Get more performance at the range for less with Winchester Super Target shotshells. Designed to give you outstanding clay-busting performance at the range or in competitions without hitting your wallet as hard as many competitors. Up to 1200 fps. Shells are 2-3/4” long. 25 rounds per box. Features: Great shells for trap and skeet shooting Winchester quality Top performance (up to 1200 fps) Value price
Remington Managed-Recoil STS Target Shotshells give you the perfect combination of reduced recoil with reliable, consistent performance. Managed-Recoil STS target loads offer up to 40% less recoil in the 12-ga. load with target-grinding STS consistency and pattern density. These shells are great for new shooters and skeet and trap competitors who face high-volume practice. Reloadable shells also give handloaders unmatched reloading ease and hull longevity. 25 shells.
Remington’s STS Target Loads have taken shot-to-shot consistency to a new performance level, setting the standard at all major skeet, trap, and sporting clays shoots across the country. STS Target Loads provide handloaders with unmatched reloading ease and hull longevity. Available in most gauges, our Premier? STS shells are the most reliable, consistent and most reloadable shells you can shoot. 25 per box.
Since 1965, the Winchester AA family of target loads has proven to be the best-performing ever developed with velocities up to 1200 FPS (feet per second). These shotshells are designed to give you outstanding clay-busting performance in sporting clays, trap and skeet?all at a highly competitive, value price. Shell after shell, AA shotshells deliver hard shot for tight patterns, clean burning, reliable powder and primer, and high strength reloadable hulls in loads to meet every shooter’s needs. All .410 shells are 2-1/2″, all others 2-3/4″. 25 rounds per box. Features: Outstanding clay- and target-busting performance shot after shot Value priced for high-volume shooters Hard shot for tight patterns Clean burning, reliable powder and primer High strength, reloadable hulls 25 rounds
A $6.99 value! Set the standard at all major skeet, trap and sporting clays events Shot-to-shot consistency Most reliable, consistent and reloadable shells you can shoot Loaded with Gun Club grade shot, Premier STS Primers and Power Piston 1-pc. wads Remington’s Gun Club Target Loads have taken shot-to-shot consistency to a new performance level, while providing handloaders with unequaled reloading ease and hull longevity. Available in most gauges, Remington Gun Club Target Loads are the most consistent, reliable and reloadable shells you can shoot. Remington Gun Club Target Loads are your best choice for economical shooting. Loaded with Gun Club Grade Shot, Premier STS Primers and Power Piston One-Piece Wads, Remington Gun Club Target Loads receive the same care in loading as Remington’s top-of-the-line shells. Many shooters are discovering they can get acceptable reloading life while stretching their shooting dollar. Made in USA.
Winchester is continuing a shotshell manufacturing pedigree of quality and innovation that extends back to 1886. From the 19th through the 20th, and now into the 21st century, Winchester has led the industry in ground-breaking developments in shotshell loads and components. These AA Heavy Target Load shotshells are designed to give you outstanding clay-busting performance in sporting clays, trap and skeet, all at a highly competitive, value price. 25 per box.
Remington’s STS Target Loads have taken shot-to-shot consistency to a new performance level, setting the standard at all major skeet, trap, and sporting clays shoots across the country, while providing handloaders with unmatched reloading ease and hull longevity. Available in most gauges, our Premier STS shells are the most reliable, consistent and most reloadable shells you can shoot. Light Target Loads have lower dram equivalents that offer less recoil and slightly lower velocities. 1145 FPS. 25 per box.
Skeet & Sport Shooting as a discipline offers the greatest variety of targets requiring the greatest amount of skill. In this program we join a predicted future world champion, Carl Bloxham and performance hancement specialist, Phil Coley. The program covers the very essence of this traditional and extremely popular sport. Running Time: 60 min….
Bumble Bee Bowling is the bowling game of bumpin’ bees! Have fun indoors or outdoors as you roll the whimsical bumblebees into the honeycomb to score points and win! It’s Home Sweet Hive fun in your backyard!For 1 – 2 players, ages 3 and up.Note that the colors of the components may vary from those pictured….
The Gun Digest Book of Trap & Skeet Shooting, 5th Ed., covers every facet of trap and skeet shooting and provides valuable insight on how to improve and win at clay-busting sports.Choose the right shotgun, and fit the gun to your needs.Understand the hows and whys of chokes – in plain language!Get the most current data on shells, loads, and reloading.From the latest rules and regulations to the ho…
Like his other volume, Precision Shooting, James Russell’s Trap Shooting Secrets is thick with tips, advice, techniques, and practice drills for anyone intent on improving his or her skills in a highly refined, complex, and technically demanding sport. Russell begins with a primer on buying the right shotgun, and builds from there on the essentials of basic shooting and a whole gamut of typi…
Do you think I should start Paintballing, or target and trap shooting?
The type of real shooting i would be doing would be skeet or trap shooting. Also, i would probably do some rifle and handgun. Which would be better, that or paintballing. Thanks.
well it really depends on what you want to get out of your activity. I personally prefer handgun. but paint balling involves more physical activity. are you wanting to learn to shoot for self-defense or just for fun?
Advanced Target Shooting Tips : Doubles Skeet Shooting at Station One
Portable storage for 12 or 20 gauge shotshells. Comes complete with two 50 round dual gauge trays, a large handle, outside lid compartments, water-resistant lid, 5 cripple load holders, mechanical hinge, and lockable latch. Made in USA. Manufacturer model #: SF100D-09.
Lightweight, polymer shell holder keeps extra ammo handy for fast loading. Provides instant access to five rounds of spare 12 ga. ammo. Carrier attaches to either side of any full length wood or synthetic stock using six screws. SPECS: Elastomeric polymer, black. 5″ (12.5cm) long. Installation requires modification to stock.
Patented shotshell holder securely holds four 12 gauge shells away from your belt and leaves plenty of room for your hand to grab them for fast, smooth reloads. Mounts securely to your belt so there’s no fumbling for shells in the heat of competition. Converts easily for left- or right-hand use by simply turning base around. Swivel base mount system gives front to back cant adjustment; enables the shooter to find the perfect angle for grabbing shells quickly. Knob Kit – Two knob-headed screws replace the factory swivel base screws for fast cant adjustment without the need for an Allen wrench. SPECS: Molded polymer, black. 4½” (11.4cm) long, 2” (5cm) wide (from swivel base attachment.) Holds four 12 gauge shotgun shells. Knob Kit – Contains two screw-in knobs with 1-1⁄8″ (2.8cm) dia. knobs.
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Three, hand formed pouches hold six shotshells in pairs, making it easy to select two at time for reloading double barreled coach gun. Shells sit up high, leaving plenty of the cartridge head accessible to grab. Brown color SPECS: Top grain American leather, brown. Fits belts up to 3″ (7.6cm) wide.
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Three, hand formed pouches hold six shotshells in pairs, making it easy to select two at time for reloading double barreled coach gun. Shells sit up high, leaving plenty of the cartridge head accessible to grab. Brown color SPECS: Top grain American leather, brown. Fits belts up to 3″ (7.6cm) wide.
The #1 source for Shotshell Reloading information Expanded Non-Toxic Data Section Articles on Non-Toxic Shot by Nick Sisley ”Tips and Techniques from the Pro’s at MEC” Popular Case Identification Section Slug and Buckshot Loads The Lyman Shotshell Reloading Handbook: 5th Edition contains over 230 pages of data. The Lyman Shotshell Reloading Handbook is a complete up-to-date shotshell reloading manual covering cases, wads and primers currently offered by all leading manufacturers, in all gauges from .410 to 10 gauge. Also included are the most popular powders from Alliant, Hodgdon, Accurate, IMR, VihtaVuori, Ramshot and Winchester.
An all-around shotshell case for hunting and shot shell sports. Features four 25-round shotshell trays with a unique tray holding belt. Dimensions: 15.1”L x 9.1”W x 8.5”H. Color: Wild Camo.
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Lightweight, polymer shell holder provides instant access to two spare 12 gauge shotshells for rapid reloads during competition or tactical operations. Compact, low-cut profile allows an easy grasp of exposed shells for quick removal without hang-ups. Features a one-piece, wrap around belt clip with extra-long bottom hook for worry-free retention. Molded polymer construction. Fits belts up to 2¼" (5.7cm) wide. SPECS: Molded polymer, black. 1-7⁄8” (4.7cm) long, 1¾” (4.4cm) wide, 2½” (6.3cm) high. Fits belts up to 2¼” (5.7cm) wide. 12 gauge only.
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Heavy, 2″ wide, leather shotshell belt holds 24 rounds of 12-gauge ammo for wickedly fast reloads on the shotgun stages. Double-ply stops sewn underneath the loops keep the shells up high for easy access. Designed to cover mos SPECS: Belt – Top grain American leather, chestnut. Buckle – Brass, nickel-plated finish. Belt lengths are measured from the center buckle hole and will accommodate two inches up or down from the specified length. Measure where you will wear the belt with a tape measure, and that will be the size
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Heavy, 2″ wide, leather shotshell belt holds 24 rounds of 12-gauge ammo for wickedly fast reloads on the shotgun stages. Double-ply stops sewn underneath the loops keep the shells up high for easy access. Designed to cover mos SPECS: Belt – Top grain American leather, chestnut. Buckle – Brass, nickel-plated finish. Belt lengths are measured from the center buckle hole and will accommodate two inches up or down from the specified length. Measure where you will wear the belt with a tape measure, and that will be the size
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Heavy, 2″ wide, leather shotshell belt holds 24 rounds of 12-gauge ammo for wickedly fast reloads on the shotgun stages. Double-ply stops sewn underneath the loops keep the shells up high for easy access. Designed to cover mos SPECS: Belt – Top grain American leather, chestnut. Buckle – Brass, nickel-plated finish. Belt lengths are measured from the center buckle hole and will accommodate two inches up or down from the specified length. Measure where you will wear the belt with a tape measure, and that will be the size
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Heavy, 2″ wide, leather shotshell belt holds 24 rounds of 12-gauge ammo for wickedly fast reloads on the shotgun stages. Double-ply stops sewn underneath the loops keep the shells up high for easy access. Designed to cover mos SPECS: Belt – Top grain American leather, chestnut. Buckle – Brass, nickel-plated finish. Belt lengths are measured from the center buckle hole and will accommodate two inches up or down from the specified length. Measure where you will wear the belt with a tape measure, and that will be the size
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Heavy, 2″ wide, leather shotshell belt holds 24 rounds of 12-gauge ammo for wickedly fast reloads on the shotgun stages. Double-ply stops sewn underneath the loops keep the shells up high for easy access. Designed to cover mos SPECS: Belt – Top grain American leather, chestnut. Buckle – Brass, nickel-plated finish. Belt lengths are measured from the center buckle hole and will accommodate two inches up or down from the specified length. Measure where you will wear the belt with a tape measure, and that will be the size
Tailored to improve your speed of draw, reload time, overall shooting form and comfort. Each piece is handcrafted from top grain, vegetable-tanned leather, border stitched where needed, and sealed along the edges, then dyed to a rich, hue that grows increasingly more beautiful with wear. The Long Hunter Series of products combines the shooting experience of two-time, modern world champion Jim Finch, aka Long Hunter, with the expert craftsmanship of Kirkpatrick Leather. Heavy, 2″ wide, leather shotshell belt holds 24 rounds of 12-gauge ammo for wickedly fast reloads on the shotgun stages. Double-ply stops sewn underneath the loops keep the shells up high for easy access. Designed to cover mos SPECS: Belt – Top grain American leather, chestnut. Buckle – Brass, nickel-plated finish. Belt lengths are measured from the center buckle hole and will accommodate two inches up or down from the specified length. Measure where you will wear the belt with a tape measure, and that will be the size
Patented shotshell holder securely holds four 12 gauge shells away from your belt and leaves plenty of room for your hand to grab them for fast, smooth reloads. Mounts securely to your belt so there’s no fumbling for shells in the heat of competition. Converts easily for left- or right-hand use by simply turning base around. Swivel base mount system gives front to back cant adjustment; enables the shooter to find the perfect angle for grabbing shells quickly. Knob Kit – Two knob-headed screws replace the factory swivel base screws for fast cant adjustment without the need for an Allen wrench. SPECS: Molded polymer, black. 4½” (11.4cm) long, 2” (5cm) wide (from swivel base attachment.) Holds four 12 gauge shotgun shells. Knob Kit – Contains two screw-in knobs with 1-1⁄8″ (2.8cm) dia. knobs.
33% glass-filled nylon with pebble-grain surface, provides secure handling in all weather conditions. Furnished with a complete set of adapters and spacers for installation on 12 ga. Mossberg 500, Maverick 88, Remington 870, and Winchester 1200/1300 pump shotguns. Easy to install, requires no modifications to firearm. Lightweight, elastomeric polymer shellholder keeps extra ammo within easy reach for rapid reloads and is designed to mount easily on pre-drilled Shotforce Collapsible Stocks. Holds five 12 gauge rounds. Mounts securely to either side of stock with two screws. SPECS: Molded elastomeric polymer, matte black. 5″ (12.5cm) long.
Features a clip and clear card slot Mossy Oak Break-Up pattern Accented with brown leather Lighten your load while keeping your cash and cards secure with this Bass Pro Shops Shotshell Front Pocket Money Clip in Mossy Oak Break-Up . Ideal for the outdoorsman, this handy money clip features a clear pocket that is perfect for your credit cards or ID. Put your love of the outdoors on display with this Bass Pro Shops Shotshell Front Pocket Money Clip. Size: 4”H x 2-3/4”W x 3/8”D. Imported. Makes a great gift for hunters and outdoor enthusiasts!
A great way to pack shells in and out. Divided interior keeps live and spent shotshells separate. Includes matching premium leather belt, adjustable for 32″-46″ waist. Made in USA. Manufacturer model #: 556.
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal SantopreneRugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Extensive testing with a variety of commonly-used reloading powders has shown that these 209 Premier STS primers, in comparison with other commonly-used primers, create reductions of up to 40 percent in the high-to-low spread of velocities in reloads. This resulting improvement in velocity consistency is an important benefit to those reloading target loads for practice or competition. 209 Premier STS primers can be substituted for Remington’s previous 209P primers without changes in published reloading formulas. 100 per pack
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5¼” (13.3cm) long x 1½” (3.8cm)
American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. SPECS: Steel, round files. 7¾” (15cm) long x 1⁄8″ (3.2cm) or 5⁄32″ (3.9cm) dia.; 9½” (15cm) long x 3⁄16″ (4.7cm), 7⁄32″ (5.5cm), or ¼” (6.3cm) dia.
American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. SPECS: Steel, round files. 7¾” (15cm) long x 1⁄8″ (3.2cm) or 5⁄32″ (3.9cm) dia.; 9½” (15cm) long x 3⁄16″ (4.7cm), 7⁄32″ (5.5cm), or ¼” (6.3cm) dia.
American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. SPECS: Steel, round files. 7¾” (15cm) long x 1⁄8″ (3.2cm) or 5⁄32″ (3.9cm) dia.; 9½” (15cm) long x 3⁄16″ (4.7cm), 7⁄32″ (5.5cm), or ¼” (6.3cm) dia.
American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. SPECS: Steel, round files. 7¾” (15cm) long x 1⁄8″ (3.2cm) or 5⁄32″ (3.9cm) dia.; 9½” (15cm) long x 3⁄16″ (4.7cm), 7⁄32″ (5.5cm), or ¼” (6.3cm) dia.
American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. SPECS: Steel, round files. 7¾” (15cm) long x 1⁄8″ (3.2cm) or 5⁄32″ (3.9cm) dia.; 9½” (15cm) long x 3⁄16″ (4.7cm), 7⁄32″ (5.5cm), or ¼” (6.3cm) dia.
This extension is currently available in +3 and +4 configurations for the 870, 1100, and 1187 shotguns. Manufactured to offer added shell capacity, this is one of the finest machined shotshell tubes currently available. Each tube offers an unique swirl style barrel nut that adding a distinctive look and sure grip.
This extension is currently available in +3 and +4 configurations for the 870, 1100, and 1187 shotguns. Manufactured to offer added shell capacity, this is one of the finest machined shotshell tubes currently available. Each tube offers an unique swirl style barrel nut that adding a distinctive look and sure grip.
In December of 1992, Brownells changed from a Round Face Mixer with a slip-in Tee-Valve to a Flat Face Mixer with a screw-in Tee-Valve. The parts listed below fit the Round Face Mixers.
In December of 1992, Brownells changed from a Round Face Mixer with a slip-in Tee-Valve to a Flat Face Mixer with a screw-in Tee-Valve. The parts listed below fit the Round Face Mixers.
The shotshell dry box holds 100 shotshells in two removable trays. Popular with waterfowl hunters during the hunting season and a dry box to use in the off season. The lid has a O-Ring design for water resistant sealing on those wet days and is removable for a less space needed in the hunting blind. Generously proportioned fold down handle and large latch for easy opening. Lockable. Color: Camo …
Places extra shells right where you need them for a fast reload.The patented TacStar Sidesaddle mounts 6 extra rounds on your shotgun in a convenient and accessible location for fast reloading. The tough, weatherproof shell carrier is attached to an aluminum mounting plate that installs directly on the shotgun receiver.
All mounting screws are included, no gunsmithing required. Installation is ea…
Places extra shells right where you need them for a fast reload.The patented TacStar Sidesaddle mounts 6 extra rounds on your shotgun in a convenient and accessible location for fast reloading. The tough, weatherproof shell carrier is attached to an aluminum mounting plate that installs directly on the shotgun receiver.
All mounting screws are included, no gunsmithing required. Installation is ea…
Any hunting value in shotshell value packs from Walmart?
Walmart carries value packs of 100 shotshell rounds, made by Winchester, Federal, or Remington. All have the same specs: 12gauge, 2 3/4 inch, 3 dr. eq., 1 1/8 oz, 7 1/2 shot.
The manufacturers websites do not even list them as their products. Probably, they are made only for Walmart.
My questions are: are the shots really made of lead?, do they have any value for hunting? Can you kill a racoon with this shotshell?
The shot in the shell is lead and yes, they will kill a Raccoon. I would recommend a full choke if you are going to shoot Raccoon with this shell. You’lll need to shoot them inside of 20 yards for this round to be effective.
I hate quoting wikipedia, but there is a good illustration of a shotgun shell here:
High-carbon steel springs help you tune the gun for dependable cycling and performance. High tensile strength ensures long service life. Extra Power hammer spring provides plenty of force to ignite the toughest primer. Use Extra Power recoil spring for heavy loads; Reduced Power for light loads. Extra Power magazine spring has approximately 15% more power than factory original spring to improve feeding and reliability. For Super 90 series shotguns with three-round magazines only. SPECS: High-carbon spring steel. Magazine spring fits Benelli Super 90 shotguns with three-round magazines only.
Rugged, all steel construction with high visibility tritium inserts provide optimum sight definition in low light conditions. Front and rear sights have their own tritium source. Constant light level, not affected by weather; maintenance free. Warranted for five years. SPECS: Blued steel with tritium inserts. M1 Benelli has post front and ghost ring rear. Fits M1 and M3 Ghost Ring. Tactical Benelli fits M1 Tactical M and Practical. Remington fits guns originally equipped with rifle sights. Mossberg has front post only.
Rugged, all steel construction with high visibility tritium inserts provide optimum sight definition in low light conditions. Front and rear sights have their own tritium source. Constant light level, not affected by weather; maintenance free. Warranted for five years. SPECS: Blued steel with tritium inserts. M1 Benelli has post front and ghost ring rear. Fits M1 and M3 Ghost Ring. Tactical Benelli fits M1 Tactical M and Practical. Remington fits guns originally equipped with rifle sights. Mossberg has front post only.
High-carbon steel springs help you tune the gun for dependable cycling and performance. High tensile strength ensures long service life. Extra Power hammer spring provides plenty of force to ignite the toughest primer. Use Extra Power recoil spring for heavy loads; Reduced Power for light loads. Extra Power magazine spring has approximately 15% more power than factory original spring to improve feeding and reliability. For Super 90 series shotguns with three-round magazines only. SPECS: High-carbon spring steel. Magazine spring fits Benelli Super 90 shotguns with three-round magazines only.
Designed for tactical operations, these mounts place the rear sling attachment point in front of the operator, so you can quickly shoulder your weapon without getting tangled. Allows single point sling attachment, or use with front sling mount for two-point sling installation. Loop accepts slings up to 1¼” wide. Rear Mount installs directly behind receiver, in front of buttstock. Precision machined from aluminum billet, then hardcoat anodized matte black. Right hand model for Remington 870, 1100, and 11-87 positions sling on left side of stock. Benelli version fits M1, M3, and Super 90 combat shotguns, and can be positioned with the loop on either side of the receiver to accommodate SPECS: Rem Rear Mount – Aluminum, matte black. ¼” (6.4mm) long, 1-13⁄16″ (4.6cm) wide, 17⁄8″ (4.8cm) high. Fits 870/1100/11-87, Right Hand only. Benelli Rear Mount – Aluminum, matte black. 3⁄16″ (4.8mm) long, 1-15⁄16″ (4.8cm) wide, 1-31⁄32″ (5cm) high.
Lightweight mounts fit over and attach to both sides of the receiver to give balanced support for any scope. Strongly built to withstand even hard-hitting slug recoil. Installs in minutes; just remove the trigger group pins and replace with bolts included. Use Weaver-style rings (not supplied). Benelli Tactical features a Picatinny base. Has a slight forward tilt that limits range to 25 yards for close quarters, dynamic entry engagements. Fits M1 Super 90. SPECS: Aluminum, black, anodized finish. Approx. 6″ (15.2cm) long, 2½” (6.3cm) high. Includes bolts, wrenches, instructions.
Oversized, smooth-contoured replacement for factory cocking handle is shaped for comfort and fast, easy operation to help you bring your Beretta or Benelli semi-auto shotgun into action quickly. No more having to make several swipes at the handle before engaging it -and abrading your hand when you finally do. Precision machined from high-grade aluminum or stainless steel billet for strength, durability, and corrosion resistance. Available in natural silver or with a durable black finish that matches your gun’s bluing. Benelli fits 12 gauge only and is available in fixed, non-rotating Locating style or free-spinning Non-Locating model. Beretta – separate models fo SPECS: Benelli – Stainless steel, matte black or natural silver finish. Available in Locating and Non-Locating styles. 12 gauge only. Beretta – Aluminum, anodized, semi-gloss black finish. Fits 390/391 shotguns; separate models for 12 and 20 gauge.
Oversized, smooth-contoured replacement for factory cocking handle is shaped for comfort and fast, easy operation to help you bring your Beretta or Benelli semi-auto shotgun into action quickly. No more having to make several swipes at the handle before engaging it -and abrading your hand when you finally do. Precision machined from high-grade aluminum or stainless steel billet for strength, durability, and corrosion resistance. Available in natural silver or with a durable black finish that matches your gun’s bluing. Benelli fits 12 gauge only and is available in fixed, non-rotating Locating style or free-spinning Non-Locating model. Beretta – separate models fo SPECS: Benelli – Stainless steel, matte black or natural silver finish. Available in Locating and Non-Locating styles. 12 gauge only. Beretta – Aluminum, anodized, semi-gloss black finish. Fits 390/391 shotguns; separate models for 12 and 20 gauge.
Oversized, smooth-contoured replacement for factory cocking handle is shaped for comfort and fast, easy operation to help you bring your Beretta or Benelli semi-auto shotgun into action quickly. No more having to make several swipes at the handle before engaging it -and abrading your hand when you finally do. Precision machined from high-grade aluminum or stainless steel billet for strength, durability, and corrosion resistance. Available in natural silver or with a durable black finish that matches your gun’s bluing. Benelli fits 12 gauge only and is available in fixed, non-rotating Locating style or free-spinning Non-Locating model. Beretta – separate models fo SPECS: Benelli – Stainless steel, matte black or natural silver finish. Available in Locating and Non-Locating styles. 12 gauge only. Beretta – Aluminum, anodized, semi-gloss black finish. Fits 390/391 shotguns; separate models for 12 and 20 gauge.
Oversized, smooth-contoured replacement for factory cocking handle is shaped for comfort and fast, easy operation to help you bring your Beretta or Benelli semi-auto shotgun into action quickly. No more having to make several swipes at the handle before engaging it -and abrading your hand when you finally do. Precision machined from high-grade aluminum or stainless steel billet for strength, durability, and corrosion resistance. Available in natural silver or with a durable black finish that matches your gun’s bluing. Benelli fits 12 gauge only and is available in fixed, non-rotating Locating style or free-spinning Non-Locating model. Beretta – separate models fo SPECS: Benelli – Stainless steel, matte black or natural silver finish. Available in Locating and Non-Locating styles. 12 gauge only. Beretta – Aluminum, anodized, semi-gloss black finish. Fits 390/391 shotguns; separate models for 12 and 20 gauge.
Machined, not cast, from a block of solid but lightweight titanium for outstanding strength and reduced weight. Knurled design provides a solid, no-slip, can’t miss handle for fast, positive reloads, even while on the run or engaging in high-stress tactical maneuvers. Replaces factory charging handle, no gunsmithing required. SPECS: Titanium. Benelli M1 – Polished silver finish. 2-1⁄8″ (5.4cm) long x ¾” (1.9cm) diameter. 1 oz.(28g) wt. Fits Benelli M1 Super 90 shotgun. Benelli M4 – Black, matte finish: 2” (5cm) long x ½” (1.3cm) diameter. .3 oz. (8.5g) wt. Fits Benelli M4.
Easy-to-install magazine extender increases your 12-gauge shotgun’s capacity by up to four additional 2¾” shells. Perfect for military, law enforcement, or home defense use. Corrosion-resistant, stainless steel extension tube with machined aluminum mounting collar, high strength stainless steel spring, and anodized aluminum follower help ensure reliable feeding in the harshest salt water, marsh hunting, or tactical environment. Installs in minutes, no special tools required. Available in two, three, and four round models. Benelli M4 available in two round only. SPECS: Stainless steel extension tube with anodized aluminum mounting collar, matte black; stainless steel spring; anodized aluminum follower, red; plastic spring retainer, black; steel barrel support clamp with integral sling loop, black. M4 kit contains extension tube, spring, and follo
All-steel extension tubes attach directly to the end of the magazine tube and increase capacity by as much as five rounds. Extension cap is machined from solid steel and welded to seamless steel tubing for extra strength. Includes extended magazine spring. Barrel Magazine Clamp (BMC) – Clamps to the barrel and the extended mag tube. Stabilizes and supports the tube; includes built-in sling swivel stud. Benelli 3-round and Remington 5-round magazine extensions include barrel magazine clamp. Barrel clamp available separately for all other models. SPECS: Steel, blue, matte finish. 12 ga. only. Rounds (RDS) indicates number of rounds extension adds to factory magazine capacity model. BMC-R Clamp – Fits Benelli Nova/Super Nova/M4, Rem. 870, and Win. 1200/1300 Def. BMC-U Clamp – Fits Rem. 1100/11-87.
All-steel extension tubes attach directly to the end of the magazine tube and increase capacity by as much as five rounds. Extension cap is machined from solid steel and welded to seamless steel tubing for extra strength. Includes extended magazine spring. Barrel Magazine Clamp (BMC) – Clamps to the barrel and the extended mag tube. Stabilizes and supports the tube; includes built-in sling swivel stud. Benelli 3-round and Remington 5-round magazine extensions include barrel magazine clamp. Barrel clamp available separately for all other models. SPECS: Steel, blue, matte finish. 12 ga. only. Rounds (RDS) indicates number of rounds extension adds to factory magazine capacity model. BMC-R Clamp – Fits Benelli Nova/Super Nova/M4, Rem. 870, and Win. 1200/1300 Def. BMC-U Clamp – Fits Rem. 1100/11-87.
Lightweight aluminum or stainless steel followers for Remington, Mossberg, Benelli, and Browning shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immediately if the magazine is empty. Vented design reduces weight to allow for smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. SPECS: Aluminum; Stainless Steel. Browning followers fit the A-5 only.
Lightweight aluminum or stainless steel followers for Remington, Mossberg, Benelli, and Browning shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immediately if the magazine is empty. Vented design reduces weight to allow for smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. SPECS: Aluminum; Stainless Steel. Browning followers fit the A-5 only.
Lightweight aluminum or stainless steel followers for Remington, Mossberg, Benelli, and Browning shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immediately if the magazine is empty. Vented design reduces weight to allow for smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. SPECS: Aluminum; Stainless Steel. Browning followers fit the A-5 only.
Lightweight aluminum or stainless steel followers for Remington, Mossberg, Benelli, and Browning shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immediately if the magazine is empty. Vented design reduces weight to allow for smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. SPECS: Aluminum; Stainless Steel. Browning followers fit the A-5 only.
Lightweight aluminum or stainless steel followers for Remington, Mossberg, Benelli, and Browning shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immediately if the magazine is empty. Vented design reduces weight to allow for smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. SPECS: Aluminum; Stainless Steel. Browning followers fit the A-5 only.
Lightweight aluminum or stainless steel followers for Remington, Mossberg, Benelli, and Browning shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immediately if the magazine is empty. Vented design reduces weight to allow for smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. SPECS: Aluminum; Stainless Steel. Browning followers fit the A-5 only.
Lightweight mounts fit over and attach to both sides of the receiver to give balanced support for any scope. Strongly built to withstand even hard-hitting slug recoil. Installs in minutes; just remove the trigger group pins and replace with bolts included. Use Weaver-style rings (not supplied). Benelli Tactical features a Picatinny base. Has a slight forward tilt that limits range to 25 yards for close quarters, dynamic entry engagements. Fits M1 Super 90. SPECS: Aluminum, black, anodized finish. Approx. 6″ (15.2cm) long, 2½” (6.3cm) high. Includes bolts, wrenches, instructions.
High-carbon steel springs help you tune the gun for dependable cycling and performance. High tensile strength ensures long service life. Extra Power hammer spring provides plenty of force to ignite the toughest primer. Use Extra Power recoil spring for heavy loads; Reduced Power for light loads. Extra Power magazine spring has approximately 15% more power than factory original spring to improve feeding and reliability. For Super 90 series shotguns with three-round magazines only. SPECS: High-carbon spring steel. Magazine spring fits Benelli Super 90 shotguns with three-round magazines only.
Oversized, smooth-contoured replacement for factory cocking handle is shaped for comfort and fast, easy operation to help you bring your Beretta or Benelli semi-auto shotgun into action quickly. No more having to make several swipes at the handle before engaging it -and abrading your hand when you finally do. Precision machined from high-grade aluminum or stainless steel billet for strength, durability, and corrosion resistance. Available in natural silver or with a durable black finish that matches your gun’s bluing. Benelli fits 12 gauge only and is available in fixed, non-rotating Locating style or free-spinning Non-Locating model. Beretta – separate models fo SPECS: Benelli – Stainless steel, matte black or natural silver finish. Available in Locating and Non-Locating styles. 12 gauge only. Beretta – Aluminum, anodized, semi-gloss black finish. Fits 390/391 shotguns; separate models for 12 and 20 gauge.
Oversized, smooth-contoured replacement for factory cocking handle is shaped for comfort and fast, easy operation to help you bring your Beretta or Benelli semi-auto shotgun into action quickly. No more having to make several swipes at the handle before engaging it -and abrading your hand when you finally do. Precision machined from high-grade aluminum or stainless steel billet for strength, durability, and corrosion resistance. Available in natural silver or with a durable black finish that matches your gun’s bluing. Benelli fits 12 gauge only and is available in fixed, non-rotating Locating style or free-spinning Non-Locating model. Beretta – separate models fo SPECS: Benelli – Stainless steel, matte black or natural silver finish. Available in Locating and Non-Locating styles. 12 gauge only. Beretta – Aluminum, anodized, semi-gloss black finish. Fits 390/391 shotguns; separate models for 12 and 20 gauge.
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. SPECS: Extension – Steel, blued or parkerized, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp – Blued or parkerized steel, front and rear 1″ swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory mag
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. SPECS: Extension – Steel, blued or parkerized, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp – Blued or parkerized steel, front and rear 1″ swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory mag
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. SPECS: Extension – Steel, blued or parkerized, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp – Blued or parkerized steel, front and rear 1″ swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory mag
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. SPECS: Extension – Steel, blued or parkerized, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp – Blued or parkerized steel, front and rear 1″ swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory mag
Eliminates pin drift in the receiver holes so your trigger housing stays in the same place for every shot. Slotted, truss head screws at each end of pin keeps trigger housing properly aligned and free of wobble. Helps deliver reliable trigger performance in tactical and competition guns. Remington includes both front and rear, anti-walk trigger pins. SPECS: Steel, blued finish. Remington – Fits Remington 870/1100/11-87. Mossberg – Fits Mossberg 500/590. Winchester – Fits Winchester 1200/1300/1400. Benelli – Fits Benelli Super 90, Winchester Super X and Browning Gold.
Easy-to-install magazine extender increases your 12-gauge shotgun’s capacity by up to four additional 2¾” shells. Perfect for military, law enforcement, or home defense use. Corrosion-resistant, stainless steel extension tube with machined aluminum mounting collar, high strength stainless steel spring, and anodized aluminum follower help ensure reliable feeding in the harshest salt water, marsh hunting, or tactical environment. Installs in minutes, no special tools required. Available in two, three, and four round models. Benelli M4 available in two round only. SPECS: Stainless steel extension tube with anodized aluminum mounting collar, matte black; stainless steel spring; anodized aluminum follower, red; plastic spring retainer, black; steel barrel support clamp with integral sling loop, black. M4 kit contains extension tube, spring, and follo
Easy-to-install magazine extender increases your 12-gauge shotgun’s capacity by up to four additional 2¾” shells. Perfect for military, law enforcement, or home defense use. Corrosion-resistant, stainless steel extension tube with machined aluminum mounting collar, high strength stainless steel spring, and anodized aluminum follower help ensure reliable feeding in the harshest salt water, marsh hunting, or tactical environment. Installs in minutes, no special tools required. Available in two, three, and four round models. Benelli M4 available in two round only. SPECS: Stainless steel extension tube with anodized aluminum mounting collar, matte black; stainless steel spring; anodized aluminum follower, red; plastic spring retainer, black; steel barrel support clamp with integral sling loop, black. M4 kit contains extension tube, spring, and follo
Easy-to-install magazine extender increases your 12-gauge shotgun’s capacity by up to four additional 2¾” shells. Perfect for military, law enforcement, or home defense use. Corrosion-resistant, stainless steel extension tube with machined aluminum mounting collar, high strength stainless steel spring, and anodized aluminum follower help ensure reliable feeding in the harshest salt water, marsh hunting, or tactical environment. Installs in minutes, no special tools required. Available in two, three, and four round models. Benelli M4 available in two round only. SPECS: Stainless steel extension tube with anodized aluminum mounting collar, matte black; stainless steel spring; anodized aluminum follower, red; plastic spring retainer, black; steel barrel support clamp with integral sling loop, black. M4 kit contains extension tube, spring, and follo
Easy-to-install magazine extender increases your 12-gauge shotgun’s capacity by up to four additional 2¾” shells. Perfect for military, law enforcement, or home defense use. Corrosion-resistant, stainless steel extension tube with machined aluminum mounting collar, high strength stainless steel spring, and anodized aluminum follower help ensure reliable feeding in the harshest salt water, marsh hunting, or tactical environment. Installs in minutes, no special tools required. Available in two, three, and four round models. Benelli M4 available in two round only. SPECS: Stainless steel extension tube with anodized aluminum mounting collar, matte black; stainless steel spring; anodized aluminum follower, red; plastic spring retainer, black; steel barrel support clamp with integral sling loop, black. M4 kit contains extension tube, spring, and follo
Minimum-drop, straight-line buttstock enhances recoil control. Pistol grip provides increased leverage to hold the muzzle down. Made from durable, poly-resin material for years of service life. Includes energy-absorbing, molded-rubber recoil pad. TAC III design incorporates additional shell storage in the buttstock. TAC IV is solid; TAC IV-S model is sized for the smaller shooter or those wearing body armor. All Remington 870 and Mossberg 500 models include the short, Law Enforcement (LE) forend and Mossberg models ONLY fit guns with a 7¾” action slide. Benelli fits Super 90, includes buttstock only, no forend. SPECS: Poly-resin, black, matte finish. Length of Pull – TAC III/ TAC IV, 14″ (35cm), TAC IV-S, 13″ (33cm). Includes forearm; sold as a set only. Fits 12 gauge only. Win. 1300 fits Model 1200/1300.
Firmly attaches to both sides of receiver using existing screw/pin holes, and won’t obstruct operation. Recoil transfers to receiver for greater strength. Multiple slots provide eye relief adjustment for mounting scopes and electronic sights. Open sight channel allows use of iron sights. SPECS: Aluminum, black, anodized. Approx. 6″ (15cm) long. Models marked w/rings include 1″ Weaver-style rings. Rem. 870 3½” – fits 3″ or 3½” Magnum 870 12 gauge shotguns.
Firmly attaches to both sides of receiver using existing screw/pin holes, and won’t obstruct operation. Recoil transfers to receiver for greater strength. Multiple slots provide eye relief adjustment for mounting scopes and electronic sights. Open sight channel allows use of iron sights. SPECS: Aluminum, black, anodized. Approx. 6″ (15cm) long. Models marked w/rings include 1″ Weaver-style rings. Rem. 870 3½” – fits 3″ or 3½” Magnum 870 12 gauge shotguns.
Rigid, aluminum, tri-rail mount lets you attach picatinny accessories such as lights, lasers, and other tactical equipment to your shotgun. Installs on the magazine tube without modifications to the gun, and will hold up to three attachments. Low mounting point keeps lights and lasers in proper alignment with the shot pattern and prevents interference with iron sights. Secures with two 8⁄32″ clamping screws. Models for most popular brands of tactical shotguns. SPECS: 6061-T6 aluminum, matte black. 1-5⁄8″ (4.2cm) long. 1″ – Fits Winchester, Remington, and FN shotgun magazine tubes. 25mm – Fits Mossberg and Ithaca shotgun magazine tubes. 26mm – Fits Benelli and Franchi SPAZ shotgun magazine tubes.
Rigid, aluminum, tri-rail mount lets you attach picatinny accessories such as lights, lasers, and other tactical equipment to your shotgun. Installs on the magazine tube without modifications to the gun, and will hold up to three attachments. Low mounting point keeps lights and lasers in proper alignment with the shot pattern and prevents interference with iron sights. Secures with two 8⁄32″ clamping screws. Models for most popular brands of tactical shotguns. SPECS: 6061-T6 aluminum, matte black. 1-5⁄8″ (4.2cm) long. 1″ – Fits Winchester, Remington, and FN shotgun magazine tubes. 25mm – Fits Mossberg and Ithaca shotgun magazine tubes. 26mm – Fits Benelli and Franchi SPAZ shotgun magazine tubes.
Rigid, aluminum, tri-rail mount lets you attach picatinny accessories such as lights, lasers, and other tactical equipment to your shotgun. Installs on the magazine tube without modifications to the gun, and will hold up to three attachments. Low mounting point keeps lights and lasers in proper alignment with the shot pattern and prevents interference with iron sights. Secures with two 8⁄32″ clamping screws. Models for most popular brands of tactical shotguns. SPECS: 6061-T6 aluminum, matte black. 1-5⁄8″ (4.2cm) long. 1″ – Fits Winchester, Remington, and FN shotgun magazine tubes. 25mm – Fits Mossberg and Ithaca shotgun magazine tubes. 26mm – Fits Benelli and Franchi SPAZ shotgun magazine tubes.
One-piece, precision machined Weaver rail lets you mount a variety of optics on your Benelli shotgun. Two cross-slots provide optimal ring spacing on a wide range of scopes, including advanced red dot optics. Low profile allows use of front sight, however optics may have to be removed. Lightweight aluminum is hardcoat anodized for durability. Attaches to factory drilled and tapped receivers using the included steel mounting screws. SPECS: Aluminum, anodized, matte black. Steel mounting screws. 47⁄16” (15.8cm) long. Fits Benelli Super Black Eagle, Super Black Eagle II, M1/M2 Field Guns, and Super Nova. Accepts Weaver-style rings.
Adjustable to nine constriction settings, these heavy-duty chokes allow you to select the proper choke for the type of shotgun shooting you’re doing. Based on the original Poly-Choke design, this new generation is fully adjustable from extra-full, to reverse choke and will handle all shotgun loads including lead slugs, heavy shot, and steel. Uses a unique, rotating method that gives you and audible “click” into place with clearly marked choke settings so finding just the right choke is simple and quick. No more fumbling around with a pocket full of choke tubes. Wrench included. SPECS: CNC machined high tensile steel. Blued. Available for vented Remington, Browning Invector, and Beretta/Benelli 12 gauge shotguns.
Compact, go-anywhere kit contains all the essential tools needed to disassemble, maintain, and repair today’s common tactical and law enforcement shotguns. Not a run-of-the-mill cleaning kit with generic tools, but a set of carefully selected, high-quality armorer tools designed to perform specific tasks on Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. You’ll have the exact tool you need at your fingertips, without scrounging through a case full of tools for other guns or lugging around unnecessary weight. There’s a universal double-ended forend wrench for easy, non-slip removal of the forend nut without damage. Magazine tube pliers have adjustable, padded, curved jaw SPECS: Contains tools for working tactical/law enforcement models of Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. Contents – Magna-Tip® screwdriver handle with #210-5 and #270-5 slotted bits, 3⁄16″ Philips bit, and Magna-Tip choke tube wrench; 12-gauge shotgun foren
Easy-to-install magazine extender increases your 12-gauge shotgun’s capacity by up to four additional 2¾” shells. Perfect for military, law enforcement, or home defense use. Corrosion-resistant, stainless steel extension tube with machined aluminum mounting collar, high strength stainless steel spring, and anodized aluminum follower help ensure reliable feeding in the harshest salt water, marsh hunting, or tactical environment. Installs in minutes, no special tools required. Available in two, three, and four round models. Benelli M4 available in two round only. SPECS: Stainless steel extension tube with anodized aluminum mounting collar, matte black; stainless steel spring; anodized aluminum follower, red; plastic spring retainer, black; steel barrel support clamp with integral sling loop, black. M4 kit contains extension tube, spring, and follo
All-steel extension tubes attach directly to the end of the magazine tube and increase capacity by as much as five rounds. Extension cap is machined from solid steel and welded to seamless steel tubing for extra strength. Includes extended magazine spring. Barrel Magazine Clamp (BMC) – Clamps to the barrel and the extended mag tube. Stabilizes and supports the tube; includes built-in sling swivel stud. Benelli 3-round and Remington 5-round magazine extensions include barrel magazine clamp. Barrel clamp available separately for all other models. SPECS: Steel, blue, matte finish. 12 ga. only. Rounds (RDS) indicates number of rounds extension adds to factory magazine capacity model. BMC-R Clamp – Fits Benelli Nova/Super Nova/M4, Rem. 870, and Win. 1200/1300 Def. BMC-U Clamp – Fits Rem. 1100/11-87.
All-steel extension tubes attach directly to the end of the magazine tube and increase capacity by as much as five rounds. Extension cap is machined from solid steel and welded to seamless steel tubing for extra strength. Includes extended magazine spring. Barrel Magazine Clamp (BMC) – Clamps to the barrel and the extended mag tube. Stabilizes and supports the tube; includes built-in sling swivel stud. Benelli 3-round and Remington 5-round magazine extensions include barrel magazine clamp. Barrel clamp available separately for all other models. SPECS: Steel, blue, matte finish. 12 ga. only. Rounds (RDS) indicates number of rounds extension adds to factory magazine capacity model. BMC-R Clamp – Fits Benelli Nova/Super Nova/M4, Rem. 870, and Win. 1200/1300 Def. BMC-U Clamp – Fits Rem. 1100/11-87.
All-steel extension tubes attach directly to the end of the magazine tube and increase capacity by as much as five rounds. Extension cap is machined from solid steel and welded to seamless steel tubing for extra strength. Includes extended magazine spring. Barrel Magazine Clamp (BMC) – Clamps to the barrel and the extended mag tube. Stabilizes and supports the tube; includes built-in sling swivel stud. Benelli 3-round and Remington 5-round magazine extensions include barrel magazine clamp. Barrel clamp available separately for all other models. SPECS: Steel, blue, matte finish. 12 ga. only. Rounds (RDS) indicates number of rounds extension adds to factory magazine capacity model. BMC-R Clamp – Fits Benelli Nova/Super Nova/M4, Rem. 870, and Win. 1200/1300 Def. BMC-U Clamp – Fits Rem. 1100/11-87.
All-steel extension tubes attach directly to the end of the magazine tube and increase capacity by as much as five rounds. Extension cap is machined from solid steel and welded to seamless steel tubing for extra strength. Includes extended magazine spring. Barrel Magazine Clamp (BMC) – Clamps to the barrel and the extended mag tube. Stabilizes and supports the tube; includes built-in sling swivel stud. Benelli 3-round and Remington 5-round magazine extensions include barrel magazine clamp. Barrel clamp available separately for all other models. SPECS: Steel, blue, matte finish. 12 ga. only. Rounds (RDS) indicates number of rounds extension adds to factory magazine capacity model. BMC-R Clamp – Fits Benelli Nova/Super Nova/M4, Rem. 870, and Win. 1200/1300 Def. BMC-U Clamp – Fits Rem. 1100/11-87.
The SureFire 617LF replaces the original forend of your Benelli M1 Super 90 or M2 shotgun. It features a high-efficiency LED emitter that is virtually immune to failure since there’s no filament to burn out or break. Maximum output is 80 lumens, and it continues producing tactical-level lightâenough to temporarily overwhelm the night-adapted vision of an aggressorâfor over three hours pe…
Gunny profiles Operation Iraqi Freedom’s first Medal of Honor recipient. The ultimate hands-on survey of military technology and tactics.Hosted by real-life ?Gunny? R. Lee Ermey (Full Metal Jacket).Relive the first major battle of the Vietnam War….
Purchase includes free access to book updates online and a free trial membership in the publisher’s book club where you can select from more than a million books without charge. Chapters: Benelli M4 Super 90, Saiga-12, Winchester Model 1911, Browning Auto-5, Manville Gun, Remington 1100, Beretta Xtrema 2, Remington 11-48, Beretta Al391, Remington 11-87, Franchi Spas-15, Akdal Mka 1919, Benelli Raf…
This digital document is an article from American Gunsmith, published by Belvoir Media Group, LLC on January 1, 2009. The length of the article is 564 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.Citation DetailsTitle: Scoping the Benelli Nova shotgun…
I decided on getting a benelli for my new semi-auto but i dont know what kind to get. I was looking at the Benelli M2 Field with Comfro Tech in a 12 gauge, or Benelli Montefeltro 12 gauge or even the Benelli Super Black Eagle II Comfortech.
With the Benelli Super Black Eagle it says it shoots 3-1/2 inch shells, but i want either 2-3/4 or 3″. Can i get it in either of these
Im buying a sbe in less than a week I looked at it and loved and dont listen to anybody that says it wont relieble cycle 2& three quarters my dads best friend has 2 sbe all he shoots from them is 2 3/4 loads he said he shot over 4000 rds through it already and said he had one jam
Sportsman Hi-Speed Steel offers all the dependability and performance you would expect from Remington ammunition without breaking the bank. Sportsman Hi-Speed Steel?s sealed primer, high quality steel shot, and consistent muzzle velocities combine to provide reliability in adverse weather, while delivering exceptional pattern density and retained energy. An economical, high-speed steel load that is ideal for short-range high-volume shooting during early duck seasons, or over decoys. Sportsman Steel works equally as well in upland situations that require the use of non-toxic shotshells. A true value for the waterfowler. Made with quality U.S. components that have made Remington the steel shotshell leader. Features up to 1300 FPS for dependable knock-down power. Primer and mouth sealed to ensure maximum reliability. 25 rounds per box. Maximum dram equivalent.
Sportsman Hi-Speed Steel offers all the dependability and performance you would expect from Remington ammunition without breaking the bank. Sportsman Hi-Speed Steel?s sealed primer, high quality steel shot, and consistent muzzle velocities combine to provide reliability in adverse weather, while delivering exceptional pattern density and retained energy. An economical, high-speed steel load that is ideal for short-range high-volume shooting during early duck seasons, or over decoys. Sportsman Steel works equally as well in upland situations that require the use of non-toxic shotshells. 25 per box.
21″ barrel. Includes adjustable length of pull kit. Allows adjustment by up to 1″. Kit includes (2)1/4″ spacers, (1)1/2″ spacer and all installation screws. Single bead sights. Features smooth operating actions that reduce wear and provide quick follow up shots.
Creates a giant ramp that aligns the shell with the magazine tube for faster and easier reloading with either hand. Completely replaces the small, factory carrier release button. Made from durable stainless steel; very easy to install, only minor fitting required. SPECS: 17-4 stainless steel. 2-½” (6.3cm) long, ¾” (19mm) wide. Includes roll pins and installation instructions. Fits Rem. 1100,11-87, Sportsman 12 in 12 ga. only.
Available in both 12 and 20 gauge versions, the Model 11-87 Sportsman series offers the choice of 26 or 28 inch standard contour, vent rib Rem choke barrels with modified choke tube and single bead sight. The matte black metal finish and the durable, all weather synthetic stock and forend can handle the hard wear of days in the field. These value priced workhorses also include stock and magazine cap swivel studs for the easy addition of a shotgun sling.
Available in both 12 and 20 gauge versions, the Model 11-87 Sportsman series offers the choice of 26 or 28 inch standard contour, vent rib Rem choke barrels with modified choke tube and single bead sight. The matte black metal finish and the durable, all weather synthetic stock and forend can handle the hard wear of days in the field. These value priced workhorses also include stock and magazine cap swivel studs for the easy addition of a shotgun sling.
Available in both 12 and 20 gauge versions, the Model 11-87 Sportsman series offers the choice of 26 or 28 inch standard contour, vent rib Rem choke barrels with modified choke tube and single bead sight. The matte black metal finish and the durable, all weather synthetic stock and forend can handle the hard wear of days in the field. These value priced workhorses also include stock and magazine cap swivel studs for the easy addition of a shotgun sling.
Available in both 12 and 20 gauge versions, the Model 11-87 Sportsman series offers the choice of 26 or 28 inch standard contour, vent rib Rem choke barrels with modified choke tube and single bead sight. The matte black metal finish and the durable, all weather synthetic stock and forend can handle the hard wear of days in the field. These value priced workhorses also include stock and magazine cap swivel studs for the easy addition of a shotgun sling.
Available in both 12 and 20 gauge versions, the Model 11-87 Sportsman series offers the choice of 26 or 28 inch standard contour, vent rib Rem choke barrels with modified choke tube and single bead sight. The matte black metal finish and the durable, all weather synthetic stock and forend can handle the hard wear of days in the field. These value priced workhorses also include stock and magazine cap swivel studs for the easy addition of a shotgun sling.
Available in both 12 and 20 gauge versions, the Model 11-87 Sportsman series offers the choice of 26 or 28 inch standard contour, vent rib Rem choke barrels with modified choke tube and single bead sight. The matte black metal finish and the durable, all weather synthetic stock and forend can handle the hard wear of days in the field. These value priced workhorses also include stock and magazine cap swivel studs for the easy addition of a shotgun sling.
Available in both 12 and 20 gauge versions, the Model 11-87 Sportsman series offers the choice of 26 or 28 inch standard contour, vent rib Rem choke barrels with modified choke tube and single bead sight. The matte black metal finish and the durable, all weather synthetic stock and forend can handle the hard wear of days in the field. These value priced workhorses also include stock and magazine cap swivel studs for the easy addition of a shotgun sling.
Improves reliability and function; prevents unnecessary wear. Keeps dirt and debris from entering through the ejection port and obstructing the action. Quality replacement for Remington part that is no longer available. SPECS: Plastic, black. 740 fits Remington 740 and 742 only. 760 fits Remington 760 only.
Machined tool steel for an exact fit, hardened for extra strength and longer service life than the stamped, factory part. Precision ground hook ensures positive contact on cartridge rim for reliable extraction every time. Use as a replacement for broken 597 extractors or as an upgrade for long, trouble-free performance. Fits .22LR, .22 Magnum, and .17 HMR. SPECS: 01 tool steel, blued finish. Hardened to Rc 38-40. ½” (12.7mm) long, 15/64″ (5.9mm) high, 5/64″ (2mm) thick. Fits Remington 597 .22LR, .22 Mag, and .17 HMR.
With over 8 million Remington 58, 870, 878, 1100 and Savage/Stevens pump shotguns around, this is a “must have” bench tool. Fits in and around recesses to renew the staking dimples when installing shell latches on the 58, 870, 878 feed latches and interceptor latch on 1100’s, and to stake cartridge stop pivot screws on the Savage/Stevens. Properly hardened to take hammer impact for a lifetime. Instructions included. SPECS: 4140 steel. Matte blue finish. 2¼” (5.7cm) length x 2″ (5.1cm) high x 3/8″ (9.5mm) thick. 6 oz. (170.1g).
The Standard Catalog of Remington Firearms by Dan Shideler offers complete access to the identification, details, historical background, production and value data of over 290 years of Remington products. It features over 300 color photos taken by expert firearm photographer Paul Goodwin. It also features bonus production and serial number data and comes in a distinct hardcover edition of 288 pages.
Indispensable collection of tools includes everything you need to service Remington 700s. The kit includes hex wrenches for your scope mounts and rings, a torque wrench for the guard screws and there’s even a bench mat to protect the gun while you work on it. Plus, because of the amount of work the bolt assembly does, it requires frequent cleaning, disassembly, and service. Several of the tools give you a mechanical advantage to make that process simple. All of the tools carry our unconditional guarantee and will give you a lifetime of service. All items listed below are included in the Remington 700 Armorer’s Kit.
Fits inside face bolt recess to support back side of the extractor rivet while you peen the other end to lock a new extractor in place. Just like the one Remington uses with one “cut” added for better support when clamping in the vise. SPECS: Blued, tool steel, hardened to Rc 60-63. 2-¼” (5.7cm) high x 1-¾” (4.4cm) wide x ½” (12.7mm)thick.
Improves reliability and function; prevents unnecessary wear. Keeps dirt and debris from entering through the ejection port and obstructing the action. Quality replacement for Remington part that is no longer available. SPECS: Plastic, black. 740 fits Remington 740 and 742 only. 760 fits Remington 760 only.
Easy-to-install kit lets you convert a sporting Remington 870 shotgun to tactical/home-defense configuration with collapsible buttstock and extended magazine capacity. Drop-in replacement stock uses a spring-loaded recoil-absorption system to reduce felt recoil and muzzle rise. Ergonomic pistol grip with deep grasping grooves helps improve control and maneuverability for fast target acquisition and accurate follow-up shots. Five preset locking positions allow length-of-pull adjustment from 11¼" to 15¼". Includes 5/8" rubber recoil pad to further improve comfort and recoil protection. Machined steel magazine extender increases capacity by two rounds without gun SPECS: Buttstock – Molded polymer & aluminum, matte black. Magazine Extender – Steel, Parkerized, matte dark gray. Includes extended-length magazine spring and high-visibility, nylon follower. Sight Set – Steel, matte black finish. Fits Remington 870 with .860”-.885&rd
Don’t get caught short or let a broken shotgun ruin your hunt. Convenient, pre-packaged kits contain the parts most often required for emergency, field repairs. All parts are Remington, Mossberg and Winchester Factory, tagged with the Brownells stock number, and current factory parts number. Firing pin, firing pin spring, firing pin retaining pin, breech bolt buffer, bolt buffer, 12/16/20 gauge extractor, extractor plunger, extractor spring, barrel seal, front and rear trigger detent springs, operating handle. SPECS: Kits contain one each of parts listed unless noted.
Don’t get caught short or let a broken shotgun ruin your hunt. Convenient, pre-packaged kits contain the parts most often required for emergency, field repairs. All parts are Remington, Mossberg and Winchester Factory, tagged with the Brownells stock number, and current factory parts number. Firing pin, firing pin spring, firing pin retaining pin, 12/16/20 gauge extractor, extractor plunger, extractor spring, magazine spring retainer (old style), magazine spring retainer (new style), front and rear trigger detent springs. SPECS: Kits contain one each of parts listed unless noted.
False center tool provides the gunsmith with an accurate and convenient way to center and securely support a Remington 700 bolt body in the tailstock when performing accurizing work on a lathe. Threaded end of tool tightens into the bolt body when the shroud and firing pin assembly are removed. Milled flats allow you to “snug-up” the tool with a wrench. The right tool for the job when squaring-up bolt lugs, recutting the bolt face, or using the lathe for any bolt body blueprinting operation. Machined from hardened, high speed tool steel for years of reliable service. SPECS: HS steel, in-the-white. 1-7⁄8″ (4.8cm) long x ½” (1.3cm) diameter.
Clear, straight-grain walnut that’s 90% inletted and profiled for fast, easy installation. Exterior needs only final detailing and finish. Shotgun pattern buttstock without cheekpiece retains a traditional appearance for an original #1 or military conversion. Butt is flat; install a pad or inlet for a buttplate. Forend is same as original #1 sporter with 1″ octagon channel and Schnabel tip. Carved from the same blank as buttstock for correct grain match. Mounting holes are not drilled. SPECS: Walnut. Buttstock – 14½” (36.8cm) long. Forend – 10-7⁄8″(27.5cm) long. Fits original Remington and Scandinavian manufactured Rolling Blocks; will not fit Star and Italian-manufactured replicas.
Replaces the no-longer-available Remington factory part to keep older rifles shooting. A fast, economical, alternative to returning rifle to the factory for repair. Replacement requires no modification to bolt or rifle. Fits all variations of 700, 600, 600M, 660, 742, 760, 788, 40X and XP-100. Large fits calibers with .473″ (12.01mm) diameter case head, including .22-250, .243, .270, .308, .30-06, etc. Small fits calibers with .378″ (9.60mm) diameter case head, including .17 Rem., .222, .223, etc. SPECS: Steel. Includes extractor, (2) rivets, and instructions. Gunsmith installation required.
Don’t get caught short or let a broken shotgun ruin your hunt. Convenient, pre-packaged kits contain the parts most often required for emergency, field repairs. All parts are Remington, Mossberg and Winchester Factory, tagged with the Brownells stock number, current factory parts number and bagged individually. Firing pin, firing pin spring, firing pin retaining pin, bolt buffer, right-hand extractor, extractor plunger, extractor spring, operating handle, barrel seal, front and rear trigger plate pins. Fits 12 ga. only. SPECS: Kits contain one each of parts listed unless otherwise noted.
Minimum, necessary overall length will not overlap the receiver; eliminates the chance of a momentary jam caused by a sling, clothing or other material catching on the forend. Made from extra-strong, lightweight synthetic material with a textured finish for improved grip. Multi-fit design is configured to fit Remington 870, but includes front and rear adapters, and a forend nut wrench to fit a wide variety of other shotguns. SPECS: Forend- Synthetic, injection molded, black matte color. 6Minimum, necessary overall length will not overlap the receiver; eliminates the chance of a momentary jam caused by a sling, clothing or other material catching on the forend. Made from extra-strong, lightweight synthetic material with a textured finish for improved grip. Multi-fit design is configured to fit Remington 870, but includes front and rear adapters, and a forend nut wrench to fit a wide variety of other shotguns. SPECS: Forend- Synthetic, injection molded, black matte color. 6” (15 cm) long, 7 oz. (198g) wt. Fits 12 and 20 ga. Rem. 870, Mossberg 500/590/835, Win. 1200/1300, Norinco 98. Will not fit Maverick 88.
Powerful, rare-earth magnet attaches to the inside of gun cabinet or safe to hold handgun securely in any position – flat, upright, angled, suspended from top, or muzzle down – without clips, hooks, or clamps. The N52-grade neodymium-iron-boron core, one of the strongest industrial magnets available, is sealed in a durable, non-marring polymer shell to protect both gun and cabinet surfaces from nicks and scratches. Mounts vertically, horizontally, or even on the underside of a shelf. Shell is drilled to accept your screws for permanent anchoring. Use two or more Sportsman’s Magnets for long guns; also great for holding sheathed knives, tools, bayonets, swords, and other steel items. Neody SPECS: Nickel coated N52-grade neodymium-iron-boron magnet enclosed in a black polymer shell. 2¾” (7cm) long, 1¼” (3.8cm) wide, ½” (1.3cm) high. Supports up to 10 lbs.(4.5 kg).
Indispensable collection of tools includes everything you need to service Remington 700s. The kit includes hex wrenches for your scope mounts and rings, a torque wrench for the guard screws and there’s even a bench mat to protect the gun while you work on it. Plus, because of the amount of work the bolt assembly does, it requires frequent cleaning, disassembly, and service. Several of the tools give you a mechanical advantage to make that process simple. All of the tools carry our unconditional guarantee and will give you a lifetime of service. All items listed below are included in the Remington 700 Armorer’s Kit.
Indispensable collection of tools includes everything you need to service Remington 700s. The kit includes hex wrenches for your scope mounts and rings, a torque wrench for the guard screws and there’s even a bench mat to protect the gun while you work on it. Plus, because of the amount of work the bolt assembly does, it requires frequent cleaning, disassembly, and service. Several of the tools give you a mechanical advantage to make that process simple. All of the tools carry our unconditional guarantee and will give you a lifetime of service. All items listed below are included in the Remington 700 Armorer’s Kit.
Remington Pet Carrier. SAVE BIG! Rugged Carriers are sturdy, easy to clean and extremely safe for your pet. All-sides ventilation keeps the inside cool and comfortable, and heavy-duty connectors and spring-loaded door latch add peace of mind. Perfect for the car, but also airline approved. Virtually unbreakable, high-impact polymer; Reversible door; Almond-colored top repels sunlight, deters heat …
The Remington Extreme Track LED Headlamp lights up blood trails like magic! SAVE BIG! Track your clipped quarry with ease. No more fumbling with a handheld flashlight. Remington’s Extreme Track is the hands-free way to trail game. The front-facing, dual-lens illuminator picks out the evidence with crystal clarity, letting you close in and claim your prize. Don’t let that big buck be the next “one …
Remington Knives – Sportsman Series Peanut Pocket Knife with Black Delrin Handles: Model R-18033. 2 7/8″ closed. 440 stainless clip and pen blades. Black Delrin stag handles with nickel silver bolsters and inlay shield. Made in China….
i have a Remington gun safe. i can open it but i want to change combo.its electronic has SG on bottom of contr?
it has sportsman written across bottom and a single brass handle to turn
The lock maker is Sargant & Greenleaf. There should be a model number printed or stamped on the inside lock body. Go to the S&G website
http://www.sargentandgreenleaf.com/OPinstr.php
there are instructions there. Its a good lock too, BTW.
Rugged, machined aluminum rail mount clamps around 12 gauge shotgun magazine tube to provide rail space on three sides for secure mounting of tactical lights and laser aiming devices. Gets your light and/or laser where it belongs—up front—so it won’t be obstructed by your support hand or other gear. Gives your tactical or home-defense shotgun added versatility to maximize your readiness for meeting threats effectively in low-light conditions. Accepts both Picatinny and Weaver-style accessories. Requires less than 1½” of space ahead of forearm on 1″ O.D. factory magazine tube, or clamp onto aftermarket mag extension tube. Attaches with two steel machine screws; no permanent alterations requir SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 1.375” (cm) long. 1.2 oz. (g) weight.
Rigid, aluminum, tri-rail mount lets you attach picatinny accessories such as lights, lasers, and other tactical equipment to your shotgun. Installs on the magazine tube without modifications to the gun, and will hold up to three attachments. Low mounting point keeps lights and lasers in proper alignment with the shot pattern and prevents interference with iron sights. Secures with two 8⁄32″ clamping screws. Models for most popular brands of tactical shotguns. SPECS: 6061-T6 aluminum, matte black. 1-5⁄8″ (4.2cm) long. 1″ – Fits Winchester, Remington, and FN shotgun magazine tubes. 25mm – Fits Mossberg and Ithaca shotgun magazine tubes. 26mm – Fits Benelli and Franchi SPAZ shotgun magazine tubes.
Rigid, aluminum, tri-rail mount lets you attach picatinny accessories such as lights, lasers, and other tactical equipment to your shotgun. Installs on the magazine tube without modifications to the gun, and will hold up to three attachments. Low mounting point keeps lights and lasers in proper alignment with the shot pattern and prevents interference with iron sights. Secures with two 8⁄32″ clamping screws. Models for most popular brands of tactical shotguns. SPECS: 6061-T6 aluminum, matte black. 1-5⁄8″ (4.2cm) long. 1″ – Fits Winchester, Remington, and FN shotgun magazine tubes. 25mm – Fits Mossberg and Ithaca shotgun magazine tubes. 26mm – Fits Benelli and Franchi SPAZ shotgun magazine tubes.
Rigid, aluminum, tri-rail mount lets you attach picatinny accessories such as lights, lasers, and other tactical equipment to your shotgun. Installs on the magazine tube without modifications to the gun, and will hold up to three attachments. Low mounting point keeps lights and lasers in proper alignment with the shot pattern and prevents interference with iron sights. Secures with two 8⁄32″ clamping screws. Models for most popular brands of tactical shotguns. SPECS: 6061-T6 aluminum, matte black. 1-5⁄8″ (4.2cm) long. 1″ – Fits Winchester, Remington, and FN shotgun magazine tubes. 25mm – Fits Mossberg and Ithaca shotgun magazine tubes. 26mm – Fits Benelli and Franchi SPAZ shotgun magazine tubes.
Precision-machined accessory rail lets you mount optics, ghost-ring sights, lasers, lights, night vision gear, and other tactical accessories on your Mossberg 500/590. Cut to true MIL-STD 1913 Picatinny specs from 6061-T651 billet aluminum. Attaches to factory drilled and tapped receivers using the provided mounting screws. Low-profile design with integral sight channel allows use of front sight when optics/accessories are removed. Extends forward over barrel for maximum mounting flexibility. Skeletonized underside reduces weight without compromising rigidity or strength. Durable, MIL-A-8625 “F” Type III Class 2 hardcoat anodized finish for additional strength and superb wear-resistance. SPECS: Aluminum, matte black hardcoat anodized finish. Requires drilling and tapping on early model Mossberg 500. Safety Rail – 9-11⁄16″ (24.7cm) long, 13⁄16″ (2.1cm) wide, 3⁄8″ (9.2mm) tall. Standard Rail – 7¼” (18.4cm) long, 13/16″ wide, 3/8″ tall.
Picatinny rail designs increase your scope and accessory mounting options without gunsmithing or permanent alterations. Tri Rail (TR) design if maximum rail space for lights, lasers and other tactical accessories is required. Made from tough, extruded aluminum; attaches securely with easy-to-turn, steel thumbscrews with threaded steel studs. Accepts both Picatinny or Weaver-style accessories and rings and includes mounting recesses and screws for STANAG rings. Sight tunnel in carry handle version allows unobstructed use of the adjustable A2 factory sights. Flat top version raises line of sight by .750″ (19mm) for improved eye relief and more comfortable cheek weld with conventional or electr SPECS: Aluminum, matte black, anodized finish. Carry Handle Mount – 5¼” (13.3cm) long, 1¾” (4.4cm) wide. 4.5 oz. (128g) weight. Flat Top Mount – 6” (15.2cm) long, 1¾” (4.4cm) wide. 6.5 oz. (182g) weight.
Picatinny rail designs increase your scope and accessory mounting options without gunsmithing or permanent alterations. Tri Rail (TR) design if maximum rail space for lights, lasers and other tactical accessories is required. Made from tough, extruded aluminum; attaches securely with easy-to-turn, steel thumbscrews with threaded steel studs. Accepts both Picatinny or Weaver-style accessories and rings and includes mounting recesses and screws for STANAG rings. Sight tunnel in carry handle version allows unobstructed use of the adjustable A2 factory sights. Flat top version raises line of sight by .750″ (19mm) for improved eye relief and more comfortable cheek weld with conventional or electr SPECS: Aluminum, matte black, anodized finish. Carry Handle Mount – 5¼” (13.3cm) long, 1¾” (4.4cm) wide. 4.5 oz. (128g) weight. Flat Top Mount – 6” (15.2cm) long, 1¾” (4.4cm) wide. 6.5 oz. (182g) weight.
Ultra-strong, lightweight, slide assembly replaces your shotgun’s forend with three MIL-STD 1913 Picatinny rails positioned at 3, 6, and 9 o’clock for mounting tactical lights and other accessories. Nine, removable rubber rail covers let you expose the exact parts of the rail needed for accessory attachment, while covering the rest of the rails with a comfortable, no-slip gripping surface that protects your hand when shooting and cycling rounds. Models available for Remington 870 and Mossberg 500/590. SPECS: Extruded aluminum, matte black. Rubber rail covers, black. Rem 870 – 6¼” (15.9cm) long. Moss 500/590 – 7¾” (19.7cm) long. Fits guns with 6¾” long factory forend; will not fit guns with forend metal for 7¾” factory forend.
Precision-machined accessory rail lets you mount optics, ghost-ring sights, lasers, lights, night vision gear, and other tactical accessories on your Mossberg 500/590. Cut to true MIL-STD 1913 Picatinny specs from 6061-T651 billet aluminum. Attaches to factory drilled and tapped receivers using the provided mounting screws. Low-profile design with integral sight channel allows use of front sight when optics/accessories are removed. Extends forward over barrel for maximum mounting flexibility. Skeletonized underside reduces weight without compromising rigidity or strength. Durable, MIL-A-8625 “F” Type III Class 2 hardcoat anodized finish for additional strength and superb wear-resistance. SPECS: Aluminum, matte black hardcoat anodized finish. Requires drilling and tapping on early model Mossberg 500. Safety Rail – 9-11⁄16″ (24.7cm) long, 13⁄16″ (2.1cm) wide, 3⁄8″ (9.2mm) tall. Standard Rail – 7¼” (18.4cm) long, 13/16″ wide, 3/8″ tall.
Add three, forward-mounted accessory rails and a multi-position, quick-detach sling swivel to your AR-15/M16 without permanent alterations to your rifle. Clamps securely around existing front sight housings with or without a bayonet lug. Push-button sling swivel can be repositioned quickly between six mounting holes, two per rail, for the ultimate in versatility. True, Picatinny cut allows mounting optics, lasers, lights, night vision gear, and a wide variety of other tactical accessories. Precision-machined from rugged, billet aluminum and hardcoat anodized for superior strength and wear resistance. SPECS: Aluminum, hardcoat anodized, matte black finish. 1-11⁄16″ (4.5cm) long, 2″ (5.2cm) wide, 2″ (5.2cm) high. Hardened-steel, Allen-head set screws included.
Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.
Machined steel sight bases combined with fiber optic rods in various lengths and colors for optimal sight contrast in most light conditions. Available in single or multiple base kits with extra light rods. Sightlink features a single front base that replaces factory bead sights with 6-48 tpi thread for easy installation. Models available with red, green, or amber light rod, plus an extra rod that can be trimmed to desired length for maximum light gathering. Sightlink Gunsmith Kit includes four each: red, green, and amber front sights, plus one extra red, green, and amber rod 2″ long. Sightlink Armorers Kit includes twelve front sight bases with one each: red, green, and SPECS: Base – Steel, matte black. .25” (6.3mm) long x .14” (3.5mm) diameter, 6-48 tpi thread. Rods – Polymer, red, green, or amber. .08” (2mm) diameter. Mutiple base sights require drilling & tapping.
During competition or a tactical situation, you can’t afford to lose time fumbling to position your hand on the forearm, or, worse yet, have it slide off when racking a pump action shotgun. These ergonomically shaped handstops attach to a Picatinny rail forend to provide precise, tactile indexing of the support hand, so you keep your eyes on the target while mounting the weapon. Helps keep hand in position during recoil, too, for fast follow-up shots. Molded-polymer Snap-On stop snaps securely into a single rail slot. Rubber-coated SureStop protects the hand and resists snagging on other gear. Dual cross-bolts clamp the stop tightly to the rail for SPECS: Snap-On – Molded polymer, black. 1¼" (3.2cm) wide, ½" (1.2cm) thick. Sold in 2-Pak. SureStop – Synthetic-rubber coated molded polymer, black. Steel cross-bolts, oxide finish, matte black. 1¼" long x 1¼" w
Wrap-around sub-base puts the mounting screws into the receiver’s thicker sidewalls for rock-solid, no-fail scope mounting even on thin, semi-auto receivers. Drill and tap six, 6-48 holes, then cinch down the lightweight, aluminum, sub-base plate over the top radius. Aluminum top rail accepts all Weaver-style rings. #1 Mount – Fits Rem 870/1100/11-87/58/11-48 12 ga (2¾″), Ithaca 51, SKB 20 ga S&W 1000, Browning 2000, Franchi 20 ga. #1A Mount – Fits Rem 870/11-87 Super Mag 12 ga (3½”). #2 Mount – Fits Rem 870/1100 LT20, 11-87 20 ga. #4 Mount – Fits Browning BPS 12, 12 (3½”) ga, Browning Gold 10. #6 Mount – Browning A-5 12 ga, Browning A- SPECS: Aluminum, black anodized. Approx. 5″ (12.7cm) long. 2.3 oz. (64 g) approximate wt. Includes screws and instructions. Browning A5 model requires epoxy and screws for mounting.
Ultra-strong, lightweight, slide assembly replaces your shotgun’s forend with three MIL-STD 1913 Picatinny rails positioned at 3, 6, and 9 o’clock for mounting tactical lights and other accessories. Nine, removable rubber rail covers let you expose the exact parts of the rail needed for accessory attachment, while covering the rest of the rails with a comfortable, no-slip gripping surface that protects your hand when shooting and cycling rounds. Models available for Remington 870 and Mossberg 500/590. SPECS: Extruded aluminum, matte black. Rubber rail covers, black. Rem 870 – 6¼” (15.9cm) long. Moss 500/590 – 7¾” (19.7cm) long. Fits guns with 6¾” long factory forend; will not fit guns with forend metal for 7¾” factory forend.
Attaches to the barrel and positions the scope back, over the receiver. Steel base solders to non-ribbed shotgun barrels only. Use Hi-Force 44™ Solder. MTF (machine-to-fit) Base – Hole spacing is drilled but barrel radius is left blank for custom fit applications. SPECS: Base – steel, blued. Rail – aluminum, black finish. 5-¾” (12cm) long, 3.8 oz. (109g) wt. Mossberg 500 also fits M9200 and M5500. Ithaca 37/87 fits Deerslayer only, attaches to quarter rib. Includes instructions.
Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket buttstock and pistol grip, A1 adds a fixed postion, A-1 buttstock and standard AR-15 pistol grip, M4 includes collapible stock and pistol grip. SPECS: Conversion Unit – Aluminum, anodized, black, matte finish. Approximately 3.7″ (9.4cm) high, 3.4″ (8.6cm) long, 1″ (2.54cm) thick. Rail – Aluminum, anodized, black, matte finish. 7″ (17.8cm) long, .64″ (16.2mm) wide, .64″ high. A1 Stock – 14¼” (36.2cm) L.O.P. M4 St
Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket buttstock and pistol grip, A1 adds a fixed postion, A-1 buttstock and standard AR-15 pistol grip, M4 includes collapible stock and pistol grip. SPECS: Conversion Unit – Aluminum, anodized, black, matte finish. Approximately 3.7″ (9.4cm) high, 3.4″ (8.6cm) long, 1″ (2.54cm) thick. Rail – Aluminum, anodized, black, matte finish. 7″ (17.8cm) long, .64″ (16.2mm) wide, .64″ high. A1 Stock – 14¼” (36.2cm) L.O.P. M4 St
Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket buttstock and pistol grip, A1 adds a fixed postion, A-1 buttstock and standard AR-15 pistol grip, M4 includes collapible stock and pistol grip. SPECS: Conversion Unit – Aluminum, anodized, black, matte finish. Approximately 3.7″ (9.4cm) high, 3.4″ (8.6cm) long, 1″ (2.54cm) thick. Rail – Aluminum, anodized, black, matte finish. 7″ (17.8cm) long, .64″ (16.2mm) wide, .64″ high. A1 Stock – 14¼” (36.2cm) L.O.P. M4 St
Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket buttstock and pistol grip, A1 adds a fixed postion, A-1 buttstock and standard AR-15 pistol grip, M4 includes collapible stock and pistol grip. SPECS: Conversion Unit – Aluminum, anodized, black, matte finish. Approximately 3.7″ (9.4cm) high, 3.4″ (8.6cm) long, 1″ (2.54cm) thick. Rail – Aluminum, anodized, black, matte finish. 7″ (17.8cm) long, .64″ (16.2mm) wide, .64″ high. A1 Stock – 14¼” (36.2cm) L.O.P. M4 St
Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket buttstock and pistol grip, A1 adds a fixed postion, A-1 buttstock and standard AR-15 pistol grip, M4 includes collapible stock and pistol grip. SPECS: Conversion Unit – Aluminum, anodized, black, matte finish. Approximately 3.7″ (9.4cm) high, 3.4″ (8.6cm) long, 1″ (2.54cm) thick. Rail – Aluminum, anodized, black, matte finish. 7″ (17.8cm) long, .64″ (16.2mm) wide, .64″ high. A1 Stock – 14¼” (36.2cm) L.O.P. M4 St
During competition or a tactical situation, you can’t afford to lose time fumbling to position your hand on the forearm, or, worse yet, have it slide off when racking a pump action shotgun. These ergonomically shaped handstops attach to a Picatinny rail forend to provide precise, tactile indexing of the support hand, so you keep your eyes on the target while mounting the weapon. Helps keep hand in position during recoil, too, for fast follow-up shots. Molded-polymer Snap-On stop snaps securely into a single rail slot. Rubber-coated SureStop protects the hand and resists snagging on other gear. Dual cross-bolts clamp the stop tightly to the rail for SPECS: Snap-On – Molded polymer, black. 1¼" (3.2cm) wide, ½" (1.2cm) thick. Sold in 2-Pak. SureStop – Synthetic-rubber coated molded polymer, black. Steel cross-bolts, oxide finish, matte black. 1¼" long x 1¼" w
Extended, MIL-STD 1913 Picatinny side rails give 10″ of uninterrupted rail space and top rail extension past front sight provides flexibility in accessory mounting options. Laser-etched with alphanumeric designations. Bottom section is removable to allow installation of grenade launcher or shotgun. SPECS: CNC machined from 6061 aluminum, hardcoat anodized, matte black. 6-5⁄8″ (16.8cm) long, 2½” (6.35cm) diameter. Top and side rails are 10″ (25.4cm) long. Fits carbine length, Mil-Spec barrels. Will not fit Colt-made AR-15s/M4s.
Attaches to the barrel and positions the scope back, over the receiver. Steel base solders to non-ribbed shotgun barrels only. Use Hi-Force 44™ Solder. MTF (machine-to-fit) Base – Hole spacing is drilled but barrel radius is left blank for custom fit applications. SPECS: Base – steel, blued. Rail – aluminum, black finish. 5-¾” (12cm) long, 3.8 oz. (109g) wt. Mossberg 500 also fits M9200 and M5500. Ithaca 37/87 fits Deerslayer only, attaches to quarter rib. Includes instructions.
Attaches to the barrel and positions the scope back, over the receiver. Steel base solders to non-ribbed shotgun barrels only. Use Hi-Force 44™ Solder. MTF (machine-to-fit) Base – Hole spacing is drilled but barrel radius is left blank for custom fit applications. SPECS: Base – steel, blued. Rail – aluminum, black finish. 5-¾” (12cm) long, 3.8 oz. (109g) wt. Mossberg 500 also fits M9200 and M5500. Ithaca 37/87 fits Deerslayer only, attaches to quarter rib. Includes instructions.
Attaches to the barrel and positions the scope back, over the receiver. Steel base solders to non-ribbed shotgun barrels only. Use Hi-Force 44™ Solder. MTF (machine-to-fit) Base – Hole spacing is drilled but barrel radius is left blank for custom fit applications. SPECS: Base – steel, blued. Rail – aluminum, black finish. 5-¾” (12cm) long, 3.8 oz. (109g) wt. Mossberg 500 also fits M9200 and M5500. Ithaca 37/87 fits Deerslayer only, attaches to quarter rib. Includes instructions.
Wrap-around sub-base puts the mounting screws into the receiver’s thicker sidewalls for rock-solid, no-fail scope mounting even on thin, semi-auto receivers. Drill and tap six, 6-48 holes, then cinch down the lightweight, aluminum, sub-base plate over the top radius. Aluminum top rail accepts all Weaver-style rings. #1 Mount – Fits Rem 870/1100/11-87/58/11-48 12 ga (2¾″), Ithaca 51, SKB 20 ga S&W 1000, Browning 2000, Franchi 20 ga. #1A Mount – Fits Rem 870/11-87 Super Mag 12 ga (3½”). #2 Mount – Fits Rem 870/1100 LT20, 11-87 20 ga. #4 Mount – Fits Browning BPS 12, 12 (3½”) ga, Browning Gold 10. #6 Mount – Browning A-5 12 ga, Browning A- SPECS: Aluminum, black anodized. Approx. 5″ (12.7cm) long. 2.3 oz. (64 g) approximate wt. Includes screws and instructions. Browning A5 model requires epoxy and screws for mounting.
Compact, lightweight laser sight projects a bright, highly visible beam on the target for precise shot placement. Mounts in seconds on any pistol, rifle, or shotgun with 1¾” or more of Picatinny or Weaver-style rail space. Ambidextrous switch is comfortably positioned for quick engagement when pistol shooter’s index finger rests along the slide in the Universal Cover Mode. Beam may be set to constant output or rapidly pulsating mode for even greater visibility. Low-profile housing allows many guns fitted with the Uni-Max to be carried in standard holsters. Integral Picatinny rail on underside of housing allows mounting of tactical weapon light. Windage and elevation adjust easily with the in SPECS: Fiber reinforced nylon, black. 2¼” (5.7cm) long, 1” (2.5cm) wide, ¾” (1.9cm) high. Beam Diameter – 5/16” (1.6cm) at 7 yards, ¾” (1.9cm) at 25 yards. Uni-Max Red – 635 nm wavelength laser. .9 oz. (26g) weight. Includes (2) 357 batteries and (2) Allen wrenches. Uni-Green – 532
Wrap-around sub-base puts the mounting screws into the receiver’s thicker sidewalls for rock-solid, no-fail scope mounting even on thin, semi-auto receivers. Drill and tap six, 6-48 holes, then cinch down the lightweight, aluminum, sub-base plate over the top radius. Aluminum top rail accepts all Weaver-style rings. #1 Mount – Fits Rem 870/1100/11-87/58/11-48 12 ga (2¾″), Ithaca 51, SKB 20 ga S&W 1000, Browning 2000, Franchi 20 ga. #1A Mount – Fits Rem 870/11-87 Super Mag 12 ga (3½”). #2 Mount – Fits Rem 870/1100 LT20, 11-87 20 ga. #4 Mount – Fits Browning BPS 12, 12 (3½”) ga, Browning Gold 10. #6 Mount – Browning A-5 12 ga, Browning A- SPECS: Aluminum, black anodized. Approx. 5″ (12.7cm) long. 2.3 oz. (64 g) approximate wt. Includes screws and instructions. Browning A5 model requires epoxy and screws for mounting.
Wrap-around sub-base puts the mounting screws into the receiver’s thicker sidewalls for rock-solid, no-fail scope mounting even on thin, semi-auto receivers. Drill and tap six, 6-48 holes, then cinch down the lightweight, aluminum, sub-base plate over the top radius. Aluminum top rail accepts all Weaver-style rings. #1 Mount – Fits Rem 870/1100/11-87/58/11-48 12 ga (2¾″), Ithaca 51, SKB 20 ga S&W 1000, Browning 2000, Franchi 20 ga. #1A Mount – Fits Rem 870/11-87 Super Mag 12 ga (3½”). #2 Mount – Fits Rem 870/1100 LT20, 11-87 20 ga. #4 Mount – Fits Browning BPS 12, 12 (3½”) ga, Browning Gold 10. #6 Mount – Browning A-5 12 ga, Browning A- SPECS: Aluminum, black anodized. Approx. 5″ (12.7cm) long. 2.3 oz. (64 g) approximate wt. Includes screws and instructions. Browning A5 model requires epoxy and screws for mounting.
The A.R.M.S. #17 Single Lever Tri-Lock Mount was manufactured as the ideal mount for small pocket scopes, flashlights, and various laser attachments. It offers an ultra-low design to maintain a compact profile. It features 2 solid attachment feet on the right side which are firmly held in place with a steel locking foot and lever on the left side. A standard STANAG width channel allows secure laser or N.V. optic attachment. It also offers a Repeat Zero hold with an easy on/off design. Specs: Tri-lock mount, Finish: non-reflective black, Low profile design
Safely removes even stubborn spring retainers. Threads into popular pump and semi-auto shotgun magazine spring retainers – puts an end to “flying” springs and bent retainers. SPECS: Approximately 3″ (7.62cm) long, blued, case-hardened steel. Retainer hole must be ¼” (6.35mm) minimum.
Lightweight, aluminum gauge measures length of pull, drop at comb and heel, and angle of pitch to give a precise fit. Units of measurement are in bold, easy-to-read numbers in both inches and metric for world-wide use. Measures length of pull to 24″ and has an overall length of 29.5″. With a length of 28”, you can accurately measure drop. Optional 23″ Magnetic Extension “glues” the Shotgun Combo Gauge to the rib or barrel using a magnet for hands-free operation. Extension adds 20″ to steady the tool for easy drop measurement. Plastic protractor measures 180 degrees of pitch. SPECS: Shotgun Combo Gauge – Aluminum. Overall length 28″ (71cm) Magnetic Extension – Aluminum. Overall length 23″ (58.5cm).
Brownells Shotgun Sight Kit “A” is truly one of the most unusual bargains ever offered a Sporting Goods Store or Professional Gunsmith in a practical, economical assortment of top-quality, replacement shotgun sights. The workmanship is superb, being done on the most modern and up-to-date machinery in the U.S.A. The sight globes are true spheres – not lop-sided as those you have found on many other sights at a higher price. The threads are cut onto the shank, and are clean, sharp and well-machined for the best possible fit. Shanks are threaded right up to the base of the bead so you can set the sight exactly onto the barrel.Your choice of sights in the Kit SPECS: Brass and Aluminum Beads in 3½” (8.9cm) x 7″ (17.8cm) clear plastic box.
Add the versatility of a one -piece Picatinny scope rail to your rifle or shotgun without drilling or tapping. Precision CNC machined from lightweight, extruded 6061 T6 aluminum stock with MIL-STD 1913 Picatinny spec slot-and-rail spacing that allows fast and simple adjustment of eye relief, plus greater flexibility in scope choice. Drilled to fit the factory hole spacing. Accepts Picatinny or Weaver scope rings. Includes the correct factory specification socket head Allen screws and hex wrench. SPECS: 6061 T6 aluminum, anodized, matte black finish. Short action (S/A) and long action (L/A) models available for some rifles. Browning A-Bolt S/A – 6-1⁄8” (15.6cm) long. Browning A-Bolt L/A – 6-15⁄16” (17.6cm) long. Moss. 500/590/835 – 5¾” (14.6
Face-off shotgun barrels exactly square to the bore. Ideal when repairing dings, or before installing screw-in chokes. Smooth cutting, seven-flute cutter. Turn with hand drill or drill press. SPECS: H.S. steel. 3-¾” (9.5cm) long. 1-5/16″ (24mm) dia. 3/8″ (9.5) dia. shank. Pilot NOT included, order below.
UTG New Generation tactical Xenon Flashlight. Includes pressure remote switch tactical flashlight ring and two 3 volt lithium batteries. Includes 3 mounting rails each with 3 slots. Tactical laser sight for pistol or rifle. Fits most guns with a weaver….
LaserLyte Shotgun Tri Rail Mount, Set up your tactical or home defense shotgun for maximum versatility and low light performance with this new Tri-Rail Mounting System. Lightweight and durable, this system positions three Picatinny rails at the front end of the shotgun where flashlights and/or lasers are best located. Easily mounted on the magazine tube of most popular 12-gauge pump action shotgun…
Burris 410389 Mounts, Rings, Bases – Rifle Scopes & Sights — OpticSale now offers the latest from Burris bringing you the Burris Shotcam Shotgun Tri-Rail Mount for Magazine Tube Extentions . Featuring the finest optics made by Burris. Learn more about the specifications and details about the Burris Shotcam Shotgun Tri-Rail Mount for Magazine Tube Extentions by giving our sales reps a shout via ph…
