Advanced dual-mode sighting system gives the operator the choice of a holographic red dot sight or a powerful laser sight to address almost any tactical situation. Combines the fast acquisition, heads-up versatility, and long-range capabilities of an EOTech Model 552 holographic sight with the precision of a powerful 635nm/5mW red laser sight in one compact, flattop-mounted unit. Systems may be operated independently and are separately adjustable for windage and elevation. Laser has two output settings and draws power from the 552’s battery pack; two, included 1.5 volt AA batteries give five hours of continuous laser operation. Eye-safe low-power setting is for force-on-force training and CQ SPECS: Housing/Hood – 6061 T6 aluminum, anodized, matte black. Polycarbonate battery compartment. 5½” (14cm) long, 2-7⁄8″ (7.3cm) wide, 23⁄8″ (6cm) high. 15.8 oz. (448g) weight. Lens – 3⁄16″ thick, 3-layer, shatterproof laminate glass. Reticle size: 1 MOA dot and 65 MOA ring. L
The Optimizer is accurate to ?1 yard at 20?80 yards Calibrated to precise arrow speed Optimizer Speed Dial Sighting System comes with a SoloX 30/30 single-hair 3×32 scope No more range guessing?the Optimizer is accurate to ?1 yard at 20?80 yards, calibrated to precise arrow speed. The Optimizer Speed Dial Sighting System comes with a SoloX 30/30 single-hair 3×32 scope. Color: Black. Manufacturer model #: SD-3030.
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
Minimal-profile laser sighting systems use an integral mount that clamps securely to any standard pistol frame accessory rail system. Despite their tiny size, these lasers project a powerful Class IIIa, 5mW, 650nm red beam up to 1,500 feet at night, with a 1½ hour continuous laser run time. Precision-ground glass lens minimizes scatter to help maintain a crisp, focused beam even when illuminating targets at maximum range. Quick-detach mounting system clamps to frame rail with a captive, full-length locking bar and cross-bolt. Cross-bolt’s grooved head allows tightening with finger pressure only; for additional security, apply more tightening force easily with a dime or penny. SPECS: 6061 T6 aluminum, anodized, matte black finish. Universal – 1-5⁄8" (4.1cm) long, 1” (2.5cm) wide, extends approximately ¾” (1.9cm) below rail. 1.1 oz. (31.2g) with two G-13 batteries (included) installed. Subcompact –
Minimal-profile laser sighting systems use an integral mount that clamps securely to any standard pistol frame accessory rail system. Despite their tiny size, these lasers project a powerful Class IIIa, 5mW, 650nm red beam up to 1,500 feet at night, with a 1½ hour continuous laser run time. Precision-ground glass lens minimizes scatter to help maintain a crisp, focused beam even when illuminating targets at maximum range. Quick-detach mounting system clamps to frame rail with a captive, full-length locking bar and cross-bolt. Cross-bolt’s grooved head allows tightening with finger pressure only; for additional security, apply more tightening force easily with a dime or penny. SPECS: 6061 T6 aluminum, anodized, matte black finish. Universal – 1-5⁄8" (4.1cm) long, 1” (2.5cm) wide, extends approximately ¾” (1.9cm) below rail. 1.1 oz. (31.2g) with two G-13 batteries (included) installed. Subcompact –
Compact, self-contained boresighting system projects a bright red laser beam aligned with the bore axis for sighting scopes, holographic red dot sights, and “iron” sights to the point-of-aim without firing a shot. A powerful magnet holds the sighter securely on the muzzle of any rifle, pistol, or shotgun; nothing to insert into bore or chamber. Install the three batteries (included) into the battery compartment, use the centering guides on the rear of the boresighter to center it on the muzzle, and switch on. Aim at a target 20-30 yards away, and adjust windage and elevation of the scope or sights so point-of-aim is zeroed on the dot. Go to the range for test shots and final sight adjustment SPECS: High-impact polycarbonate, black. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (3) AG13 button cell batteries, nylon carrying case, and instructions.
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m
A great tool for sighting or cleaning your guns, the Parallax Cleaning and Sighting Rest helps you get the most out of your hunting rifles! The Cleaning and Sighting Vise is the perfect accessory for quickly and accurately sighting in any long gun with a scope. Everything that makes this rest a great sighting vise also makes its the perfect cleaning accessory. Both midpoint and forward rests adjust to handle any length rifle. Rear vise, midpoint and forward rests and Velcro straps lock in gun securely. Welded steel construction for durability. Comes with handy utility tray. Rest offers four point leveling to give you a level shooting platform. Features: Works as a shooting rest or gun cleaning platform Durable welded steel construction Midpoint and forward rests adjust to accommodate any length rifle Rear vise, midpoint and forward rests and velcro straps lock gun in Utility tray included Four point leveling adjustment
The Optimizer is accurate to ?1 yard at 20?80 yards Calibrated to precise arrow speed Mounts any scope with 1” Weaver -style rings No more range guessing?the Optimizer is accurate to ?1 yard at 20?80 yards, calibrated to precise arrow speed. The Optimizer Speed Dial Sighting System Mount mounts any scope with 1” Weaver -style rings. Color: Black. Manufacturer model #: OL-SD.
The Otis Optics Cleaning System contains everything you need to effectively care for the functionality of scopes, rangefinders, laser sighting devices, binoculars, cameras, and eyewear. This kit includes Premium Anti-Fog Lens Cleaner, Premium Lens Tissues, cotton swabs, an Otis Micro Fiber Lens Cloth, and a Mohair Lens Brush. All components are neatly packed in a nylon softpack storage case for easy transport and can be interchanged with other Otis cleaning systems. SPECS: For Use On: binoculars, rangefinders, scopes, flashlights, lenses, cameras, eyewear, etc. Weight: 0.310 lbs., dimensions: 4 x 4 x 2 inches.
Integral, grip-mounted laser sighting system gives you an immediate, decisive advantage in almost any light conditions—low light, darkness, even broad daylight. A squeeze of your finger on the instinctively positioned pressure pad activates the laser for an added tactical edge by instantly projecting a bright red aiming dot on the target. Makes a great training tool by providing instant feedback to advanced shooting students learning instinctive aiming, and helps beginners learn how to achieve proper sight alignment, steady trigger pull, and consistent follow through. Ultra-bright laser is the brightest allowed by current federal law; dot diameter is approximately ½” at 50 feet. The ergonomi SPECS: 633nm Class IIIa red laser, 5 mW peak output. Includes batteries, Allen wrenches, mounting hardware, and instructions. Vertical Foregrip – Aluminum frame, anodized, and molded rubber, black. Fits Picatinny and Weaver-style rails. Pistol Grip/Upper Receiver – Polymer frame, mo
Integral, grip-mounted laser sighting system gives you an immediate, decisive advantage in almost any light conditions—low light, darkness, even broad daylight. A squeeze of your finger on the instinctively positioned pressure pad activates the laser for an added tactical edge by instantly projecting a bright red aiming dot on the target. Makes a great training tool by providing instant feedback to advanced shooting students learning instinctive aiming, and helps beginners learn how to achieve proper sight alignment, steady trigger pull, and consistent follow through. Ultra-bright laser is the brightest allowed by current federal law; dot diameter is approximately ½” at 50 feet. The ergonomi SPECS: 633nm Class IIIa red laser, 5 mW peak output. Includes batteries, Allen wrenches, mounting hardware, and instructions. Vertical Foregrip – Aluminum frame, anodized, and molded rubber, black. Fits Picatinny and Weaver-style rails. Pistol Grip/Upper Receiver – Polymer frame, mo
Ultra-compact laser sight delivers an extremely bright, red, pinpoint beam of light for fast, accurate sighting without weighing down your weapon or negatively affecting its balance and performance. Lightweight, cylindrical housing guards high-output laser module from shock and recoil; four set screws provide flexible adjustment of laser beam. Universal, aluminum mount allows solid attachment to a wide variety of mounting platforms, including handguard rails and pistol frames with integral rail. Includes momentary pressure switch with 6″ coil cord and interchangeable, two-position slide switch for pistol applications. SPECS: Aluminum, matte black finish. Laser – 2-3⁄16″ (5.6cm) long x 9⁄16″ (1.4cm) diameter. Mount – 1-3⁄8″ (3.5cm) long, 1″ (2.5cm) wide, 1¼” (3.2cm) high. 2.3 oz. (65 g) wt. Includes hook & loop tape, Allen wrench, interchangeable switches.
Saves range time and ammo; highly accurate laser system lets you zero your scope to point-of-aim at 100 yards, before you go to the range. Quick and easy to use, just place the special laser target 25 feet away and aim the laser at it, then adjust the scope till the crosshairs align with the target. Works equally well with red dot scopes and iron sights. Laser is mounted to a cone shaped, aluminum spud. An O-ring and a powerful magnet hold the spud centered in the bore. No special adapters to buy and no metal contacts the rifling. A system of adapters and O-rings lets one unit fit all firearms from .22 to .50 caliber, plus 12 and 20 gauge shotguns. Also includes the SRL-100 adapter that slip SPECS: Aluminum. Includes (2) adapters, (12) O-rings, (2) cardboard target cards, SRL-100 adapter, instructions, and plastic storage case. SL‑100 – 6-1⁄8” (15.6cm) OAL without adapter, 4-1⁄8” (10.5cm) long spud. Uses (2) #357/ LR-44 batteries, included. SL-150 – 6
33mm electronic sight, with four reticles and eleven, brightness levels, gives you the adjustment options you need for optimum sighting on any target. Large, light-gathering, aircraft-grade, aluminum tube is double thick to protect against magnum-power recoil; won’t bend or crush when you tighten down the rings. Four reticles: crosshair dot; 4-minute dot; 8-minute dot in a 75-minute circle; and a 2-minute dot in a dual, 4-quadrant reticle. Nitrogen-filled lenses are fog, recoil, and waterproof. Includes polarizing, filter attachment to build contrast and give easy target recognition. Comes with front and rear extensions for glare reduction and (2) Weaver-style rings for e SPECS: 6061 aircraft-grade aluminum, anodized, black or stainless silver matte finish. Tube – 33 mm (1-19/64″) O.D., 5-3/8″ (14cm) OAL. Rings – Approximately 1-19/64″ (33mm) I.D., 15/64″ (6mm) high from top of base to bottom of ring. Extensions – 33 mm (1-19/64″). 1-1
33mm electronic sight, with four reticles and eleven, brightness levels, gives you the adjustment options you need for optimum sighting on any target. Large, light-gathering, aircraft-grade, aluminum tube is double thick to protect against magnum-power recoil; won’t bend or crush when you tighten down the rings. Four reticles: crosshair dot; 4-minute dot; 8-minute dot in a 75-minute circle; and a 2-minute dot in a dual, 4-quadrant reticle. Nitrogen-filled lenses are fog, recoil, and waterproof. Includes polarizing, filter attachment to build contrast and give easy target recognition. Comes with front and rear extensions for glare reduction and (2) Weaver-style rings for e SPECS: 6061 aircraft-grade aluminum, anodized, black or stainless silver matte finish. Tube – 33 mm (1-19/64″) O.D., 5-3/8″ (14cm) OAL. Rings – Approximately 1-19/64″ (33mm) I.D., 15/64″ (6mm) high from top of base to bottom of ring. Extensions – 33 mm (1-19/64″). 1-1
Saves range time and ammo; highly accurate laser system lets you zero your scope to point-of-aim at 100 yards, before you go to the range. Quick and easy to use, just place the special laser target 25 feet away and aim the laser at it, then adjust the scope till the crosshairs align with the target. Works equally well with red dot scopes and iron sights. Laser is mounted to a cone shaped, aluminum spud. An O-ring and a powerful magnet hold the spud centered in the bore. No special adapters to buy and no metal contacts the rifling. A system of adapters and O-rings lets one unit fit all firearms from .22 to .50 caliber, plus 12 and 20 gauge shotguns. Also includes the SRL-100 adapter that slip SPECS: Aluminum. Includes (2) adapters, (12) O-rings, (2) cardboard target cards, SRL-100 adapter, instructions, and plastic storage case. SL‑100 – 6-1⁄8” (15.6cm) OAL without adapter, 4-1⁄8” (10.5cm) long spud. Uses (2) #357/ LR-44 batteries, included. SL-150 – 6
Saves range time and ammo; highly accurate laser system lets you zero your scope to point-of-aim at 100 yards, before you go to the range. Quick and easy to use, just place the special laser target 25 feet away and aim the laser at it, then adjust the scope till the crosshairs align with the target. Works equally well with red dot scopes and iron sights. Laser is mounted to a cone shaped, aluminum spud. An O-ring and a powerful magnet hold the spud centered in the bore. No special adapters to buy and no metal contacts the rifling. A system of adapters and O-rings lets one unit fit all firearms from .22 to .50 caliber, plus 12 and 20 gauge shotguns. Also includes the SRL-100 adapter that slip SPECS: Aluminum. Includes (2) adapters, (12) O-rings, (2) cardboard target cards, SRL-100 adapter, instructions, and plastic storage case. SL‑100 – 6-1⁄8” (15.6cm) OAL without adapter, 4-1⁄8” (10.5cm) long spud. Uses (2) #357/ LR-44 batteries, included. SL-150 – 6
The Otis Lens Cleaning Kit contains everything you need to clean and properly care for scopes, rangefinders, laser sighting devices, binoculars, cameras, and eyewear. It comes complete with a premium anti-fog lens cleaner, premium lens tissues, anti-fog lens swabs, an Otis micro fiber lens cloth, and a mohair lens brush. Easily add these components to any of the Otis Cleaning kits to create a top of the line cleaning system.
Expands the TLR-1 system with a more powerful 135-lumen LED lamp and a high visibility, red 650-660 nm aiming laser to aid in precise shot placement. Selector switch lets you choose light only, laser only, or light plus laser illumination. Ambidextrous, momentary-on/constant-on/off switch lets you apply your selection exactly when you need it. Advanced C4 LED technology uses a powerful, shock-resistant LED and a proprietary parabolic reflector to generate an intense, uniform beam free of hot spots or shadows, with excellent peripheral illumination. Runs on two CR123 lithium batteries for 2.5 hours continuous runtime for light, 45+ hours in laser-only mode. Solid-state current regulation syst SPECS: Machined aluminum, matte black anodized finish. 135 lumens. 3¼” (8.3cm) long, 1½” (3.8cm) wide, 1¾” (4.5cm) high. 4.7 oz. (134g) weight, including batteries. LED service life: 50,000 hours. Uses two CR123 lithium batteries, included.
Spring-loaded sights deploy at the push of a button to provide instant backup sighting. Quick Deploy System locks securely and requires a firm, positive press of the button to deploy or retract the sight, so it won’t accidentally activate when bumped—these sights stay where you put them. Minimal profile when folded—only .435” high—with radiused edges and a smoothly curved front surface to prevent snagging on foliage, gear, or clothing. Crossbolt and side bar provide solid attachment to MIL-STD 1913 Picatinny or Weaver-style rail systems. All-aluminum construction is lightweight, yet plenty strong to handle the hard knocks of tactical operations, with a durabl SPECS: Aluminum, hardcoat anodized, matte black. All models 1” (2.5cm) deployed length, 1¼” (3.2cm) wide, .435” (11mm) folded height. Front Sight w/Ears – 2-1⁄8" (5.4cm) folded length, 1.420” (3.61cm) deployed height from top of
Spring-loaded sights deploy at the push of a button to provide instant backup sighting. Quick Deploy System locks securely and requires a firm, positive press of the button to deploy or retract the sight, so it won’t accidentally activate when bumped—these sights stay where you put them. Minimal profile when folded—only .435” high—with radiused edges and a smoothly curved front surface to prevent snagging on foliage, gear, or clothing. Crossbolt and side bar provide solid attachment to MIL-STD 1913 Picatinny or Weaver-style rail systems. All-aluminum construction is lightweight, yet plenty strong to handle the hard knocks of tactical operations, with a durabl SPECS: Aluminum, hardcoat anodized, matte black. All models 1” (2.5cm) deployed length, 1¼” (3.2cm) wide, .435” (11mm) folded height. Front Sight w/Ears – 2-1⁄8" (5.4cm) folded length, 1.420” (3.61cm) deployed height from top of
Spring-loaded sights deploy at the push of a button to provide instant backup sighting. Quick Deploy System locks securely and requires a firm, positive press of the button to deploy or retract the sight, so it won’t accidentally activate when bumped—these sights stay where you put them. Minimal profile when folded—only .435” high—with radiused edges and a smoothly curved front surface to prevent snagging on foliage, gear, or clothing. Crossbolt and side bar provide solid attachment to MIL-STD 1913 Picatinny or Weaver-style rail systems. All-aluminum construction is lightweight, yet plenty strong to handle the hard knocks of tactical operations, with a durabl SPECS: Aluminum, hardcoat anodized, matte black. All models 1” (2.5cm) deployed length, 1¼” (3.2cm) wide, .435” (11mm) folded height. Front Sight w/Ears – 2-1⁄8" (5.4cm) folded length, 1.420” (3.61cm) deployed height from top of
Spring-loaded sights deploy at the push of a button to provide instant backup sighting. Quick Deploy System locks securely and requires a firm, positive press of the button to deploy or retract the sight, so it won’t accidentally activate when bumped—these sights stay where you put them. Minimal profile when folded—only .435” high—with radiused edges and a smoothly curved front surface to prevent snagging on foliage, gear, or clothing. Crossbolt and side bar provide solid attachment to MIL-STD 1913 Picatinny or Weaver-style rail systems. All-aluminum construction is lightweight, yet plenty strong to handle the hard knocks of tactical operations, with a durabl SPECS: Aluminum, hardcoat anodized, matte black. All models 1” (2.5cm) deployed length, 1¼” (3.2cm) wide, .435” (11mm) folded height. Front Sight w/Ears – 2-1⁄8" (5.4cm) folded length, 1.420” (3.61cm) deployed height from top of
Smith & Wesson’s Model 637 airweight is the original aluminum, small frame revolver. Extra features of the 637 airweight include a non reflective finish for discrete personal carry, a lightweight airweight frame and the Crimson Trace laser sighting system.
Precision-machined brass boresight and arbor insert into chamber; puts you right on target without having to fire a shot. Saves time and money in the shop and puts you close to point of aim when you head to the range for final sight in. This convenient system works for most pistol and rifle chamberings by using a separate laser boresight that fits inside a wide selection of chamber specific arbors so you can purchase only the arbors you need. 9mm and .17 H.M.R. Boresights are specific to those chamberings only. .223 Boresight fits inside the other rifle and shotgun arbors listed. .30 Carbine Boresight fits inside the .38/.357 and .45 Colt Arbors. Each Boresight includes a padded nylon case SPECS: Boresight and Arbors-machined brass. Max.laser output 5mW,630-660 nm wavelength. Uses three lithium batteries included. Case- Nylon, black, 9″ (22.8cm) long, 3½” (8.8cm) wide, 1″ (2.5cm) thick. Arbor ship weight 1lb.
Precision-machined brass boresight and arbor insert into chamber; puts you right on target without having to fire a shot. Saves time and money in the shop and puts you close to point of aim when you head to the range for final sight in. This convenient system works for most pistol and rifle chamberings by using a separate laser boresight that fits inside a wide selection of chamber specific arbors so you can purchase only the arbors you need. 9mm and .17 H.M.R. Boresights are specific to those chamberings only. .223 Boresight fits inside the other rifle and shotgun arbors listed. .30 Carbine Boresight fits inside the .38/.357 and .45 Colt Arbors. Each Boresight includes a padded nylon case SPECS: Boresight and Arbors-machined brass. Max.laser output 5mW,630-660 nm wavelength. Uses three lithium batteries included. Case- Nylon, black, 9″ (22.8cm) long, 3½” (8.8cm) wide, 1″ (2.5cm) thick. Arbor ship weight 1lb.
Precision-machined brass boresight and arbor insert into chamber; puts you right on target without having to fire a shot. Saves time and money in the shop and puts you close to point of aim when you head to the range for final sight in. This convenient system works for most pistol and rifle chamberings by using a separate laser boresight that fits inside a wide selection of chamber specific arbors so you can purchase only the arbors you need. 9mm and .17 H.M.R. Boresights are specific to those chamberings only. .223 Boresight fits inside the other rifle and shotgun arbors listed. .30 Carbine Boresight fits inside the .38/.357 and .45 Colt Arbors. Each Boresight includes a padded nylon case SPECS: Boresight and Arbors-machined brass. Max.laser output 5mW,630-660 nm wavelength. Uses three lithium batteries included. Case- Nylon, black, 9″ (22.8cm) long, 3½” (8.8cm) wide, 1″ (2.5cm) thick. Arbor ship weight 1lb.
Loop™ sling adapter, designed by Ashley Burnsed, provides single point, sling mounting at the rear of the receiver for the unique hook-attached, Simple Sling. No complicated procedures to learn. Without unslinging or adjusting the sling you can: Have both hands free to quickly access a second weapon; maintain complete control of your rifle, carbine or shotgun; make a rapid switch from right-hand to left-hand carry. Prevents the sling from becoming tangled in weapon mounted lights and sighting accessories. Requires removal of buttstock for installation. Sling Adapter and Simple Sling sold separately. SPECS: Sling Adapter, black, matte finish. CAR is steel, A1, A2 and 870 are aircraft-grade aluminum. Simple Sling, nylon web, black. 1.25″ (3.2cm) wide, 30″ (76.2cm) long. Adjustable for length.
Loop™ sling adapter, designed by Ashley Burnsed, provides single point, sling mounting at the rear of the receiver for the unique hook-attached, Simple Sling. No complicated procedures to learn. Without unslinging or adjusting the sling you can: Have both hands free to quickly access a second weapon; maintain complete control of your rifle, carbine or shotgun; make a rapid switch from right-hand to left-hand carry. Prevents the sling from becoming tangled in weapon mounted lights and sighting accessories. Requires removal of buttstock for installation. Sling Adapter and Simple Sling sold separately. SPECS: Sling Adapter, black, matte finish. CAR is steel, A1, A2 and 870 are aircraft-grade aluminum. Simple Sling, nylon web, black. 1.25″ (3.2cm) wide, 30″ (76.2cm) long. Adjustable for length.
Loop™ sling adapter, designed by Ashley Burnsed, provides single point, sling mounting at the rear of the receiver for the unique hook-attached, Simple Sling. No complicated procedures to learn. Without unslinging or adjusting the sling you can: Have both hands free to quickly access a second weapon; maintain complete control of your rifle, carbine or shotgun; make a rapid switch from right-hand to left-hand carry. Prevents the sling from becoming tangled in weapon mounted lights and sighting accessories. Requires removal of buttstock for installation. Sling Adapter and Simple Sling sold separately. SPECS: Sling Adapter, black, matte finish. CAR is steel, A1, A2 and 870 are aircraft-grade aluminum. Simple Sling, nylon web, black. 1.25″ (3.2cm) wide, 30″ (76.2cm) long. Adjustable for length.
Loop™ sling adapter, designed by Ashley Burnsed, provides single point, sling mounting at the rear of the receiver for the unique hook-attached, Simple Sling. No complicated procedures to learn. Without unslinging or adjusting the sling you can: Have both hands free to quickly access a second weapon; maintain complete control of your rifle, carbine or shotgun; make a rapid switch from right-hand to left-hand carry. Prevents the sling from becoming tangled in weapon mounted lights and sighting accessories. Requires removal of buttstock for installation. Sling Adapter and Simple Sling sold separately. SPECS: Sling Adapter, black, matte finish. CAR is steel, A1, A2 and 870 are aircraft-grade aluminum. Simple Sling, nylon web, black. 1.25″ (3.2cm) wide, 30″ (76.2cm) long. Adjustable for length.
Low-profile, flattop-mounted backup sights deploy instantly at the touch of a finger to provide relief sighting in fluid tactical situations. Drawing on their extensive manufacturing experience with high-grade, reinforced molded polymer technology, Magpul’s engineering team designed the versatile Magpul Back-Up Sight (MBUS) system to be robust, reliable, lightweight, easy to use, and affordable. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when the MBUS is folded. Spring-loaded ambi release mechanism lets you hit the grooved tab on either side, and the sight deploys and locks in place. Hit the same tabs to retract when you’re done. Int SPECS: Reinforced, injection-molded polymer, Black, Dark Earth, O.D. Green, or Foliage Green. Dimensions apply to front and rear sights; heights measured from top of rail to top of sight. 1.625” (4.1cm) long when deployed, 2.625” (6.7cm) long when folded, 1.25” (3.2cm) wide,
Low-profile, flattop-mounted backup sights deploy instantly at the touch of a finger to provide relief sighting in fluid tactical situations. Drawing on their extensive manufacturing experience with high-grade, reinforced molded polymer technology, Magpul’s engineering team designed the versatile Magpul Back-Up Sight (MBUS) system to be robust, reliable, lightweight, easy to use, and affordable. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when the MBUS is folded. Spring-loaded ambi release mechanism lets you hit the grooved tab on either side, and the sight deploys and locks in place. Hit the same tabs to retract when you’re done. Int SPECS: Reinforced, injection-molded polymer, Black, Dark Earth, O.D. Green, or Foliage Green. Dimensions apply to front and rear sights; heights measured from top of rail to top of sight. 1.625” (4.1cm) long when deployed, 2.625” (6.7cm) long when folded, 1.25” (3.2cm) wide,
Low-profile, flattop-mounted backup sights deploy instantly at the touch of a finger to provide relief sighting in fluid tactical situations. Drawing on their extensive manufacturing experience with high-grade, reinforced molded polymer technology, Magpul’s engineering team designed the versatile Magpul Back-Up Sight (MBUS) system to be robust, reliable, lightweight, easy to use, and affordable. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when the MBUS is folded. Spring-loaded ambi release mechanism lets you hit the grooved tab on either side, and the sight deploys and locks in place. Hit the same tabs to retract when you’re done. Int SPECS: Reinforced, injection-molded polymer, Black, Dark Earth, O.D. Green, or Foliage Green. Dimensions apply to front and rear sights; heights measured from top of rail to top of sight. 1.625” (4.1cm) long when deployed, 2.625” (6.7cm) long when folded, 1.25” (3.2cm) wide,
Low-profile, flattop-mounted backup sights deploy instantly at the touch of a finger to provide relief sighting in fluid tactical situations. Drawing on their extensive manufacturing experience with high-grade, reinforced molded polymer technology, Magpul’s engineering team designed the versatile Magpul Back-Up Sight (MBUS) system to be robust, reliable, lightweight, easy to use, and affordable. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when the MBUS is folded. Spring-loaded ambi release mechanism lets you hit the grooved tab on either side, and the sight deploys and locks in place. Hit the same tabs to retract when you’re done. Int SPECS: Reinforced, injection-molded polymer, Black, Dark Earth, O.D. Green, or Foliage Green. Dimensions apply to front and rear sights; heights measured from top of rail to top of sight. 1.625” (4.1cm) long when deployed, 2.625” (6.7cm) long when folded, 1.25” (3.2cm) wide,
Picatinny rails on all four sides offer a multitude of accessory attachment points. Lets you position each accessory in the location that best fits your needs to improve function and increase usability. Sturdy, machined aluminum replaces the handguard; gives solid support for vertical grips, optical and laser sights, plus infrared and flashlights. Drop-on installation requires no modifications to your rifle. Fits metric and inch pattern rifles. Long fits full-length gas system, Short fits DSA carbines with short handguards. Made in the USA. SPECS: 6061T6 Aluminum, anodized, black, matte finish. Long – 11¾” (29.8cm) long. Short – 8¼” (21cm) long.
Picatinny rails on all four sides offer a multitude of accessory attachment points. Lets you position each accessory in the location that best fits your needs to improve function and increase usability. Sturdy, machined aluminum replaces the handguard; gives solid support for vertical grips, optical and laser sights, plus infrared and flashlights. Drop-on installation requires no modifications to your rifle. Fits metric and inch pattern rifles. Long fits full-length gas system, Short fits DSA carbines with short handguards. Made in the USA. SPECS: 6061T6 Aluminum, anodized, black, matte finish. Long – 11¾” (29.8cm) long. Short – 8¼” (21cm) long.
Projects a bright red or green laser dot so you can set scopes, red dots, or iron sights quickly and easily. Cone-shaped spud and interchangeable inserts automatically center the laser unit in the bore of any .22 to .50 caliber gun with a 4″ or longer barrel. Permanently calibrated with precision alignment tooling at the factory; projects a 2″ to 3″ diameter dot at 100 yards. CNC-machined from aluminum, then hardcoat anodized to protect the finish from nicks, dings, and surface wear. All models provide 1.5 hours continuous use. Automatic digital circuitry adjusts laser output to prevent brightness fade toward the end of battery life. Standard Kit includes the laser unit with a 635-nan SPECS: Aluminum housing, hard anodized, gloss black finish. Laser – Class IIIa, 5mw max output. Standard Kit – Bore sighter: 6” (15.2cm) long, .625” (1.6cm) diameter at head. Kit also contains adjustable Delrin adapters with mounting screws, three A-76 batteries, hex wrench, daylight laser
SWAROBRIGHT? unique prism coating ensures perfect color fidelity and enhanced brightness across the whole light spectrum, resulting in contrast-rich picture quality enhanced by the optimum color fidelity. Swarovski Optik is the first and only manufacturer in the world to use this special mirror technology in the serial production of binoculars, thus impressively confirming its role at the forefront of innovation. Combines a Swarovski monocular 8×30 optical system with SWAROBRIGHT and the latest ranging technologies for the highest quality of measurement and observation simultaneously. Featuring 30mm viewing optics and 30mm receiving optics, this compact, ergonomic and lightweight rangefinder has scan mode, an illuminated LCD display that automatically adjusts for brightness to light conditions and is fully waterproof. LCD display features an aiming circle for rapid target acquisition, while the large trigger button is easy to use even in cold weather with gloves so you have absolute certainty you’ll always find the range to your target. Delivers +/- 1 yard accuracy from 10 yards out to 1500 yards. Large ocular lens for comfortable viewing, large field of view, 408′ at 1000 yards, combined with a twist-in adjustable eyecup for eyeglass wearers. Lightweight and compact–weighs only 12.5 oz. and measures just 4-3/4″ x 3-1/2″ x 1-3/4″. Includes built-in tripod adapter, carrying strap, holster and CR2 3V lithium battery. Swarovski Laser Guide 8×30mm Rangefinder features: 1500 yard range Swarovski 8×30mm optics Swarobright prism coating Illuminated LCD display with automatic brightness adjustment +/- 1 yard accuracy Twist in adjustable eyecup Large trigger button Large ocular lens for easy viewing
The Improved Tang Sight’s quick-release post system makes it easy to replace the post that came with your sight with a higher or lower one for targeting at different ranges.Choose a lower post for close-in targets or a taller post for longer ranges. Post height is also click adjustable for fine-tuning when sighting in; each click represents ¼” of adjustment at 100 yards. A jam nut locks the elevation, so you can remove and reinstall a post without losing settings.
The Improved Tang Sight’s quick-release post system makes it easy to replace the post that came with your sight with a higher or lower one for targeting at different ranges.Choose a lower post for close-in targets or a taller post for longer ranges. Post height is also click adjustable for fine-tuning when sighting in; each click represents ¼” of adjustment at 100 yards. A jam nut locks the elevation, so you can remove and reinstall a post without losing settings.
The Improved Tang Sight’s quick-release post system makes it easy to replace the post that came with your sight with a higher or lower one for targeting at different ranges.Choose a lower post for close-in targets or a taller post for longer ranges. Post height is also click adjustable for fine-tuning when sighting in; each click represents ¼” of adjustment at 100 yards. A jam nut locks the elevation, so you can remove and reinstall a post without losing settings.
Sightmark 9mm Luger Laser Bore Sight The Sightmark® Laser Bore Sight provides the most convenient and accurate method for sighting in rifles of all types. Simply chamber the bore sight like a regular bullet and a laser dot will show exactly where the rifle is aiming; it’s easy to sight in any scope without firing a single shot. Live fire is only needed to fine tune the weapon being sighted in o…
Meet the brightest and most visible laser we’ve ever created. The New Kryptonyte Laser Bore Sighting System uses a green laser that is 100 times more visible to the human eye than traditional red lasers. This daylight-visible 532-nanometer green laser creates a dot that can be seen up to 100 yards with the naked eye, meaning you can sight-in anywhere from 10 yards to 100 yards away. • The ne…
UTG MK23 Spring Powered airsoft pistol Rail System.?
What things can fit on the UTG Mk23 rails? I don’t really care about flash lights but what laser sights can fight on it?
It has a standard Weaver or Picatinny rail, so it can mount anything that has a Weaver mount. Basically, you can put on any laser sights that are designed for weapons. You can find nice cheap but good ones at www.matchstickglobal.com.
Whenever you need the very best in fast handling, easy to carry, travel ready magnum firepower, there is no need to look past the Browning BLR Lightweight Takedown w/Pistol Grip. Nearly identical to the one piece models, it takes a keen eye to notice the uniqueness of the rifle. The easy to use takedown system is unobtrusive and allows the rifle to be rapidly assembled or disassembled with just the flip of the flush mount lever. A traditional scope can be affixed to the receiver, or a long eye relief scope can be mounted directly to the barrel with an optional one piece alloy scout style scope mount that stays attached to the barrel to maintain zero when the rifle is taken down. Click here for Browning sales tax offer!
Whenever you need the very best in fast handling, easy to carry, travel ready magnum firepower, there is no need to look past the Browning BLR Lightweight Takedown w/Pistol Grip. Nearly identical to the one piece models, it takes a keen eye to notice the uniqueness of the rifle. The easy to use takedown system is unobtrusive and allows the rifle to be rapidly assembled or disassembled with just the flip of the flush mount lever. A traditional scope can be affixed to the receiver, or a long eye relief scope can be mounted directly to the barrel with an optional one piece alloy scout style scope mount that stays attached to the barrel to maintain zero when the rifle is taken down. Click here for Browning sales tax offer!
Whenever you need the very best in fast handling, easy to carry, travel ready magnum firepower, there is no need to look past the Browning BLR Lightweight Takedown w/Pistol Grip. Nearly identical to the one piece models, it takes a keen eye to notice the uniqueness of the rifle. The easy to use takedown system is unobtrusive and allows the rifle to be rapidly assembled or disassembled with just the flip of the flush mount lever. A traditional scope can be affixed to the receiver, or a long eye relief scope can be mounted directly to the barrel with an optional one piece alloy scout style scope mount that stays attached to the barrel to maintain zero when the rifle is taken down. Click here for Browning sales tax offer!
Restore or customize your High Standard, push button, takedown pistol with a factory replacement barrel. All barrels are drilled and tapped for Universal Scope Mount. Models with front sight cut noted in chart. Sight not included. SPECS: Steel, black matte. Available in .17 Hi-Standard and .22LR calibers.
Restore or customize your High Standard, push button, takedown pistol with a factory replacement barrel. All barrels are drilled and tapped for Universal Scope Mount. Models with front sight cut noted in chart. Sight not included. SPECS: Steel, black matte. Available in .17 Hi-Standard and .22LR calibers.
On the bench or in the field, you’ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun’s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Two takedown bits for pistol itself and magazine, plus three bits and a .050″ Allen wrench for adjustable aftermarket sights. Check out the video demonstration of the Glock Pistol Scr SPECS: 6-3⁄16″ (15.7cm) long overall. 1¼” (3.2cm) diameter grip.
Restore or customize your High Standard, push button, takedown pistol with a factory replacement barrel. All barrels are drilled and tapped for Universal Scope Mount. Models with front sight cut noted in chart. Sight not included. SPECS: Steel, black matte. Available in .17 Hi-Standard and .22LR calibers.
Restore or customize your High Standard, push button, takedown pistol with a factory replacement barrel. All barrels are drilled and tapped for Universal Scope Mount. Models with front sight cut noted in chart. Sight not included. SPECS: Steel, black matte. Available in .17 Hi-Standard and .22LR calibers.
Restore or customize your High Standard, push button, takedown pistol with a factory replacement barrel. All barrels are drilled and tapped for Universal Scope Mount. Models with front sight cut noted in chart. Sight not included. SPECS: Steel, black matte. Available in .17 Hi-Standard and .22LR calibers.
On the bench or in the field, you’ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun’s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Two takedown bits for pistol itself and magazine, plus three bits and a .050″ Allen wrench for adjustable aftermarket sights. Check out the video demonstration of the Glock Pistol Scr SPECS: 6-3⁄16″ (15.7cm) long overall. 1¼” (3.2cm) diameter grip.
Restore or customize your High Standard, push button, takedown pistol with a factory replacement barrel. All barrels are drilled and tapped for Universal Scope Mount. Models with front sight cut noted in chart. Sight not included. SPECS: Steel, black matte. Available in .17 Hi-Standard and .22LR calibers.
Restore or customize your High Standard, push button, takedown pistol with a factory replacement barrel. All barrels are drilled and tapped for Universal Scope Mount. Models with front sight cut noted in chart. Sight not included. SPECS: Steel, black matte. Available in .17 Hi-Standard and .22LR calibers.
Recoil Springs – Choose from factory weight, 5.5 pounds or extra power 6, 6.5 or 7 pound recoil springs. All include an extra power firing pin spring. Magazine Springs – 3-pak of 5% extra power magazine springs. Service Pack – 1 each of the factory standard springs: recoil spring, firing pin spring, extractor spring, slide lock spring, trigger bar spring, hammer spring, sear spring, magazine catch spring and takedown spring. SPECS: Spring steel. Fits all push-button, takedown models.
J. Martin. Approximately 14 pages. 8½” x 11″. Over 40 volumes covering field stripping and disassembly procedures for many popular firearms. Detailed, step-by-step instructions, with large photos of disassembly sequence and reassembly tips.
J. Martin. Approximately 14 pages. 8½” x 11″. Over 40 volumes covering field stripping and disassembly procedures for many popular firearms. Detailed, step-by-step instructions, with large photos of disassembly sequence and reassembly tips.
Pivot and takedown pins with easy-to-grasp, oversized heads make separating upper and lower receiver halves fast and easy. Simply grasp the large, button-style head and disengage the pin—no fumbling for a punch and scratching the receiver. Pin shafts are designed to lock as securely as factory pins. Perfect for the shooter who mounts different top ends for different applications on a single lower receiver. Precision machined, heat-hardened steel with long-wearing mil-spec Parkerized finish. SPECS: Steel, matte black finish. Set of 1 front pivot pin, 1 rear takedown pin. Fits receivers with .250″ (6.3mm) diameter pivot and takedown pins.
High-impact plastic tools drive out the front and rear takedown pins or help get the magazine catch out from your M16/AR-15 without scratching or marring the metal. Pushtool for the takedown pins comes in two versions: a bench model or a handy key ring model. Magcatch tool compresses the spring to make removal of the magazine catch easier. SPECS: High-impact plastic, black.
High-impact plastic tools drive out the front and rear takedown pins or help get the magazine catch out from your M16/AR-15 without scratching or marring the metal. Pushtool for the takedown pins comes in two versions: a bench model or a handy key ring model. Magcatch tool compresses the spring to make removal of the magazine catch easier. SPECS: High-impact plastic, black.
High-impact plastic tools drive out the front and rear takedown pins or help get the magazine catch out from your M16/AR-15 without scratching or marring the metal. Pushtool for the takedown pins comes in two versions: a bench model or a handy key ring model. Magcatch tool compresses the spring to make removal of the magazine catch easier. SPECS: High-impact plastic, black.
8½” x 11″. Softbound. Exact duplicate of the original Win- chester factory, step-by-step sequence of takedown and assembly instructions. Large, easy-to-see, black and white line drawings and clear, well written text detail and explain the factory- approved method and proper tools for correct takedown and reassembly. Cover only those models listed.
8½” x 11″. Softbound. Exact duplicate of the original Win- chester factory, step-by-step sequence of takedown and assembly instructions. Large, easy-to-see, black and white line drawings and clear, well written text detail and explain the factory- approved method and proper tools for correct takedown and reassembly. Cover only those models listed.
This digital document is an article from American Gunsmith, published by Belvoir Media Group, LLC on December 1, 2009. The length of the article is 399 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.Citation DetailsTitle: High Standard H-D takedown.(Rea…
Takedown Rifle Case – Browning 22 Auto – Galati Gear The Takedown Rifle Case holds the Browning 22 auto, Charter Arms Explorer, Thompson Contender, Scoped Handguns and other firearms not exceeding 23″ in length. Features two padded pockets to keep the barrel and butt stock separate. Keep your favorite rifle close while camping or hunting. Made from PVC Tactical Nylon. Includes a sewn carry handle….
ADG Sports Silverside Takedown Shotgun or Tactical Rifle Case… a protective shield for your firearms! Stores your Shotgun or Tactical Rifle in impact-proof safety! Each Silverside Case is made of tough polycarbonate blended plastic for shockproof protection. Features key locking latches to keep curious hands out of your business. Spot on: Thick, double-layer foam padding absorbs shock if you dro…
How do I reinstall the takedown pin on a Ruger LCP?
I recently bought a Ruger LCP (which is a fine pistol I might add), and the time came to clean it. Now, after having reassembled nearly all of the components, I can’t figure out how to reinstall the takedown pin. I know there is a trick with finding the right angle, but after 15 minutes of trying, I’m still lost. Any suggestions?
If you look at the hole where the take down pin goes back into the slide, you should see a little silver wire near the bottom edge (closest to the frame of the gun.) Use the tip of the pin to push that wire down into the frame…once you’ve moved it out of the way, you should be able to push the pin right in and your pistol will be correctly assembled.
Lightweight, titanium disconnector improves lock time and helps reduce pretravel for better accuracy. Precision machined, high tech EDM process allows optimum tolerances to be held. Use in conjunction with Volquartsen MarkII/MarkIII Accurizing Kits (available separately) for the best trigger pull possible. SPECS: Titanium lever. Steel pin. .1 oz. (2.8g) weight. Fits Ruger Mark II/MarkIII & 22/45™ pistols.
Drop-in sear provides a crisp, clean, responsive trigger pull for Ruger semi-auto .22LR pistols. Engagement surface is precision-ground and polished – no stoning required. Made from tool steel and then hardened. Includes sear spring. SPECS: A2 tool steel, in-the-white, hardened to Rc 58-60. Includes sear spring. Fits Ruger Mark I, II, and III pistols.
Large, contoured, bottom-swell heelrest and wide, upswept thumb-rest straighten and extend the wrist for a relaxed, steadier hold and more reliable accuracy. Wedge-shaped grip area (wide in the rear, narrow in front) and evenly spaced finger grooves match the natural shape of the hand. Flexible, synthetic rubber construction with impressed checking ensures secure, no-slip one- or two-hand hold. Available for Ruger Mark II, and Mark III pistols. SPECS: Thermo-molded Volthane rubber, black. Approx. 3¼” (8.2cm) wide at base, 4¼” (10.7cm) high, 5.2 oz. (147 g). Right-hand (RH) and left-hand (LH). Includes Allen head screws and wrench. Mark II – One-piece design fits Ruger Mark II (A-10,000) only. Mark III – Two
Large, contoured, bottom-swell heelrest and wide, upswept thumb-rest straighten and extend the wrist for a relaxed, steadier hold and more reliable accuracy. Wedge-shaped grip area (wide in the rear, narrow in front) and evenly spaced finger grooves match the natural shape of the hand. Flexible, synthetic rubber construction with impressed checking ensures secure, no-slip one- or two-hand hold. Available for Ruger Mark II, and Mark III pistols. SPECS: Thermo-molded Volthane rubber, black. Approx. 3¼” (8.2cm) wide at base, 4¼” (10.7cm) high, 5.2 oz. (147 g). Right-hand (RH) and left-hand (LH). Includes Allen head screws and wrench. Mark II – One-piece design fits Ruger Mark II (A-10,000) only. Mark III – Two
Ruger rimfire pistols epitomize the Ruger philosophy of reliability, accuracy, and value, and all are designed and built by American workers entirely in the USA. Ruger Mark III (including Hunter) pistols represent the continuing evolution of Ruger .22 pistols to meet the demands of todays shooters. They are simple, rugged, reliable and affordable, making them a great value for any sporting purpose.
Pre-machined aluminum pillars solve the difficult problem of bedding Ruger bolt action centerfire rifles. The front pillar is cut to match the 60 degree angle of the receiver screw; pre-notched with the correct contour and angles to fit against the bottom of the recoil lug and set square with the floorplate hinge. Fits all Ruger 77 and M77 Mark II rifles except VT target models. SPECS: Aluminum, natural finish. Front – .600″ (15.2mm) long, .535″ (13.6mm) dia. Rear – 1.145″ (2.9cm) long, .535″ (13.6mm) dia.
Increases accuracy by providing a lighter-feeling, smoother-operating trigger with no take-up or overtravel. Lets you concentrate on making your shot and not overcoming a long, heavy trigger pull. Adjustable for weight of pull from 1½ to 4 lbs. Changes in letoff are conveniently adjustable from outside the stock with the turn of a set screw. Models for Ruger M77® Mark II, M77® Hawkeye®, and 77/22®. SPECS: 17-4 stainless steel, dark grey. .250″ (6.3mm) wide shoe. Includes Allen wrench, spring seat and instructions. Mark II – Fits Ruger M77 Mark II centerfire rifles except VT varmint models with 2-stage trigger. Hawkeye – Fits all M77 Hawkeye centerfire rifles. 77/22 – Fits 77/2
Increases accuracy by providing a lighter-feeling, smoother-operating trigger with no take-up or overtravel. Lets you concentrate on making your shot and not overcoming a long, heavy trigger pull. Adjustable for weight of pull from 1½ to 4 lbs. Changes in letoff are conveniently adjustable from outside the stock with the turn of a set screw. Models for Ruger M77® Mark II, M77® Hawkeye®, and 77/22®. SPECS: 17-4 stainless steel, dark grey. .250″ (6.3mm) wide shoe. Includes Allen wrench, spring seat and instructions. Mark II – Fits Ruger M77 Mark II centerfire rifles except VT varmint models with 2-stage trigger. Hawkeye – Fits all M77 Hawkeye centerfire rifles. 77/22 – Fits 77/2
Easy-to-install kit replaces factory trigger and hammer parts for a smooth, crisp, 2¼ lb. trigger pull and faster bolt cycling. Machined aluminum target trigger, with smooth, radiused, .36″-wide trigger face, adjust for take-up and overtravel with included Allen wrench. Trigger is matte black, hardcoat anodized for superior strength and wear resistance. Redesigned stainless steel target hammer and micro-polished sear are surface ground to exact tolerances for a short, fast trigger pull. Engagement surfaces are precision-ground and polishedEasy-to-install kit replaces factory trigger and hammer parts for a smooth, crisp, 2¼ lb. trigger pull and faster bolt cycling. Machined aluminum target trigger, with smooth, radiused, .36″-wide trigger face, adjust for take-up and overtravel with included Allen wrench. Trigger is matte black, hardcoat anodized for superior strength and wear resistance. Redesigned stainless steel target hammer and micro-polished sear are surface ground to exact tolerances for a short, fast trigger pull. Engagement surfaces are precision-ground and polished—no stoning required. Polished trigger plunger and trigger rebound spring are matched to the redesigned parts to further reduce trigger pull and pro SPECS: Kit includes target trigger, trigger plunger, trigger rebound spring, target hammer, sear, sear spring, bolt release, Allen wrench, and complete installation instructions. Fits Ruger Mark III and .22/45MkIII 22/45 pistols only. May require minor fitting.
Large, contoured, bottom-swell heelrest and wide, upswept thumb-rest straighten and extend the wrist for a relaxed, steadier hold and more reliable accuracy. Wedge-shaped grip area (wide in the rear, narrow in front) and evenly spaced finger grooves match the natural shape of the hand. Flexible, synthetic rubber construction with impressed checking ensures secure, no-slip one- or two-hand hold. Available for Ruger Mark II, and Mark III pistols. SPECS: Thermo-molded Volthane rubber, black. Approx. 3¼” (8.2cm) wide at base, 4¼” (10.7cm) high, 5.2 oz. (147 g). Right-hand (RH) and left-hand (LH). Includes Allen head screws and wrench. Mark II – One-piece design fits Ruger Mark II (A-10,000) only. Mark III – Two
Increases accuracy by providing a lighter-feeling, smoother-operating trigger with no take-up or overtravel. Lets you concentrate on making your shot and not overcoming a long, heavy trigger pull. Adjustable for weight of pull from 1½ to 4 lbs. Changes in letoff are conveniently adjustable from outside the stock with the turn of a set screw. Models for Ruger M77® Mark II, M77® Hawkeye®, and 77/22®. SPECS: 17-4 stainless steel, dark grey. .250″ (6.3mm) wide shoe. Includes Allen wrench, spring seat and instructions. Mark II – Fits Ruger M77 Mark II centerfire rifles except VT varmint models with 2-stage trigger. Hawkeye – Fits all M77 Hawkeye centerfire rifles. 77/22 – Fits 77/2
Precision machined from aluminum billet to cut down trigger weight and eliminate the extra pressure required to move the heavy, steel part. Helps produce maximum pull weight reduction for improved accuracy. Stop screw adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Includes trigger spring and trigger spring plunger. SPECS: Aluminum, black, anodized finish. Trigger face – .354″ (9mm) wide. .2 oz. (5.7g) wt. Fits Ruger Mark I, Mark II, and Mark III™ pistols.
Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will
Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will
Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will
Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will
Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will
Sort of like a Swiss Army knife, this small, self-contained, takedown tool has everything you need for field stripping your Ruger. Delrin®, tool body features an aluminum end cap with steel, wire loop for removing the mainspring housing latch. Punch on opposite end drives out the bolt stop pin without marring the metal. Unscrew end cap to expose the extractor removal pin. Use pin to remove the extractor, plunger and spring for cleaning or replacement. A must have for the Mark I /Mark II owner. SPECS: Body/Punch – Delrin®, black. Extractor Tool – Aluminum/steel. 3-7/8″ (cm) OAL, ½” (1.3cm) diameter.
CNC machined aluminum chassis with two integral, MIL-STD 1913 Picatinny rails lets you attach accessories such as lights, lasers, and other tactical equipment to your pistol. Features a 4-1/8″ long, 10-slot bottom rail and a 4-7/8″ long, 12-slot top rail for a variety of options. Installs on the slide without modifications to the gun, and secures with three Allen head screws for a rock-solid installation. Includes removable front and rear sights for use as back-up in case your optics fail. Rear sight is CNC milled from a solid steel billet for long service life; front sight is machined from aluminum for reduced weight. Serrated rear sight features a slight reverse angle to reduce glare and i SPECS: Aluminum, hardcoat anodized, matte black. 9½” (24cm) long, 2¼” (5.7cm) high, 1-1⁄8″ (2.8cm) wide, 11 oz. (312g) weight. Includes front & rear sights and instructions. Sights – Steel, blue, matte finish. Rear Blade – .767” (19.5mm) wide .402” (10mm) high. Rear Notch – .11” (2.8mm) wi
Recommended by leading stockmakers for final accurate fitting of the stock to action. SPECS: Handles are 3″ (7.6cm) long. Screw lengths vary for the different guns. Sold in pairs only.
Perfect for training, plinking, target shooting, and small game hunting, the 22/45 is available in blued and stainless steel, in a variety of barrel lengths, including fluted barrels on the Hunter models. No other .22 pistol comes close to providing the feel of the classic 1911 pistol together with the proven reliability and value of the Ruger 22/45 pistols. Two ten round magazines and a high impact case are included with each pistol. All adjustable sight Mark III .22 pistols come drilled and tapped for a Weaver type scope base adapter, included with each pistol.
Perfect for training, plinking, target shooting, and small game hunting, the 22/45 is available in blued and stainless steel, in a variety of barrel lengths, including fluted barrels on the Hunter models. No other .22 pistol comes close to providing the feel of the classic 1911 pistol together with the proven reliability and value of the Ruger 22/45 pistols. Two ten round magazines and a high impact case are included with each pistol. All adjustable sight Mark III .22 pistols come drilled and tapped for a Weaver type scope base adapter, included with each pistol.
Perfect for training, plinking, target shooting, and small game hunting, the 22/45 is available in blued and stainless steel, in a variety of barrel lengths, including fluted barrels on the Hunter models. No other .22 pistol comes close to providing the feel of the classic 1911 pistol together with the proven reliability and value of the Ruger 22/45 pistols. Two ten round magazines and a high impact case are included with each pistol. All adjustable sight Mark III .22 pistols come drilled and tapped for a Weaver type scope base adapter, included with each pistol.
With adjustable rear sights, the Target model is for precision shooting. Features Loaded Chamber Indicator, comfortable grip, manual safety and Internal Cylindrical Bolt.
Reliable, easy-to-install, upgrade kits replace some or all of the factory trigger components to deliver match-grade performance in your rifle. Specially designed, system (except Mauser 98) moves the sear engagement point to a precise location for more leverage that lightens pull weight. Fewer working parts help eliminate malfunctions caused by moisture and freezing temperatures. Precision machined and polished engagement surfaces help minimize drag for smooth, crisp let-off. All models use the factory safety without alteration. Drop-in installation. Polished sear and trigger lever, plus a reduced power return spring smoothes trigger movement and lightens pull to 2 pounds. Adjustments for se SPECS: Steel, black matte or polished silver finish. 2 lb. pull weight. MK II – Fits Ruger M77 Mark II. Will not fit Target (VT) models. 77/22 & 77/17 – Fits Ruger 77/22, 77/22 WMR, and 77/17.
Reliable, easy-to-install, upgrade kits replace some or all of the factory trigger components to deliver match-grade performance in your rifle. Specially designed, system (except Mauser 98) moves the sear engagement point to a precise location for more leverage that lightens pull weight. Fewer working parts help eliminate malfunctions caused by moisture and freezing temperatures. Precision machined and polished engagement surfaces help minimize drag for smooth, crisp let-off. All models use the factory safety without alteration. Drop-in installation. Polished sear and trigger lever, plus a reduced power return spring smoothes trigger movement and lightens pull to 2 pounds. Adjustments for se SPECS: Steel, black matte or polished silver finish. 2 lb. pull weight. MK II – Fits Ruger M77 Mark II. Will not fit Target (VT) models. 77/22 & 77/17 – Fits Ruger 77/22, 77/22 WMR, and 77/17.
Reliable, easy-to-install, upgrade kits replace some or all of the factory trigger components to deliver match-grade performance in your rifle. Specially designed, system (except Mauser 98) moves the sear engagement point to a precise location for more leverage that lightens pull weight. Fewer working parts help eliminate malfunctions caused by moisture and freezing temperatures. Precision machined and polished engagement surfaces help minimize drag for smooth, crisp let-off. All models use the factory safety without alteration. Drop-in installation. Polished sear and trigger lever, plus a reduced power return spring smoothes trigger movement and lightens pull to 2 pounds. Adjustments for se SPECS: Steel, black matte or polished silver finish. 2 lb. pull weight. MK II – Fits Ruger M77 Mark II. Will not fit Target (VT) models. 77/22 & 77/17 – Fits Ruger 77/22, 77/22 WMR, and 77/17.
Reliable, easy-to-install, upgrade kits replace some or all of the factory trigger components to deliver match-grade performance in your rifle. Specially designed, system (except Mauser 98) moves the sear engagement point to a precise location for more leverage that lightens pull weight. Fewer working parts help eliminate malfunctions caused by moisture and freezing temperatures. Precision machined and polished engagement surfaces help minimize drag for smooth, crisp let-off. All models use the factory safety without alteration. Drop-in installation. Polished sear and trigger lever, plus a reduced power return spring smoothes trigger movement and lightens pull to 2 pounds. Adjustments for se SPECS: Steel, black matte or polished silver finish. 2 lb. pull weight. MK II – Fits Ruger M77 Mark II. Will not fit Target (VT) models. 77/22 & 77/17 – Fits Ruger 77/22, 77/22 WMR, and 77/17.
Keep your Ruger 10/22 rifle shooting with the aftermarket equivalent to the factory safety. Mechanically identical to the factory safety, but machined instead of cast. Includes red nylon/rubber activation indicator for fast visual check of safety status. SPECS: Steel, blue finish. Fits Ruger 10/22 rifles, all calibers.
Smooth, solid steel two-piece bases provide an extra strong mount system. Accept Warne Maxima rings or any Weaver-style ring. Three finishes. SPECS: 12L14 steel. Available in polished blue, matte blue, or silver. Two-piece only, Includes mounting screws. Do not mix Maxima bases with other brands of Weaver-style base, the heights are often different. RHS = Rear Hole Spacing.Fits #1 fits Browning BAR, BAR II, Mark II,
Smooth, solid steel two-piece bases provide an extra strong mount system. Accept Warne Maxima rings or any Weaver-style ring. Three finishes. SPECS: 12L14 steel. Available in polished blue, matte blue, or silver. Two-piece only, Includes mounting screws. Do not mix Maxima bases with other brands of Weaver-style base, the heights are often different. RHS = Rear Hole Spacing.Fits #1 fits Browning BAR, BAR II, Mark II,
Smooth, solid steel two-piece bases provide an extra strong mount system. Accept Warne Maxima rings or any Weaver-style ring. Three finishes. SPECS: 12L14 steel. Available in polished blue, matte blue, or silver. Two-piece only, Includes mounting screws. Do not mix Maxima bases with other brands of Weaver-style base, the heights are often different. RHS = Rear Hole Spacing.Fits #1 fits Browning BAR, BAR II, Mark II,
Save time and money by providing repeatable setup, accurate, measurable adjustments and suitability for many guns. Eighteen economical hammer and trigger/sear adapters are available for popular guns plus, hammer and trigger/sear alignment pin holes are provided for six different guns; 24 jigs combined in one fixture. To use: mount hammer or trigger/sear on adapter, set and lock at correct index mark as instructed. Set stoning angle by counting “clicks” specified to raise or lower elevator and stoning guide. Lock guide, place stone on both roller and hammer or trigger/sear, and stone as normal. Easily adjustable to allow variations in stoning angle for exact, desired trig SPECS: 5-9/16″ (14.1cm) long x 2-9/16″ (6.5cm) wide x 3″ (7.6cm) high. ¾” (19mm) thick base. 5¾” lb. (2.6kg) Blued steel. Includes roller guide and one adapter in the price.
Thumb-saving, lightweight magazine loader provides fast, painless, 20-round magazine loading in less than 8 seconds. Accepts 10-round stripper clips or loose rounds for easy loading of 20-round magazines, and is capable of unloading a 20-round magazine in 10 seconds. Ambidextrous, grooved thumb slide provides a non-slip grip for right- or left-hand loading. Constructed of durable, reinforced polymer for dependable operation under extreme field conditions. Designed to load factory Ruger .223 Mini-14 magazines. SPECS: Polymer, black. 5-3⁄8″ (13.6cm) long, 1-1⁄8″ (2.8cm) wide, 1¼” (3.2cm) high. 1.2 oz. (34g) weight. Accepts 10-round stripper clips or loose rounds. Fits factory Ruger .223 Mini-14 magazines. May fit some aftermarket magazines.
Convert Ruger PC9, PC40, Ranch Rifle and Mini-30 to Weaver-style mount. Provides mounting for Holosight®, Dot sights and scopes. Attaches directly to the Ruger ring cuts in the receiver, no gunsmithing required. SPECS: Aluminum, matte black. 4.75″ (12cm) long.
Four flat blade bits to fit Ruger Single Action screws for base pin latch, grip frame, and ejector housing, plus an extra-long hex bit for Bisley backstrap screws. SPECS: 8″ (20.3cm) long overall. 1¼” (3.2cm) diameter grip. Bits fit Ruger Blackhawk®, Vaquero®, Bisley, and 2005 and later New Vaquero®.
Four flat blade bits to fit Ruger Single Action screws for base pin latch, grip frame, and ejector housing, plus an extra-long hex bit for Bisley backstrap screws. SPECS: 8″ (20.3cm) long overall. 1¼” (3.2cm) diameter grip. Bits fit Ruger Blackhawk®, Vaquero®, Bisley, and 2005 and later New Vaquero®.
The Ruger GP100 Evolution Paddle Holster features a one piece body construction designed to securely fit the Ruger GP100. It also offers a retention adjustment screw to select presentation with the security of retention and a rubberized paddle insert for comfort and stability. A steel reinforced rivet attachment and protective sight channel make this a well respected holster that will offer years of reliable service.
Made to fit the Ruger LCR Square profile with pre-drilled base for easy installation Bright and durable Protective clear overmold HiViz Ruger Front Sights are made to fit the Ruger LCR . Square profile with pre-drilled base for easy installation. Bright and durable, with a protective clear overmold.
Famous Leupold styling and quality in rings that mount directly to the integral dovetails on Ruger, Sako, and CZ rifles. SPECS: Steel. High polish blue (PB), Matte blue (Matte) or Silver finish. Ring heights are from top of base to center of ring.
Famous Leupold styling and quality in rings that mount directly to the integral dovetails on Ruger, Sako, and CZ rifles. SPECS: Steel. High polish blue (PB), Matte blue (Matte) or Silver finish. Ring heights are from top of base to center of ring.
Famous Leupold styling and quality in rings that mount directly to the integral dovetails on Ruger, Sako, and CZ rifles. SPECS: Steel. High polish blue (PB), Matte blue (Matte) or Silver finish. Ring heights are from top of base to center of ring.
One end for Remington 600-700 series bolt actions including XP-100 and 40; the other for Ruger. Handscrew compresses spring until cross pin can be driven out. SPECS: Body is 5-15/16″ (15.1cm) long. 5/8″ (15.9mm) diameter. 7½” oz. (21.3g). Case hardened steel.
With adjustable rear sights, the Target model is for precision shooting. Features Loaded Chamber Indicator, comfortable grip, manual safety and Internal Cylindrical Bolt.
With adjustable rear sights, the Target model is for precision shooting. Features Loaded Chamber Indicator, comfortable grip, manual safety and Internal Cylindrical Bolt.
Jim Clark Sr. founded his business in 1950, since then Clark Custom Guns has been an industry leader in customizing the 1911 style handguns, ruger .22 pistols and ruger .22 rifles. Clark was a master gunsmith “Pistolsmith of the Year” recipient in 1985 and winner of the “Outstanding American Handgunner Award” in 1990. All this on top of his accomplishments as a Champion Bullseye competitor, beco…
Here is the definitive book about the pistol that has served more than a million owners so well. Exploded diagrams show how to field-strip and reassemble with a minimum of fuss, and photos illustrate variations, modifications and accessories for one of the most popular .22 automatics ever made….
The Ruger 10/22 is one of the most popular .22-caliber rifles of all time. It is relatively inexpensive, exceptionally reliable and accurate, and easy to work on, and parts are widely available. But as good as these versatile little rifles are, they can be made even better with a little work on their triggers, actions and barrels. This work is easy to do, even for people with little or no machinin…
Our Disassembly & Reassembly Guides have (16) pages and cover a brief history, and complete disassembly, and reassembly of the firearm. High resolution illustrations and pictures guide you through the entire process. This Guide has 19 pages and 36 images!…
Where Can I Get a Cheap Ruger Mark III Pistol ???
i was thinking of a ruger mark III pistol hunter with stainless and a fluted barrell
Gun shops, Pawn Shops, Gun Shows, Internet auction sites, Newspaper classifieds are just some ideas
Great accuracy from a realistic soft air replica pistol 302 fps 12 shot magazine Comes with bag of soft air BBs Great for indoor or outdoor shooting, the Smith & Wesson M4505 Soft Air Spring Pistol gives you great accuracy from a realistic soft air pistol. This pistol uses high pump energy to deliver shot velocities of 302 fps. Magazine holds 12 soft air BB’s. Comes with bag of plastic BBs.
Great accuracy from a realistic soft air replica pistol BAXS shooting system 315 fps 25 shot magazine Comfortable soft rubber grip Enjoy the increased accuracy and distance of the BAXS shooting system in your next soft air match with the Taurus 24/7 Spring Air Soft Pistol. Delivering great accuracy from a realistic soft air pistol, the Taurus 24/7 delivers shot velocities of 315 fps. Magazine holds 25 soft air BB’s. Soft rubber grip provides added comfort.
Recoil Springs – Choose from factory weight, 5.5 pounds or extra power 6, 6.5 or 7 pound recoil springs. All include an extra power firing pin spring. Magazine Springs – 3-pak of 5% extra power magazine springs. Service Pack – 1 each of the factory standard springs: recoil spring, firing pin spring, extractor spring, slide lock spring, trigger bar spring, hammer spring, sear spring, magazine catch spring and takedown spring. SPECS: Spring steel. Fits all push-button, takedown models.
Kit contains (1) XP recoil spring, (1) XP firing pin spring, (1) RP hammer spring and (1) RP trigger spring. SPECS: RP = Reduced Power, XP = Extra Power, FSW = Factory Standard Weight.
All essential factory weight coil springs for a particular semi-auto pistol. No fitting required. Magazine spring not included. GLOCK 17/17L/20/21/22/24/31/34/35 – 9mm/.40S&W, #69541.
All essential factory weight coil springs for a particular semi-auto pistol. No fitting required. Magazine spring not included. GLOCK 19, 23, 32 – 9mm/.40 S&W – Kit #69542.
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
Designed for cleaning .223 service rifles and most .22 caliber handguns, these coated rods prevent metal-to-metal contact that can scratch the rifling and ruin accuracy. Spring steel rod with durable proprietary coating that resists solvents and abrasion for a lifetime of use. 22-CF-6 & 22-CF-9 have a 8-32 female threaded tip for use with all standard-size cleaning accessories. Includes brass cleaning loop. 22-C-30 has 8-36 male threaded tip that fits included jag, plus a separate 8-32 female threaded adapter for use with standard cleaning accessories. SPECS: Handle – molded polymer, 1¼” (3.2cm) dia., ball bearings. Rod – nylon coated spring steel, .21” (5.6mm) dia.
Designed for cleaning .223 service rifles and most .22 caliber handguns, these coated rods prevent metal-to-metal contact that can scratch the rifling and ruin accuracy. Spring steel rod with durable proprietary coating that resists solvents and abrasion for a lifetime of use. 22-CF-6 & 22-CF-9 have a 8-32 female threaded tip for use with all standard-size cleaning accessories. Includes brass cleaning loop. 22-C-30 has 8-36 male threaded tip that fits included jag, plus a separate 8-32 female threaded adapter for use with standard cleaning accessories. SPECS: Handle – molded polymer, 1¼” (3.2cm) dia., ball bearings. Rod – nylon coated spring steel, .21” (5.6mm) dia.
Two-piece, extended base pad replaces factory pad to increase magazine capacity without compromising reliability. Molded from impact-resistant, fiberglass-reinforced nylon to protect your magazine from damage when ejected onto hard ground or pavement. Checkered bottom panel assists in fast, positive, non-slip, mag changes. Locks securely to the magazine body and lets you retain the factory magazine spring. Removes quickly and easily to reinstall factory pad and return mag to original spec. Models for Springfield XD are also available with optional extra power magazine spring for added reliability. Smith & Wesson M&P model is supplied with parts to allow two attachment options. For low-stress SPECS: Fiberglass-filled nylon, black. Springfield XD models available with extra power, steel music wire magazine spring.
Two-piece, extended base pad replaces factory pad to increase magazine capacity without compromising reliability. Molded from impact-resistant, fiberglass-reinforced nylon to protect your magazine from damage when ejected onto hard ground or pavement. Checkered bottom panel assists in fast, positive, non-slip, mag changes. Locks securely to the magazine body and lets you retain the factory magazine spring. Removes quickly and easily to reinstall factory pad and return mag to original spec. Models for Springfield XD are also available with optional extra power magazine spring for added reliability. Smith & Wesson M&P model is supplied with parts to allow two attachment options. For low-stress SPECS: Fiberglass-filled nylon, black. Springfield XD models available with extra power, steel music wire magazine spring.
Simple, easy-to-use design lets you load pistol magazines quickly without dinging the feed lips and pinching your fingers, so you spend more precious range time shooting, less loading magazines. A real life saver for squeezing those last few rounds into mags with heavy springs. Slide the loader over the magazine and grasp both firmly as you repeatedly depress the ribbed, no-slip thumb lever to relieve the spring pressure and insert rounds. Depending on model, a slot or an adjustable stop in the loader’s base prevents movement of the magazine while loading. Models available to fit most Double Stack (DS) and Single Stack (SS) magazines. SPECS: Plastic, black. 451, 452, and GL-453 adjust to accommodate different size magazine bodies.Model 940 fits DS Browning High Power/BDM, CZ 75/85/99, Ruger P85/89/93/95, Sig P226/228/229, S&W .40 cal., Taurus .40 cal. PT100/101. Model GL-940 fits DS Glo
CAD designed and manufactured to aerospace specifications from chrome silicon or chrome vanadium for maximum durability, consistency and reliable performance. Built to aerospace specifications; heat treated, shot peened and fully stress relieved to minimize spring set. Chrome silicon (CS) flat springs available in reduced power 13 lb. and 15 lb. weights, and extra power 17 lb. Factory weight is 16 lb. SPECS: Chrome silicon flat wire.
CAD designed and manufactured to aerospace specifications from chrome silicon or chrome vanadium for maximum durability, consistency and reliable performance. Built to aerospace specifications; heat treated, shot peened and fully stress relieved to minimize spring set. Chrome silicon (CS) flat springs available in reduced power 13 lb. and 15 lb. weights, and extra power 17 lb. Factory weight is 16 lb. SPECS: Chrome silicon flat wire.
CAD designed and manufactured to aerospace specifications from chrome silicon or chrome vanadium for maximum durability, consistency and reliable performance. Built to aerospace specifications; heat treated, shot peened and fully stress relieved to minimize spring set. Chrome silicon (CS) flat springs available in reduced power 13 lb. and 15 lb. weights, and extra power 17 lb. Factory weight is 16 lb. SPECS: Chrome silicon flat wire.
Extra-strong extractor spring increases extractor’s grip on case groove and helps ensure reliable, complete extraction. Especially effective for improving reliability of an AR-15 style carbine, pistol, or short barreled rifle (SBR) where a weak extractor spring can cause extractor lift, leading to failure to fully extract the spent case before the fresh round is fed from the magazine, resulting in a stoppage. Heavy-grade, high-quality spring steel and a proprietary heat-treating process ensure long service life with less weakening over time than ordinary springs. SPECS: Tempered spring steel. Fits all AR-15/M16/M4-style rifles, carbines, and pistols.
Six position, length adjustable stock lets you determine length of pull and benefit from a shorter overall length when the tactical situation dictates. High strength, glass-filled nylon composite stock features a rubber buttpad with a slight negative angle for fast shouldering, especially when wearing body armor. Combat proven design includes an easy-to-operate, spring-loaded release lever for lightening quick adjustments. Cheekrest is adjustable 3/8″ up to provide correct eye alignment with optics for fast target acquisition. When in the full-down position, provides a very comfortable, streamlined stock that works perfectly with iron sights. Includes standard swivel base stud. Installatio SPECS: Glass-filled nylon, matte black. 7½” (19cm) long. 3-7⁄8″ (9.8cm) maximum extension. 10.3 oz. (292g) weight. Pistol Grip – 4¼” (10.8cm) long x 13⁄8″ (3.5cm) wide. 4.3 oz. (122g) weight. Installation requires receiver extension, locknut and end plate, recoil buffer and spring. In
5 hours, 3 VHS tapes. Covers installing fiber optic sights, checkering and serrating steel, fitting a bull barrel with an oversize slide, setting a 11⁄2 lb. trigger, installing an ambi safety, selecting the right finish, spring rates. VHS format only.
Based on the popular handgun, this realistic spring-powered pistol comes equipped with a precision laser sight and self-contained target with net system. Magazine capacity: 14 air soft BBs. Muzzle velocity: 210 fps. Manufacturer model #: 18365.
Lanyard coil secures your sidearm to your belt for worry-free retention during demanding tactical operations. Attaches to the lanyard opening with a metal S-clip that’s spring loaded closed so it won’t release unexpectedly. Tough, Cordura® loop wraps around belts up to 23/8″ wide and uses an extra large, hook-and-loop attachment setion for superior holding power. Can also be used to secure knives, cell phones, GPS units, radios, wallets, travel bags, and flashlights. Fits most handguns with lanyard opening; includes separate split ring for Sig Sauer® (optional for Glock®) installation. SPECS: Rubber covered, copper, 5-strand wire, matte black or coyote tan. Stainless steel S-clip. Length coiled – 18½” (47cm), length extended – 55” (140cm).
Lanyard coil secures your sidearm to your belt for worry-free retention during demanding tactical operations. Attaches to the lanyard opening with a metal S-clip that’s spring loaded closed so it won’t release unexpectedly. Tough, Cordura® loop wraps around belts up to 23/8″ wide and uses an extra large, hook-and-loop attachment setion for superior holding power. Can also be used to secure knives, cell phones, GPS units, radios, wallets, travel bags, and flashlights. Fits most handguns with lanyard opening; includes separate split ring for Sig Sauer® (optional for Glock®) installation. SPECS: Rubber covered, copper, 5-strand wire, matte black or coyote tan. Stainless steel S-clip. Length coiled – 18½” (47cm), length extended – 55” (140cm).
Folding buttstock reduces overall length by 10 inches to make your 10/22 easier to pack in the field or stow in a vehicle. Injection molded forend features raised checkering and finger grooves in the pistol grip for added control in all weather conditions. Beefy, buttstock pivot pin provides a positive, tight lockup with no “play” or looseness. Hinge includes a release button and uses a heavy duty spring and locking notches to securely hold the buttstock in the folded or open position. Clear, polymer tubing along the top of the buttstock frame prevents direct contact of cheek to metal surface. Hollow handle with rubber plug allows storage of small parts, cleaning supplies and other field nec SPECS: Forend – Synthetic polymer, black. Buttstock – Carbon steel or stainless steel. Approx. 2 lb. 4oz. (1.02kg) wt. Size Folded – 197⁄8″ (50.48cm) long, 3¼ “ (8.25cm) wide. Size Open – 29” (73.7cm) long, 2¼” (5.7cm) wide. 133⁄8″ (34cm) L.O.P.
Men’s BROOKS® DYAD 5 :: The men’s Brooks® Dyad 5 caters to our low-arch friends who belong in neutral running shoes. Cushion your feet to the max with new full-length MoGo®. Enjoy generous width and volume in a comfortable upper. 11.8 ounces…
Cushioning, guidance, and style come standard in this new shoe. Versatile enough to accommodate road rookies and veterans alike, it scores points for price and performance. And that makes it one switch you’ll never regret. Men’s BROOKS® SWITCH :: Cushioning and style come standard with the men’s Brooks® Switch running shoe with light stability for runners who need more guidance than a Neutral sh…
With a six-inch barrel and six cartridges per cycle like the actual revolver, the TSD Sports Spring Powered Airsoft Revolver has the look and feel of the real thing. Featuring Indiana Jones real scale style, heavy-duty construction with metal parts, Antishock ABS and a rotating cylinder system, the revolver has a great weight and feel. With single-shot hammer action and a spring-powered hop-up sys…
Smith and Wesson M4505 silver pistol is another one in the series of High Power Accurate pistols. The M4505 shoots 315 feet per second with .12g ammo and has a magazine capacity of 12 rounds….
33% glass-filled nylon with pebble-grain surface, provides secure handling in all weather conditions. Furnished with a complete set of adapters and spacers for installation on 12 ga. Mossberg 500, Maverick 88, Remington 870, and Winchester 1200/1300 pump shotguns. Easy to install, requires no modifications to firearm. Full length stock features a slim, finger-groove, pistol grip that’s ergonomically designed for maximum firing control. Forward angle comb prevents recoil from battering your cheek. A solid rubber recoil pad cushions against recoil shock. Includes rear sling swivel stud. Uses factory stock bolt. SPECS: Glass filled nylon, black. 14″ (35.6cm) length of pull.
Paper targets are NRA approved for 50 yard shooting for pistol. Silhouette style for USPSA/IPSC shooting with A, B, C and D zones. SPECS: Paper, 35″ (88.3cm) x 22″ (55.1cm) overall.
The Snug Rug Pistol Case is custom molded to surround your firearm and accessories with complete 360-degree protection. Keep your gear safe and secure from dirt, debris, scratches or shock with properly cut foam housings, strong nylon handles, and lockable zipper enclosure.
The Snug Rug Pistol Case is custom molded to surround your firearm and accessories with complete 360-degree protection. Keep your gear safe and secure from dirt, debris, scratches or shock with properly cut foam housings, strong nylon handles, and lockable zipper enclosure.
The Rifle and Pistol Gunnysock protects without bulk. Rifle Gunnysock stretches to over 5 feet long, wide enough for scoped rifles. Pistol Sock stretches to over 25″ long. SPECS: 75% acrylic, 25% nylon. Sold in packages of six only.
Drop-in replacement for factory buffer shortens stroke and reduces recoil on pistol caliber AR-15 conversions with collapsible M4 carbine-type stocks. Extra weight behind carrier reduces cyclic rate for improve controllability, feeding, and extraction on full-auto carbines. Self-contained unit with long head consists of long-wearing, precision-machined, cold-rolled Parkerized steel exterior, fully enclosed 8 oz. lead insert, and polyurethane bumper. Will not work with rifle caliber uppers. Installation of this buffer is mandatory on Cavalry Arms CAV-15 Mk II receivers converted to .45 ACP with the Hahn Precision Grease Gun Adapter to prevent receiver damage. SPECS: Cold-rolled steel exterior, Parkerized, matte dark gray; lead insert; polyurethane bumper. 3-11⁄16″ (9.4cm) long. Fits rifles and carbines with pistol caliber upper receiver and collapsible M4 carbine-type stock.
Drop-in replacement for factory pistol grip has sculpted, ergonomic contours designed to provide an exceptionally comfortable, secure grip that minimizes hand fatigue, enhances trigger control, and improves weapon handling during sustained rapid fire. Also helps reduce hand fatigue during long periods in the ready position. A wide, hand-filling palm swell and gently curved finger grooves provide plenty of support, while molded-in stippling and vertical grooves on the backstrap help you maintain a firm grip with wet hands. Sweeping, integral beavertail allows a high hand position for outstanding recoil control. Positive-locking trapdoor in the bottom opens to reveal a roomy internal storage c SPECS: Reinforced molded polymer composite, black. Fits rifles and carbines that accept standard AR-15/M16 pistol grips.
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar
Firepower Airsoft Laser Kit. Sharpen up your aim with this Laser Kit! It includes: Laser for super-fast dot sighting; Batteries; Mounting hardware; Mounting tool; Order Now! WARNING: You must be 18 or older to purchase Lasers. Lasers cannot be shipped to New York City; D.C.; MA; Canada or Puerto Rico. Lasers cannot be shipped Parcel Post. Please check your State, County and City laws for restricti…
“The ICU system is a system of mirrors that attach securely to the end of an airsoft gun or paintball marker. The mirrors are specifically curved, and turn your gun into a surveillance and targeting tool! No more peering your head around corners, exposing your face and body to your attackers. The mirrors do that for you, giving you a view of your enemy’s locations that can be undetectable. Communi…
airsoft pistol?
does anyone know were i can buy a airsoft pistol that u only need to cock once per round that goes at least 350 fps and is 50$ or less?
So you’re looking for a semi auto pistol, which means gas.
