIN14 AMBER SHOOTING GLASSES, WIN. $11.95 Strong, lightweight, impact-resistant polycarbonate, wrap-around lens and a tough, molded-plastic frame with two, five-setting, ratchet-action adjustable earpieces provide you with comfortable, customizable, eye protection from 99.9% of all ultraviolet rays and shooting debris. Ergonomically-curved earpieces fit sleekly on the side of your head for added comfort; rubber, non-slip grips keep glasses snug in sweaty, humid environments. Coated with Duramass® scratch-resistant protectant. SPECS: Plastic frame and earpieces; polycarbonate lens with molded nosepiece. Meets ANSI standard Z87.1 for impact-resistance. Mossy Oak models supplied with camo frame. Winchester models supplied with black frame.

SHOOTING GLASSES WIN10 CLEAR SHOOTING GLASSES, WIN. $14.99 Strong, lightweight, impact-resistant polycarbonate, wrap-around lens and a tough, molded-plastic frame with two, five-setting, ratchet-action adjustable earpieces provide you with comfortable, customizable, eye protection from 99.9% of all ultraviolet rays and shooting debris. Ergonomically-curved earpieces fit sleekly on the side of your head for added comfort; rubber, non-slip grips keep glasses snug in sweaty, humid environments. Coated with Duramass® scratch-resistant protectant. SPECS: Plastic frame and earpieces; polycarbonate lens with molded nosepiece. Meets ANSI standard Z87.1 for impact-resistance. Mossy Oak models supplied with camo frame. Winchester models supplied with black frame.

SHOOTING GLASSES WIN19 CLEAR MIRROR SHOOTING GLASSES $11.45 Strong, lightweight, impact-resistant polycarbonate, wrap-around lens and a tough, molded-plastic frame with two, five-setting, ratchet-action adjustable earpieces provide you with comfortable, customizable, eye protection from 99.9% of all ultraviolet rays and shooting debris. Ergonomically-curved earpieces fit sleekly on the side of your head for added comfort; rubber, non-slip grips keep glasses snug in sweaty, humid environments. Coated with Duramass® scratch-resistant protectant. SPECS: Plastic frame and earpieces; polycarbonate lens with molded nosepiece. Meets ANSI standard Z87.1 for impact-resistance. Mossy Oak models supplied with camo frame. Winchester models supplied with black frame.

SHOOTING GLASSES WIN12 GRAY SHOOTING GLASSES, WIN $11.45 Strong, lightweight, impact-resistant polycarbonate, wrap-around lens and a tough, molded-plastic frame with two, five-setting, ratchet-action adjustable earpieces provide you with comfortable, customizable, eye protection from 99.9% of all ultraviolet rays and shooting debris. Ergonomically-curved earpieces fit sleekly on the side of your head for added comfort; rubber, non-slip grips keep glasses snug in sweaty, humid environments. Coated with Duramass® scratch-resistant protectant. SPECS: Plastic frame and earpieces; polycarbonate lens with molded nosepiece. Meets ANSI standard Z87.1 for impact-resistance. Mossy Oak models supplied with camo frame. Winchester models supplied with black frame.

PRACTICAL SHOOTING-BEYOND FUNDAMENTALS PRACTICAL SHOOTING BEYOND, SOFTBOUND $20.95 By Brian Enos, 208 pages. 6″ x 9″. Softbound. 115 photos. A logical and clearly refined approach of self-examination that will teach any shooter how to cure their own shooting problems. Contains exercises to teach grip, stance, draw, reloading, trigger control and timing. How to develop and sharpen your skills, worthwhile equipment, advanced shooting techniques, strategies, tactics, plus how to prepare for matches.

PRECISION SHOOTING THE M1 GARAND SHOOTING THE M1 GARAND BOOK $12.95 Roy Baumgardner. 142 pages. 5-1/2″ x 8-1/2″. Softbound. This collection of articles from Precision Shooting gives seventeen chapters of low cost procedures that M1 owners can perform to improve their rifle’s performance for competition and recreational shooting. From muzzle crowning to glass bedding, the many tips and tricks that turn the issue M1 into an accurate match rifle are clearly presented in layman’s terms.

LIMBSAVER PROTECTIVE SHOOTING PAD LIMBSAVER PROTECTIVE SHOOTING PAD $39.99 Strap on the pad and immediately reduce felt recoil and shooting discomfort for increased accuracy. Lightweight, protective pad is worn on the shooting shoulder and is fully reversible; can be worn by either right- or left-hand shooters. Incorporates the exclusive NAVCOM III rubber material engineered to disperse recoil across the variable sized surface nodes. The shooting pad is enclosed in a durable, nylon, one-size fits all harness/pouch with easily adjustable cotton straps, elastic expansion band and quick-release nylon buckle for all-day wearing comfort. Pad is easily removable from the harness for washing. SPECS: Cordura nylon harness, cotton straps, O.D. green. 7.5 oz (212g) wt.

LIMBSAVER PROTECTIVE SHOOTING PAD PROTECTIVE SHOOTING PAD-BLACK $42.99 Strap on the pad and immediately reduce felt recoil and shooting discomfort for increased accuracy. Lightweight, protective pad is worn on the shooting shoulder and is fully reversible; can be worn by either right- or left-hand shooters. Incorporates the exclusive NAVCOM III rubber material engineered to disperse recoil across the variable sized surface nodes. The shooting pad is enclosed in a durable, nylon, one-size fits all harness/pouch with easily adjustable cotton straps, elastic expansion band and quick-release nylon buckle for all-day wearing comfort. Pad is easily removable from the harness for washing. SPECS: Cordura nylon harness, cotton straps, O.D. green. 7.5 oz (212g) wt.

SAFETY BUTTON 70001 SAFETY BUTTON M4 $23.21 SAFETY BUTTON

SAFETY BUTTON C5A527 SAFETY BUTTON, CX4 $81.28 SAFETY BUTTON

BUTTON, DISASSMBLY C55571 BUTTON, DISASSMBLY 8000 SERIES $8.68 BUTTON, DISASSMBLY

MAGAZINE BUTTON HS-M1524 MAGAZINE BUTTON, ALL MODELS $5.99 MAGAZINE BUTTON

CANVAS SHOOTING BAGS BROWNELLS SHOOTING BAG $4.99 Because most of the big ammo companies have gone to plastic shot bags, finding those extra heavy-duty, canvas types we Ol’ Timers used to shoot off is almost impossible. That’s why our gang decided to bring them back in better form than ever! We kept things simple, like they used to be…just good-old-fashioned, rugged and dependable, 10oz. heavy-weight duck canvas bags that hold whatever fill medium you want to put inside. Whether you need a bunch for the guys at your local gun club or just a few for out on the prairie dog towns, they provide excellent stability, portability, and no-scratch support for the forend and buttstock when precise accuracy is absolutely critical. More robust than s SPECS: 10 oz. heavy-weight duck canvas, natural canvas color w/brown silkscreen. 12″ (30.5cm) long x 6″ (15.2cm) wide. Fill media not included.

SHOOTING RANGE BOX SHOOTING RANGE BOX $49.99 Durable, polypropylene box stores and organizes all your gear, plus holds your shotguns and rifles during cleaning and minor gunsmithing. Two-piece design features a removal top box that can be carried separately; includes plenty of space for jags, brushes, patches and 20-round ammo boxes. Separate bottom box is deep enough to hold 100-round ammo boxes and most solvent containers. Removal gun forks with over-molded rubber hold guns firmly without damage. Three, convenient slots hold rifle, shotgun, and muzzleloader cleaning rods and keep them out of the way. Includes a convenient gauge for easy brush and jag diameter identification. Polypropylene construction is resistant to most solvents. SPECS: Polypropylene, dark green. OAL – 24½” (62cm) long, 11½” (29cm) wide, 8¼” (21cm) high. Top section – 24½” long, 11½” wide, 3¼” (8.2cm) high. Bottom section – 24½” long, 9¾” (24.7cm) wide, 5¼” (13.3cm) high.

TOURNAMENT SHOOTING BAG BLACK TOURNAMENT SHOOTING BAG $139 Durable, 600 denier nylon construction with enough pouches and compartments to keep your range gear neat and organized. Includes two inside gun pouches, five outside compartments, eight mag pouches, a detachable brass bag and a water bottle pouch w/bottle. Removable inner bag has two zippered gun pouches, plus three compartments with removable dividers and a plastic reinforcing plate in the bottom. Main bag, inner bag, pouches and compartments have a high density foam padding to protect your equipment from bumps and dings. Features all steel hardware and heavy duty YKK MAX zippers for maximum durability; rubber feet add stability, protect bag from abrasion. Carry handle s SPECS: 600D Cordura-type nylon, black. 25″ (63.5cm) long, 17″ (43.2cm) wide, 11″ (28cm) high.

SHOOTING GLASSES #114 AMBER SHOOTING GLASSES, MOSSY OAK $11.95 Strong, lightweight, impact-resistant polycarbonate, wrap-around lens and a tough, molded-plastic frame with two, five-setting, ratchet-action adjustable earpieces provide you with comfortable, customizable, eye protection from 99.9% of all ultraviolet rays and shooting debris. Ergonomically-curved earpieces fit sleekly on the side of your head for added comfort; rubber, non-slip grips keep glasses snug in sweaty, humid environments. Coated with Duramass® scratch-resistant protectant. SPECS: Plastic frame and earpieces; polycarbonate lens with molded nosepiece. Meets ANSI standard Z87.1 for impact-resistance. Mossy Oak models supplied with camo frame. Winchester models supplied with black frame.

SHOOTING GLASSES #119 CLEAR/MIRROR MOSSY OAK SHOOTING G $11.45 Strong, lightweight, impact-resistant polycarbonate, wrap-around lens and a tough, molded-plastic frame with two, five-setting, ratchet-action adjustable earpieces provide you with comfortable, customizable, eye protection from 99.9% of all ultraviolet rays and shooting debris. Ergonomically-curved earpieces fit sleekly on the side of your head for added comfort; rubber, non-slip grips keep glasses snug in sweaty, humid environments. Coated with Duramass® scratch-resistant protectant. SPECS: Plastic frame and earpieces; polycarbonate lens with molded nosepiece. Meets ANSI standard Z87.1 for impact-resistance. Mossy Oak models supplied with camo frame. Winchester models supplied with black frame.

EVIL ROY SHOOTING SCHOOL PISTOL DVD EVIL ROY SHOOTING SCHOOL PISTOL DVD $29.95 Evil Roy Shooting School (ERSS), Inc. DVD format. Renowned, champion Cowboy Action shooter, Gene Pearcey, aka “Evil Roy,” guides the beginner and seasoned shooter alike, through the steps to become a successful competitor. His skill and practical approach to teaching makes Evil Roy the most sought after instructor in SASS history. ERSS PISTOL DVD is 68 minutes. A must have for all single action revolver owners and shooters, as well as all handgun competitors. Includes the fundamentals of good shooting, plus tips on correcting vision for shooting, stance, target-to-target transitions, shooting drills and much, much more.

MAGAZINE LATCH BUTTON 100956 MAGAZINE LATCH BUTTON $3.56 MAGAZINE LATCH BUTTON

TAKE DOWN BUTTON 315230000 TAKE DOWN BUTTON $21.44 TAKE DOWN BUTTON

BUTTON, DISASSEMBLY 84F/85F C55967 BUTTON, DISASSEMBLY 84F/85F $15.13 BUTTON, DISASSEMBLY 84F/85F

DISASSEMBLY BUTTON, 90TWO C5C193 DISASSEMBLY BUTTON, 90TWO $19.19 DISASSEMBLY BUTTON, 90TWO

SAFETY BUTTON, BLACK 60414 SAFETY BUTTON, BLACK $12.36 SAFETY BUTTON, BLACK

MAGAZINE CUTOFF BUTTON 60777 MAGAZINE CUTOFF BUTTON $8.91 MAGAZINE CUTOFF BUTTON

EJECTOR LIFT BUTTON R00461 EJECTOR LIFTER BUTTON $4.58 EJECTOR LIFT BUTTON

SAFETY BUTTON SCREW 11125 SAFETY BUTTON SCREW $5.99 SAFETY BUTTON SCREW

SAFETY BUTTON, PLASTIC 13133 SAFETY BUTTON, PLASTIC $5.5 SAFETY BUTTON, PLASTIC

MAGAZINE FOLLOWER BUTTON A02515 MAGAZINE FOLLOWER BUTTON $3.58 MAGAZINE FOLLOWER BUTTON

CARRIER LATCH BUTTON B1111094 CARRIER LATCH BUTTON $6.76 CARRIER LATCH BUTTON

CARRIER LATCH BUTTON B1111092 CARRIER LATCH BUTTON $6.81 CARRIER LATCH BUTTON

CARRIER LATCH BUTTON B1111093 CARRIER LATCH BUTTON $6.99 CARRIER LATCH BUTTON

MAGAZINE RELEASE BUTTON SP62032 MAG RELEASE BUTTON $6.85 MAGAZINE RELEASE BUTTON

RedHead Baffle Shooting Plugs $9.99 Light, simple, effective hearing protection for the shooting range. 1 pair.

THE TOP SHOOTER’S GUIDE TO COWBOY ACTION SHOOTING COWBOY ACTION SHOOTING PART II, VIDEO $24.95 THE TOP SHOOTER’S GUIDE TO COWBOY ACTION SHOOTING – Bar H Productions. 70 minute video. Meet some of the stars of cowboy action and watch them demonstrate many time-saving, match-winning techniques. Teaches the basics of gripping and cocking the gun, shows “speed” reloading techniques, how to move through a stage and more. Covers handgun, lever action rifle, Winchester 97 and double barrel shotguns. DVDformat only.COWBOY ACTION SHOOTING Part II – Bar H Productions. 60 minute video. The stars of cowboy action shooting show you how to fine tune your shooting skills. Sharpening mental preparedness, detecting wasted motion, developing a personal rhyth

LEATHER GLOVES 8999-1 SMALL SHOOTING GLOVES, BLACK $31.78 Soft, supple, top-grain cowhide gloves give you better control over your gun during competition, tactical or hunting situations. Stretch-Lycra® panels and a velcro wrist strap provide excellent fit and ventilation. Shooting Gloves include a thin, gel foam padding sewn between layers of soft, supple, top-grain cowhide to diminish recoil fatigue. Cut-off fingertips for great “feel”. SPECS: Leather and lycra. Black.

EVIL ROY SHOOTING SCHOOL SHOTGUN DVD EVIL ROY SHOOTING SCHOOL SHOTGUN DVD $29.95 Evil Roy Shooting School (ERSS), Inc. DVD format. Renowned, champion Cowboy Action shooter, Gene Pearcey, aka “Evil Roy,” guides the beginner and seasoned shooter alike, through the steps to become a successful competitor. His skill and practical approach to teaching makes Evil Roy the most sought after instructor in SASS history. ERSS SHOTGUN DVD is 45 minutes. Gives you the know how to compete with the world’s finest pump action and side-by-side, double barrel shotgun shooters. Covers everything from proper shotgun fit to speed loading and hip shooting.

SHOOTING CHRONY BALLISTIC PRINTER BALLISTIC CHRONY PRINTER $100.5 Great time saver at the range. No worry about writing down each shot, the wind blowing your paper away or forgetting to bring a pencil. A 14 foot cord connects to Alpha, Beta and Gamma, Master or Shooting Chronys. Easy-to-carry, compact size, prints velocity as you shoot, or velocity and stats after each shot string. Uses (4) AA batteries (included) and standard 1.5″ paper rolls. SPECS: 7.5″ (19cm) long, 3.75″ (9.5cm) wide, 1.5″ (3.8cm) high. 11.9oz. (337g) weight.

MAGAZINE CATCH BUTTON AR-L141-62032 AR MAGAZINE CATCH BUTTON $3.8 MAGAZINE CATCH BUTTON

SLIDE STOP BUTTON, BLUE 060810001 SLIDE STOP BUTTON, BLUE $4.98 SLIDE STOP BUTTON, BLUE

MAGAZINE CATCH BUTTON, ALUMINUM LR-17 MAGAZINE CATCH BUTTON, ALUMINUM $3 MAGAZINE CATCH BUTTON, ALUMINUM

PICK UP SPRING BUTTON HD28 PICK UP SPRING BUTTON $8.25 PICK UP SPRING BUTTON

BUTTON, MAGAZINE RELEASE 84F C53199 BUTTON, MAGAZINE RELEASE 84F $24.36 BUTTON, MAGAZINE RELEASE 84F

BUTTON, MAG RELEASE, 85F/86/89 C53159 BUTTON, MAG REL 85F/86/89 $23.05 BUTTON, MAG RELEASE, 85F/86/89

MS Xbox 360 Wireless Game Controller w/ Dual Hidden Rapid Fire Trigger Buttons All you have to do is hold down the extra button located on the under side of the controller and it will be like you are pressing the trigger as fast as 15 times a second. This controller will help you dominate in any first person shooter game….

Canon 12.1MP Camera With 6x Image Stabilized Optical Zoom And 2.5 inch LCD,Face Detection technology and in-camera red-eye fix,21 shooting modes, including 9 special scene modes, Print/Share button $499.95 Image resolution up to 4000 x 3000,4x digital zoom,DiG.C III Image Processor with Optical Image Stabilizer,Face Detection Technology sets the focus, exposure and flash automatically,Easy-to-use Mode Dial with a wide range of shooting modes from fully manual to fully automatic; including night snapshot mode, which reduces image blur in low-light shooting,Print/Share Button for easy direct printing …

Pentax BG-10 for MZ-S – AA Battery Pack/Grip with vertical shooting release button 2/8/200615-19-33……

Blackhawk Olive Drab Tactical Pants Durable wrinkle, fade, and stain resistant 8.5 ounce cotton canvas. Double layering in the seat and knees for increased wear and protection. Crotch gusset allows increased movement. Extra-Wide reinforced belt loops accommodate BlackHawk CQB Rigger Belt (and other belts up to 1.75″ wide). Hidden expandable waistband slides to increase waist size by up to 2 inches. Rubber grip strips in waistband ke…

Russell Outdoors Men’s Explorer Long Sleeve Shirt $34.99 *Button-down collar *Double and triple-needle stitching details *Two large inverted pleat chest pockets with button-flap closures *Pleated and button-placket sleeve cuffs *Back shoulder pleats *Extra-long curved shirt-tail *Logo neck tape *Fabric: 60% cotton/40% polyester brushed twill *Some larger sizes require additional charges…

What button does the PS3 use to shoot?

I’ve heard it’s the top R button closest to me but, on the xbox it’s the bottom R button. So, If you can tell me wether it’s the top or bottom R button to shoot for Ex. CoD4 that’d be great.

i think in most ps 3 games to shoot you use the r1 button but usually you have a few choices for your button mapping or you can set them up to what you want.just go to options then controller and check it out.hope this helps.have fun gaming.

Behind the scenes at the Jenson Button and Lewis Hamilton Shooting (presented by HUGO BOSS TV)

H&K USP PICATINNY RAIL ADAPTER ADPHKSP140 – H&K USP RAIL ADAPTER $9.99 Low-profile adapter clamps securely over factory accessory rail of H&K USP series pistol and allows mounting of weaponlight or laser sight that requires a Picatinny or Weaver-style rail for greater versatility in choosing tactical accessories. No gunsmithing and no permanent alterations to gun required; clamp mount around rail using the included hex head bolts and hex wrench. Lightweight, reinforced molded polymer construction stands up to the battering from sustained fire of full-power ammo. Models available to fit full-size and Compact USP. SPECS: Reinforced molded polymer, matte black. USP – 1-5⁄8″ (4.1cm) long. USP Compact – 1¼” (3.2cm) long. Mounting hardware, hex wrench, and instructions included.

AR-15/M16 RAIL SLING ADAPTER 4393 AR-15/M16 RAIL SLING ADAPTER $22 Solid, one-piece aluminum mount with steel, pivot pin and swivel attaches to any Picatinny or Weaver-style accessory rail for instant sling attachment. Nylon tip set screw locks mount to rail. Quiet, rubber-coated swivel prevents metal-to-metal slap and eliminates sling wear at point of contact. Accepts slings up to 1¼” wide. SPECS: Base – Aluminum. Swivel/Hardware – Steel. Matte black finish. 9⁄16″ (1.4cm) long, 1¼” (3.2cm) wide, 1-5⁄8″ (4.1cm) high. Fits slings up to 1¼” wide.

PICATINNY RAIL BIPOD ADAPTER PICATINNY BIPOD ADAPTER $29.99 Precision machined aluminum and steel adapter clamps securely to bottom of railed handguard to let you mount a bipod that requires a sling swivel stud attachment point. Steel locking bar and three hardened steel hex head screws that also serve as recoil lugs attach to Picatinny and Weaver-style rails for an ultra-solid platform that won’t slip even under heavy recoil. Streamlined design adds minimal bulk and weight to your weapon. SPECS: Hardcoat anodized aluminum and parkerized steel, matte black. 2-5⁄8″ (6.7cm) long, approx. 1-1⁄8″ (2.9cm) wide, extends 7⁄16″ (1.1cm) below rail. 2.9 oz. (81g) weight.

L-RAIL ADAPTER DUAL RAIL SYSTEM SM/COMPACT FRAME $24.99 Bolt-on adapter clamps to your pistol’s existing accessory rail and doubles available rail space for mounting tactical accessories. Lets you mount a laser sight and a weaponlight at the same time, with one accessory on the underside of the receiver, the other positioned along the left or right side. No gunsmithing and no permanent alterations to gun required; clamp the mount around the factory rail using the included hex head bolts and hex wrench. Includes a two-position recoil lug that prevents slippage even during sustained fire of full-power ammo. Compatible with Picatinny and Weaver-style pistol rails and accessories. Available in sizes to fit Large and Compact/Small pisto SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Large – 1¼” (3.2cm) long. Compact/Small – 7⁄8″ (2.2cm) long. Both models include mounting hardware, hex wrench, and instructions.

L-RAIL ADAPTER DUAL RAIL SYSTEM REG/LG FRAME $24.99 Bolt-on adapter clamps to your pistol’s existing accessory rail and doubles available rail space for mounting tactical accessories. Lets you mount a laser sight and a weaponlight at the same time, with one accessory on the underside of the receiver, the other positioned along the left or right side. No gunsmithing and no permanent alterations to gun required; clamp the mount around the factory rail using the included hex head bolts and hex wrench. Includes a two-position recoil lug that prevents slippage even during sustained fire of full-power ammo. Compatible with Picatinny and Weaver-style pistol rails and accessories. Available in sizes to fit Large and Compact/Small pisto SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Large – 1¼” (3.2cm) long. Compact/Small – 7⁄8″ (2.2cm) long. Both models include mounting hardware, hex wrench, and instructions.

UIT (ANSCHUTZ) RAIL MOUNT 150-801-ALL-STEEL UIT RAIL W/HARDWARE $89.95 Fully enclosed UIT rail enables mounting of your choice of Versa-Pod on almost any rifle with enough forearm area to allow inletting for custom installation of this rail. Machined from strong 1045 carbon steel, the rail comes with a QD swivel stud that rides in the slot and accepts Model 1, 2, and 3 Versa-Pods and the Universal Adapter. Includes mounting hardware and a 15/8″ sling loop. SPECS: Steel, black oxide finish. 6.7 oz. (189g) weight. 9” (22.9cm) O.A.L., ¾” (1.9cm) wide. Slot is 7½” (19.1cm) long. Gunsmith inletting of stock required.

H&K USP PICATINNY RAIL ADAPTER ADPHKCP140-H&K USP COMPACT RAIL ADAPT $9.99 Low-profile adapter clamps securely over factory accessory rail of H&K USP series pistol and allows mounting of weaponlight or laser sight that requires a Picatinny or Weaver-style rail for greater versatility in choosing tactical accessories. No gunsmithing and no permanent alterations to gun required; clamp mount around rail using the included hex head bolts and hex wrench. Lightweight, reinforced molded polymer construction stands up to the battering from sustained fire of full-power ammo. Models available to fit full-size and Compact USP. SPECS: Reinforced molded polymer, matte black. USP – 1-5⁄8″ (4.1cm) long. USP Compact – 1¼” (3.2cm) long. Mounting hardware, hex wrench, and instructions included.

PICATINNY RAIL ADAPTER PICATINNY RAIL ADAPTER $49.95 Attaches to rail with an oversized, ½” knob; tighten by hand or a wrench for rock-solid stability. SPECS: Steel, matte black. ½” clamping knob. Attaches to Picatinny rail systems with no permanent modifications.

VERSA POD 150-603 AR15 PICATINNNY RAIL ADAPTER $40.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black.

AR-15/M16 TRIPLE RAIL HANDGUARD MOUNT AR-15 TRIPLE RAIL HANDGUARD MOUNT $20.39 Compact, Picatinny rail system greatly expands the accessory mounting options on AR-15/M16 rifles with A2-style handguards, while keeping clutter to a minimum. Mounts on top or bottom of handguard to provide fixed side rails positioned 45 degrees left and right of center, plus a center rail that can be positioned up to 1¼” forward of the mount, or completely removed for unobstructed use of iron sights. Fits both, standard and thickened heat shields. Made from tough, fiber-filled polymer composite. SPECS: Fiber-filled polymer composite, black. 3-1⁄8″ (8cm) long center rail, 2½” (6.3cm) long left and right rails, 2½” (6.3cm) wide, 1¼” (3.2cm) high. 1.8 oz. (51g) weight.

AR-15/M16 FRONT SIGHT SLING ADAPTER WITH RAIL FRONT SIGHT SLING ADAPTER W/ RAIL $29.95 Heat-resistant, graphite sling adapter attaches to the left side your front A2 sight with two screws and securely holds your sling in place. Picatinny rail allows for the mounting of an additional accessory for mission-specific configurations. Adapter installs with no special tools and no permanent modifications to the sight, accepts 1¼” (3.2cm) slings. SPECS: Heat-resistant graphite, black. Picatinny rail is 1.5″ (3.7cm) long. Fits A2 front sights.

AR-15/M16 RK-M4 FOREND RAIL MOUNT RK-M42 FOREND RAIL MOUNT $39.99 Rugged polymer mount is the quickest way to get accessory rails up front without having to get a new handguard or modify your rifle. Clamps securely over the factory plastic handguard to provide rail mounting space for lights, lasers, IR illuminators, vertical grips, bipods, and other tactical accessories. Provides one 3¾" bottom rail along the centerline of the barrel and two 1¾" long top rails offset at a 45° angle to allow installation of a weaponlight or laser sight without interference from front sight. Reversible design can be mounted upside down. Reinforced injection-molded polymer is strong, yet lightweight, with no sharp edges to snag on gear. SPECS: Injection-molded polymer, matte black. 3¾” (9.5cm) long x 3” (7.6cm) wide x 3½” (8.9cm) high. 3 oz. (86g) weight. Mounting hardware and installation instructions included.

Attwood 7/8” – 1-1/4” Rod Holder Rail Mount Adapter $12.99 Tough and reliable. For use with both Attwood Rod Holders and Attwood Pro Series Rod Holders (sold separately). Manufacturer model #: 5012-7. Attwood Pro Series Rod Holder sold separately and can be found through item search for item number 38-427-445-00 Attwood Rod Holder sold separately and can be found through item search for item number 38-427-446-00

PICATINNY BIPOD ADAPTER BROWNELLS PICATINNY BIPOD ADAPTER $42.95 Low-profile adapter clamps solidly to any Picatinny rail handguard to provide a secure mounting point for bipods that attach to sling swivel studs. Increases your accessory mounting options without making permanent alterations to gun. Stud and base are precision machined from a single billet of high-grade 6061 T6 aluminum for maximum strength to handle the rigors of tactical deployment. Two robust cross-bolts and oversized, slotted hex nuts of heat-treated 4140 carbon steel lock the full-contact clamping bar tightly to the rail, and ensure the mount won’t shift position even under heavy recoil. Also accepts a standard quick-release sling swivel, for rapid transition from bipod operation to s SPECS: Body – 6061 T6 aluminum, hardcoat anodized, matte black. Thumbscrews & Bolts – 4140 carbon steel, black oxide finish. 2.125” (5.4cm) long, 1” (2.5cm) wide. Mount extends .357” (9.5mm) below rail. 2.7 oz. (76g) weight.

J-POINT & OPTIMA MOUNTING ADAPTER JPA-WP RAIL ADAPTER FOR JPOINT SIGHT $59.95 Gives the J.P. J-Point, and the old, Tasco Optima and Fire Point sights, the lowest possible mount for fast eye alignment and sight pickup. No machining required (except on shotgun); fits the factory dovetail. Four locating studs lock sight to base. BM #1 fits slides cut for “melted-in” sight. LPA fits Para-Ordnance and others with LPA sight cut. S&W Revolver fits factory drilled and tapped guns. SPECS: Aluminum, black anodized, matte finish.

MINI-14~ SCOUT RAIL ARM-14 RUGER MINI-14 SCOUT RAIL MOUNT $93.99 Replaces the handguard with a Picatinny-style rail that securely clamps to the barrel. Iron sights remain usable; no modifications to rifle. SPECS: 6000 series, aluminum, black anodized. 9″ (22.7cm) long. 14.3 oz, (405 g). Accepts Weaver-style rings.

MINI-14~ SCOUT RAIL ARM-30 MINI-30 SCOUT RAIL MOUNT $93.99 Replaces the handguard with a Picatinny-style rail that securely clamps to the barrel. Iron sights remain usable; no modifications to rifle. SPECS: 6000 series, aluminum, black anodized. 9″ (22.7cm) long. 14.3 oz, (405 g). Accepts Weaver-style rings.

RECEIVER MOUNT PICATINNY RAIL ALUMINUM STD-PROFILE RAIL FOR MOSSBERG $39.99 One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on Mossberg shotguns. Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance. Four steel, 8-40 Allen head screws secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then mil-spec type III hardcoat anodized for added strength. Fits 1997 and later, Mossberg shotguns with factory drilled and tapped receivers or receivers custom drilled and tapped for 8-40 threads. Not recommended for mounting optics on guns with high-mounted telescoping stocks. SPECS: 6061 T6 Aluminum, mil-spec Type III hardcoat anodized finish, matte black. 5½” (22cm) long. 1.3 oz. (37g) weight. Includes mounting screws. Fits 1997 and later, Mossberg shotguns with factory drilled and tapped receivers.

BIPOD ADAPTER FA ENTERPRISES BIPOD ADAPTER $37.99 Swivel stud mounted to an aluminum block slides onto Picatinny and Weaver-style accessory rails. Lets you mount a sling or bipod where you want it; near the rifle midpoint, along either side of tube, or near the muzzle. Clamps down tightly with no external nuts to snag your fingers or catch on clothing. Great on AR-15’s and rifles with accessory rail handguards and float tubes. SPECS: 6061-T6 aluminum, Anodized, matte black. 2¾” (6.9cm) long.

TACTICAL RING RAIL TACTICAL RING RAIL $20 The A.R.M.S. #22 TRR Tactical Ring Rail allows the mounting of devices to the top of a scope ring. It offers an additional base to scoped rifles for the mounting of other equipment and accessories such as lights, lasers, or auxiliary sighting devices. This mount requires the use of the #22 Tactical Ring Cap and is compatible with #22M68 spacers for additional height when using optics with tall elevation adjustment knobs. Comes complete with two mounting screws. Specs: Ring Rail mounting base, Black finish, Mounting screws included.

WEAVER AR-15/M16 TRI RAIL (TR) MOUNT SYSTEM 48323 AR-15 TRI-RAIL MOUNT SYSTEM FT $39.49 Picatinny rail designs increase your scope and accessory mounting options without gunsmithing or permanent alterations. Tri Rail (TR) design if maximum rail space for lights, lasers and other tactical accessories is required. Made from tough, extruded aluminum; attaches securely with easy-to-turn, steel thumbscrews with threaded steel studs. Accepts both Picatinny or Weaver-style accessories and rings and includes mounting recesses and screws for STANAG rings. Sight tunnel in carry handle version allows unobstructed use of the adjustable A2 factory sights. Flat top version raises line of sight by .750″ (19mm) for improved eye relief and more comfortable cheek weld with conventional or electr SPECS: Aluminum, matte black, anodized finish. Carry Handle Mount – 5¼” (13.3cm) long, 1¾” (4.4cm) wide. 4.5 oz. (128g) weight. Flat Top Mount – 6” (15.2cm) long, 1¾” (4.4cm) wide. 6.5 oz. (182g) weight.

WEAVER AR-15/M16 TRI RAIL (TR) MOUNT SYSTEM 48322-AR-15 TRI RAIL MOUNT SYSTEM CH $39.49 Picatinny rail designs increase your scope and accessory mounting options without gunsmithing or permanent alterations. Tri Rail (TR) design if maximum rail space for lights, lasers and other tactical accessories is required. Made from tough, extruded aluminum; attaches securely with easy-to-turn, steel thumbscrews with threaded steel studs. Accepts both Picatinny or Weaver-style accessories and rings and includes mounting recesses and screws for STANAG rings. Sight tunnel in carry handle version allows unobstructed use of the adjustable A2 factory sights. Flat top version raises line of sight by .750″ (19mm) for improved eye relief and more comfortable cheek weld with conventional or electr SPECS: Aluminum, matte black, anodized finish. Carry Handle Mount – 5¼” (13.3cm) long, 1¾” (4.4cm) wide. 4.5 oz. (128g) weight. Flat Top Mount – 6” (15.2cm) long, 1¾” (4.4cm) wide. 6.5 oz. (182g) weight.

GRIP POD ADDITIONS LIGHT RAIL MOUNT DUAL DESERT TAN $31.99 The Light Rail Module is easy to install and adds a rail system to the Grip Pod System, allowing the user to have a tactical light or laser right at their fingertips. Simply add the single or dual rail module to the Grip Pod and attach any tactical accessory.

GRIP POD ADDITIONS LIGHT RAIL MOUNT SINGLE DESERT TAN $26.99 The Light Rail Module is easy to install and adds a rail system to the Grip Pod System, allowing the user to have a tactical light or laser right at their fingertips. Simply add the single or dual rail module to the Grip Pod and attach any tactical accessory.

SHOTGUN TRI-RAIL ACCESSORY MOUNT SHOTGUN TRI-RAIL MOUNT (MAG TUBE) $29.99 Rugged, machined aluminum rail mount clamps around 12 gauge shotgun magazine tube to provide rail space on three sides for secure mounting of tactical lights and laser aiming devices. Gets your light and/or laser where it belongs—up front—so it won’t be obstructed by your support hand or other gear. Gives your tactical or home-defense shotgun added versatility to maximize your readiness for meeting threats effectively in low-light conditions. Accepts both Picatinny and Weaver-style accessories. Requires less than 1½” of space ahead of forearm on 1″ O.D. factory magazine tube, or clamp onto aftermarket mag extension tube. Attaches with two steel machine screws; no permanent alterations requir SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 1.375” (cm) long. 1.2 oz. (g) weight.

AR-15/M16 RAIL MOUNT QD SLING SWIVEL RAIL MOUNT FRONT LOOP QD W/ SWIVEL $39.99 Uniquely designed, quick-detach swivel mount limits rotational movement to help achieve optimum weapon balance and control with popular tactical slings. Attach anywhere along railed forearms; robust, aluminum clamping block with hex head cross-bolt locks mount securely to any Picatinny or Weaver-style rail platform. Extra heavy-duty, steel, push-button swivel removes quickly, so operator can break-away from the sling in emergency situations. Can be mounted for right- or left-hand use and adapts to 2- and 3-point sling configurations. Swivel rotation is limited to approximately 45° to help stabilize the weapon and eliminate sling tangle. SPECS: 6061 T6 aluminum, Mil-Spec Type III, hardcoat anodized, black. 1¼ (3.2cm) long, 1” (2.5cm) wide, 5⁄8" (1.6cm) high, 1 oz. (28g) wt.

AR-15/M16 GRAPHITE RAIL SYSTEM GRAPHITE RAIL W/ BACKING PLATE &SCREWS $16.95 Heat-resistant, graphite rail aligns with vent holes on standard issue, round M16/AR-15 handguards and lets you mount picatinny rail accessories without the expense of new handguards. Aluminum backing plate mounts on inside of handguard and attaches to rail with two screws (included) and can be mounted to full stock AR-15/M16, CAR, and M4 handguards. Installs with no permanent modifications to the handguard. SPECS: Heat-resistant graphite, black. Aluminum backing plate. 2.16″ (5.5cm) long. Mounting screws included.

II Adapter II ADAPTER $49 The A.R.M.S. #06 II Adapter is a rail accessory that converts NATO STANAG mounts to A.R.M.S./ SWAN 1913 rails. This rail offers tow positions of fastening for additional eye relief considerations via two included securing screws. This allows the rail to extend to the rear or front. Spec: Length: Aprox. 6-inches, Hard-coat finish, Screws included

BERETTA 92/96 & 1911 AUTO LIGHT RAIL MOUNT BERETTA/1911 STEEL LIGHT RAIL MOUNT $50.99 Add-on light rail makes it cost-effective to convert any 1911 Auto-type pistol or early model Beretta 92/96 pistol without an integral frame rail to accept a wide assortment of popular weapon lights and lasers. Rail attaches permanently with the supplied screws and Acraglas Gel® to form a seamless mate with the dust cover. Aluminum model keeps aluminum-framed pistols lightweight and maneuverable. Steel version provides extra strength and added weight for improved balance and recoil control, plus it can be welded into place and finish-shaped for a “built-in” appearance on steel framed pistols. Installation requires permanent alteration of the frame and must be completed by a co SPECS: Aluminum or steel, matte black. 19⁄16″ (4cm) long, 13⁄16″ (2.1cm) wide, 3⁄8″ (9.5mm) high. Weight: Aluminum – .6 oz. (17g). Steel – 1.2 oz. (34g). Fits Beretta 92/96 and 1911 Auto-type pistols.Slot centers located .510″ from each end.

BERETTA 92/96 & 1911 AUTO LIGHT RAIL MOUNT BERETTA/1911 ALUM LIGHT RAIL MOUNT $50.99 Add-on light rail makes it cost-effective to convert any 1911 Auto-type pistol or early model Beretta 92/96 pistol without an integral frame rail to accept a wide assortment of popular weapon lights and lasers. Rail attaches permanently with the supplied screws and Acraglas Gel® to form a seamless mate with the dust cover. Aluminum model keeps aluminum-framed pistols lightweight and maneuverable. Steel version provides extra strength and added weight for improved balance and recoil control, plus it can be welded into place and finish-shaped for a “built-in” appearance on steel framed pistols. Installation requires permanent alteration of the frame and must be completed by a co SPECS: Aluminum or steel, matte black. 19⁄16″ (4cm) long, 13⁄16″ (2.1cm) wide, 3⁄8″ (9.5mm) high. Weight: Aluminum – .6 oz. (17g). Steel – 1.2 oz. (34g). Fits Beretta 92/96 and 1911 Auto-type pistols.Slot centers located .510″ from each end.

PICATINNY SIDE-MOUNT ADAPTER PICATINNY SIDE-MOUNT ADAPTER $25.35 Aluminum, space-saving, side-mount adapter fits on Picatinny rails to let you mount flashlights, laser-light systems, red-dot scopes, and more. Attachment leg doesn’t interfere with the mounting of your scope; no need to sacrifice optics for accessories. Will not fit Weaver bases. SPECS: Machined aluminum, powder-coated, black, matte finish. Approximately 1″ (2.54cm) long, 27/32″ (21.4mm) wide. Will not fit Weaver bases.

AK-47 THREE RAIL HANDGUARD AK-47 THREE RAIL HANDGUARD BLACK $44.89 Reinforced plastic composite unit mounts to your AK-47 with no gunsmithing and gives you three rails for mounting picatinny pattern accessories. Rails on each side of the handguard, plus an additional rail on the bottom, allow for multiple accessory configurations to fit your specific mission. SPECS: Reinforced plastic composite, matte black. Mount – 6.5″ (16.4cm) long, Side rails – 1.85″ (4.6cm) long, Bottom rail – 5″ (12.8cm) long.

AR-15/M16 MX-SERIES HANDGUARD MOUNT MX HANDGUARD MOUNT $14.99 Precision-machined for positive contact on the flat, tapered, cooling port channel of A2 and M4 handguards. Stout, single-slot, Picatinny rail accepts one ringmount for tactical accessories or a front sling adapter for carry rifles. Two, specially designed, hex nuts seat perfectly in the ventilation holes and prevent forward tilt of the mount. Draws down tightly without removal of the heat shields. SPECS: 6061 aluminum, hardcoat anodized, black. 1¾” (4.4cm) long, 13/16″ (2.1cm) wide, 3/8″ (9.5mm) high.

HANDGUN SCOPE MOUNT APM-1R GLOCK SCOPE MOUNT W/ACC. RAIL $78.99  Installs quickly to let you add scope capabilities to revolvers and semi-auto handguns. Issue sights remain fully functional. Revolver mounts clamp to top strap and right side of frame. Includes longer sideplate screws. Accepts Weaver-style rings. SPECS: Machined 6061 T6 aluminum, black anodized finish. 5″ long (12.7cm), 1″ wide (2.5cm), 4 oz. (113 g) wt. Loctite®, screws and wrench included. Glock w/Acc Rail fits 9mm/.40 models only. HK USP fits 9mm/.40 only.

VERTICAL GRIP ADAPTER VERT.GRIP ADP.W/RESTRICTED MOVEMENT $55.95 Full Movement (FM) – swivels for 45 degrees of side-to-side movement. Restricted Movement (RM) – no movement; keeps Versa Pod in line with weapon. SPECS: Mount – Steel, matte black. Grips – High-impact plastic, matte black. Attaches to Picatinny rail systems.

VERTICAL GRIP ADAPTER VERT.GRIP ADP.W/FULL MOVEMENT $55.95 Full Movement (FM) – swivels for 45 degrees of side-to-side movement. Restricted Movement (RM) – no movement; keeps Versa Pod in line with weapon. SPECS: Mount – Steel, matte black. Grips – High-impact plastic, matte black. Attaches to Picatinny rail systems.

UNI-MAX RAIL MOUNT LASER SIGHT LMS-UNI UNI-MAX RAIL MOUNT LASER $192.15 Compact, lightweight laser sight projects a bright, highly visible beam on the target for precise shot placement. Mounts in seconds on any pistol, rifle, or shotgun with 1¾” or more of Picatinny or Weaver-style rail space. Ambidextrous switch is comfortably positioned for quick engagement when pistol shooter’s index finger rests along the slide in the Universal Cover Mode. Beam may be set to constant output or rapidly pulsating mode for even greater visibility. Low-profile housing allows many guns fitted with the Uni-Max to be carried in standard holsters. Integral Picatinny rail on underside of housing allows mounting of tactical weapon light. Windage and elevation adjust easily with the in SPECS: Fiber reinforced nylon, black. 2¼” (5.7cm) long, 1” (2.5cm) wide, ¾” (1.9cm) high. Beam Diameter – 5/16” (1.6cm) at 7 yards, ¾” (1.9cm) at 25 yards. Uni-Max Red – 635 nm wavelength laser. .9 oz. (26g) weight. Includes (2) 357 batteries and (2) Allen wrenches. Uni-Green – 532

AR-15/M16/M4/CAR-15/AR-10 MODULAR FLATTOP RISER MOUNT SYSTEM BASE FOR AR-15 RAIL $40.99 Modular riser mount clamps to flat top Picatinny cut AR-15 receivers in seconds, so you can mount a scope at correct eye level for maximum accuracy. Two, oversized, easy-grip thumbscrews and full-contact clamping along entire length of base provide rock-solid attachment to receiver without permanent modification of gun. Choose the precise rail height and angle to suit your needs; riser is secured to base with three Allen head setscrews. This mount will not shoot loose no matter how many rounds you send downrange. Use angled riser mounts when you need to raise or lower point of impact more than scope’s internal elevation adjustment will allow. Entire unit—base, riser, and attached scope—can b SPECS: Precision machined 6061 T6 aluminum, hardcoat anodized matte black. 5½” (14cm) long. Base is 1″ (2.5cm) wide, .3″ (7.62mm) thick. MOA mounts are .649″ (16.5mm) thick at highest point. ¾” Mount – .700″ (1.8cm) high. 1″ Mount – 1″ high. 1¼” Mount – 1.25″ (3.2cm) high.

QUICK-RELEASE ACCESSORY MOUNT VERTICAL GRIP RAIL ASSEMBLY W/ BASE $99.95 Convenient, quick-detach mount clamps solidly to almost any Picatinny or Weaver-style rail for mounting weaponlights, vertical grips, lasers, optics, and other accessories that need to be removed and reinstalled quickly. Increases the flexibility of your weapon and allows quick changes of accessory configuration to meet individual mission requirements. Patented lever-lock system will not work loose under recoil; the more force acting on the lever, the tighter it locks, yet when you depress the release tab, the lever swings open easily. Adjust gripping force with a flat head screwdriver or coin for an ultra-secure fit even on non-mil-spec, over- or under-sized rails. Lever may be configured t SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 2¼” (5.7cm) long. Provides .615” (1.6cm) standoff from weapon rail.

PISTOL LASER SIGHT SYSTEMS QR UNIVERSAL RAIL MOUNT LASER SYSTEM $99.95 Minimal-profile laser sighting systems use an integral mount that clamps securely to any standard pistol frame accessory rail system. Despite their tiny size, these lasers project a powerful Class IIIa, 5mW, 650nm red beam up to 1,500 feet at night, with a 1½ hour continuous laser run time. Precision-ground glass lens minimizes scatter to help maintain a crisp, focused beam even when illuminating targets at maximum range. Quick-detach mounting system clamps to frame rail with a captive, full-length locking bar and cross-bolt. Cross-bolt’s grooved head allows tightening with finger pressure only; for additional security, apply more tightening force easily with a dime or penny. SPECS: 6061 T6 aluminum, anodized, matte black finish. Universal – 1-5⁄8" (4.1cm) long, 1” (2.5cm) wide, extends approximately ¾” (1.9cm) below rail. 1.1 oz. (31.2g) with two G-13 batteries (included) installed. Subcompact –

AR-15/M16 ONE O’CLOCK OFFSET RAIL ONE O’CLOCK OFFSET RAIL $44.99 Lightweight, low-profile, rail clamps to handguard side rail to allow easy off-axis mounting of red dot sights in the 1:00 or 11:00 position. Lets operator transition almost instantly from long-range primary optic to non-magnified CQB sight without breaking cheekweld. Viewing tunnel through the mount helps minimize obstruction of operator’s view of area around the target. Plenty of other uses, too; clamps to any MIL-STD 1913 Picatinny rail. Install on underside of handguard to position a laser or weaponlight close to vertical forend grip for easy operation of controls with support hand. Precision machined from 6061-T6 aluminum billet, then mil-spec Type III hardcoat anodized for added streng SPECS: 6061-T6 aluminum, hardcoat anodized, matte black. 1.2 oz. (34g) weight.

AR-15/M16 ACCESSORY RAILS LIGHT RAIL MOUNT SINGLE DESERT TAN $26.99 Bolt-on, Picatinny-type rail increases the versatility and effectiveness of your Grip Pod by adding mounting space for tactical accessories directly below the handguard. Puts controls for lights and lasers in easy reach of your support hand for exceptionally fast activation in any situation. Made of the same tough, reinforced, high-density polymer as the Grip Pod itself, so it stands up to the rigors of tactical operations. No drilling or other permanent alterations required to install; simply remove a pin and plug from the front of the Grip Pod, insert the rail unit and lock it down by tightening the steel hex-head bolt with the included hex-wrench. Available in single, right-hand rail < SPECS: Reinforced, injection-molded polymer, Black or Desert Tan. GPRS1 &ndash; 2&frac12;&quot; (5.4cm) length rail on right side of weapon. GPRS2 &ndash; 2&frac12;&quot; of rail space on each side.

AR-15/M16 ACCESSORY RAILS LIGHT RAIL MOUNT DUAL DESERT TAN $31.99 Bolt-on, Picatinny-type rail increases the versatility and effectiveness of your Grip Pod by adding mounting space for tactical accessories directly below the handguard. Puts controls for lights and lasers in easy reach of your support hand for exceptionally fast activation in any situation. Made of the same tough, reinforced, high-density polymer as the Grip Pod itself, so it stands up to the rigors of tactical operations. No drilling or other permanent alterations required to install; simply remove a pin and plug from the front of the Grip Pod, insert the rail unit and lock it down by tightening the steel hex-head bolt with the included hex-wrench. Available in single, right-hand rail < SPECS: Reinforced, injection-molded polymer, Black or Desert Tan. GPRS1 &ndash; 2&frac12;&quot; (5.4cm) length rail on right side of weapon. GPRS2 &ndash; 2&frac12;&quot; of rail space on each side.

AR-15/M16 TRI-RAIL ACCESSORY MOUNT WITH SLING SWIVEL TRI-RAIL ACCESSORY MOUNT W/SLING SWIVE $69.95 Add three, forward-mounted accessory rails and a multi-position, quick-detach sling swivel to your AR-15/M16 without permanent alterations to your rifle. Clamps securely around existing front sight housings with or without a bayonet lug. Push-button sling swivel can be repositioned quickly between six mounting holes, two per rail, for the ultimate in versatility. True, Picatinny cut allows mounting optics, lasers, lights, night vision gear, and a wide variety of other tactical accessories. Precision-machined from rugged, billet aluminum and hardcoat anodized for superior strength and wear resistance. SPECS: Aluminum, hardcoat anodized, matte black finish. 1-11⁄16″ (4.5cm) long, 2″ (5.2cm) wide, 2″ (5.2cm) high. Hardened-steel, Allen-head set screws included.

REMINGTON 870 SINGLE RAIL FOREND REM 870 TACTICAL FLASHLIGHT MOUNT $92 Heavy-duty, weather-resistant, polymer forearm replaces the factory forend, to add a MIL-STD 1913 Picatinny rail at the 3-o’clock position for mounting a variety of tactical accessories. Compact, aluminum rail is perfect for a small light or laser, and easily removes with an Allen wrench if not needed. Vertically grooved sides provide a non-slip surface for your hand when shooting and cycling rounds. Includes steel forend nut wrench for easy installation. Available for Remington 870, 12 gauge only. SPECS: Forend – High-density polymer composite, black. 6¾” (17cm) long x 1¾” (4.4cm) wide. Rail – Aluminum, mil-spec manganese phosphate finish, matte black. 6.7 oz. (198g) weight. Includes forend nut wrench and instructions. Fits Rem. 870, 12 gauge only.

Bert?s Custom Tackle Rail Mount Reel $79.99 For running and retrieving planer boards Adjustable tension knob Clamps tightly to any standard rail Pre-spooled with 150′ heavy-duty planer board line with snap This low-profile Rail Mount Planer Board Reel from Bert?s Custom Tackle is perfect for running and retrieving your planer board. The manual Rail Mount Planer Board Reel is made durable with adjustable tension knob and is designed to clamp tightly to any standard rail. Pre-spooled with 150 feet of heavy-duty, fluorescent green planer board line with snap.

PICATINNY RAIL VERSA POD 180-MZ-251 LW MIL-1913 RAIL BIPOD MIL $249.95 Two, distinctly different bipods attach quickly to any Mil. Std. 1913 Picatinny rail for faster deployment when changing from field to bench shooting. Lightweight Picatinny (LW) features a convenient flip lever that locks securely to the rail, but can be flipped back for complete bipod removal in just seconds. Pan and tilt adjustments are controlled by tightening the dual locknuts with a wrench. Heavy Duty Picatinny (HD) attaches to Picatinny rails with a dual-screw, locking dovetail mount. Pan and tilt feature includes an instantly-adjustable, friction-locking thumbscrew that adjusts to expand or limit movement. Both models feature spring-loaded legs with non-skid rubber feet SPECS: Steel, matte black. Lightweight – 17 oz. (.48kg) wt. Heavy Duty – 1½ lb. (.68kg) wt.

PICATINNY RAIL VERSA POD 150-925 LW PICATINNY RAIL BIPOD, 7-9, $199.95 Two, distinctly different bipods attach quickly to any Mil. Std. 1913 Picatinny rail for faster deployment when changing from field to bench shooting. Lightweight Picatinny (LW) features a convenient flip lever that locks securely to the rail, but can be flipped back for complete bipod removal in just seconds. Pan and tilt adjustments are controlled by tightening the dual locknuts with a wrench. Heavy Duty Picatinny (HD) attaches to Picatinny rails with a dual-screw, locking dovetail mount. Pan and tilt feature includes an instantly-adjustable, friction-locking thumbscrew that adjusts to expand or limit movement. Both models feature spring-loaded legs with non-skid rubber feet SPECS: Steel, matte black. Lightweight – 17 oz. (.48kg) wt. Heavy Duty – 1½ lb. (.68kg) wt.

AR-15/M16 QUAD-RAIL HANDGUARD AR15/M4 ALUMINUM QUAD RAIL $63.75 Four-rail Picatinny handguard expands the versatility of any tactical AR-15/M16/M4 carbine by allowing you to mount a wide array of lights, lasers, flip-up sights, vertical grips, and bipods. True, drop-in replacement for factory plastic handguard clamps securely to the barrel nut and front handguard cap with four steel cap screws that let you easily adjust the tension to prevent unwanted movement. Requires no permanent alterations to rifle; remove Quad Rail at any time and reinstall factory guard. Provides a full load of features that tactical shooters want, including white numeric index markings in slots to ensure repeatability of accessory positions, and large cooling vents to help pre SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 6¼” (15.9cm) overall length. Fits AR-15/M16/M4 with carbine-length gas system and retention system for USGI plastic handguard.

Streamlight Remington 870 Adapter Rail Mount Md: 69906. $15.17 Streamlight Remington 870 Adapter Rail Mount, Attaches Streamlight tactical lights to the Remington 870., Mfg No: 69906, Manufacturer: Streamlight…

INFORCE Rail Mount $64.35 …

ACI Din Rail Mount Power Supply Power Supplies Type: Din Rail Mounting Adapter…

HP J1480A 2-Post Slide Mount Adapter Rail Kit for Lp1000R Hewlett Packard’s 30 years of racked systems design experience results in an approach that allows more flexibility to configure a rack-mounted solution to meet your needs. HP has provided their rack systems with enough flexibility, options, and accessories to enable you to tailor a solution for your servers – saving you time and space….

Lobstermount Rail Mount Requires Cradle Or Adapter $61.99 Lobstermount Rail Mount Requires Cradle Or AdapterPalmetto West Trading part number M3-211…

Is there such thing as a camera adapter that will mount on an airsoft gun with weaver rails?

I’m looking for basically the top of a tripod that has Weaver Rail mounting capabilities on an airsoft gun.

there is one made for having it on your gun and it is made by RAP4 and it can either be on a rail or on your barrel. They cost a lot for the camera but if that what your looking for the one by RAP4 is the best.

It is about $200

here is a link from a guy selling it on ebay.

http://cgi.ebay.com/RAP4-Land-Warrior-Wireless-Camera-PAINTBALL-GUN-MOUNT_W0QQitemZ270441229451QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ef78dac8b

Hidden Hitch Install 2002 Honda Civic Bolt in Frame Rail

Buffalo Industries Contour Sponge $7.99 Make quick work of your marine, automobile and household cleaning jobs with a Contour Sponge from Buffalo Industries. The versatile Contour Sponge is made rugged from 100% cellulose with a durable skin, and its easy-to-grip contour shape makes cleaning those hard-to-reach areas on your boat and around the house a breeze. Size: 7-3/4” x 3-3/4” x 2-1/8”. One pack. Imported.

MIDWEST INDUSTRIES AR-15 MCTAR-30HD SLING ADAPTER MCTAR-30HD SLING ADAPTER $59.99 No gunsmithing required, extra heavy-duty ambidextrous sling swivel mount simply clamps onto the buffer tube. Includes 1¼”, mil-spec., push-button, quick-detach sling swivel that can be mounted on either side or the center of the adapter body. Fits adjustable M4-type buttstocks Hard coat anodized, 6061 aluminum body with a matte black finish is built to take extreme duty use without failure. Won’t interfere with the operation of stock. Makes an excellent choice for adding an easy quick-release feature to any single-point, two-point, or three-point tactical sling. Made in the USA. SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.

MIDWEST INDUSTRIES AR-15 END PLATE SLING ADAPTER END PLATE SLING ADAPTOR QUICK-DETACH $42.99 Ambidextrous, quick-detach sling swivel can be mounted on either side of the mounting plate on adjustable M4-type buttstocks so you can position your sling for optimum comfort and versatility. Hard coat anodized, 6061 aluminum body with a matte black finish holds up to the toughest use and won’t crack or break over years of shooting. Won’t interfere with the operation of stock and works well with single-point, two-point, or three-point tactical slings. SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.

SINGLE ACTION ACTION WRENCHES COLT SINGLE ACTION WRENCH COMPLETE $139.99 Aluminum heads completely enclose those fragile, single action frames to help eliminate expensive frame damage. SPECS: Base/Handle Unit – Steel, blue. 12¾” (31cm) long, 1″ (2.5cm) diameter handle. Interchangeable Heads – Aluminum, ¾” (19mm) square, 5-1⁄8″ (14cm) long. Complete Wrench – Includes Base/Handle and heads for one gun model, bolts and instructions. Ruger fits Blackhawk, Super Blackhawk and

SINGLE ACTION ACTION WRENCHES RUGER SINGLE ACTION WRENCH COMPLETE $142.99 Aluminum heads completely enclose those fragile, single action frames to help eliminate expensive frame damage. SPECS: Base/Handle Unit – Steel, blue. 12¾” (31cm) long, 1″ (2.5cm) diameter handle. Interchangeable Heads – Aluminum, ¾” (19mm) square, 5-1⁄8″ (14cm) long. Complete Wrench – Includes Base/Handle and heads for one gun model, bolts and instructions. Ruger fits Blackhawk, Super Blackhawk and

SINGLE ACTION ACTION WRENCHES COLT SINGLE ACTION WRENCH HEAD ONLY $105.45 Aluminum heads completely enclose those fragile, single action frames to help eliminate expensive frame damage. SPECS: Base/Handle Unit – Steel, blue. 12¾” (31cm) long, 1″ (2.5cm) diameter handle. Interchangeable Heads – Aluminum, ¾” (19mm) square, 5-1⁄8″ (14cm) long. Complete Wrench – Includes Base/Handle and heads for one gun model, bolts and instructions. Ruger fits Blackhawk, Super Blackhawk and

SINGLE ACTION ACTION WRENCHES RUGER SINGLE ACTION WRENCH HEAD ONLY $105.45 Aluminum heads completely enclose those fragile, single action frames to help eliminate expensive frame damage. SPECS: Base/Handle Unit – Steel, blue. 12¾” (31cm) long, 1″ (2.5cm) diameter handle. Interchangeable Heads – Aluminum, ¾” (19mm) square, 5-1⁄8″ (14cm) long. Complete Wrench – Includes Base/Handle and heads for one gun model, bolts and instructions. Ruger fits Blackhawk, Super Blackhawk and

MAGCINCH M14/M1A MAG CINCH, SINGLE $19.95 Clamps a second, hi-cap mag right to the one in the gun; your extra ammo is instantly available for super fast reloads. Stops fumbling when seconds count, holds magazines rock solid, without scratching or damage. SPECS: Black, fiberglass-filled nylon. 9/40/45 fits pistol caliber carbines. HK-91 also fits AR-10. Dbl indicates double-strap unit. Sgl indicates single-strap unit.

AR-15 ALUMINUM SINGLE SHOT FOLLOWER AR15 SINGLE SHOT ALUMINUM FOLLOWER $17.99 Easy to install, one-piece insert machined from solid aluminum bar stock rests on top of factory magazine follower to allow single shot loading of long cartridges with heavy varmint bullets. Prevents bullet or case damage caused by normal feeding from magazine. Perfect for precision target competition or varmint hunting. Fits Brownells 20- and 30-round magazines and similar USGI-type mags. No need to disassemble magazine to install because follower slides in from the top. Locks bolt open after the shot. Clear anodized to resist wear; silver color contrasts with plastic factory follower to give you instant visual recognition that the insert is installed. SPECS: Aluminum, anodized, natural silver finish. Fits USGI-style metal magazines.

WINCHESTER 52/69/75 SINGLE-SHOT MAGAZINE ADAPTER WIN 52/69/75 SINGLE-SHOT MAG ADAPTER $39.4 Single-shot magazine adapter includes a steel, loading tray that lets you drop rounds in without having to contend with the spring pressure of a multi-round magazine. Lessens the chance of fumbling expensive, match-grade ammo during competitions that require you to load your ammo one round at a time. SPECS: Steel tray, black, zinc-plated finish. Aluminum base, black anodized.

SINGLE POINT ADJUSTING BUTTPLATE THIN SINGLE POINT ADJ. BUTTPLATE $37.5 One screw lets you set butt pad vertical and horizontal position, plus rotation angle. Adds 1⁄4″ to length of pull. SPECS: Aluminum, silver finish. 6″ (15.4cm) long, 2″ (5cm) wide. Adjusts 2″ vertical, ¼” lateral, 360° rotation. 3″ (7.8cm) c-to-c hole spacing. Includes instructions.

BALDOR BUFFERS 114 BUFFER, SINGLE PHASE $286 Heavy-duty, U.S. Made, construction stands up to the toughest shop use. We recommend the one-horsepower 1800 rpm motor for the gun refinisher. Add the heavy Buffer Pedestal shown below for the ideal setup. All single phase Baldor Buffers come internally wired for 115 Volt, 60 cycle.- Easily changed over to 230 Volt (except ¼ hp.). NOTE: Cord and Plug NOT included. SPECS: METRIC: ½” (12.7mm), ¾” (10.9mm), 7⁄8″ (22.2mm), 2-5⁄8″ (6.7cm), 6-3⁄8″ (16cm), 7-3⁄16″ (18cm), 16-1⁄8″(41cm), 27″ (68.6cm), 30″ (76cm).

BALDOR BUFFERS 332 BUFFER, SINGLE PHASE $609.99 Heavy-duty, U.S. Made, construction stands up to the toughest shop use. We recommend the one-horsepower 1800 rpm motor for the gun refinisher. Add the heavy Buffer Pedestal shown below for the ideal setup. All single phase Baldor Buffers come internally wired for 115 Volt, 60 cycle.- Easily changed over to 230 Volt (except ¼ hp.). NOTE: Cord and Plug NOT included. SPECS: METRIC: ½” (12.7mm), ¾” (10.9mm), 7⁄8″ (22.2mm), 2-5⁄8″ (6.7cm), 6-3⁄8″ (16cm), 7-3⁄16″ (18cm), 16-1⁄8″(41cm), 27″ (68.6cm), 30″ (76cm).

BALDOR BUFFERS 407 BUFFER, SINGLE PHASE $809.99 Heavy-duty, U.S. Made, construction stands up to the toughest shop use. We recommend the one-horsepower 1800 rpm motor for the gun refinisher. Add the heavy Buffer Pedestal shown below for the ideal setup. All single phase Baldor Buffers come internally wired for 115 Volt, 60 cycle.- Easily changed over to 230 Volt (except ¼ hp.). NOTE: Cord and Plug NOT included. SPECS: METRIC: ½” (12.7mm), ¾” (10.9mm), 7⁄8″ (22.2mm), 2-5⁄8″ (6.7cm), 6-3⁄8″ (16cm), 7-3⁄16″ (18cm), 16-1⁄8″(41cm), 27″ (68.6cm), 30″ (76cm).

SINGLE-SET TRIGGER RUGER #1/#3 SINGLE SET TRIGGER $269.99 Super-light “set” trigger and standard hunting trigger, all-in-one. Press forward to quickly convert the standard hunting weight pull into a light, match-grade pull. Solid, all-steel construction; screw adjustable for weight of pull. Installed on a Military 98, “set” pull weight was 6 oz., unset was 3 lb. M98 – Requires widening of the trigger slot. M98 W/Safety – Has large, easy-to-reach, sear block; thumb safety on right side of trigger housing. Has polished steel or gold plated trigger. Requires stock and triggerguard modifications plus milling slot in receiver on M98 – only minor fitting for Mk X. Ruger #1 and #3 – Both use factory safety. Range o SPECS: Steel, polished and blued, or stainless steel (Ruger #1/#3). M98 also available with a gold plated trigger. Instructions.

SINGLE-SET TRIGGER KEPPLINGER M98 SINGLE SET TRIGGER $209.16 Super-light “set” trigger and standard hunting trigger, all-in-one. Press forward to quickly convert the standard hunting weight pull into a light, match-grade pull. Solid, all-steel construction; screw adjustable for weight of pull. Installed on a Military 98, “set” pull weight was 6 oz., unset was 3 lb. M98 – Requires widening of the trigger slot. M98 W/Safety – Has large, easy-to-reach, sear block; thumb safety on right side of trigger housing. Has polished steel or gold plated trigger. Requires stock and triggerguard modifications plus milling slot in receiver on M98 – only minor fitting for Mk X. Ruger #1 and #3 – Both use factory safety. Range o SPECS: Steel, polished and blued, or stainless steel (Ruger #1/#3). M98 also available with a gold plated trigger. Instructions.

SINGLE-SET TRIGGER M-98 SINGLE SET TRIGGER WITH SAFETY $246.24 Super-light “set” trigger and standard hunting trigger, all-in-one. Press forward to quickly convert the standard hunting weight pull into a light, match-grade pull. Solid, all-steel construction; screw adjustable for weight of pull. Installed on a Military 98, “set” pull weight was 6 oz., unset was 3 lb. M98 – Requires widening of the trigger slot. M98 W/Safety – Has large, easy-to-reach, sear block; thumb safety on right side of trigger housing. Has polished steel or gold plated trigger. Requires stock and triggerguard modifications plus milling slot in receiver on M98 – only minor fitting for Mk X. Ruger #1 and #3 – Both use factory safety. Range o SPECS: Steel, polished and blued, or stainless steel (Ruger #1/#3). M98 also available with a gold plated trigger. Instructions.

SINGLE-SET TRIGGER REM. 700 SINGLE SET TRIGGER $166.99 Super-light “set” trigger and standard hunting trigger, all-in-one. Press forward to quickly convert the standard hunting weight pull into a light, match-grade pull. Solid, all-steel construction; screw adjustable for weight of pull. Installed on a Military 98, “set” pull weight was 6 oz., unset was 3 lb. M98 – Requires widening of the trigger slot. M98 W/Safety – Has large, easy-to-reach, sear block; thumb safety on right side of trigger housing. Has polished steel or gold plated trigger. Requires stock and triggerguard modifications plus milling slot in receiver on M98 – only minor fitting for Mk X. Ruger #1 and #3 – Both use factory safety. Range o SPECS: Steel, polished and blued, or stainless steel (Ruger #1/#3). M98 also available with a gold plated trigger. Instructions.

SINGLE-SET TRIGGER WINCHESTER MODEL 70 SINGLE SET TRIGGER $295.14 Super-light “set” trigger and standard hunting trigger, all-in-one. Press forward to quickly convert the standard hunting weight pull into a light, match-grade pull. Solid, all-steel construction; screw adjustable for weight of pull. Installed on a Military 98, “set” pull weight was 6 oz., unset was 3 lb. M98 – Requires widening of the trigger slot. M98 W/Safety – Has large, easy-to-reach, sear block; thumb safety on right side of trigger housing. Has polished steel or gold plated trigger. Requires stock and triggerguard modifications plus milling slot in receiver on M98 – only minor fitting for Mk X. Ruger #1 and #3 – Both use factory safety. Range o SPECS: Steel, polished and blued, or stainless steel (Ruger #1/#3). M98 also available with a gold plated trigger. Instructions.

ACE MAG POUCH ACE SINGLE STACK BLACK MAGAZINE HOLDER $40 Hand fitted from the finest quality cowhide to precisely match the contours of the firearm for a snug fit and secure retention. Nylon thread stitching with double-stitched stress points and back-tacked ends for years of service. Formed sight channel ensures the front sight never snags or pulls leather. Excellent attention to detail and design gives comfortable, all-day carry. Holds a single magazine. Two tension adjustment screws. Attaches with single, one-way snap. SPECS: Cowhide leather, brass rivets. Black. Right-hand. Single-Stack – 9mm or .45 ACP. Double- Stack – 9mm or .40 S&W, also fits Glock 36. 

AR-15/M16 SINGLE-POINT SLING SINGLE PT AMBI TACTICAL ASP-V SLING BL $27.5 Efficient, easy-to-use nylon web sling features a high strength, polycarbonate quick-release buckle that attaches to most weapon platforms and connects directly to your sling. Universal buckle design accepts all current weapon attachment stubs allowing use of a single sling with multiple weapons. Features rip-cord pull adjustment for instant height adjustment without taking your eyes off the target. ASP-V is an adjustable rig mount sling that attaches directly to your shoulder strap and LBV/Plate carrier or Pals/Molle webbing using the D-ring. Compact ambidextrous design allows either side weapon shouldering without tangles or interference. Contains one rig mounted quick-release adapt SPECS: Nylon webbing, black. Polycarbonate buckles, black. ASP-V – 21” (2.5cm) long x 1” (1.5cm) wide, 4” (2.5cm) long stub. ASP – 34½” (2.5cm) long x 1” wide, 4” stub.

AR-15/M16 SINGLE-POINT SLING SINGLE PT AMBI TACTICAL ASP SLING-BLK $36.5 Efficient, easy-to-use nylon web sling features a high strength, polycarbonate quick-release buckle that attaches to most weapon platforms and connects directly to your sling. Universal buckle design accepts all current weapon attachment stubs allowing use of a single sling with multiple weapons. Features rip-cord pull adjustment for instant height adjustment without taking your eyes off the target. ASP-V is an adjustable rig mount sling that attaches directly to your shoulder strap and LBV/Plate carrier or Pals/Molle webbing using the D-ring. Compact ambidextrous design allows either side weapon shouldering without tangles or interference. Contains one rig mounted quick-release adapt SPECS: Nylon webbing, black. Polycarbonate buckles, black. ASP-V – 21” (2.5cm) long x 1” (1.5cm) wide, 4” (2.5cm) long stub. ASP – 34½” (2.5cm) long x 1” wide, 4” stub.

THROW LEVER OPTIC MOUNTS #19S ACOG SINGLE LEVER MOUNT $125.99 Compact, quick-detach mounts clamp directly to AR-15/M16/M4 flattop receiver rail for solid, ultra-secure attachment of optics and holographic sights. The strong, yet lightweight aluminum base is secured to the rail by steel throw levers and locking feet, while a recoil lug locks into one rail slot to prevent unwanted sight movement under recoil. Quick-release levers close securely against the side of the mount to prevent snagging on other objects, yet release easily when you want to remove the sight and mount as one unit without loss of zero. Adapter-mount lets you easily install a Trijicon® ACOG scope designed for carry-handle rifles on a flattop. Available in Dual Lever and Single Lever SPECS: Aluminum rail, hardcoat anodized, matte black; steel levers, oxide finish, matte black. Dual Lever – 5-3⁄8″ (13.7 cm) long. 3.4 oz. (95 g) wt. Single Lever – 3-11⁄16″ (9.4cm). 2.5 oz. (72 g) wt.

FIBER OPTIC SHOTGUN FRONT SIGHTS SINGLE SHOTGUN BEAD GUNSMITH KIT $69.95 Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.

FIBER OPTIC SHOTGUN FRONT SIGHTS SINGLE SHOTGUN BEAD, GREEN $8.95 Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.

FIBER OPTIC SHOTGUN FRONT SIGHTS SINGLE SHOTGUN BEAD GUNSMITH PACK $69.95 Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.

FIBER OPTIC SHOTGUN FRONT SIGHTS SINGLE SHOTGUN BEAD, RED $8.95 Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.

FIBER OPTIC SHOTGUN FRONT SIGHTS SINGLE TRI-LINK $31.25 Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.

FIBER OPTIC SHOTGUN FRONT SIGHTS SINGLE SHOTGUN BEAD, AMBER $8.95 Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.

COLT SINGLE ACTION SCREWDRIVER BITS ONLY FOR COLT SAA SCREWDRIVER SET $9.99 On the bench or in the field, you’ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun’s screws to the correct Magna-Tip ® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Five bits to fit all the screws on Colt Single Actions and popular clones. SPECS: 8″ (20.3cm) long overall. 1¼” (3.2cm) diameter grip.

COLT SINGLE ACTION SCREWDRIVER BROWNELLS COLT SAA SCREWDRIVER SET $21.99 On the bench or in the field, you’ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun’s screws to the correct Magna-Tip ® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Five bits to fit all the screws on Colt Single Actions and popular clones. SPECS: 8″ (20.3cm) long overall. 1¼” (3.2cm) diameter grip.

CLEANING ROD CASE EJS SINGLE CLEANING ROD CASE $14.99 Sturdy, steel rod case prevents cleaning rods from getting bent or dirty; protects coated rods from scratches when traveling to the range, distant matches or hunting camp. Thick-walled, conduit tubing is powder coated for attractive looks and added protection. Single Case has Delrin¨ rod holder on one end, sealed on the opposite end. Double Case has a rod holder on each end. Fits Dewey, Bore-Tech and similar rods. SPECS: Steel, emt conduit, black, powder coat finish. Delrin rod holders, black. 45″ (1.2m) long. Accepts rods to 44″ (1.2m).

OLD ENGLISH STOCK FINISHING KIT AFRICAN EXPRESS SINGLE GUN KIT $41.95 Kit includes everything you need to finish an exhibition-grade stock in as little as three weeks. Specially formulated Old English Stock Finishing Oil lays the foundation for a truly beautiful finish. Grain & Pore Filler contains natural oils and resins to fill imperfections; Polishing Compound is a soft paste of waxes and mild abrasives to remove excess oil buildup between applications. Use the Antique Conditioning Wax with 0000 steel wool to cut the sheen for a satin look. Cleaning & Maintenance Oil combines oil and wax to keep the final wood finish free of blemishes. Depending on wood density, Single Gun Kit finishes one to two rifle stocks, Shop Kit completes three to four rifle stocks. SPECS: Single Gun Kit – Includes 3 oz. (90 ml) Stock Finishing Oil and 1.5 oz. (45 ml) each of Grain & Pore Filler, Polishing Compound, Cleaning & Maintenance Oil, and Antique Conditioning Wax. Shop Kit – Includes 9.5 oz. (280 ml) Stock Finishing Oil and 4.7 oz. (140 ml) each of Gra

MAGPUL INDUSTRIES MAGPUL 7.62 MAGPUL, 3 PAK $9.95 Thermoplastic loop installed on the base of a rifle or subgun magazine to provide an easy-to-grasp handle for unsurpassed speed and controllability during high stress, tactical magazine changes. Recessed, rough texture provides positive gripping surface under slippery or wet conditions. Finger loop acts as shock absorber to protect magazine from damage when dropped from rifle. Silences magazines stored next to each other in pouch. SPECS: Industrial thermoplastic, black. Impervious to most chemical compounds. Pak of 3. 5.56 NATO fits 20- and 30-round AR-15/M16. 7.62 fits M14, FAL, HK91 and SR25. 9mm Subgun fits HK MP5, Colt SMG and Uzi plus, .40 S&W and .45 cal subgun weapon systems.

MAGAZINE CATCH, SINGLE STACK, BLUE 0050300 MAGAZINE CATCH, SINGLE, BLUE $13.46 MAGAZINE CATCH, SINGLE STACK, BLUE

TRIGGER, SINGLE STAGE, M90, M75 S584S210 TRIGGER, SINGLE STAGE, M90,M7 $51.4 TRIGGER, SINGLE STAGE, M90, M75

AR-15 MCFARLAND? BOLT GAS RING MCFARLAND ONE PIECE BOLT GAS RING $3.99 Single spiral of spring steel loops around the bolt three times and leaves no path for gas leakage. Replaces conventional three-piece “piston ring”-style sets that can accidentally line up, causing a major leak from the gas expansion chamber in the carrier. SPECS: Polished spring steel.

Tackle Industries Super D Swimbaits – Magnum or Regular $13.49 The durable, soft plastic Super D Swimbaits have all the features to make them one of the top producing musky and pike lures in your arsenal. An internal harness and a jighead give the Super D Swimbaits a super durable and tough backbone, while its detailed soft plastic body with 3D eyes, lateral fins, gill plates and curly tail seductively swims through the water at a 45 degree angle on the fall and horizontally on the retrieve. The internal harness and four lateral fins give the Super D Swimbaits the balance and stability needed to rock back and forth on the retrieve which drives musky, pike and other gamefish to strike. The Super D Swimbaits are effective at any speed, can be twitched or jerked over weeds, on weed edges and on or around structure. Outfitted with triple split rings and heavy-duty 3X brass hooks. Magnum Super D Swimbaits measure 18” with tail out and weigh 8 oz. Regular Super D Swimbaits measure 14” with tail out and weigh 5 oz. Proven musky and pike actions Internal ”Body Lock” Harness creates ultra-tough backbone Detailed finishes with 3 D eyes, lateral fins, gill plates, curly tail and internal rattles Four lateral fins provide balance and stability Effective at any retrieve speed Outfitted with triple split rings and heavy-duty 3X brass hooks

Preferred Industries One Toggle Designer GFCI Plate, 10-Pack …

Preferred Industries WH3102-IVY One Toggle One Duplex Receptacle Plate, 10-Pack, Ivory $10.70 …

Fame (with Bonus Remixes EP) Special edition features bonus 4-track remixes EP! Original soundtrack to the 2009 remake of the original Fame motion picture, essentially a rebirth of this very popular franchise. Fame builds on the acclaimed music, dance and drive to shine, while finding new talent and building a new generation. The film was directed by Kevin Tancharoen, whose fast rise in the world of choreography has made him …

Trees/One Big Repeat $1.51 Two-track single, limited to1000. For fans of New York Dolls, Buzzcocks, The Libertines, Supergrass. Louie are a teenage six-piece from Essex with a strong live following. Captains. 2005….

The Ugly Ones [7 Vinyl Single] $4.99 1.The Ugly Ones, 2.Yeah Yeah…

Why christian ladies work in p0rn industry?

are they free? is this the freedom given by Jesus?
please don’t tell that christian are not responsible for your law which legalize p0rn0graphy
I have never seen one single christian pastor or priest who demonstrate against p0rn0graphy
What a dirty religion wow

It’s actually pornography. Using zeros in a word makes you look neurotic.

Dr. Paris: “Single Payer is…Medicare Expanded!”

1911 AUTO ONE GUN PIN KIT 1911 AUTO ONE GUN PIN KIT $16 The little pieces to build one 1911 Auto. Kit contains one of each of the pins listed on this page. SPECS: Steel, blue.

FRICTION DEFENSE~ GUN OIL 4 OZ. FRICTION DEFENSE GUN OIL $9.99 This superb, synthetic oil works on all firearms: full-auto, semi-auto, single-shot, pistols, rifles, and shotguns. It contains not one, but two of the finest lubricants available – Teflon and Moly (molybdenum disulfide) – and lubricates effectively from -75° F to +425° F. Unique heat transfer properties actually pull heat away from friction points, and extreme pressure additives keep Friction Defense on the parts, even in the hardest cycling semi-auto pistols and rifles, including full-auto military weapons. We call it “slicky.” You can feel the slick lubrication, plus the sticky quality that helps Friction Defense Gun Oil stay on metal parts between cleanings. As the gun cycles, some of th SPECS: ¼ oz. (7.4 ml), 2 oz. (59ml) or 4 oz. (118ml) bottle.

FRICTION DEFENSE~ GUN OIL 1/4 OZ. FRICTION DEFENSE GUN OIL $4.99 This superb, synthetic oil works on all firearms: full-auto, semi-auto, single-shot, pistols, rifles, and shotguns. It contains not one, but two of the finest lubricants available – Teflon and Moly (molybdenum disulfide) – and lubricates effectively from -75° F to +425° F. Unique heat transfer properties actually pull heat away from friction points, and extreme pressure additives keep Friction Defense on the parts, even in the hardest cycling semi-auto pistols and rifles, including full-auto military weapons. We call it “slicky.” You can feel the slick lubrication, plus the sticky quality that helps Friction Defense Gun Oil stay on metal parts between cleanings. As the gun cycles, some of th SPECS: ¼ oz. (7.4 ml), 2 oz. (59ml) or 4 oz. (118ml) bottle.

FRICTION DEFENSE~ GUN OIL 2 OZ. FRICTION DEFENSE GUN OIL $4.99 This superb, synthetic oil works on all firearms: full-auto, semi-auto, single-shot, pistols, rifles, and shotguns. It contains not one, but two of the finest lubricants available – Teflon and Moly (molybdenum disulfide) – and lubricates effectively from -75° F to +425° F. Unique heat transfer properties actually pull heat away from friction points, and extreme pressure additives keep Friction Defense on the parts, even in the hardest cycling semi-auto pistols and rifles, including full-auto military weapons. We call it “slicky.” You can feel the slick lubrication, plus the sticky quality that helps Friction Defense Gun Oil stay on metal parts between cleanings. As the gun cycles, some of th SPECS: ¼ oz. (7.4 ml), 2 oz. (59ml) or 4 oz. (118ml) bottle.

GUN BOX 390340000 GUN BOX $16 GUN BOX

1911 AUTO FACTORY PLUS PARTS 1911 AUTO EXTENDED EJECTOR, BLUED $29.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

SEMI-AUTO RECOIL MANAGEMENT SYSTEM 12254 RACE GUN S/S GUIDE ROD SYSTEM $89.95 Drop-in sytem provides significant reduction in felt recoil and grip fatigue. Plus, it keeps the gun “flat” so your sights stay on target to help you shoot faster. Bright polished, stainless steel guide rod fitted with a chrome silicon, secondary spring that reduces slide-to-frame impact with no loss of reliable cycling. Softens the recoil impulse by gradually slowing the slide to prevent frame battering; helps extend your pistol’s service life. Tungsten models add extra weight out front for even greater recoil reduction. 1911 models can be tuned by changing recoil springs. Completely reliable and extends the life of your pistol. Models marked with a * include a new recoi SPECS: 17-4 stainless steel (SS), heat treated to Rc 38-42 Tungsten (TU) adds 1.5 oz. (42.5g). Polished finish.Select Bushing Plug (BP) or Reverse Plug (RP) for 1911 models. Includes instructions.

1911 AUTO FACTORY PLUS PARTS R16A MAINSPRING $4.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R30 DISCONNECTOR $19.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R31 SEAR $14.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

LONG GUN DRAG BAG LONG GUN DRAG BAG, BLACK $284.99 Whether you’re quietly low crawling into position or covering five clicks at double time in the dark this entirely self-contained weapon transport system provides greater protection and carrying ease for both semi-auto and bolt action long guns. Shields your coveted, scoped rifle from damage with fully padded sides covered in 1000 denier Nytaneon nylon and high density, 1″ closed cell foam. Hide-away/detachable padded shoulder straps with quick-clip center stabilizer allow either muzzle up or muzzle down carry position for faster deployment. Exterior pouches all feature durable YKK zippers with dual sliders. Accessory pouches and main rifle compartment feature 1″ wide adjustable internal s SPECS: Nytaneon brand ballistic nylon, 1000 denier cordura, black. 51″ (129cm) long 10” (25cm) tall at widest point, 6½ lb (3 kg) wt. Front cargo pouch – 8½” (21cm) wide, 23” (58cm) long, 2” (5cm) deep. Rear cargo pouch. 9½” (232cm) wide, 12” (30cm) long, 2” deep. Accepts scoped rifles up to 48”

1911 AUTO PARTS 1911 STRUT $4.99 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO PARTS 1911 DISCONNECTOR $23.99 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO FACTORY PLUS PARTS R5 BARREL LINK PIN BLUE $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R12 FIRING PIN SPRING $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R15 MAGAZINE CATCH BLUE $15.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R15S MAGAZINE CATCH STAINLESS STEEL $17.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R15B MAGAZINE CATCH LOCK BLUE $2.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R16B MAINSPRING CAP BLUE $2.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R16BS MAINSPRING CAP STAINLESS STEEL $2.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R16C MAINSPRING PIN RETAINER BLUE $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R16D MAINSPRING CAP PIN BLUE $4.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R17 MAINSPRING HOUSING PIN BLUE $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R19 HAMMER STRUT $3.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R20 HAMMER STRUT PIN BLUE $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R21 HAMMER PIN BLUE $4.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R21S HAMMER PIN STAINLESS STEEL $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R28 GRIP SCREW BLUE, EACH $1.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R29 SEAR SPRING $4.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R32 SEAR PIN BLUE $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R32S SEAR PIN STAINLESS STEEL $2.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R33A PLUNGER SPRING ASSEMBLY BLUE $4.45 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R33 PLUNGER TUBE BLUE $11.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R36 EJECTOR PIN $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

M16/M4 FULL-AUTO PARTS SP61955 FULL AUTO TRIGGER, A1 $46.99 Factory original, fire control parts keep your select-fire Colt M16/M4 shooting reliably, so you’ll be prepared to face intensive tactical operations with the confidence of knowing your weapon won’t let you down. These parts are precision engineered and manufactured to strict quality control standards from the finest materials for correct fit in your gun. All NFA rules apply. SPECS: Steel. Matte black finish.

1911 AUTO PARTS 1911 REVERSE PLUG 6 $12.19 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO PARTS 1911 REVERSE PLUG COMMANDER $9.69 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO PARTS 1911 TRIK TRIGGER $24.99 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO PARTS 1911 PIN SET, BLUE $9.99 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO PARTS 1911 REVERSE PLUG 5 $9.69 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO PARTS 1911 MAG CATCH, BLUE $20.99 High-quality, precision-machined parts from the name that means “custom quality” to serious pistol shooters. Build the ultimate custom 1911 Auto for target, action-pistol, or tactical applications. Repair or return an existing gun to factory specs or assemble a racegun that fits your exact needs. Choose from parts in blued carbon steel or natural-finish stainless. SPECS: Fits 1911 Auto. Carbon steel, blue (B), in-the-white (W), or stainless steel (SS) natural-finish. Trik Trigger has stainless steel bow and skeletonized aluminum shoe. Gunsmith fitting required. Caliber-specific parts are

1911 AUTO FACTORY PLUS PARTS R5S BARREL LINK PIN STAINLESS STEEL $1.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R10,45 FRNG PIN,.45ACP SERIES 70 OR 80 $14.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R10,38 FIRING PIN, 9MM/38S SERIES 80 $14.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R11 FIRING PIN STOP PRE-SERIES 80 $16.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R15BS MAGAZINE CATCH LOCK S/S $2.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R16DS MAINSPRING CAP PIN S/S $4.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R17S MAINSPRING HOUSING PIN S/S $2.95 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R20S HAMMER STRUT PIN STAINLESS STEEL $4.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

1911 AUTO FACTORY PLUS PARTS R28S GRIP SCREW STAINLESS STEEL, EACH $1.99 Just like original parts for building a 1911 Auto or returning a gun to factory specifications. SPECS: Fits 1911 Auto. Stainless (S) and Carbon steel, blue, (B) matte finish. Plunger Spring Assembly includes spring, slide stop and thumb safety plungers.

Raytek MT4 Mini Temp Non-Contact Thermometer Gun with Laser Sighting $35.37 Large, easy-to-read backlit display! Give instant non-contact readings, just point and shoot. Unlimited automotive and other uses! Measure in Celsius or Fahrenheit with an ultra-fast response time. First number in distance to spot ratio indicates how far away you can be from target(in inches, to measure area of 1in. diameter circle). Operates on one 9V or NiCad battery….

Classic Accessories Pressure Washer Cover 79507 $18.24 The Classic Accessories pressure washer cover protects your pressure washer against rust, dirt and sun damage. This cover is designed to fit both vertical- and horizontal-style pressure washers and to cover attached hose reels as well. The elastic shock cord in the bottom hem provides a quick, custom-like fit, and the click-it closure allows you to install and remove the cover in a snap. The heavy…

12 CREATEX COLORS PAINT SET-Airbrush-Spray Gun-Auto-Art $35.96 Createx Airbrush Colors are professional grade airbrush colors which are manufactured with the highest quality control standards. Createx uses the finest pigments available and the colors have a brightness and richness unmatched by others. Createx can be used on a variety of surfaces (i.e. fabrics, leather, canvas, paper, wood, ceramics, and clay) with permanent results….

Deadline Auto Theft (1983) / Gone in 60 Seconds: 2 (1988) [Double Feature] $10.91 GONE IN 60 SECONDS 2/DEADLINE AUTO THEFT (DVD MOVIE)…

Colt 1911 Auto with Master Gunsmith Ron Phillips (DVD) $34.95 Gunsmith Ron Phillips, of Wilson’s Gun Shop, shows you how to completely disassemble the 1911 AI pistol to its smallest parts and then reassemble in the correct order for optimum safety and reliability. Attention is paid to the order of disassembly and the nomenclature of parts as well as the proper lubrication points and amount of lubricant….

What is a good semi/full auto airsoft gun for under 100 $$?

starting to get into airsoft and need a combat ready airsoft semi/full auto gun

There are a number of good options for you. The most important question that you can answer is what type of gun you like (M4/M16, H&K guns like MP5’s and G36’s, L85’s, AK’s, M14’s, AUG’s, etc).

The best way to choose is by looking at the best manufacturers. New model CYMA’s are great (CM031 or newer), which includes the CYMA M14 (CM032), AK74 (CM031A), CYMA Thompson, and AKS74U (CM035).

JG is typically very reliable, so you can go with any JG, the best probably being the v.3 G36C, and the worst being the M-series guns, excepting the S-System which is great.

Army makes 2 great guns, the AK47 and the L85.

Dboys makes nice M4/M16 clones.

A&K is decent, but not great.

Avoid WELL and JLS at all costs. Both of those have serious issues.

I recommend ordering from www.pointact.com if you can meet the minimum order, or else from www.airsplat.com. Both are very reliable and have the best prices.

For all around great guns, the JG G36C and CYMA AKS74U are probably the best clones. Other good ones include the CYMA M14 and Thompson, the Dboys AKS74U and AKS74M, and the Army AK47 and the Army L85A1. The JG AUG is also pretty decent. Those would be my recommendations, although you may not be able to find some of those for cheap. The JG G36C is probably your best bet for a cheap budget gun.

Advent of the Reliable Auto Pistol Part 1