Produce factory-like ammo with improved utility and accuracy with Lee Pacesetter Rifle Dies. Each comes with a full-length sizer, bullet seater and roll crimper, shell holder, factory crimp die, and powder dipper. NOTE: Dies for the .300 WSM (888-617-11), .444 MARLIN (888-616-10) and .45-70 GOV(888-616-11) do not come with a factory crimp die. The .444 MARLIN and .45-70 GOV come with an expanding die instead. The .300 WSM is a two-die set, containing the sizer die and bullet seater/roll crimper.
Harold R. Vaugh. 290 pages. 6½” x 10 ¼”. Softbound. Examines in detail a variety of gunsmithing and handloading issues that affect maximum accuracy from your rifle. Explains topics such as barrel-receiver joint motion, barrel vibration and rigidity, chamber and throat design, plus case neck tension and bullet imbalance.
RCBS Precisioneered Reloading Dies are for shooters who want reloads that deliver the same quality performance of their guns. Precision-drilled and reamed to the same exacting standards as the finest gun mechanisms, these dies feature the rigid specifications RCBS has developed over its 60+ years of die manufacturing. Find out why RCBS produces more reloading dies in more calibers (more than 3,300) than any other reloading die manufacturer. The RCBS Rifle Die Set features an expander-decapping unit to remove spent primer as it expands the case mouth. Built-in vent holes prevent case damage. Seater die includes a bullet seater plug and built-in roll or taper crimp for specific cartridges. Made of case hardened steel, every die is properly hardened and hand polished to withstand years and years of the abrasive type of wear caused by case sizing. Large, easy-to-adjust hex lock rings utilize hex head setscrews. Standard 7/8?-14 thread, unless otherwise noted. These full-length sizer dies also feature vents to prevent case damage caused by trapped air or excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. Shell holder not included. Features: Delivers top quality reloads Precision drilled and reamed to exacting RCBS standards Properly hardened and hand polished Standard 7/8”-14 thread Case hardened steel construction Built-in vents prevent damage from trapped air or excessive lubricant
A shell of abrasion- and mildew-resistant, 1000 denier, Nytaneon nylon surrounds 3⁄8″ of padding on the top and bottom of the case for snug, no-slip protection of your rifle and its expensive optics. Padding on the bottom of the case covers the zipper tracks to protect your rifle from scratches. A double-stitched, nylon carry handle is attached to the case with multi-reinforced stitching; an adjustable, padded sling offers a tactical-carry option. All cases accept rifles with mounted optics and fully unzip to be used as a shooting mat. Standard Rifle case is available in 34″, 37″, and 41″ lengths and features four high-capacity magazine pouches (five on 41″ case) with positive-c SPECS: 1000 denier, Nytaneon nylon, black.
Padded, soft-side case adjusts to fit the exact length of your rifle (up to 46″), with plenty of width to accommodate a fully tricked-out AR-15/M16/M4 rifle with a high-mounted optic and full-capacity 30-round magazine. Adjustable, padded shoulder straps of heavy-duty nylon webbing let you sling the cases over your back like a backpack for comfortable hands-free transport. Straps are positioned for proper weight distribution across your back and shoulders for maximum mobility and minimal fatigue. Adjustable, quick-release chest strap keeps the shoulder straps from slipping. Shoulder straps attach via spring-loaded clips to flat D-rings sewn to the case, so they can be removed completely and SPECS: 1000 denier Cordura® nylon shell, black or coyote. 48” (1.2m) approximate maximum extended length, 14” (35.6cm) wide, 4” (10.2cm) high.
Padded, soft-side case adjusts to fit the exact length of your rifle (up to 46″), with plenty of width to accommodate a fully tricked-out AR-15/M16/M4 rifle with a high-mounted optic and full-capacity 30-round magazine. Adjustable, padded shoulder straps of heavy-duty nylon webbing let you sling the cases over your back like a backpack for comfortable hands-free transport. Straps are positioned for proper weight distribution across your back and shoulders for maximum mobility and minimal fatigue. Adjustable, quick-release chest strap keeps the shoulder straps from slipping. Shoulder straps attach via spring-loaded clips to flat D-rings sewn to the case, so they can be removed completely and SPECS: 1000 denier Cordura® nylon shell, black or coyote. 48” (1.2m) approximate maximum extended length, 14” (35.6cm) wide, 4” (10.2cm) high.
You need to have 100% confidence that your gear won’t fail. That’s why Brownells built a case that will protect your rifle in the harshest operating conditions and give you added advantages. Three rows of MOLLE-compatible attachment points run the length of the case, letting you keep your gear with your rifle. A large, bellows-style front pocket includes a separate magazine pouch with MOLLE-compatible attachment points and three, separate, 30-round magazine compartments with hook-and-loop closures. (Additional pouches available separately, below.) A water-resistant 1000 denier, Cordura Plus nylon shell stands up to the toughest abuse. An outer layer of closed-cell foam and an SPECS: 1000 denier Cordura Plus nylon exterior, black, coyote tan, or O.D. green. 35” (89cm) long, 11” (28cm) wide, 2½” (6.4cm) high. Front Pocket – 10½” long, 8” (20.3cm) wide, 2” high. Double Rifle Case includes additional o
The closest thing to a perfect rifle hunting bullet you can buy! Starts with a 2-stage expansion design, then combines all the best-known ballistics technology into one bullet. 20 rounds per box.
Old Antique Historical Victorian Prints Maps and Historic Fine Art———-. 1904 Russian Weapon Gun Rifle Shell Bullet French Print Page And Reverse Side From An Issue 1904 L’Ilustration Published France. Size 15 X 11 Inches…
Definately a UNIQUE item. A nose & ear hair trimmer in the shape of a rifle bullet. Precision cutter safely removes unwanted nose hair & ear hair almost instantly. Great for ears, nose & eyebrows. Uses 1 AA (non-alkeline only) battery (not included). Small cleaning brush included…
If you are new to reloading let this new OCTOBER 14 2007 editon of this DVD be your guide to saving 50% or more on ammunition. You probably have a specific bullet or bullets you want to reload. For this video an RCBS Rock Chucker Master Reloading Kit was chosen as the press–because it is one of the most popular presses out there–that is, you can find the press and parts for it easily–as well as…
This awesome black enamel belt buckle features a row of three dimensional chrome and goldtone replica rifle shells across the front. The buckle measures 3 1/4 inches across and 2 1/8 inches tall, with a back loop capable of handling a snap belt up to 1 1/2 inches wide. It looks great with just about any style of outfit. Note, these are not real bullets, just replicas.This buckle is made with high …
Ammunition. Shell (projectile), List of rifle cartridges, List of handgun cartridges, Teflon- coated bullet, Hollow- point bullet, Full metal jacket bullet, Bullet, Cartridge (firearms), Expanding bullet, Lead shot, Tracer ammunition, Fuse (explosives), Proximity fuze, Tubes and primers for ammunition, Ammunition box, Explosive material, High explosive incendiary, Naval artillery…
How to remove jammed shell from rifle?
I have a M-44 rifle and i haven’t shot it in about 2 years. i cleaned abut 7 to 8 months ago and its been sittin on my gun shelf ever since. i got it out the other day to shoot it and the bullet i used was from a box that i havent used yet. i shot the gun but now i can’t get the chamber open. the empty shell is still in the gun but i can’t get it out, the gun is bolt action and i can’t get the bolt to open all the way. what do i do?
i already disassebled the gun but i stil can’t open the chamber, the safe is off, the bolt opens partially but thats it.
This is called “Sticky Bolt Syndrome” and it is extremely common on Mosins.
First off, using extreme care you need to get the bolt open. Pointing it in a SAFE direction, use a small block of wood and a hammer, have a friend hold the rifle and knock it open.
Next, follow the detailed instructions to solve this problem for the future.
Pen ballpoint hunter rifle bullet shell Ford Look at ebay item #380151011252
The folks at GameGuard see about as much use in hunting the Southwest in mossy green camo as riding a mule in the Kentucky Derby. Designed by people that live in the Southwest, GameGuard?s unique camo pattern is the result of a year’s work to perfectly emulate the subtle tans, taupes, browns, and muted greens found in the Southwest. This hunting apparel and gear helps you blend in when you are hunting arid areas filled with brush, cactus, yucca, and cedar, instead of oak and maple. Created by hunters, GameGuard products are packed with innovative and functional features that make a difference when you are sneaking over open high desert ground toward game. Inspired by the rugged beauty of the great Southwest, GameGuard is designed to enhance your cover where you hunt! Complete your concealment in cool weather with these camo Cotton Gloves from GameGuard. These lightweight cotton gloves feature GameGuard’s specialized Southwest-themed camo pattern and a knobby palm for an excellent grip. Wide elastic cuffs help keep gloves in place. One size fits most. Imported. Features: Lightweight cotton gloves GameGuard camo on exterior Knobby palm for great grip Wide elastic cuffs for secure fit One size fits most
This set features leather ear cups with comfortable ProForm padding for all day use and rugged Dielectric construction. The adjustable headband provides a one-size-fits-all use. Ideal for general shooting, hunting or increased noise environments. Note: The manufacturer recommends using both ear plugs and these earmuffs for intense noise settings or extended use. SPECS: Noise reduction: 26dB, Weight: 7.1 oz. Passive functionality, slim profile, leather ear cushions, adjustable headband. 1 year warranty. Available colors: Green, Pink, Pink Real Tree Camo, Natural Gear Camo and Advantage Max 4 HD Camo.
Rugged and comfortable caps boldly embroidered with “Brownells” and our motto Selection. Service. Satisfaction® on the front, and our Ram logo on the back. Six-panel, brushed cotton construction provides comfort and long-lasting strength and has six sewn eyelets for breathability. Contours comfortably to your head without losing shape and the pre-formed bill has just the right amount of “bend” in it. Adjustable Velcro strap makes fitting easy and convenient. Available in blaze orange, Real Tree camo, and khaki gray and comes with the Brownells Mil/LE logo stitched on the front, these hats are the perfect addition to your next hunting trip, day a the range, or a drive around town. SPECS: Brushed cotton. One size fits most; adjustable, velcro strap.
Quality fixed blade hunting knife with camo rubber handle Durable full tang construction 3.8” clip point 7Cr17 stainless steel blade Ergonomic finger slots in handle for sure grip Camo nylon sheath Enjoy sure handling and concealment from a quality hunting knife with the RedHead Camo Fixed Blade Hunting Knife. This quality knife is built around a full-tang clip point blade forged from 7Cr17 stainless steel with a matte finish. The sure grip rubber handle features an ergonomic design for a sure grip and a camo finish for great concealment when stowed in its camo nylon sheath (included). Blade length: 3.8”. Overall length: 8.6”. Weight: 7.2 oz.
Conceal your tree stands, boats, blinds, ATV, or any other solid colored hunting location or accessory with this handy permanent camo paint kit from the hunting experts at Hunter’s Specialties. Kit includes four 12-oz. aerosol cans (1 each of mud brown, flat black, marsh grass, and olive drab), instructions and leaf stencil for superior realism and concealment. Long-lasting, easy to use, all purpose enamel paint sticks to most surfaces. Made in USA. Features: Makes it easy to camouflage a stand, boat, blind, or other solid colored hunting accessory Four 12 oz aerosol cans of permanent enamel paint Includes mud brown, flat black, marsh green, and olive drab Kit comes with leaf stencil for superior realism and concealment Easy to use enamel paint sticks to most surfaces Manufacturer model #: 00320.
Outfit your hunting/fishing boat with a fresh new camouflage look with these high-quality Camo Boat Seats from Wise. Designed to deliver long-lasting and stealthy comfort, these Camo Hunting/Fishing Boat Seats feature a molded plastic frame and resilient, shock-absorbing padding covered with durable 1000 Denier Cordura nylon upholstery. Plus, the seats are equipped with heavy-duty, no-pinch aluminum hinges for hassle-free fold-down. Dimensions: 18.5”H x 16”W x 16”D. Imported. Swivel not included.
Comfortable camo hunting cap with bold 3-D embroidered Buckmark logo Six panel cap with adjustable, hook ‘n’ loop closure Browning logo embroidered across closure strap on back 60/40 cotton/poly blend Perfect for hunting or just enjoying the outdoors on the weekend, the Browning Camo Hunting Cap with 3-D Buckmark Logo makes it clear which company you trust when heading into the woods. This 60/40 cotton/poly blend, six panel hat features a 3-D Browning Buckmark logo embroidered across the middle of the front two panels with the Browning logo embroidered across the closure strap on the back of the cap. Cap delivers a perfect, customized fit thanks to its adjustable hook and loop closure. Color: Mossy Oak Break-Up Infinity . One size fits most. Imported.
Features: Versatile for female hunters Breathable Microfiber poly/cotton blend Convertible design unzips for instant shorts when the heat rises Slightly lowered waist Lightweight and virtually wrinkle-free Enjoy exceptional comfort, breathability, and versatility from a pair of hunting pants with the GameGuard Convertible Microfiber Hunting Pants for Ladies. Built specifically for female hunters, these convertible pants feature a slightly lowered waist and, with the convertible legs, change into shorts in the blink of an eye. Made with Microfiber polyester/cotton blend, these pants are lightweight and virtually wrinkle-free. So be ready when the mercury rises while you are out on a hunt, enjoy maximum comfort and flexibility while hunting with the Convertible Microfiber Hunting Pants from GameGuard. Color: GameGuard Camo. Imported. The folks at GameGuard see about as much use in hunting the Southwest in mossy green camo as riding a mule in the Kentucky Derby. Designed by people that live in the Southwest, GameGuard?s unique camo pattern is the result of a year’s work to perfectly emulate the subtle tans, taupes, browns, and muted greens found in the Southwest. This hunting apparel and gear helps you blend in when you are hunting arid areas filled with brush, cactus, yucca, and cedar, instead of oak and maple. Created by hunters, GameGuard products are packed with innovative and functional features that make a difference when you are sneaking over open high desert ground toward game. Inspired by the rugged beauty of the great Southwest, GameGuard is designed to enhance your cover where you hunt! Manufacturer model #: PM2000
Whether in the shooting range, in the field, or in the workshop, the Pro Ears Ultra 33 Passive Earmuffs provide complete protection with outstanding comfort. The rugged design features Dielectric construction, thick padded leather ProForm ear cushions and adjustable headband. This set is perfect for any high noise environment as well as long gun, shotgun, and general hunting purposes. SPECS: Noise reduction rating of 33 dB, Weight: 11.4 oz. Passive functionality, high profile cups, leather ear seals, viso-elastic foams. 1 year warranty. Available colors: Green, Pink and Pink Real Tree Camo.
High pigment density, ideal for one-coat coverage of fiberglass stocks, shotguns, rifles, handguns, duck blinds, boats and more. Fast-drying enamel goes on easily; just remove all dirt, grease, oil or rust from surfaces first. SPECS: 12 fl. oz. (354.7ml) aerosol cans.
High pigment density, ideal for one-coat coverage of fiberglass stocks, shotguns, rifles, handguns, duck blinds, boats and more. Fast-drying enamel goes on easily; just remove all dirt, grease, oil or rust from surfaces first. SPECS: 12 fl. oz. (354.7ml) aerosol cans.
Truck is 12” and features a rugged camo design Includes action figure, ATV, campfire and more Ages three and up You’ve got all the power you need to fuel the hunt with our Bass Pro Shops? Ford F-250 Camo Hunting Adventure Set. The 12″ truck is wrapped in Mossy Oak? Break-Up? Infinity? detail camo and features the Bass Pro Shops logo. This fun adventure set allows your young hunter to get back in the woods where the big bucks live. Includes action figure, deer, rifle, binoculars, ATV, cot, campfire, and tent. This Ford F-250 Camo Hunting Adventure Set will inspire a love for the outdoors and makes a great gift!
Features: Ultra durable, high performance short sleeve hunting shirt 100% cotton Rip-Stop performance fabric construction Double stitching on all major seams Button down collar Large chest pockets with button down flaps One chest pocket features a bellows expander Center-back pleat for ease of motion GameGuard camo pattern A favorite of demanding hunters, the GameGuard Rip-Stop Short Sleeve Hunting Shirt gives you GameGuard’s special Southwest themed camo on a high performance, ultra durable hunting shirt. Built to last, this shirt is made of 100% cotton Rip-Stop performance fabric with double stitching on all major seams. Shirt features a button-down collar, large chest pockets with button-down flaps (one with a bellows expander), and a center-back box pleat for unrestricted movement. Color: GameGuard camo. Imported. Manufacturer model #: RHS420 The folks at GameGuard see about as much use in hunting the Southwest in mossy green camo as riding a mule in the Kentucky Derby. Designed by people that live in the Southwest, GameGuard?s unique camo pattern is the result of a year’s work to perfectly emulate the subtle tans, taupes, browns, and muted greens found in the Southwest. This hunting apparel and gear helps you blend in when you are hunting arid areas filled with brush, cactus, yucca, and cedar, instead of oak and maple. Created by hunters, GameGuard products are packed with innovative and functional features that make a difference when you are sneaking over open high desert ground toward game. Inspired by the rugged beauty of the great Southwest, GameGuard is designed to enhance your cover where you hunt!
Offer outstanding hearing protection as well as crystal clear sound amplification with the Radians Hunters Ears. This set features dual independent high frequency directional microphones to pick up ambient frequencies while automatically compressing harmful impulse sounds to a safe range below 85 dB without clipping or cutting. Enjoy the comfort of the padded Cool Max headband that actually moves moisture away from the head. Take this headset anywhere as the compact folding feature makes for quick and easy storage. SPECS: NRR 23, Folding feature, Cool Max headband, Color: Realtree HW Green Camo.
The folks at GameGuard see about as much use in hunting the Southwest in mossy green camo as riding a mule in the Kentucky Derby. Designed by people that live in the Southwest, GameGuard?s unique camo pattern is the result of a year’s work to perfectly emulate the subtle tans, taupes, browns, and muted greens found in the Southwest. This hunting apparel and gear helps you blend in when you are hunting arid areas filled with brush, cactus, yucca, and cedar, instead of oak and maple. Created by hunters, GameGuard products are packed with innovative and functional features that make a difference when you are sneaking over open high desert ground toward game. Inspired by the rugged beauty of the great Southwest, GameGuard is designed to enhance your cover where you hunt! Scaled down to fit the next generation of hunters, the GameGuard Rip-Stop Long Sleeve Hunting Shirt for Youth delivers the same exceptional Rip-Stop durability and GameGuard performance as the adult version. This quality hunting shirt combines GameGuard’s special Southwest themed camo with ultra durable 100% cotton Rip-Stop performance fabric put together with double stitching on all major seams. Shirt features a button-down collar, large chest pockets with button-down flaps (one with a bellows expander), and a center-back box pleat for unrestricted movement. Color: GameGuard camo. Imported. Features: Ultra durable, high performance long sleeve hunting shirt for young outdoorsmen 100% cotton Rip-Stop performance fabric construction Double stitching on all major seams Button down collar Large chest pockets with button down flaps One chest pocket features a bellows expander Center-back pleat for ease of motion Manufacturer model #: YRHL4500
This set features leather ear cups with comfortable ProForm padding for all day use and rugged Dielectric construction. The adjustable headband provides a one-size-fits-all use. Ideal for general shooting, hunting or increased noise environments. Note: The manufacturer recommends using both ear plugs and these earmuffs for intense noise settings or extended use. SPECS: Noise reduction: 26dB, Weight: 7.1 oz. Passive functionality, slim profile, leather ear cushions, adjustable headband. 1 year warranty. Available colors: Green, Pink, Pink Real Tree Camo, Natural Gear Camo and Advantage Max 4 HD Camo.
Uncommonly lightweight for a 100% snakeproof, the RedHead Ultra Snake 13″ Waterproof Hunting Boot for Ladies gives you complete concealment with protection from snakes. The Ultra Snake features flex notches positioned behind the ankle to eliminate stiffness. A speed lacing system with ankle lace-lock allows for custom fitting in a hurry, with separate tensions above and below the ankle to deliver a strong and secure fit. The exceptionally comfortable and durable 900 denier Cordura upper gives you maximum toughness and survivability with all over Realtree Hardwoods Green HD for complete concealment. 100% waterproof construction. 56 oz. per pair. Imported. Features: Comfortable, waterproof, lightweight protection from snakes Durable 900 denier Cordura upper All over Realtree Hardwoods Green HD camo for complete concealment Flex notches behind ankle eliminate stiffness Speed lacing system Only 56 oz. per pair
High pigment density, ideal for one-coat coverage of fiberglass stocks, shotguns, rifles, handguns, duck blinds, boats and more. Fast-drying enamel goes on easily; just remove all dirt, grease, oil or rust from surfaces first. SPECS: 12 fl. oz. (354.7ml) aerosol cans.
High pigment density, ideal for one-coat coverage of fiberglass stocks, shotguns, rifles, handguns, duck blinds, boats and more. Fast-drying enamel goes on easily; just remove all dirt, grease, oil or rust from surfaces first. SPECS: 12 fl. oz. (354.7ml) aerosol cans.
Arguably the finest overall snake boot package a hunter can take with him in the field, the RedHead Ultra Snake 16” Waterproof Hunting Boots for Men is uncommonly lightweight for a 100% snakeproof boot. This rugged pair of boots utilizes a 900 denier Cordura upper for maximum toughness and survivability, with all-over camo for complete concealment. Flex notches behind the ankle eliminate the stiffness you often have with many snake boots. The Ultra Snake’s speed lacing system delivers additional comfort and quick and easy on/off. Ankle lacelock allows for custom fitting in a hurry, providing separate tensions above and below the ankle give the wearer a strong and secure fit. 100% waterproof construction. Comes with a removable orthotic arch support. Color: Realtree Hardwoods Green HD . Imported. Features: Uncommonly lightweight 100% snakeproof protection 900 denier Cordura upper 100% waterproof construction All over camo for complete concealment Flex notches behind the ankle eliminates stiffness Speed lacing system with ankle lacelock – separate tensions above and below ankle for great fit Removable orthotic arch support Our pros recommend the RedHead? Snake Sock with this boot. Click here!
Camo decorative yet functional Nightlight. This product is resin based. Single switch and uses 7 watt standard bulb that’s included. For inside use only. UL listed…
This is a cute extra large camouflage clock (18″). The base of the clock is made out of 1/2 inch hard composite wood. Because it is nice and thick it does not feel cheap and flimsy like many children’s clocks. The printed face is fused to the base of the clock. The mechanism has a three year warranty and is especially made to be almost silent. If the ticking sound of clocks annoys you when you are…
This is a Camera, & Cell Phone Holder. This has three pouches. Two have a Velcro Flap and One Zips Closed. The First Velcro Flapped Pouch Measures 4 1/2″x 2 1/2″ x 1 1/2″. The Second Pouch Measures 4 1/2″ x 2″ x 1 1/2″. The Zipper Pouch Measures 4 1/8″ x 1/2″ x 1/2″….
This is a Camera, & Cell Phone Holder. This has three pouches. Two have a Velcro Flap and One Zips Closed. The First Velcro Flapped Pouch Measures 4 1/2″x 2 1/2″ x 1 1/2″. The Second Pouch Measures 4 1/2″ x 2″ x 1 1/2″. The Zipper Pouch Measures 4 1/8″ x 1/2″ x 1/2″….
Mossy oak new break up
Realtree green hd
or
realtree ap hd
any camo is fine, the deer will not be seeing all the “details” that are designed more for hunters…..stand back 30 yards from the clothing stand and look at the camo….how many details do you notice?
You would be better to look for quality of the materials and how they are put together, whether or not you want gore-tex….
A strong, waterproof, nonreflective tape for secure but temporary attachment of pressure switches or as camo to break up your gun’s silhouette. Use to tape down zippers, swivels, straps and other sources of noise that could give away your position during stealthy operations. Has a thousand and one other uses in the field, in the armory, or on your workbench. This is vinyl-coated, high thread count cloth tape, not cloth reinforced vinyl “duct” tape. Tears off the roll clean and straight. High-tack, synthetic rubber adhesive won’t leave behind sticky residue and provides excellent adhesion and conformability over a wide temperature range. 42 lb. per inch tensile strength means this tape won’t SPECS: Vinyl coated cotton cloth, synthetic rubber resin adhesive. 1” (2.5cm) wide, 180’ (55m) long, .001” (12 mil) thick. Available in Black and Coyote Brown.
The A.R.M.S. Tactical Ring Cap is used with the #21, #22 and #35 Ring Saddles. Where standard use of a cap only holds a scope in position, this accessory expands its use by accepting modular enhancements of various conventional optics, simply by allowing the removal of the standard cap and installation of the tactical cap, using the same socket head screws. It features a rugged, stable construction and non-reflective black finish. Specs: Fits #21,22, and 35 Ring Saddles, Black finish
Durable tactical slings provide a wide variety of comfortable carry options while ensuring rapid, smooth transitions to a shooting stance. These slings are manufactured from durable, mil-spec materials, featuring close-weave nylon webbing, heavy-duty 800-lb. tensile strength elastic, double stitching and shockproof polymer hardware that won’t rattle or rust. Quick-release buckles can be disengaged with one hand, and tri-glide slip locks let the operator adjust overall length quickly for rapid shifts from strong side to support side and back. A-Tac – Single-point sling fits any weapon that accepts an HK-type snap hook. Provides maximum range of weapon movement SPECS: Mil-spec nylon webbing, polymer hardware, black.
Modular sling can be configured for single- or two-point attachment so you can change your carry mode for each mission. Designed for convenient integration with Tapco’s Intrafuse modular rifle furniture, this sling works with common sling attachment systems on today’s tactical rifles. Configure with the included Y-adapter and HK-style snap hook for single-point carry that allows fast transition from one shoulder to the other. Snap on the strap modules and thread the straps through 1¼" sling loops to configure for traditional, two-point carry for maximum comfort and stable weapon retention. Made with ultra-thin, yet exceptionally strong, military-grade nylon webbing SPECS: Nylon webbing, molded polymer hardware, steel snap hook, black. Kit includes main sling body, two strap attachment modules, Y-attachment harness, and HK-style snap hook module.
The A.R.M.S. #22 TRR Tactical Ring Rail allows the mounting of devices to the top of a scope ring. It offers an additional base to scoped rifles for the mounting of other equipment and accessories such as lights, lasers, or auxiliary sighting devices. This mount requires the use of the #22 Tactical Ring Cap and is compatible with #22M68 spacers for additional height when using optics with tall elevation adjustment knobs. Comes complete with two mounting screws. Specs: Ring Rail mounting base, Black finish, Mounting screws included.
The TDP-1 (Tactical Defense Pen) offers style and versatility with a compact and elegant design. It was crafted with military and law enforcement in mind and features a pointed end for defense applications and a blunt opposite end for control situations. It is manufactured from aircraft grade aluminum with type 3 anodizing for a sleek look and rugged durability. It also offers a smooth ink flow and is comfortable in the hand. Allen Elishewitz who is known as a world class knifemaker and designer, has spent most of his life practicing martial arts and trained in several countries. It is this background that enabled him to design the proper tactical defense pen for extreme situations. SPECS: Length: 5.25 inches, Finish: Type 3 anodization, Thickness: 0.450 inches, Includes pocket clip.
Extreme-duty, tactical sling withstands the rigors of military, law enforcement, and other tactical operations while maintaining the high level of comfort and mobility associated with leather. Based on the 1907 Military sling that’s still one of the finest slings ever invented for carry and shooting. Adjustable, 1¼” wide, BioThane® strap provides superior strength and weather-resistance; won’t crack, peel, or become stiff in frigid temperatures. Specially tempered, non-slip, urethane coating eliminates “break-in” time; flexes like leather, yet is impervious to sweat and water. The extra-tough, steel hooks are the same ones we use on our famous, Competitor Plus™ sli SPECS: Strap/Keepers – BioThane; black, brown, or O.D. green. 1¼” (3.2cm) wide. Hooks – Steel, parkerized finish w/brass rivets .108″ (2.75mm) thick.
Coil-cord lanyard keeps your weapon with you in the field. Fully adjustable belt loop plus a side release buckle that’s easily removed with one hand. Loop easily attaches to the lanyard loop in the sidearm, including the small loop in SIG weapons. Lanyard has a breaking strength of approximately 85 pounds to prevent serious user injury if weapon becomes entangled. Can also be used on radios, hand-held power tools, cameras, etc. SPECS: Nylon, polypropylene, plastic. NSN# 8465015225352 Length coiled – 22″ (56cm), length extended – 55” (140cm). Black, Coyote (tan) or Army Foliage Green.
Oversized bolt knob is easy to grab for quick, unencumbered bolt cycling on tactical and benchrest rifles. Features a tapered, palm-fitting design for additional leverage when clearing hard to remove stuck shells. CNC machined from lightweight aluminum and finished with Brownells Gun-Kote™. Installation requires threading of original bolt handle. Available in matte black, matte green, and natural finish. SPECS: 6061 T6 aluminum, matte black, matte green, or natural finish. 1-17⁄32″ (3.9cm) long, .990″ (25.2mm) diameter. 1.3 oz. (35 g) weight. Gunsmith installation recommended.
Oversize diameter and extended length and give positive bolt control for fumble-free cycling of tactical and benchrest rifles. No more holding the bolt handle with two fingers to clear the scope bell. Provides additional leverage needed to clear stuck rounds. Lightweight aluminum keeps weight down. Installation requires machining and threading of original bolt handle. SPECS: 7075 T6 aluminum alloy, hardcoat anodized, matte black, gloss red, gloss green, or gloss blue finish. 1½” (4cm) long, .975″ (24.7mm) diameter. 1.3 oz. (35 g) weight. Gunsmith installation recommended.
Machined steel, extended tactical choke with large diameter bore provides extra wide patterns at close range for home defense or CQB operations. Features a serrated, saw-tooth tip that holds tight against locks and hinges to prevent the muzzle from sliding during forced entry operation. Twelve, equally spaced ports redirect combustion gases to reduce felt recoil and prevent barrel damage when used for forced entry. Knurled gripping surface makes it easy to install and remove the choke without special tools. Precision machined from 1704 stainless steel for maximum strength, then treated with a manganese phosphate finish for improved wear resistance. Models available for Mossberg 835/935, W SPECS: 1704 stainless steel, manganese phosphate finish, matte black. Fits 12 gauge only.
Machined steel, extended tactical choke with large diameter bore provides extra wide patterns at close range for home defense or CQB operations. Features a serrated, saw-tooth tip that holds tight against locks and hinges to prevent the muzzle from sliding during forced entry operation. Twelve, equally spaced ports redirect combustion gases to reduce felt recoil and prevent barrel damage when used for forced entry. Knurled gripping surface makes it easy to install and remove the choke without special tools. Precision machined from 1704 stainless steel for maximum strength, then treated with a manganese phosphate finish for improved wear resistance. Models available for Mossberg 835/935, W SPECS: 1704 stainless steel, manganese phosphate finish, matte black. Fits 12 gauge only.
Injection-molded, reinforced, polymer-resin mount makes it easy to use your flashlight in tactical situations. Screw-adjustable, radiused pads hold light tightly in place; push-button locking system gives quick attachment and removal. Use on AR-15/M16, Glock, Sig, and Smith & Wesson guns equipped with Picatinny or Weaver-style rails. FAS2 Mount accepts Surefire® lights; FAS3 Mount accepts Scorpion® lights. SPECS: Polymer, black. 1¾” (4cm) long, 1¾” (4cm) high, 1¼” (3.2cm) wide. FAS2 Mount – 1-1⁄16″ (2.7cm) I.D; FAS3 Mount – 3-1⁄32″ (25mm) I.D. BK 1 Mount – Polymer, green 1-7⁄8″ (4.7cm) long. 1-5⁄8″ (4.1cm) high. .75″ (1.9cm) I.D.
Injection-molded, reinforced, polymer-resin mount makes it easy to use your flashlight in tactical situations. Screw-adjustable, radiused pads hold light tightly in place; push-button locking system gives quick attachment and removal. Use on AR-15/M16, Glock, Sig, and Smith & Wesson guns equipped with Picatinny or Weaver-style rails. FAS2 Mount accepts Surefire® lights; FAS3 Mount accepts Scorpion® lights. SPECS: Polymer, black. 1¾” (4cm) long, 1¾” (4cm) high, 1¼” (3.2cm) wide. FAS2 Mount – 1-1⁄16″ (2.7cm) I.D; FAS3 Mount – 3-1⁄32″ (25mm) I.D. BK 1 Mount – Polymer, green 1-7⁄8″ (4.7cm) long. 1-5⁄8″ (4.1cm) high. .75″ (1.9cm) I.D.
Injection-molded, reinforced, polymer-resin mount makes it easy to use your flashlight in tactical situations. Screw-adjustable, radiused pads hold light tightly in place; push-button locking system gives quick attachment and removal. Use on AR-15/M16, Glock, Sig, and Smith & Wesson guns equipped with Picatinny or Weaver-style rails. FAS2 Mount accepts Surefire® lights; FAS3 Mount accepts Scorpion® lights. SPECS: Polymer, black. 1¾” (4cm) long, 1¾” (4cm) high, 1¼” (3.2cm) wide. FAS2 Mount – 1-1⁄16″ (2.7cm) I.D; FAS3 Mount – 3-1⁄32″ (25mm) I.D. BK 1 Mount – Polymer, green 1-7⁄8″ (4.7cm) long. 1-5⁄8″ (4.1cm) high. .75″ (1.9cm) I.D.
Sturdy, machined aluminum creates extra strong, long-lasting grips that withstand years of hard, tactical use. Checkering features unique, smooth-top diamonds with square edges for a very comfortable and secure grip that won’t drag on clothing and gives you a firm grip for a positive draw in tactical and competition situations. Half grip pattern creates an distinctive, eye catching look that is fully functional and comfortable.Overall dimensions as well as screw holes, and safety cutout are CNC precision machined. SPECS: Aluminum, anodized. Full Size grips fit Govt/Commander. 4-1⁄8″ (10.5cm) long, approximately ¼” (6.7mm) thick. Compact grips fit Officers model. 3-1⁄8″ (7.9cm) long, approximately ¼” (6.7mm) thick.
Eliminate nicks, dings, and damage that impair the performance and tarnish the appearance of tactical weapons with our Signature Series Gun Cases. We combined the very best materials – 1000 denier CorduraEliminate nicks, dings, and damage that impair the performance and tarnish the appearance of tactical weapons with our Signature Series Gun Cases. We combined the very best materials – 1000 denier Cordura® nylon, YKK zippers, closed-cell foam padding – with your ideas to create what we feel is the ultimate line of gun cases anywhere. Plus, they look amazing . . . like anything we put our name on, you know these are top-of-the-line.All the structural and performance features to meet and exceed the stringent demands of today’s military and law enforcement personnel. and civilian AR-15 shooters. Heavyweight shell resists punctures and snags, repels moisture, and blocks micro-fine part SPECS: 1000 denier, Cordura nylon exterior, black. 38” (96.5cm) or 46” (116.8cm) long, 12” (30.5cm) wide at buttstock, 5” (12.7cm) wide at muzzle, 3” (7.6cm) thick. Pocket – 19½” (49.5cm) long, tapered 3½” (8.9cm) to 8½” (21.6cm) high.
Four, socket-head, cap screws lock scope into rings and prevent slipping from heavy recoil. One-half inch wide to provide excellent support for heavy, tactical, and long-range scopes. Accepts scopes with 30mm diameter tubes. Clamping nut makes it easy to tighten ring to base to a specific torque setting. Low Rings – Machined from steel bar stock, .266″ high. High Rings – High-strength aluminum keeps weight to a minimum, .873″ high. SPECS: 4140 steel, parkerized, matte black or 6061-T6 aluminum, anodized, matte black. Heights measured from top of base to bottom of ring. Low: .330″ (8.4mm). High: .930″ (23.6mm).
When you have to cycle the charging handle quickly, you need to be able to find it easily. 5/8″ square steel pad extends 13/16″ from the charging handle, providing an easy-to-find surface that helps you cycle the bolt quickly when seconds count. Replaces existing charging handle with no gunsmithing and no modifications to the rifle. SPECS: Aluminum charging handle, steel tactical latch, matte black. Tactical latch pad is 5/8″ (15.8mm) square and extends 13/16″ (20.6mm) from charging handle.
Durable tactical slings provide a wide variety of comfortable carry options while ensuring rapid, smooth transitions to a shooting stance. These slings are manufactured from durable, mil-spec materials, featuring close-weave nylon webbing, heavy-duty 800-lb. tensile strength elastic, double stitching and shockproof polymer hardware that won’t rattle or rust. Quick-release buckles can be disengaged with one hand, and tri-glide slip locks let the operator adjust overall length quickly for rapid shifts from strong side to support side and back. A-Tac – Single-point sling fits any weapon that accepts an HK-type snap hook. Provides maximum range of weapon movement SPECS: Mil-spec nylon webbing, polymer hardware, black.
Durable tactical slings provide a wide variety of comfortable carry options while ensuring rapid, smooth transitions to a shooting stance. These slings are manufactured from durable, mil-spec materials, featuring close-weave nylon webbing, heavy-duty 800-lb. tensile strength elastic, double stitching and shockproof polymer hardware that won’t rattle or rust. Quick-release buckles can be disengaged with one hand, and tri-glide slip locks let the operator adjust overall length quickly for rapid shifts from strong side to support side and back. A-Tac – Single-point sling fits any weapon that accepts an HK-type snap hook. Provides maximum range of weapon movement SPECS: Mil-spec nylon webbing, polymer hardware, black.
Multiple light source, optical sight makes sure the chevron reticle is always illuminated for reliable target engagement. Integrated fiber optic system automatically adjusts brightness to match light conditions. In total darkness, tritium-illumination provides a distinct aiming point. Battery backup system lets you set reticle brightness for tactical entry and critical, low-light situations. Features fifteen day and five night vision settings, auto shut-off and push button controls. Reticle is 14.4 MOA tall and 16.6 MOA wide, equals standard military silhouette at 100 meters to help determine range. 30mm tube, includes Weaver-style mounting rings. Sealed against dust, and SPECS: Aluminum body, black, matte finish. 5¼” (13.3cm) long. 4.7 oz. (132 g) wt. Uses (2) CR1/3N lithium batteries. Includes (4) batteries, LensPen, Scopecoat, 30mm mounting ring, fiber optic cover, and hard carry case.
Modular sling can be configured for single- or two-point attachment so you can change your carry mode for each mission. Designed for convenient integration with Tapco’s Intrafuse modular rifle furniture, this sling works with common sling attachment systems on today’s tactical rifles. Configure with the included Y-adapter and HK-style snap hook for single-point carry that allows fast transition from one shoulder to the other. Snap on the strap modules and thread the straps through 1¼" sling loops to configure for traditional, two-point carry for maximum comfort and stable weapon retention. Made with ultra-thin, yet exceptionally strong, military-grade nylon webbing SPECS: Nylon webbing, molded polymer hardware, steel snap hook, black. Kit includes main sling body, two strap attachment modules, Y-attachment harness, and HK-style snap hook module.
You keep both hands free while the sling holds rifles, shotguns or tactical weapons close to the body, out of the way. Strong, 3/8″ diameter, woven-covered, super bungee cord easily stretches up to 250% of its original length as you bring the weapon to bear. Nothing to wear out or maintain; attaches to sling studs with split rings, no swivels or buckles to snag on clothing or uniforms. SPECS: High-strength bungee. 3/8″ (9.5cm) diameter, black nylon cover. Steel split rings, black finish. Rifle – 45″ (114cm), Shotgun – 39″ (99cm), Tactical – 35″ (89cm) long.
Eliminate nicks, dings, and damage that impair the performance and tarnish the appearance of tactical weapons with our Signature Series Gun Cases. We combined the very best materials – 1000 denier Cordura® nylon, YKK zippers, closed-cell foam padding – with your ideas to create what we feel is the ultimate line of gun cases anywhere. Plus, they look amazing . . . like anything we put our name on, you know these are top-of-the-line.All the structural and performance features to meet and exceed the stringent demands of today’s military and law enforcement personnel. and civilian AR-15 shooters. Heavyweight shell resists punctures and snags, repels moisture, and blocks micro-fine part SPECS: 1000 denier, Cordura nylon exterior, black. 38” (96.5cm) or 46” (116.8cm) long, 12” (30.5cm) wide at buttstock, 5” (12.7cm) wide at muzzle, 3” (7.6cm) thick. Pocket – 19½” (49.5cm) long, tapered 3½” (8.9cm) to 8½” (21.6cm) high.
Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1″ and 30mm Tactical Rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, Tactical Bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 2 SPECS: Rings: Steel, matte black, powder coat finish. Medium – .375″ (9.5mm) high. High – .525″ (13.3mm) high. Extra-High – .650″ (16.5mm) high. Ultra-High – .935″ (23.7mm) high. Bases: 12L 14 steel, matte black, powder coat finish. Available in s
Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1″ and 30mm Tactical Rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, Tactical Bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 2 SPECS: Rings: Steel, matte black, powder coat finish. Medium – .375″ (9.5mm) high. High – .525″ (13.3mm) high. Extra-High – .650″ (16.5mm) high. Ultra-High – .935″ (23.7mm) high. Bases: 12L 14 steel, matte black, powder coat finish. Available in s
Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1″ and 30mm Tactical Rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, Tactical Bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 2 SPECS: Rings: Steel, matte black, powder coat finish. Medium – .375″ (9.5mm) high. High – .525″ (13.3mm) high. Extra-High – .650″ (16.5mm) high. Ultra-High – .935″ (23.7mm) high. Bases: 12L 14 steel, matte black, powder coat finish. Available in s
Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1″ and 30mm Tactical Rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, Tactical Bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 2 SPECS: Rings: Steel, matte black, powder coat finish. Medium – .375″ (9.5mm) high. High – .525″ (13.3mm) high. Extra-High – .650″ (16.5mm) high. Ultra-High – .935″ (23.7mm) high. Bases: 12L 14 steel, matte black, powder coat finish. Available in s
Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1″ and 30mm Tactical Rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, Tactical Bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 2 SPECS: Rings: Steel, matte black, powder coat finish. Medium – .375″ (9.5mm) high. High – .525″ (13.3mm) high. Extra-High – .650″ (16.5mm) high. Ultra-High – .935″ (23.7mm) high. Bases: 12L 14 steel, matte black, powder coat finish. Available in s
Extreme-duty, tactical sling withstands the rigors of military, law enforcement, and other tactical operations while maintaining the high level of comfort and mobility associated with leather. Based on the 1907 Military sling that’s still one of the finest slings ever invented for carry and shooting. Adjustable, 1¼” wide, BioThane® strap provides superior strength and weather-resistance; won’t crack, peel, or become stiff in frigid temperatures. Specially tempered, non-slip, urethane coating eliminates “break-in” time; flexes like leather, yet is impervious to sweat and water. The extra-tough, steel hooks are the same ones we use on our famous, Competitor Plus™ sli SPECS: Strap/Keepers – BioThane; black, brown, or O.D. green. 1¼” (3.2cm) wide. Hooks – Steel, parkerized finish w/brass rivets .108″ (2.75mm) thick.
Extreme-duty, tactical sling withstands the rigors of military, law enforcement, and other tactical operations while maintaining the high level of comfort and mobility associated with leather. Based on the 1907 Military sling that’s still one of the finest slings ever invented for carry and shooting. Adjustable, 1¼” wide, BioThane® strap provides superior strength and weather-resistance; won’t crack, peel, or become stiff in frigid temperatures. Specially tempered, non-slip, urethane coating eliminates “break-in” time; flexes like leather, yet is impervious to sweat and water. The extra-tough, steel hooks are the same ones we use on our famous, Competitor Plus™ sli SPECS: Strap/Keepers – BioThane; black, brown, or O.D. green. 1¼” (3.2cm) wide. Hooks – Steel, parkerized finish w/brass rivets .108″ (2.75mm) thick.
Molded, nylon plug provides Glock pistols a positive, fail-safe weapon retention loop for attachment of tactical lanyards. Inserts into the grip recess, and secures with an Allen screw. Accepts nominal 1/8″ diameter nylon lanyard line. Fits models 17 through 23. SPECS: Black nylon with polished stainless steel loop. Fits Glock 17/19/20/21/22/23. Includes Allen wrench.
Six, socket head, cap screws lock scope into rings and prevent slipping from heavy recoil. 1″ wide rings provide excellent support for heavy tactical and long-range scopes. I.D. for 30mm scopes. 11⁄16″ clamping nut makes it easy to tighten ring to base to a specific torque setting. SPECS: 4140 steel, matte black. Height measured from top of base to bottom of ring. 1-5⁄32″ (29.3mm).
Upward-curved, grip extension fills the web of the shooting hand, spreads recoil over a large area for excellent feel and comfort. Tactical Deluxe w/Palm Shelf features palm shelf that adjusts vertically ½” providing a custom fit for maximum recoil control. All models feature Rigid grip textured finish. SPECS: Polymer, hard texture, black. 5″ (12.5cm) long. Palm shelf 3″ (7.6cm) wide, 4″ (10cm) long, 1″ (2.5cm) thick. Includes attachment screw.
Oversized bolt knob is easy to grab for quick, unencumbered bolt cycling on tactical and benchrest rifles. Features a tapered, palm-fitting design for additional leverage when clearing hard to remove stuck shells. CNC machined from lightweight aluminum and finished with Brownells Gun-Kote™. Installation requires threading of original bolt handle. Available in matte black, matte green, and natural finish. SPECS: 6061 T6 aluminum, matte black, matte green, or natural finish. 1-17⁄32″ (3.9cm) long, .990″ (25.2mm) diameter. 1.3 oz. (35 g) weight. Gunsmith installation recommended.
Simple Lanyard and Carrying (SLC) strap™ features a steel, HK-style snap hook for quick and effortless transition from a conventional two-point sling to a single-point sling position that keeps your tactical rifle or shotgun in front of you for easy cross-shoulder transition. Conventional, two-point sling position allows muzzle-up or muzzle down carry over the shoulder or across the back. Polycarbonate clasps allow easy adjustment to fit any shooter. Built from durable, 1″ wide, nylon webbing for maximum strength and long service life. Ambidextrous design accommodates right- and left-hand shooters. SPECS: Nylon webbing with steel snap hook and polycarbonate adjustment clasps, black. 44” (112cm) long x 1” (2.5cm) wide.
Durable, Cordura-nylon exterior and ½”, closed-cell, foam padding protect your tactical or hunting firearm whether you’re crawling or walking. Opens into a water-resistant shooting mat for prone shooting no matter the weather. Non-slip, Greptile™ surface from 3M® gives your elbow a positive grip when shooting prone. Extra-large accessory pockets with mag pouches and a scope tie-down keep the things you need exactly where you want them. Detachable, padded shoulder straps stow inside a flat, zippered pocket when not in use. Heavy-duty zippers and top-of-the-line materials ensure durability; made in the U.S.A. SPECS: Cordura and Greptile nylon, black and O.D. green. 49″ (124.5cm) long, 12″ (30.5cm) tall.
Unique, 2-piece, bolt knob conversion gives the tactical rifle builder the flexibility to extend the overall bolt handle length for maximum leverage, or to maintain near factory length for minimal bulk or weight increase. Installation is fast and easy – simply cut off the factory bolt knob, drill the cut end of the bolt handle shank, TIG weld or silver solder the pre-threaded adapter stud in place, and screw-on the tactical knob. Increases overall bolt handle length by up to 1″ for added leverage and to prevent the trigger finger from hitting the bolt knob when shouldering the rifle. For minimal length increase, turn and thread the bolt handle shank for 5/16″-18 tpi and screw-on the knob. O SPECS: Knob – 6061 T-6 aluminum, hard-anodized, semi-gloss black or hard-anodized with matte Black-T coating. Adapter Stud – Chrome moly, in-the-white. 1-1⁄16″ (2.7cm) long, O.D. tapers 1” (2.5cm) to 7⁄16″ (1.1cm), 5⁄16″-18 tpi. 1.5 oz. (42.5g) wt. Gunsmith installation recommen
Coil-cord lanyard keeps your weapon with you in the field. Fully adjustable belt loop plus a side release buckle that’s easily removed with one hand. Loop easily attaches to the lanyard loop in the sidearm, including the small loop in SIG weapons. Lanyard has a breaking strength of approximately 85 pounds to prevent serious user injury if weapon becomes entangled. Can also be used on radios, hand-held power tools, cameras, etc. SPECS: Nylon, polypropylene, plastic. NSN# 8465015225352 Length coiled – 22″ (56cm), length extended – 55” (140cm). Black, Coyote (tan) or Army Foliage Green.
Free-float tube eliminates barrel pressure points to help improve accuracy. Four, Picatinny rails let you mount accessory lights, lasers and hand grips to meet mission requirements. Separate lock ring allows you to orient rails at any position; prevents tube from working loose and spinning. Multiple cooling slots prevent heat buildup. SPECS: 6061 aluminum, anodized, matte black. Fits barrel up to 1″ (2.5cm) in diameter. Carbine – 7″ (17.8cm) long. Rifle – 11½” (29.2cm) long.
Free-float tube eliminates barrel pressure points to help improve accuracy. Four, Picatinny rails let you mount accessory lights, lasers and hand grips to meet mission requirements. Separate lock ring allows you to orient rails at any position; prevents tube from working loose and spinning. Multiple cooling slots prevent heat buildup. SPECS: 6061 aluminum, anodized, matte black. Fits barrel up to 1″ (2.5cm) in diameter. Carbine – 7″ (17.8cm) long. Rifle – 11½” (29.2cm) long.
Wrap-around, curved lenses provide unrestricted field-of-view and peripheral vision along with advanced eye protection for the most demanding tactical environments. Lenses are made from indestructible, optical grade polycarbonate and include a scratch-resistant coating on both sides. Designed especially for Military and Law Enforcement personnel who require superior eye protection. Certified to ANSI Z87.1 for high velocity impacts and exceeds U.S. Military Eyewear Ballistic Impact Resistance standard MIL-V43511C and MIL-PRF-31013. Sawfly Safety Glasses with adjustable arms and head strap provide a perfect fit on a wide range of operators. Clear lenses provide maximum visibility durin SPECS: Sawfly Safety Glasses – Vinyl frame, adjustable elastic headband, black. Regular – 6” (15cm) wide x 2” (5.1cm) high. 1oz. (29g) wt. Large – 6¼” (15.9cm) wide x 2-1⁄8″ (5.4cm) high. Desert Locust Goggles – Vinyl frame, rubber gasket, adjustable elastic headband, black. Protective clot
Wrap-around, curved lenses provide unrestricted field-of-view and peripheral vision along with advanced eye protection for the most demanding tactical environments. Lenses are made from indestructible, optical grade polycarbonate and include a scratch-resistant coating on both sides. Designed especially for Military and Law Enforcement personnel who require superior eye protection. Certified to ANSI Z87.1 for high velocity impacts and exceeds U.S. Military Eyewear Ballistic Impact Resistance standard MIL-V43511C and MIL-PRF-31013. Sawfly Safety Glasses with adjustable arms and head strap provide a perfect fit on a wide range of operators. Clear lenses provide maximum visibility durin SPECS: Sawfly Safety Glasses – Vinyl frame, adjustable elastic headband, black. Regular – 6” (15cm) wide x 2” (5.1cm) high. 1oz. (29g) wt. Large – 6¼” (15.9cm) wide x 2-1⁄8″ (5.4cm) high. Desert Locust Goggles – Vinyl frame, rubber gasket, adjustable elastic headband, black. Protective clot
Wrap-around, curved lenses provide unrestricted field-of-view and peripheral vision along with advanced eye protection for the most demanding tactical environments. Lenses are made from indestructible, optical grade polycarbonate and include a scratch-resistant coating on both sides. Designed especially for Military and Law Enforcement personnel who require superior eye protection. Certified to ANSI Z87.1 for high velocity impacts and exceeds U.S. Military Eyewear Ballistic Impact Resistance standard MIL-V43511C and MIL-PRF-31013. Sawfly Safety Glasses with adjustable arms and head strap provide a perfect fit on a wide range of operators. Clear lenses provide maximum visibility durin SPECS: Sawfly Safety Glasses – Vinyl frame, adjustable elastic headband, black. Regular – 6” (15cm) wide x 2” (5.1cm) high. 1oz. (29g) wt. Large – 6¼” (15.9cm) wide x 2-1⁄8″ (5.4cm) high. Desert Locust Goggles – Vinyl frame, rubber gasket, adjustable elastic headband, black. Protective clot
A strong, waterproof, nonreflective tape for secure but temporary attachment of pressure switches or as camo to break up your gun’s silhouette. Use to tape down zippers, swivels, straps and other sources of noise that could give away your position during stealthy operations. Has a thousand and one other uses in the field, in the armory, or on your workbench. This is vinyl-coated, high thread count cloth tape, not cloth reinforced vinyl “duct” tape. Tears off the roll clean and straight. High-tack, synthetic rubber adhesive won’t leave behind sticky residue and provides excellent adhesion and conformability over a wide temperature range. 42 lb. per inch tensile strength means this tape won’t SPECS: Vinyl coated cotton cloth, synthetic rubber resin adhesive. 1” (2.5cm) wide, 180’ (55m) long, .001” (12 mil) thick. Available in Black and Coyote Brown.
1000 denier, Cordura nylon sling features an integral, elastic band that pulls the gun against your body for a tight, custom fit. Elastic also helps steady the gun when used as a shooting sling. Quick adjustment instantly transitions the weapon in tactical situations; adjusts easily to fit your body size. SPECS: 1000 denier Cordura nylon. Black.
Impact-resistant, Tactical Stock Adapter provides a strong, lightweight coupler to attach pistol grips and CAR-15 style butt stocks to the popular, Remington 870 shotgun. 33% fiberglass-reinforced nylon provides superior strength with minimal weight increase; won’t warp, crack, or shrink in extreme weather conditions. Tight-tolerance, molding process ensures proper fit and virtually eliminates unsightly mold seams. Slight, 7° angle drops the butt stock for an improved sight path with barrel-mounted sights. Allows 10″ to 13″ length-of-pull adjustment when used with a collapsible, “shorty” stock. SPECS: Fiberglass-reinforced nylon, matte black. 2¾” (7cm) long, 1½” (3.8cm) wide, 3″ (7.6cm) high. Includes locking ring and grip hardware. 5 oz. (142g) wt. Fits Rem 870, 12 ga.
We first saw the detachable, JP-SRTS sight in action at a 3-gun, tactical match. Attaching this compact, secondary sight to a Picatinny mount on the side of the handguard gave AR-15 shooters the edge when engaging targets from point blank range out to 40 yards. The rigid aluminum bar supplements optics and other precise, long range sight setups required for the long-range stages. Once clamped in place (1 or 2 o’clock position recommended) simply cant the rifle to instantly acquire the A-2 style, front sight post. Dovetailed, rear notch provides plenty of windage adjustment; set front sight elevation using a standard, A2, front sight tool. Includes five, easy-to-see polym SPECS: Aluminum, matte black. 6″ (15.2cm) long, 5/8″ (1.6cm) wide, 1″ (2.5cm) high. 4 oz. (113g) wt.
Machined steel, extended tactical choke with large diameter bore provides extra wide patterns at close range for home defense or CQB operations. Features a serrated, saw-tooth tip that holds tight against locks and hinges to prevent the muzzle from sliding during forced entry operation. Twelve, equally spaced ports redirect combustion gases to reduce felt recoil and prevent barrel damage when used for forced entry. Knurled gripping surface makes it easy to install and remove the choke without special tools. Precision machined from 1704 stainless steel for maximum strength, then treated with a manganese phosphate finish for improved wear resistance. Models available for Mossberg 835/935, W SPECS: 1704 stainless steel, manganese phosphate finish, matte black. Fits 12 gauge only.
Favored by law enforcement, military, and shooters across the globe, the Peltor Tactical 6-S active volume hearing protector features an outstanding noise reduction rating of 19 dBA. Assisted by an electronic vent, the hearing protector will reduce hazardous impulse noises from firearms to harmless levels within 5 milliseconds. By localizing weak sounds and attenuating impulse sounds, it saves you…
Features: Cree MC-E LED, life span up to 50000 hours Function Three Brightness Levels (Low-Medium-High) and Strobe Mode Output and Runtime: High Mode 700 Lumens/1.5 Hours Medium Mode 160 Lumens/8 Hours Low Mode 12 Lumens/50 Hours Strobe 10HZ/10Hours Finish: HA Type Reflector: Aluminum alloy Orange Peel Reflector with Perfect Beam Lens: Anti-shattering ultra clear lens, anti-scratching and anti-sl…
WEAPONS OF WAR is a fast-paced description and demonstration of some of the finest offesnsive and defensive weapons in the world. Unlike other military documentaries, WEAPONS OF WAR focuses on technological systems that will take us into the 21st Century. These systems include electronic warfare, electronic counter measures, target acquisition and guidance, anti-submarine warfare, surveillance, id…
Video shows you how to quickly and easily protect your rifle, pistol or shotgun by using this space age finish. Refinish that rusty or worn firearm with a durable tactical black matte, bake-on lacquer finish. You will be able to quickly and easily protect your rifle, pistol or shotgun by using this space age finish. Simple to use, three coat application, duplicates factory color and finish. Works …
Is the Tippmann US Army Paintball Alpha Black Tactical a good choice of gun to buy?
I want a nice paintball gun that isn’t too expensive but one that won’t break and has good reviews. Does anyone have any feedback of this paintball gun?
Yes – the US Army paintball guns are very good. Tippmann designed and produces these guns under the US Army name. There are based internally on the Tippmann 98. The 98 is a favorite rental gun everywhere due to the ease of use, cleaning and overall durability of the paintball marker. The Alpha Bacl Tactical is a good marker to start out because like the 98, it is upgradable and can grow with you as your interest and knowledge grows.
Tippmann will be replacing the US Army Alpha Black (non-tactical) with the US Army Carver One. The Alpha Black Tactical will still be produced in the semi-auto, camo and egrip models. The Carver One is slightly different cosmetically and we sell for $99 – its release date is around the 1-2 week in March so keep an eye out.
If you’re just getting into paintball and need everything, consider a package deal.
Currently in service as the Rifle Combat Optic (RCO) of the United States Marine Corps, the TA31RCO is designed specifically for the 14.5″ barreled M4 carbine. The bright, red, upside down “V” reticle gives fast, instinctive target acquisition at close range, and is bullet drop compensated (BDC) to the trajectory of military-issue 5.56 NATO ammunition for high hit probability out to 800 meters. Features the original TA31’s long eye relief, ample 4x magnification, superior lens clarity, low-light capability, and Bindon Aiming Concept (BAC) for quick, both eyes open, aiming. Mounts to MIL-STD 1913 Picatinny and similar flattop rails; base may be removed to allow installation on carry-handle ri SPECS: Forged 7075-T6 aluminum housing, matte black anodized; coated lenses. Approximately 5-7⁄8″ (14.9cm) long, 6-7⁄8″ (17.5cm) with Killflash installed.. 15.9 oz. (451 g) weight. 4x magnification, 32mm objective lens. Adjustable for windage and elevation. Includes KillFLASH, nylon c
Compact, 1x magnifying optic combines the fast target acquisition, accuracy, and low-light capability of a red dot sight with the reliability and clarity of a traditional rifle scope. Allows easy, both-eyes-open sighting that preserves depth perception and peripheral vision for quick reaction to changes in target—perfect for tactical operations or hunting applications that require a low-magnification scope. Battery powered illumination module clamps to the side of the tube and illuminates the reticle in red for maximum contrast with target. Eight brightness settings let you adjust the intensity of the crisp, circle-and-crosshairs reticle for light conditions varying from bright daylight to n SPECS: Aluminum, anodized, matte black. 43⁄8″ (11.1cm) long, 2” (5.1cm) maximum width with Illumination Module installed. 30mm diameter tube. 8.4 oz. (237g) weight without base. Eye relief: 3” (7.6cm). Uses (1) DL1/3N button-type battery, included.
Get more scope for your money with the Burris Fullfield II Ballistic Plex Rifle Scope with Rimfire Scope Combo. This two-for-one package includes a time-tested Fullfield II scope and a free 3?9×40 Rimfire scope?perfect for a .22 or .17 magnum rifle. FullField II Rifle Scopes feature premium glass and fully multi-coated lenses to deliver 95% light transmission. This quality scope also includes extensive eye relief, nitrogen-purged and filled one piece main tube construction, and lighter weight. Scope utilizes an integrated lower ring and adjustable objective eyepiece with steel click adjustments. Waterproof and fogproof, a FullField II will withstand recoil from any magnum caliber rifle. The Ballistic Plex Reticle makes it easy to compensate for bullet drop at distances of 200 – 500 yards. Full Field scope features a Manufacturer’s Forever Warranty. FOV = field of view at 100 yards. Manufacturer model #: 200183-RF.
Nikon Monarch Scopes – Totally Redesigned! While ruggedness and waterproof integrity are important virtues in a riflescope, it?s the absolute mechanical precision and overall optical perfection that separate Monarch scopes from all the others. The heart of the Monarch is the advanced Ultra ClearCoat? optical system, a proprietary blend of Nikon?s legendary glass and anti-reflective multicoatings that bump light transmission to the theoretical maximum. All feature quick-focus eyepieces and positive click hand-turn windage and elevation adjustments for convenience, speed and minimum motion. Manufacturer’s full lifetime warranty. It took Nikon 90 years to compile the data and invent the processes that created the Monarch, all the while challenging not only the limits set by others, but also the limits of optical science itself! Its reputation is anchored by Eye Box ocular technology, which boasts an impressive 4x zoom range and 4″ of constant, non-critical eye relief. With its massive ocular lens, the Monarch is able to deliver huge, exceptionally bright, high resolution sight picture and maximum field of view. The entire optical system is engineered to provide you with a bright, sharp, flat sight picture and light transmission up to 95%! At the same time, the length of each scope has been minimized, enabling it to be mounted on virtually any rifle. 1/4-MOA positive click reticle adjustments (1/8-MOA on 5?20×44 and 6?24×50 models) ensure confident sight-in and field adjustments. Interchangeable Turret Technology allows you to customize turret knobs and caps, and a locking side focus knob on the turret (except 2.5?10x models) allows for precise parallax adjustment maintenance at virtually any range. The rugged capabilities of each scope are guaranteed to perform at 100% waterproof, fogproof, and shockproof levels. Key: BDC = Bullet Drop Conpensating Reticle NP = Nikoplex Standard Reticle Nikon? BDC Reticle Nikon?s Bullet Drop Compensating (BDC) reticle compensates for trajectory to provide fast, simple aiming points for various shot distances. Unique system integrates a series of small ?ballistic circles?, each subtending 2″@100 yards, allowing unimpeded targeting. Provides aiming points out to 500 yards with a 100-yard sight-in for standard centerfire cartridges and 600 yards with a 200-yard sight-in for magnum cartridges. FOV = field of view at 100 yards, given in feet.
Machined, 6061-T6 alloy, high-resolution scope with a nitrogen-filled, o-ring-sealed tube and precision ground German glass provides superb clarity for tactical and hunting situations. Multi-coated lenses by Schott Glasswerk are treated with the Carl Zeiss T-3 system, to eliminate glare and maximize light transmission. Elevation and windage knobs positively stop and audibly click for precise fine-tuning; white numbers make it easy to keep track of adjustments. Recoil-proof, waterproof and weatherproof from -40° F. to +140° F. to withstand high humidity, rain, fog, and snow. Coated with a durable, matte, black finish. 2.5 – 10 x 42 x 30mm – MP8, range-finding reticle allows fast holdo SPECS: 6061 T-6 aluminum body, anodized, black, matte finish. ½ M.O.A. click value at 100 yds. 30mm (1.2″) dia. tube. 42mm(1.6″) diameter objective lens. 34 to 11.9 ft. (11m to 3.5m) f.o.v. @ 100 yds. 3.5″ (8.9cm) eye relief. 14.7″ (37cm) long. 17 oz.(481g) wt.
Savage package rifles take the guesswork out of rifle buying. No need to pick out bases, rings, scope and sling. Standard models are fitted with a 3-9×40 scope. All internal magazine models come with Savage’s revolutionary AccuTrigger.
Savage package rifles take the guesswork out of rifle buying. No need to pick out bases, rings, scope and sling. Standard models are fitted with a 3-9×40 scope. All internal magazine models come with Savage’s revolutionary AccuTrigger.
Add the versatility of a one -piece Picatinny scope rail to your rifle or shotgun without drilling or tapping. Precision CNC machined from lightweight, extruded 6061 T6 aluminum stock with MIL-STD 1913 Picatinny spec slot-and-rail spacing that allows fast and simple adjustment of eye relief, plus greater flexibility in scope choice. Drilled to fit the factory hole spacing. Accepts Picatinny or Weaver scope rings. Includes the correct factory specification socket head Allen screws and hex wrench. SPECS: 6061 T6 aluminum, anodized, matte black finish. Short action (S/A) and long action (L/A) models available for some rifles. Browning A-Bolt S/A – 6-1⁄8” (15.6cm) long. Browning A-Bolt L/A – 6-15⁄16” (17.6cm) long. Moss. 500/590/835 – 5¾” (14.6
Add the versatility of a one -piece Picatinny scope rail to your rifle or shotgun without drilling or tapping. Precision CNC machined from lightweight, extruded 6061 T6 aluminum stock with MIL-STD 1913 Picatinny spec slot-and-rail spacing that allows fast and simple adjustment of eye relief, plus greater flexibility in scope choice. Drilled to fit the factory hole spacing. Accepts Picatinny or Weaver scope rings. Includes the correct factory specification socket head Allen screws and hex wrench. SPECS: 6061 T6 aluminum, anodized, matte black finish. Short action (S/A) and long action (L/A) models available for some rifles. Browning A-Bolt S/A – 6-1⁄8” (15.6cm) long. Browning A-Bolt L/A – 6-15⁄16” (17.6cm) long. Moss. 500/590/835 – 5¾” (14.6
Quality airgun scope at a great price Adjustable objective Fully coated optics 3/4” aluminum monotube construction 1/4-MOA coin slot windage and elevation adjustment Waterproof, fogproof, and shockproof Comes with lens caps and rimfire mounting rings Enjoy quality and accuracy for your high performance airgun at a great price with the RedHead Ascent 3-7×20 Air Rifle Scope. This adjustable objective scope uses fully coated optics for better light transmission and 3/4” monotube aluminum construction for trustworthy durability. Sight in precisely with the 1/4-MOA coin slot windage and elevation adjustments. Waterproof, fogproof, and shockproof. Black matte finish. Comes with lens caps and rimfire mounting rings. Duplex reticle. 3.3” – 3.1” eye relief. 5.29 oz. 44.28′ – 12.57′ field of view at 100 yards. 11.42” long. FOV = Field of view @ 100 yards.
Quality airgun scope at a great price Fully coated optics 3/4” aluminum monotube construction 1/4-MOA coin slot windage and elevation adjustment Waterproof, fogproof, and shockproof Comes with lens caps and rimfire mounting rings Enjoy quality and accuracy for your high performance airgun at a great price with the RedHead Ascent 4×15 Air Rifle Scope. These scopes use fully coated optics for better light transmission and 3/4” aluminum monotube construction for trustworthy durability. Sight in precisely with the 1/4-MOA coin slot windage and elevation adjustments. Waterproof, fogproof, and shockproof. Black matte finish. Comes with lens caps and rimfire mounting rings. Cross Hair reticle. 2.95” eye relief. 3.63 oz. 17.82′ field of view at 100 yards. 10.63” long. FOV = Field of view @ 100 yards.
Attractive scope base blends beautifully with the lines of your Mauser rifle and provides a super strong platform to install your optics firmly with no alterations to your rifle. Replaces the rear sight slide and gives you a solid base with five milled slots to securely mount and position your optics. Long eye relief handgun or scout scopes, plus red dot optics. Accepts Weaver-style rings and no gunsmithing required. SPECS: Anodized aluminum. Matte black. 4″ (10.2cm) long, 13⁄16″ (20.6mm) wide. 3⁄16″ (4.7mm) tall. (2) mounting screws and (2) roll pins included.
Quality airgun scope designed specially for today’s high performance air rifles Adjustable objective Fully multi-coated optics 1” aluminum monotube construction Finger adjustible 1/4-MOA windage and elevation adjustment Nitrogen purged – waterproof, fogproof, and shockproof Fast focus eyepiece Comes with flip up lens caps, lens cloth, and lens pen Enjoy quality and accuracy designed specially for today’s high performance rifles with the RedHead Epic 4-12×40 Air Rifle Scope. This performance scope uses fully multi-coated optics for superior light transmission and brightness. Strong 1” monotube aluminum construction delivers trustworthy reliability. Finger adjustible 1/4-MOA windage and elevation adjustments. Nitrogen purged for waterproof, fogproof, and shockproof performance. Fast focus eyepiece. Black matte finish. Comes with see-thru flip up lens caps, lens cloth, and RedHead lens pen. Enhanced Duplex reticle. 4” – 3.6” eye relief. 13 oz. 30.9′ – 10.36′ field of view at 100 yards. 13.7” long. FOV = Field of view @ 100 yards.
The A.R.M.S. Universal M16 Universal Scope Mount offers a secure platform that accepts NATO STANAG and Weaver type scopes and rings. It is an ideal scope mount specifically designed for the M16A1/A2 rifle an attaches via a self-locking thumbnut that snugly fits into the hole in the carry handle for an accurate and continuous zero hold. The #02 carry handle mount also features a wide angle TV-shaped channel for use with a variety of iron sights. Specs: Weight: 2.6 oz, Length: 5-inches, Also fits detachable carry handle models
Aluminum aiming laser mounts to the front sight and gives you a bright red aim point in low light, tactical situations. Requires no modification to the weapon and is fully adjustable for windage and elevation in 0.4 milliradian clicks. Does not obscure iron sights and can be used on M-203 equipped, side sling mount rifles. Dual, integral picatinny rails allow you to mount tactical lights and other accessories. Pressure pad switch mounts to rifle with Velcro pad and provides momentary activation. Up to 5 hours of laser activation from a single AA battery (included). SPECS: 6061T-6 aluminum, matte black. 4.9″ (142mm) long, .75″ (19mm) wide, 1.7″ (43mm) high. Pressure pad wire length – 8″ (20cm).
Lightweight, compact ACOG combines ample 3X magnification with Bindon Aiming Concept (BAC) for quick, instinctive, both-eyes-open aiming—perfect for a patrol rifle or military carbine. Battery-free ,dual illumination system uses an amber fiber optic rod and glowing tritium lamp to illuminate the reticle in bright daylight and low light. Chevron reticle resembles an upside down “V” and provides the benefits of a triangle reticle while covering less of the target. Mounts to a flattop receiver with the included TA60 Compact ACOG M16 Base Flattop Adapter, which may be removed for installation on carry-handle rifles. Sight tunnel allows use of iron sights with scope on. Avail SPECS: Forged 7075-T6 aluminum housing, matte black anodized; coated lenses. 61⁄8" (15.6cm) long. 7 oz. (198g) weight, scope only. 11.8 oz. (334g) weight including TA60 base. 3x magnification, 30mm objective lens. Adjustable for windage and elevation. TA33-8 – for .223 AR-15/M16. T
Lightweight, compact ACOG combines ample 3X magnification with Bindon Aiming Concept (BAC) for quick, instinctive, both-eyes-open aiming—perfect for a patrol rifle or military carbine. Battery-free ,dual illumination system uses an amber fiber optic rod and glowing tritium lamp to illuminate the reticle in bright daylight and low light. Chevron reticle resembles an upside down “V” and provides the benefits of a triangle reticle while covering less of the target. Mounts to a flattop receiver with the included TA60 Compact ACOG M16 Base Flattop Adapter, which may be removed for installation on carry-handle rifles. Sight tunnel allows use of iron sights with scope on. Avail SPECS: Forged 7075-T6 aluminum housing, matte black anodized; coated lenses. 61⁄8" (15.6cm) long. 7 oz. (198g) weight, scope only. 11.8 oz. (334g) weight including TA60 base. 3x magnification, 30mm objective lens. Adjustable for windage and elevation. TA33-8 – for .223 AR-15/M16. T
High quality claw-type mount delivers a rigid scope mounting solution for Swiss-made Schmidt Rubin ZFK55 sniper rifles. Fits existing claw mount attachment recesses. Attaches to left side of receiver with no modifications to gun. Accepts Weaver-style rings. SPECS: Steel, polished blue. 5¾” (14.5cm) long, 1½” (3.81cm) wide, 1-1⁄8″ (2.85cm) high. Fits ZFK55.
A tough, protective gun case for your valuable firearm Tough 1200 denier polyester exterior with a strong and flexible diamond plate PVC bottom Foam padding and velvet lining hold gun safely inside Interior web straps reduce shifting during transport Two front pockets with snap closures for gear Wide, padded shoulder strap and dual web handles for easy carrying Serious hunters invest a lot of time and money to get their firearms ready to use and need a case that transports their gun safely and securely. Built tough and durable, the RedHead 1856 Collection Rectangular Rifle Scope Case combines 1200 denier polyester with a diamond plate PVC bottom. Inside this tough exterior, foam padding and a plush velvet lining hold your gun safely with interior web straps to reduce shifting during transport. This quality case gives you room for gear in its two front snap pockets and is easily carried by its wide, padded shoulder strap or dual padded handles for easy carrying. Color: Black. Imported.
A tough, protective gun case for your valuable firearm Tough 1200 denier polyester exterior with a strong and flexible diamond plate PVC bottom Foam padding and velvet lining hold gun safely inside Interior web straps reduce shifting during transport Large zippered front pocket for gear Wide, padded shoulder strap and dual web handles for easy carrying Serious hunters invest a lot of time and money to get their firearms ready to use and need a case that transports their gun safely and securely. Built tough and durable, the RedHead 1856 Collection Rifle Scope Case combines a 1200 denier polyester exterior with a diamond plate PVC bottom. Inside this tough exterior, foam padding and a plush velvet lining hold your gun safely with interior web straps to reduce shifting during transport. This quality case also features a large zippered front pocket with the RedHead 1856 deer skull logo prominently displayed and a wide, padded shoulder strap or dual web handles for easy carrying. Color: Black. Imported.
The ultimate, self-luminous rifle sight. Improves sight pickup and visibility during low-light hours when game is most active. All sights include the rugged Traser® luminous, sapphire crystal, tritium lamps for a bright, well-defined aiming point and extra-long life. Lamps guaranteed by the manufacturer to remain self-luminous for 12 years. SPECS: Steel body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All sights are adjustable if rifle or shotgun barrel was originally equipped with factory adjustable sights.
Lightweight, Compact ACOG, with the exclusive Bindon Aiming Concept (BAC) for quick, both eyes open, aiming. Mounts on the AR-15 carry handle without modifications; allows use of standard issue sights. Dual illumination; fiber optic rod with glowing amber tritium illuminates the aiming Triangle (Tri) or Dot in bright daylight and low light. SPECS: Forged 7070-T6 aluminum housing, black, anodized, coated lenses. 5.3" (13.4cm) long, 5.8 oz.(164 g) wt. 2.0X magnification, 20mm objective lens. Adjustable for windage and elevation.
Lightweight, Compact ACOG, with the exclusive Bindon Aiming Concept (BAC) for quick, both eyes open, aiming. Mounts on the AR-15 carry handle without modifications; allows use of standard issue sights. Dual illumination; fiber optic rod with glowing amber tritium illuminates the aiming Triangle (Tri) or Dot in bright daylight and low light. SPECS: Forged 7070-T6 aluminum housing, black, anodized, coated lenses. 5.3" (13.4cm) long, 5.8 oz.(164 g) wt. 2.0X magnification, 20mm objective lens. Adjustable for windage and elevation.
The A.R.M.S. Universal M16 Universal Scope Mount offers a secure platform that accepts NATO STANAG and Weaver type scopes and rings. It is an ideal scope mount specifically designed for the M16A1/A2 rifle an attaches via a self-locking thumbnut that snugly fits into the hole in the carry handle for an accurate and continuous zero hold. The #02 carry handle mount also features a wide angle TV-shaped channel for use with a variety of iron sights. Specs: Weight: 2.6 oz, Length: 5-inches, Also fits detachable carry handle models
One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to Picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum. Models available to fit 1" and 30mm scope bodies. SPECS: Aluminum, hardcoat anodized, black, matte finish. 5-1⁄8" (13cm) O.A.L.. Height measured from top of rail to bottom of ring. 1” – 1.18” (2.99cm) high, 10.7 oz. (303g) weight; 30mm – 1.14” (2.89cm); 10 oz. (283.5g) weight.
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 SPECS: Aluminum Models – 6061 T6 aluminum billet, hardcoat anodized matte black. Steel Models – 4140 billet steel, matte black oxide finish. Savage fits models with AccuTrigger™. Remington 700 LA also fits Howa 1500 and Weatherby Vanguard. Mauser 98 fits military rifle
The SpecterOS 3.0 is a lightweight and rugged 3x Optical Sight designed for modern military and security applications. Incorporating an illuminated reticle with range finder and proprietary Rapid Aiming Feature, the SpecterOS 3.0 has the unique ability to offer rapid engagement in CQB applications while providing precise aiming at distant targets.A one-piece aluminum housing coupled with shock-abs…
The Stedi-Stock Camera Shoulder Brace will help eliminate poor quality pictures, due to “camera shake”. The Stedi-Stock Camcorder Stabilizer will assist in accomplishing smoother videos (especially when filming action or sweeping panoramic shots). The Stedi-Stock Spotting Scope Shoulder mount, will assist the user in holding a spotting scope stable without the weight of an unwieldy, bulky, cumbers…
US Army, Technical Manual, TM 9-1290-357-15, AIMING CIRCLE M1, W/E, 1290-671-6145, 19701-1. Scopea. These instructions are for use by operator,crew, organization, direct support, general supportand depot maintenance personnel. They applyto the aiming circle M1, w/e (1190-671-6145).b. Appendix A contains a list of current references,including supply and technical manuals,forms and other publication…
Ok I have a ruger single shot lever action 25-06 and a Browning 3×9 scope. Say I aim for the bullseye and hit 4 inches to the left (3oclock), Would I move the crosshairs 8 clicks to the right to follow the bullet or 8 clicks left to follow the bullseye.. HELP PLEASE
Left would be 9 oclock. Move the crosshairs towards the bullseye.
CHEZZZER ‘Wanted’ COD4 No Scope and Sniping Montage [PS3]
These Georgia Boot? 8? Insulated Waterproof Gore-Tex? boots for men are a traditional style workboot with Gore-Tex? waterproof protection and lightly insulated for warmth in cool conditions. Imported. Features: Moisture wicking Cambrelle? lined Gore-Tex ? bootie 200 Gram Thinsulate? Insulation Cushioned insole Removable contoured orthotic insert Machined brass stud hooks Genuine Vibram? high abrasion rubber lug outsole Steel shank Black waterproof full grain leather upper. Manufacturer model #: G8040. Our pros recommend the RedHead? Work Crew Sock with this boot. Click here!
Boots that know you have the right to remain dry. Includes a GORE-TEX lining, full-grain leather and ballistic nylon uppers, fully-cushioned removable comfort insoles, and the exclusive Ultra-Lite Xtreme outsoles. Weight per pair: 3.3 lbs. Imported. Features: GORE-TEX waterproof lining Fully-cushioned removable comfort insoles Ultra-Lite Xtreme outsoles Manufacturer model #: E02268.
Durable, comfortable, and lightweight – what else could you ask for? The Wolverine DuraShocks Gore-Tex 8” Waterproof Work Boots are built with a full-grain leather upper for strength and a breathable Gore-Tex waterproof membrane lining helps to keep your feet cool. Comes with a removable, dual-density footbed that provides plenty of cushioning. Color: Brown. Imported. Features: Waterproof non-insulated Full-grain leather upper Dual-density footbed Rubber Midsole Lightweight nylon shank Manufacturer model #: W02565.
Waterproof / breathable and ready for work or play! These are a guy’s go-anywhere boots. Nice enough for work and around town. Full Gore-tex waterproof / breathable construction and hiker sole so you’re never held back by “sissy dress-up shoes”. Check ‘em out: Waterproof nubuck leather upper with moisture-wicking Cambrelle Lining; Durable Comfort Core corner-stitch outsole construction; Padded lea…
Size: 8.5
Width: Medium
Durably Waterproof and Breathable GORE_TEX Fabric
Full-Grain Water-Resistant Leather and Lightweight 1000 Denier Nylon
400 Grams of Thinsulate Insulation
Aegis Microbe Shield Applied to Terra Suspension Footbed
Eliminator 2.2 Comfort Last
Slip and Oil Resistant TPU/PU Outsole Provides Flexibility and Comfort…
