Hays Shooting Sports: Recreational Firearms & Ammunitions

Shooting Sports Resources – Reviews – Supplies

SYNTHETIC RIFLE STOCK WEATHERBY MK V RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

Weatherby VDM306SR4O 30-06 SPG Vanguard Sporter Bolt Action Rifle $699.99 Like all Vanguard rifles, the Sporter comes with a factory shot target, assuring you of guaranteed accuracy of 1 1/2″ (or better) 3-shot group sat 100 yards. The Sporter’s figured walnut stock has a semi-gloss finish and feature their famous Monte Carlo design. It is accented with a rosewood forend tip and fine line point checkering. Hand bedded to the barreled action, the stock has a forend pressure point that dampens barrel harmonics to enhance accuracy. A recoil pad is standard. Other features include a 24-inch, #2 contour cold hammer forged 4140 steel barrel with a matte blue finish. The barrel has a radius crown and a muzzle diameter of .616.

Weatherby VDM270NR4O 270 WIN Vanguard Sporter Bolt Action Rifle $699.99 Like all Vanguard rifles, the Sporter comes with a factory shot target, assuring you of guaranteed accuracy of 1 1/2″ (or better) 3-shot group sat 100 yards. The Sporter’s figured walnut stock has a semi-gloss finish and feature their famous Monte Carlo design. It is accented with a rosewood forend tip and fine line point checkering. Hand bedded to the barreled action, the stock has a forend pressure point that dampens barrel harmonics to enhance accuracy. A recoil pad is standard. Other features include a 24-inch, #2 contour cold hammer forged 4140 steel barrel with a matte blue finish. The barrel has a radius crown and a muzzle diameter of .616.

SYNTHETIC RIFLE STOCK WBY VANGUARD/HOWA LONG RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK WBY VANGUARD/HOWA S.A. RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

MEDALIST? STOCK 6501-02 WBY VANGUARD LA STOCK BLACK $289.99 Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Browning A-Bolt features an aluminum pillar system instead of bedding block. Weatherby has a raised, Monte Carlo cheekpiece. SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½” (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate. Short Action (SA), Long Action (LA), Win Short Mag (WSM), Win

WEATHERBY/HOWA/S&W/MOSSBERG CUSTOM RIFLE TRIGGERS WTHBY-1 1-1/2-3LB. WEATHERBY TRIGGER $129.99 Precision made trigger is factory pre-set for a light, crisp pull that requires no further adjustments. CNC machined, aluminum housing provides greater internal clearance for reduced drag and is hardcoat anodized for durability. Hardened steel internal components provide a consistent, smooth pull. Simple drop-in fit replaces factory trigger assembly without alterations. Fits Weatherby Vanguard, Howa with both 2- and 3-position safeties, Smith & Wesson 1500, and Mossberg 100 ATR, right hand only. WTHBY-1 trigger pull weight is preset to approximately 2 to 2½ lb. and is from 1½ to 4 lb. WTHBY-V trigger pull weight is preset to 16 oz., ideal for varmint shooting or competition. A SPECS: Housing – T6-6061 aluminum, hardcoat anodized. Internals – A-2 tool steel, hardened. Black, matte finish. Right hand only. Fits Weatherby Vanguard, Howa with 2- and 3-position safeties, Smith & Wesson 1500, and Mossberg 100 ATR. WTHBY-1 – 1½ lb. to 4 lb. (1.8kg) pull wt. WTHBY-V

WEATHERBY/HOWA/S&W/MOSSBERG CUSTOM RIFLE TRIGGERS WTHBY-V 12OZ.-1-1/2 LB. WEATHERBY TRIG $139.99 Precision made trigger is factory pre-set for a light, crisp pull that requires no further adjustments. CNC machined, aluminum housing provides greater internal clearance for reduced drag and is hardcoat anodized for durability. Hardened steel internal components provide a consistent, smooth pull. Simple drop-in fit replaces factory trigger assembly without alterations. Fits Weatherby Vanguard, Howa with both 2- and 3-position safeties, Smith & Wesson 1500, and Mossberg 100 ATR, right hand only. WTHBY-1 trigger pull weight is preset to approximately 2 to 2Precision made trigger is factory pre-set for a light, crisp pull that requires no further adjustments. CNC machined, aluminum housing provides greater internal clearance for reduced drag and is hardcoat anodized for durability. Hardened steel internal components provide a consistent, smooth pull. Simple drop-in fit replaces factory trigger assembly without alterations. Fits Weatherby Vanguard, Howa with both 2- and 3-position safeties, Smith & Wesson 1500, and Mossberg 100 ATR, right hand only. WTHBY-1 trigger pull weight is preset to approximately 2 to 2½ lb. and is from 1½ to 4 lb. WTHBY-V trigger pull weight is preset to 16 oz., ideal for varmint shooting or competition. A SPECS: Housing – T6-6061 aluminum, hardcoat anodized. Internals – A-2 tool steel, hardened. Black, matte finish. Right hand only. Fits Weatherby Vanguard, Howa with 2- and 3-position safeties, Smith & Wesson 1500, and Mossberg 100 ATR. WTHBY-1 – 1½ lb. to 4 lb. (1.8kg) pull wt. WTHBY-V

Weatherby Vanguard Synthetic Bolt Action 22-250 REM Rifle $449.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

Weatherby Vanguard Synthetic Bolt Action 223 REM/5.56 Nato Rifle $449.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

Weatherby Vanguard Synthetic Bolt Action 243 WIN Rifle $419.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

Weatherby Vanguard Synthetic Bolt Action 308 WIN Rifle $419.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

Weatherby Vanguard Synthetic Bolt Action 30-06 SPG Rifle $419.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

Weatherby Vanguard Synthetic Bolt Action 270 WIN Rifle $419.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

Weatherby Vanguard Synthetic Bolt Action 300 WTHBY Rifle $419.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

Weatherby Vanguard Synthetic Bolt Action 257 WTHBY Rifle $419.99 The Vanguard action incorporates a one piece fluted bolt with three gas ports and two locking lugs for a 90-degree bolt lift. The bolt shroud is fully enclosed for extra strength and structural integrity, and features a traditional side release of the bolt assembly. Embellishments such as a knurled bolt knob add to the beauty and value of this popular rifle.

SYNTHETIC RIFLE STOCK WIN 70 SA SYNTHETIC RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK WIN 70 FEATHERWEIGHT RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK 071 WIN 70 STD RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK RUGER 77 LONG ACTION SYN RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK 098C MAUSER M98 SYN RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK REM 600 SYN RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK REM 700 BDL SHORT SYN. RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK 700LC REM 700 BDL LONG SYN RIFLE STOCK $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK REM 700 ADL LONG STOCK W/O CHEEKPIECE $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

SYNTHETIC RIFLE STOCK REM 700 ADL SHORT STOCK W/O CHEEKPIECE $252 Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. SPECS: Fiberglass-covered foam, gray. 30¼” (76cm) long, 13-7/8″ (35cm) l.o.p. without pad, 1″ (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs. Rem. 700 BDL, Ruger 77, Howa and Weatherby Vanguard models include raised cheekpiece. Rem. 600 will accept 700 ADL t

Weatherby PA-08 Synthetic Pump Action Shotgun $299.99 All Weatherby PA-08 pump shotguns feature a ventilated top rib and brass bead front sight to aid in target acquisition. The vent rib works to dissipate heat in the barrel, promotes a smoother “swing-thru” and gives the shooter an excellent sight line for acquiring fast-moving targets. Each PA-08 gun comes with three application-specific, screw-in choke tubes. Lightweight and durable injection-molded synthetic stock. All metalwork is matte black to reduce glare. Available in 12 gauge, 3″ chamber and the chrome-lined barrel comes with three application-specific choke tubes(IC, M, F).

HOWA & S&W 1500/WEATHERBY VANGUARD ADJUSTABLE TRIGGER JARD HOWA 1500 TRIGGER – 26 OZ $132 All-steel, single stage drop-in trigger provides adjustability not available in the factory trigger. Can be installed “as is” with no extra tuning, or can be adjusted with set screws for overtravel, sear engagement, and minor changes in pull weight. Safety can be adjusted to eliminate trigger motion as sear engagement is changed. Internals are precision machined and hardened to provide maximum reliability and crispness for more consistent accuracy. Fits Howa 1500, S&W 1500, and Weatherby Vanguard rifles. Includes built-in safety. SPECS: Steel housing and internals, black, matte finish. Smooth ¼” (6.4mm) wide trigger face. Fits Howa 1500, S&W 1500, and Weatherby Vanguard. Includes safety. Available in 14 oz., 19 oz., 22 oz., 26 oz., and 28 oz. pull weights.

HOWA & S&W 1500/WEATHERBY VANGUARD ADJUSTABLE TRIGGER JARD HOWA 1500 TRIGGER – 14 OZ $132 All-steel, single stage drop-in trigger provides adjustability not available in the factory trigger. Can be installed “as is” with no extra tuning, or can be adjusted with set screws for overtravel, sear engagement, and minor changes in pull weight. Safety can be adjusted to eliminate trigger motion as sear engagement is changed. Internals are precision machined and hardened to provide maximum reliability and crispness for more consistent accuracy. Fits Howa 1500, S&W 1500, and Weatherby Vanguard rifles. Includes built-in safety. SPECS: Steel housing and internals, black, matte finish. Smooth ¼” (6.4mm) wide trigger face. Fits Howa 1500, S&W 1500, and Weatherby Vanguard. Includes safety. Available in 14 oz., 19 oz., 22 oz., 26 oz., and 28 oz. pull weights.

HOWA & S&W 1500/WEATHERBY VANGUARD ADJUSTABLE TRIGGER JARD HOWA 1500 TRIGGER – 22 OZ $132 All-steel, single stage drop-in trigger provides adjustability not available in the factory trigger. Can be installed “as is” with no extra tuning, or can be adjusted with set screws for overtravel, sear engagement, and minor changes in pull weight. Safety can be adjusted to eliminate trigger motion as sear engagement is changed. Internals are precision machined and hardened to provide maximum reliability and crispness for more consistent accuracy. Fits Howa 1500, S&W 1500, and Weatherby Vanguard rifles. Includes built-in safety. SPECS: Steel housing and internals, black, matte finish. Smooth ¼” (6.4mm) wide trigger face. Fits Howa 1500, S&W 1500, and Weatherby Vanguard. Includes safety. Available in 14 oz., 19 oz., 22 oz., 26 oz., and 28 oz. pull weights.

HOWA & S&W 1500/WEATHERBY VANGUARD ADJUSTABLE TRIGGER JARD HOWA 1500 TRIGGER – 19 OZ $132 All-steel, single stage drop-in trigger provides adjustability not available in the factory trigger. Can be installed “as is” with no extra tuning, or can be adjusted with set screws for overtravel, sear engagement, and minor changes in pull weight. Safety can be adjusted to eliminate trigger motion as sear engagement is changed. Internals are precision machined and hardened to provide maximum reliability and crispness for more consistent accuracy. Fits Howa 1500, S&W 1500, and Weatherby Vanguard rifles. Includes built-in safety. SPECS: Steel housing and internals, black, matte finish. Smooth ¼” (6.4mm) wide trigger face. Fits Howa 1500, S&W 1500, and Weatherby Vanguard. Includes safety. Available in 14 oz., 19 oz., 22 oz., 26 oz., and 28 oz. pull weights.

HOWA & S&W 1500/WEATHERBY VANGUARD ADJUSTABLE TRIGGER JARD HOWA 1500 TRIGGER – 28 OZ $132 All-steel, single stage drop-in trigger provides adjustability not available in the factory trigger. Can be installed “as is” with no extra tuning, or can be adjusted with set screws for overtravel, sear engagement, and minor changes in pull weight. Safety can be adjusted to eliminate trigger motion as sear engagement is changed. Internals are precision machined and hardened to provide maximum reliability and crispness for more consistent accuracy. Fits Howa 1500, S&W 1500, and Weatherby Vanguard rifles. Includes built-in safety. SPECS: Steel housing and internals, black, matte finish. Smooth ¼” (6.4mm) wide trigger face. Fits Howa 1500, S&W 1500, and Weatherby Vanguard. Includes safety. Available in 14 oz., 19 oz., 22 oz., 26 oz., and 28 oz. pull weights.

Weatherby SA08 12 Gauge Semi Automatic Shotgun $449.99 The SA-08 is a reliable workhorse that lets you move from early season dove loads to the heaviest waterfowl loads in no time. Available in wood stock options in 12 and 20 gauge models, including a scaled down youth model, it will quickly become the only shotgun you’ll ever need.

Weatherby SA08 20 Gauge Semi Automatic Shotgun $449.99 The SA-08 is a reliable workhorse that lets you move from early season dove loads to the heaviest waterfowl loads in no time. Available in wood stock options in 12 and 20 gauge models, including a scaled down youth model, it will quickly become the only shotgun you’ll ever need.

WEATHERBY~: THE MAN. THE GUN. THE LEGEND. WEATHERBY,THE MAN. THE GUN. THE LEGEND $29.99 Grits Gresham and Tom Gresham. 290 pages. 7¼” x 10¼”. Hardbound. A complete guide to Weatherby rifles with a detailed, concise history that begins with Roy Weatherby, the man who started it all. Well written, easy reading and packed with delightful trivia, this narrative is simply hard to put down. Includes a separate reference section that lists serial numbers, dates, and manufacturers from the early Southgate’s and Sako rifles to all the variations of these classic guns, including FN’s, Sauer’s, Howa’s and the Athena shotguns.

MEDALIST? STOCK 2194-02 MAUSER 96 CLASSIC GUN STOCK TB $295.79 Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Browning A-Bolt features an aluminum pillar system instead of bedding block. Weatherby has a raised, Monte Carlo cheekpiece. SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½” (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate. Short Action (SA), Long Action (LA), Win Short Mag (WSM), Win

MEDALIST? STOCK 2193-02 MAUSER 98 CLASSIC GUN STOCK,TB $289.99 Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Browning A-Bolt features an aluminum pillar system instead of bedding block. Weatherby has a raised, Monte Carlo cheekpiece. SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½” (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate. Short Action (SA), Long Action (LA), Win Short Mag (WSM), Win

MEDALIST? STOCK 2961-02 REM 700 BDL S.A. STOCK, TB $295.79 Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Browning A-Bolt features an aluminum pillar system instead of bedding block. Weatherby has a raised, Monte Carlo cheekpiece. SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½” (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate. Short Action (SA), Long Action (LA), Win Short Mag (WSM), Win

MEDALIST? STOCK 2960-02 REM 700 BLD LA GUN STOCK, TB $295.79 Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Browning A-Bolt features an aluminum pillar system instead of bedding block. Weatherby has a raised, Monte Carlo cheekpiece. SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½” (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate. Short Action (SA), Long Action (LA), Win Short Mag (WSM), Win

BELTED MAGNUM CARTRIDGE HEADSPACE GAUGES .240 WEATHERBY MAG GO HEADSPACE GAUGE $30 With the exception of the .240 Weatherby Magnum, most belted, magnum cartridges are based on the .375 H&H Magnum case. Therefore, they all use the same headspace gauges. The following is a partial listing of those cartridges which use the same Belted Magnum Headspace Gauges: .257 Weatherby Mag., 6.5 Rem. Mag., .264 Win. Mag., .270 Weatherby Mag., 7mm Rem. Mag., 7mm Weatherby Mag., 7mm STW, .300 H&H Mag., .300 Weatherby Mag., .300 Win. Mag., .30-.338 Win. Mag., .308 Norma Mag., 8mm Rem., .338 Win. Mag., .340 Weatherby Mag., .350 Rem. Mag., .358 Norma Mag., .375 H&H Mag., .416 Rem. Mag., .458 Win. Mag.MIXING AND MATCHING BRANDS OF HEADSPACE GAUGES – Don’t do it!! That’s th

STOCK 407738 STOCK $51.36 STOCK

STOCK B3475640 STOCK $370.88 STOCK

STOCK B3475642 STOCK $370.49 STOCK

MEDALIST? STOCK #7778 TITANIUM BROWNING A-BOLT WSSM $295.79 Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Browning A-Bolt features an aluminum pillar system instead of bedding block. Weatherby has a raised, Monte Carlo cheekpiece. SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½” (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate. Short Action (SA), Long Action (LA), Win Short Mag (WSM), Win

Weatherby Nosler Ballistic Tip Ammunition $57.99 Weatherby has long included the legendary?and very effective?performance of Nosler? Partition? and Ballistic Tip? bullets in thier Weatherby Magnum ammunition. The Nosler Ballistic Tip features a polycarbonate tip that initiates maximum expansion at impact. A heavy jacket base acts as a platform for large diameter mushrooms. Nosler Ballistic Tip bullets are color-coded for each caliber. Provides incredible performance and down-range consistency. 20 rounds per box. NBT: Nosler Ballistic Tip

STOCK 503726 S/A STOCK 915Y $57.5 STOCK

BOLT ACTION RIFLE TRIGGER 651 WEATHERBY MARK V TRIGGER, BLUE $154.99 Adjustable, Featherweight-style, single-stage, replacement triggers for popular bolt action rifles deliver clean, crisp trigger pulls that help improve accuracy. Precision machined and hardened internal parts for maximum reliability. Adjustable for weight of pull (1½ – 4 lb.), creep and overtravel. Lock nuts hold settings. Winchester 70 fits Pre-and Post-64 Model 70; Model 54 requires gunsmith fitting. Uses factory safety. Ruger 77 fits models with tang safety, connects to Ruger safety button. Right hand only, will not fit current production Mk II. Sako Deluxe fits “A” Series L461, L579 & L61. Weatherby Mark V fits American made rifles such as Accumark, Deluxe, Sy SPECS: Aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250″ (6.3mm) wide shoe. All except CZ models include instructions.

HOWA 1500 TRIGGER 611 HOWA 1500 TIMNEY TRIGGER $112.99 Single-stage, replacement trigger for popular Weatherby and Howa rifles delivers clean, crisp trigger pulls that help make accurate shots possible. Precision machined and hardened internal parts for maximum reliability. Adjustable for weight of pull (1½ – 4 lb.) and creep. Lock nuts hold settings. Includes safety. Fits Weatherby Vanguard, Howa and S&W 1500. SPECS: Aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Grooved .250″ (6.3mm) wide shoe. Includes instructions.

Ram – Line® Syn – Tech™ Weatherby® Vanguard Long Action Synthetic Stock $69.95 ALL – WEATHER, super – tough Ram – Line Syn – Tech Synthetic Stocks! Wood stocks can warp, chip and collect scratches and dents like your Uncle Roy’s ‘63 Rambler! Step up to incredibly strong Ram-Line injection-molded, glass-filled polycarbonate. Actions just drop-in, no gunsmithing needed. Precision molded with free-floating barrel design for optimum accuracy. Have recoil pad and sling swivel stu…

Medalist? Stock Weatherby Vanguard Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish,…

What is the appraisal value of a new Weatherby Vanguard SMOA .300wsm Stainless with the Monte Carlo syn. stock?

According to GunBroker.com Weatherby Vanguard .300wsm are running around $571.99

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=148709932

APERTURE REAR SIGHTS 22-2015A-058-1 MAUSER REAR SIGHT $60 The potential accuracy of aperture sights with the sighting speed of open sights. All steel construction. Easy-to-install, fully machined, all-steel sights with windage and elevation-adjustable bases are pre-machined to fit quickly using the rear scope base holes on many popular rifles. A fast, accurate sight for brush hunting applications. Adjustments are secured with dual setscrews. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Marlin Lever and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use wi

APERTURE REAR SIGHTS 22-2082B-0009 RUGER MINI-14 RANCH $60 The potential accuracy of aperture sights with the sighting speed of open sights. All steel construction. Easy-to-install, fully machined, all-steel sights with windage and elevation-adjustable bases are pre-machined to fit quickly using the rear scope base holes on many popular rifles. A fast, accurate sight for brush hunting applications. Adjustments are secured with dual setscrews. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Marlin Lever and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use wi

RIFLE SIGHTS ML31618 AR-15 A1/A2 FRONT W/PEEP REAR $109.99 Easy-to-install replacement sights equipped with Meprolight’s standard, tritium insert with visibility is guaranteed for five years. All sights fit in the factory sight bodies. No alteration to the rifle. AR-15 rear sights feature a 2-dot peep with tritium inserts, plus normal peep sight. SPECS: Steel sight body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All are adjustable if barrel was originally equipped with factory adjustable sights.

M1/M14/M1A FRONT & REAR SIGHTS M14 REAR SIGHT ASSEMBLY $269.95 Heat-treated, 4130 chrome moly front and rear sights make it fast and easy to upgrade your original military sights for improved strength and accuracy. Parkerized finish reduces glare and helps deflect light for a clear, easy-to-acquire sight picture in all light conditions. Match front sights feature a narrow, .062″ wide front blade for a crisp, clean sight picture at all normal competition ranges. Standard models have a .079″ wide front blade to match original factory specifications. Rear aperature sight includes ½” MOA windage adjustments and range elevation marks for easy sight-in. Fits M1 Garand and M14/M1A. SPECS: Steel, Parkerized finish. Match Front – .062” (1.6mm) wide blade. Includes setscew. Standard Front – .079” (2mm) wide blade. Includes setscrew. Rear – .060” (1.5mm) I.D. aperature. Fits OEM dimensionally correct receivers.

SPORTING REAR SIGHTS 006300 MARBLE #63 SIGHT $19.95 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006301 MARBLE 63H SIGHT $19.95 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006400 MARBLE 64 SIGHT $19.95 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006401 MARBLE 64H SIGHT $19.95 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006500 MARBLE 65 SIGHT $19.99 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006600 MARBLE 66 SIGHT $19.99 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006601 MARBLE 66H SIGHT $19.95 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006700 MARBLE 67 SIGHT $19.99 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006701 MARBLE 67H SIGHT $19.95 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

SPORTING REAR SIGHTS 006800 MARBLE 68 SIGHT $19.95 Sporting Rear Sight Base with three styles of Uprights. Perfect as replacement sights for customizing the sight picture, or adding adjustment to fixed sight guns. Fits standard 3/8″ dovetails; available with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. SPECS: Dovetail Model – Total heights: #63 and 64, .275″ (7.1mm) – .505″ (12.4mm); #63H, 64H, 66H and 67H, .350″ (9.0mm) – .630 (16.0mm); #65, 66, 67 and 68, .300″ (7.6mm) -.510″ (12.9mm).

APERTURE REAR SIGHTS 222011B0002 MARLIN 1895 APERTURE REAR $60 The potential accuracy of aperture sights with the sighting speed of open sights. All steel construction. Easy-to-install, fully machined, all-steel sights with windage and elevation-adjustable bases are pre-machined to fit quickly using the rear scope base holes on many popular rifles. A fast, accurate sight for brush hunting applications. Adjustments are secured with dual setscrews. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Marlin Lever and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use wi

APERTURE REAR SIGHTS 22-2011A-000-2 MARLIN LEVER REAR SIGHT $60 The potential accuracy of aperture sights with the sighting speed of open sights. All steel construction. Easy-to-install, fully machined, all-steel sights with windage and elevation-adjustable bases are pre-machined to fit quickly using the rear scope base holes on many popular rifles. A fast, accurate sight for brush hunting applications. Adjustments are secured with dual setscrews. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Marlin Lever and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use wi

AK-47 TRITIUM NIGHT SIGHTS AK-47 TRITIUM REAR NIGHT SIGHTS $129.99 Two, self-illuminating, green, Trijicon® tritium inserts in the rear sight and one in the front post provide an easy-to-acquire, 3-dot sight picture during low light operations. Rear sight features click adjustments for windage and uses the same elevation increments as a standard issue AKM tangent rear sight. Elevation settings are calibrated for 7.62 x 39mm trajectory up to 1000 meters. Fine line serrations on rear blade surface cuts light reflection to enhance sight pick up. Front post has M6 x .075″ tpi thread for easy replacement with any standard issue front sight post. Front sight post and rear sight available separately. SPECS: Machined steel, black, matte finish. Front sight – M6 x .075” tpi thread. .33” (8.4mm) long, .12” (3mm) wide, .95” (24mm) high. .07” (1.8mm) O.D. green tritium dot. Rear sight – 2½” (6.3cm) long, .75” (19mm) wide, .11” (2.8mm) wide notch. Two .07” O.D. green tritium dots. Calibrated for 7.

MEPROLIGHT FRONT SIGHTS 10222F/10224F GLOCK FRONT ONLY $44 Single, front sights only. Re- place damaged units or stake-on models after refinishing. SPECS: Steel body, blue. Self-luminous lamp. Sights marked Adj. are for use with Meprolight Adjustable rear sights; all others are used with Meprolight Fixed sights.

FIRE SIGHTS 56359 GLOCK RED/GRN FIRE SIGHTS $49.95 Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will

FIRE SIGHTS 56360 RUGER RED/GRN FIRE SIGHTS $49.95 Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will

FIRE SIGHTS 56362 COLT RED/GRN FIRE SIGHTS $49.95 Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will

FIRE SIGHTS 60216 RUGER RED/GRN FIRE SIGHTS $49.95 Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the beads glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. SPECS: Aluminum body, black finish. Fiber optic insert. Includes front and rear sights. Ruger® GP100® also fits Redhawk® and Super Redhawk®. Ruger Mark II 678 fits 6-7⁄8″ long tapered target barrel, Ruger Mark II Bull Bbl. fits bull barrel. Ruger P-Series will

REAR SIGHTS TPU17GL07 TARGET REAR SIGHT GLOCK17/19 $67.55 Extra low profile, adjustable sight mounts down, out of the way and increases sight radius for enhanced sight picture. Rectangular body, raised adjustment screws. Requires no alteration to the slide, fits in the standard dovetail and uses the existing front sight. SPECS: CNC machined steel, matte blued finish.

REAR SIGHTS TPU92BE07 TARGET REAR SIGHT, BERETTA $67.55 Extra low profile, adjustable sight mounts down, out of the way and increases sight radius for enhanced sight picture. Rectangular body, raised adjustment screws. Requires no alteration to the slide, fits in the standard dovetail and uses the existing front sight. SPECS: CNC machined steel, matte blued finish.

REAR SIGHTS TPU40MK18 REAR SIGHT, COLT 1911 $67.55 Extra low profile, adjustable sight mounts down, out of the way and increases sight radius for enhanced sight picture. Rectangular body, raised adjustment screws. Requires no alteration to the slide, fits in the standard dovetail and uses the existing front sight. SPECS: CNC machined steel, matte blued finish.

REAR SIGHTS TPU95TA30 3-DOT REAR EAA/TANFOGLIO $67.55 Extra low profile, adjustable sight mounts down, out of the way and increases sight radius for enhanced sight picture. Rectangular body, raised adjustment screws. Requires no alteration to the slide, fits in the standard dovetail and uses the existing front sight. SPECS: CNC machined steel, matte blued finish.

REAR SIGHTS TPU92BE30 3-DOT REAR SIGHT, BERETTA $67.55 Extra low profile, adjustable sight mounts down, out of the way and increases sight radius for enhanced sight picture. Rectangular body, raised adjustment screws. Requires no alteration to the slide, fits in the standard dovetail and uses the existing front sight. SPECS: CNC machined steel, matte blued finish.

CAR-15/M4 FLIP-UP TACTICAL SIGHTS BROWNELLS FLIP REAR NIGHT SIGHT $99.99 Rugged flip-up sights provide instant backup when primary sight fails or weather conditions limit its use. Robust cross-bolt with oversized, slotted hex nut locks clamping block tightly to Picatinny accessory rail for zero sight movement. Clean, low profile design won’t snag on other gear when folded down. All models regulate with mil-spec A2 carbine sights or same-height aftermarket sights—perfect for co-witnessing with non-magnifying red dot and holographic optical sights. Precision machined from hardcoat anodized 6061 T6 aluminum and heat-treated 4140 steel for repeatable settings and the strength to handle the rigors of combat. A2 windage knob on rear sights provides precise ½ MOA adjust SPECS: 6061 T6 aluminum and 4140 steel, matte black. Standard Rear & Tritium Rear Sight – 1-3⁄8″ (3.5cm) overall length, 1-7⁄8″ (4.8cm) high (extended), 7⁄8″ (2.2cm) high (folded). 360 Series Rear – 1-3⁄8″ overall length, 1-7⁄8″ high (extended), 13&#82

M1/M14/M1A FRONT & REAR SIGHTS 2004 M14/M1A MATCH SIGHT $41.66 Heat-treated, 4130 chrome moly front and rear sights make it fast and easy to upgrade your original military sights for improved strength and accuracy. Parkerized finish reduces glare and helps deflect light for a clear, easy-to-acquire sight picture in all light conditions. Match front sights feature a narrow, .062″ wide front blade for a crisp, clean sight picture at all normal competition ranges. Standard models have a .079″ wide front blade to match original factory specifications. Rear aperature sight includes ½” MOA windage adjustments and range elevation marks for easy sight-in. Fits M1 Garand and M14/M1A. SPECS: Steel, Parkerized finish. Match Front – .062” (1.6mm) wide blade. Includes setscew. Standard Front – .079” (2mm) wide blade. Includes setscrew. Rear – .060” (1.5mm) I.D. aperature. Fits OEM dimensionally correct receivers.

M1/M14/M1A FRONT & REAR SIGHTS 3001 M1 GARAND MATCH FRONT SIGHT $41.67 Heat-treated, 4130 chrome moly front and rear sights make it fast and easy to upgrade your original military sights for improved strength and accuracy. Parkerized finish reduces glare and helps deflect light for a clear, easy-to-acquire sight picture in all light conditions. Match front sights feature a narrow, .062″ wide front blade for a crisp, clean sight picture at all normal competition ranges. Standard models have a .079″ wide front blade to match original factory specifications. Rear aperature sight includes ½” MOA windage adjustments and range elevation marks for easy sight-in. Fits M1 Garand and M14/M1A. SPECS: Steel, Parkerized finish. Match Front – .062” (1.6mm) wide blade. Includes setscew. Standard Front – .079” (2mm) wide blade. Includes setscrew. Rear – .060” (1.5mm) I.D. aperature. Fits OEM dimensionally correct receivers.

M1/M14/M1A FRONT & REAR SIGHTS M1 GARAND INTER’L HARVESTER FRT SIGHT $41.67 Heat-treated, 4130 chrome moly front and rear sights make it fast and easy to upgrade your original military sights for improved strength and accuracy. Parkerized finish reduces glare and helps deflect light for a clear, easy-to-acquire sight picture in all light conditions. Match front sights feature a narrow, .062″ wide front blade for a crisp, clean sight picture at all normal competition ranges. Standard models have a .079″ wide front blade to match original factory specifications. Rear aperature sight includes ½” MOA windage adjustments and range elevation marks for easy sight-in. Fits M1 Garand and M14/M1A. SPECS: Steel, Parkerized finish. Match Front – .062” (1.6mm) wide blade. Includes setscew. Standard Front – .079” (2mm) wide blade. Includes setscrew. Rear – .060” (1.5mm) I.D. aperature. Fits OEM dimensionally correct receivers.

M1/M14/M1A FRONT & REAR SIGHTS M14 STANDARD FRONT SIGHT $41.67 Heat-treated, 4130 chrome moly front and rear sights make it fast and easy to upgrade your original military sights for improved strength and accuracy. Parkerized finish reduces glare and helps deflect light for a clear, easy-to-acquire sight picture in all light conditions. Match front sights feature a narrow, .062″ wide front blade for a crisp, clean sight picture at all normal competition ranges. Standard models have a .079″ wide front blade to match original factory specifications. Rear aperature sight includes ½” MOA windage adjustments and range elevation marks for easy sight-in. Fits M1 Garand and M14/M1A. SPECS: Steel, Parkerized finish. Match Front – .062” (1.6mm) wide blade. Includes setscew. Standard Front – .079” (2mm) wide blade. Includes setscrew. Rear – .060” (1.5mm) I.D. aperature. Fits OEM dimensionally correct receivers.

RIFLE SIGHTS HK07 RIFLE FRONT & REAR 3-DOT SET $99 The ultimate, self-luminous rifle sight. Improves sight pickup and visibility during low-light hours when game is most active. All sights include the rugged Traser® luminous, sapphire crystal, tritium lamps for a bright, well-defined aiming point and extra-long life. Lamps guaranteed by the manufacturer to remain self-luminous for 12 years. SPECS: Steel body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All sights are adjustable if rifle or shotgun barrel was originally equipped with factory adjustable sights.

RIFLE SIGHTS CP25 TRIJICON AR-15 FRONT & REAR SIGHT $85 The ultimate, self-luminous rifle sight. Improves sight pickup and visibility during low-light hours when game is most active. All sights include the rugged Traser® luminous, sapphire crystal, tritium lamps for a bright, well-defined aiming point and extra-long life. Lamps guaranteed by the manufacturer to remain self-luminous for 12 years. SPECS: Steel body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All sights are adjustable if rifle or shotgun barrel was originally equipped with factory adjustable sights.

FIBER OPTIC SIGHTS for GLOCK~ GLOCK FIBER-OPTIC .040 INSERT-REAR $44.95 Precision machined, snag-free, steel front and rear fiber optic sights enable you to find the target quickly in all types of light conditions. Front sights replace Glock factory sights with screw-in installation and slightly angled front edge to prevent snagging. Tactical front sight covers both sides of light insert for maximum concealability; Competition front sight exposes more of the light rod for excellent light gathering capability. Rear sights are CNC machined to fit the factory dovetail and include a setscrew; machined light channels provide optimum ambient light gathering. Available with .040″ or .060″ diameter light inserts. Edges are dehorned and rounded to prevent d SPECS: Steel, blued, matte finish. Tactical Front – is .63” (1.6cm) long, .12” (.3cm) wide. Competition Front – is .63″(1.6cm) long, .12” (.3cm) wide. Both are available in red or green. Rear Sights are .66” (1.6cm) long, .72” (1.8cm) wide, .19” (.48cm) high, with .13” (3.3cm

FIBER OPTIC SIGHTS for GLOCK~ GLOCK FIBER-OPTIC .060 INSERT REAR $44.95 Precision machined, snag-free, steel front and rear fiber optic sights enable you to find the target quickly in all types of light conditions. Front sights replace Glock factory sights with screw-in installation and slightly angled front edge to prevent snagging. Tactical front sight covers both sides of light insert for maximum concealability; Competition front sight exposes more of the light rod for excellent light gathering capability. Rear sights are CNC machined to fit the factory dovetail and include a setscrew; machined light channels provide optimum ambient light gathering. Available with .040″ or .060″ diameter light inserts. Edges are dehorned and rounded to prevent d SPECS: Steel, blued, matte finish. Tactical Front – is .63” (1.6cm) long, .12” (.3cm) wide. Competition Front – is .63″(1.6cm) long, .12” (.3cm) wide. Both are available in red or green. Rear Sights are .66” (1.6cm) long, .72” (1.8cm) wide, .19” (.48cm) high, with .13” (3.3cm

RUGER~ REVOLVER ROUGH COUNTRY REAR SIGHTS BOWEN SQUARE-NOTCH REAR SIGHTS $89.95 Provides a rugged, highly visible replacement sight for current production Ruger revolvers using standard .350″ high rear sight. Solid, opposing-tension screws eliminate fragile click movements when making precise adjustments for windage and elevation. Reinforced sight body and a sturdy blade tenon provide extra blade support. Low-profile shape is machined from heat-treated steel alloy, then matte finished to eliminate glare. Blades interchange quickly and easily, without sight removal. Square-Notch features standard, .125″ (3.2mm) high square-notch/white-outline blade for use with conventional blade front sights. V-Notch provides shallow V-cut, white-post SPECS: Heat-treated steel alloy, black matte. Fits newer model Ruger revolvers with .350″ (8.9mm) high rear sight. Note – some Redhawks, Super Redhawks and GP-100 models are factory-fit with .390″ (9.9mm) rear sight and will require shorter front sight.

APERTURE REAR SIGHTS 22-2052A-000-1 WIN94 ANGLE EJECT SIGHT $60 The potential accuracy of aperture sights with the sighting speed of open sights. All steel construction. Easy-to-install, fully machined, all-steel sights with windage and elevation-adjustable bases are pre-machined to fit quickly using the rear scope base holes on many popular rifles. A fast, accurate sight for brush hunting applications. Adjustments are secured with dual setscrews. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Marlin Lever and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use wi

APERTURE REAR SIGHTS 22-2015C-202-1 REM 700 GHOST RING SGT $60 The potential accuracy of aperture sights with the sighting speed of open sights. All steel construction. Easy-to-install, fully machined, all-steel sights with windage and elevation-adjustable bases are pre-machined to fit quickly using the rear scope base holes on many popular rifles. A fast, accurate sight for brush hunting applications. Adjustments are secured with dual setscrews. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Marlin Lever and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use wi

ADJUSTABLE REAR SIGHTS STI SEMI AUTO ADJUSTABLE REAR SIGHT $54.99 Precision-machined steel rear sights give ideal sight picture for target or carry, with low profile and rounded contours that resist snagging. Flush-mounted, positive-click windage and elevation screws won’t get knocked from your selected settings. Flat blade with anti-glare serrations and wide notch provide a clear, fast sight picture that is easy to acquire under stress. Adjustable sits low on the slide for quick alignment, yet provides a precise sight image. Fits Bo-Mar BMCS slide cut. Tactical Adjustable combines the adjustability of a target sight with the compact, snag-free profile of a fixed tactical sight that fits a standard Novak rear sight slide cut. Beveled and rou SPECS: Steel, matte black finish. Installation may require milling, drilling, and tapping of slide. Adjustable – Blade: .434” (11mm) high, .762” (19.3mm) wide. Notch: .110” (2.8mm) wide. Fits Bo-Mar BMCS (BM#1) 60° x .359” cut. Tactical Adjustable – Blade: .325” (8.3mm) high, .690”

ADJUSTABLE REAR SIGHTS STI TACTICAL ADJ. NOVAK CUT REAR SIGHT $77.6 Precision-machined steel rear sights give ideal sight picture for target or carry, with low profile and rounded contours that resist snagging. Flush-mounted, positive-click windage and elevation screws won’t get knocked from your selected settings. Flat blade with anti-glare serrations and wide notch provide a clear, fast sight picture that is easy to acquire under stress. Adjustable sits low on the slide for quick alignment, yet provides a precise sight image. Fits Bo-Mar BMCS slide cut. Tactical Adjustable combines the adjustability of a target sight with the compact, snag-free profile of a fixed tactical sight that fits a standard Novak rear sight slide cut. Beveled and rou SPECS: Steel, matte black finish. Installation may require milling, drilling, and tapping of slide. Adjustable – Blade: .434” (11mm) high, .762” (19.3mm) wide. Notch: .110” (2.8mm) wide. Fits Bo-Mar BMCS (BM#1) 60° x .359” cut. Tactical Adjustable – Blade: .325” (8.3mm) high, .690”

TRITIUM HANDGUN SIGHTS KIMBER 3 DOT FRONT & REAR SIGHT SET $99 Nighttime and low light shooting tests prove sights equipped with these glowing dots are easier to see and more accurate than instinctive shooting with standard black sights. Rugged, heavy duty, Traser®, luminous, 3-Dot tritium lamps provide their own long-lasting energy source. Lamps are mounted in silicone-sealed, metal cylinders to give maximum protection from breakage or leakage. Polished sapphire, crystal windows give a bright, crisp and perfectly round aiming dot in low light. Inlaid white rings around each sapphire make the sights appear as standard white dots in daylight. Very narrow blades do not have the white ring and will look more like a plain black blade in daylight. Most can b SPECS: Steel, blued with tritium inserts. Sights listed as Adj. are adjustable sights to fit guns originally equipped with factory, adjustable sights. Sights listed as Fxd. fit guns originally equipped with factory, fixed sights. S&W models fit 3rd generation only, will

WGRS RECEIVER SIGHTS 70200 WGRS 336 REAR ONLY $37.95 In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16″ (4.8mm) Open Sight Blade.

AK-47 ADJUSTABLE NIGHT SIGHTS 860-961 AK47 TRITIUM ADJ. TANGENT REAR $139.95 Drop-in sights with genuine, Trijicon lamps feature polished quartz lenses, which make these sights the perfect upgrade for AK-47 rifles and variants used during low light periods. Sight bodies are EDM machined from rugged, 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered to retain the extra-tight tolerances. Rear sight fits AK-47, Norinco 56S, Mak-90, and Polytech AKS variants. Fine line serrations on the rear blade surface help cut glare in bright light conditions. Features click adjustments for windage and uses standard issue, tangent rear sight increments for elevation adjustments. Robust, Front post has M6 x.075″ tpi thread to replace standard issue front sigh SPECS: 4140 steel, blue, matte finish. .076” (1.9mm) diameter Tritium lamps.

ADJUSTABLE SIGHTS FOR RUGER~ P-85~ RP85008 3-DOT REAR RUGER P-85 $67.99 Fully adjustable, all-steel sights for semi-autos and revolvers to replace the often less-than-adequate factory fixed and adjustable sights. All the features demanded by top shooters, usually with no modifications to the gun. Carefully manufactured, fitted and finished in a deep, blue/black that blends well with any gun finish. ADJUSTABLE REAR SIGHTS – Blades are angled toward the shooter with grooved faces for positive glare prevention. Deep, positive notches and spring-loaded detent balls give crisp, clean windage and elevation adjustments. Anti-backlash feature in windage screw eliminates slop. Semi-auto models have a locking feature that compensates for dovetail variations. Rea Must use Millett Front Sight.

COWBOY FRONT & REAR EXPRESS SIGHTS .500 COWBOY EXPRESS FRONT ONLY $30 Get your Cowboy lever rife on target faster and enjoy higher overall scores. White dot express-style front sight works with either your factory rear or the exclusive low and shallow XS, ladder-adjustable rear “V”. Lower rear “V” provides extremely fast pick-up in all light conditions so you can knock down those steel cowboy targets even faster. Available either as a front sight only or as a complete front and rear assembly. Both versions include complete instructions plus two nylon try-sights to help establish required front sight height before actual sight installation. SPECS: All-steel, matte finish, black. Front/Rear Set includes .400″ (10mm) high front sight and adjustable rear assembly, adjustment ladder, two nylon try-sights, nylon sight punch and thread locking compound. Front Only- .500″ (12.3mm) high, .148″ (3.7mm) thick blade, nominal 3⁄8″ (9.mm)

HiViz Handgun Combo Sights $69.99 Combo includes front and rear sights View-friendly square profile for faster sight acquisition Durable LitePipes are recessed to eliminate ”halo” Clear overmold for protection GLOCK styles come with six interchangeable LitePipes, a carry case, and a changeout key Includes front and rear sights with a view-friendly square profile for faster sight acquisition, durable LitePipes are recessed to eliminate ”halo,” and a clear overmold for protection. GLOCK styles come with six interchangeable LitePipes, a carry case, and a changeout key.

Grs Aperture, Pre 1997 Grs Aperture, Pre 1997 GRS APERTURE, PRE 1997 Mfg: Benelli…

Sight Bead, Brass Sight Bead, Brass SIGHT BEAD, BRASS Mfg: Mossberg…

DDI A1.5 FIXED REAR SIGHT $94.50 …

HIV GLOCK REAR SIGHT 6.9 GREEN $74.25 …

Wgos/Wdos Blades Square 3/16 High Precision-made sight blades milled from high-tensile strength, rustproof alloy. Dovetailed windage and elevation adjustments have hardened gib locks. Make adjustments quickly by loosening one screw. No dovetailing of barrel necessary. Blades sold separately. Blades can also replace the aperture on WGRS sights. Mfg: Williams Gun Sight SPECS: Blades: aluminum, black anodized finish. Blade Height and…

Why do so many guns use such simple sights?

So many guns use a notch rear sight and post front. Simple, easy to use, yet huge margin for error. There are many other common ones but this was the sight on my gun that I recently upgraded. Aperture sights are much easier to get a good sight picture and get accurate shots down range faster in my opinion, which is why I switched to that. The only reason I can think of is cost. A notch and a post seem cheap…what’s your opinion?

Huge margin for error? What huge margin for error?

Sounds to me like you just never learned to use iron sights. If/when you ever do, you’ll realize they’re all you ever needed. Or, you could just go the “gangsta” route and stick a laser on it and not have to learn proper marksmanship at all.

PISTOL RACKS 30053 – 9 GUN PISTOL CAROUSEL $59.95 Lightweight racks store multiple pistols separately and damage free, plus keeps them organized and ready for instant use. Provides space saving efficiency that makes use of limited storage areas, perfect for the inside of your gun safe. Holds semi-autos and revolvers of any barrel length. 3-Gun Modular Rack is made from high-density, non-reactive foam to provide complete protection from bumps and dings. Easily supports the weight of three handguns, plus is resistant to lubricants and solvents. 7-Gun Stackable Rack is constructed from heavy-duty, welded steel wire with gun friendly vinyl coating and rubber feet for stability. High strength design easily supports the weight of SPECS: 3-Gun Modular Rack – High density foam, black. 7½” (19cm) long, 8” (20cm) wide, 6” (15cm) high. 7-Gun Stackable Rack – Steel frame, vinyl coated, grey. 14” (35.5cm) long, 4” (10cm) wide, 7½” high. 9-Gun Carousel – Polymer coated base, black with simulated wood grain

GUN STORAGE ACCESSORIES PISTOL GUNNYSOCK PAK OF 6 $33 The Rifle and Pistol Gunnysock protects without bulk. Rifle Gunnysock stretches to over 5 feet long, wide enough for scoped rifles. Pistol Sock stretches to over 25″ long. SPECS: 75% acrylic, 25% nylon. Sold in packages of six only.

PISTOL RACKS 30002 – 3 GUN MODULAR PISTOL RACK $14.95 Lightweight racks store multiple pistols separately and damage free, plus keeps them organized and ready for instant use. Provides space saving efficiency that makes use of limited storage areas, perfect for the inside of your gun safe. Holds semi-autos and revolvers of any barrel length. 3-Gun Modular Rack is made from high-density, non-reactive foam to provide complete protection from bumps and dings. Easily supports the weight of three handguns, plus is resistant to lubricants and solvents. 7-Gun Stackable Rack is constructed from heavy-duty, welded steel wire with gun friendly vinyl coating and rubber feet for stability. High strength design easily supports the weight of SPECS: 3-Gun Modular Rack – High density foam, black. 7½” (19cm) long, 8” (20cm) wide, 6” (15cm) high. 7-Gun Stackable Rack – Steel frame, vinyl coated, grey. 14” (35.5cm) long, 4” (10cm) wide, 7½” high. 9-Gun Carousel – Polymer coated base, black with simulated wood grain

PISTOL RACKS 30058 – 7 GUN STACKABLE RACK $19.95 Lightweight racks store multiple pistols separately and damage free, plus keeps them organized and ready for instant use. Provides space saving efficiency that makes use of limited storage areas, perfect for the inside of your gun safe. Holds semi-autos and revolvers of any barrel length. 3-Gun Modular Rack is made from high-density, non-reactive foam to provide complete protection from bumps and dings. Easily supports the weight of three handguns, plus is resistant to lubricants and solvents. 7-Gun Stackable Rack is constructed from heavy-duty, welded steel wire with gun friendly vinyl coating and rubber feet for stability. High strength design easily supports the weight of SPECS: 3-Gun Modular Rack – High density foam, black. 7½” (19cm) long, 8” (20cm) wide, 6” (15cm) high. 7-Gun Stackable Rack – Steel frame, vinyl coated, grey. 14” (35.5cm) long, 4” (10cm) wide, 7½” high. 9-Gun Carousel – Polymer coated base, black with simulated wood grain

INTERCEPT~ PISTOL CASE 31004-BALLISTIC DBLE GUN CASE W/INTERC $50 Padded case with Corrosion Intercept lining of copper and plastic sheeting protects your handgun against rust and mildew by neutralizing corrosive effects of humidity, vehicle exhaust, and salt air. Interior mesh allows increased air circulation for better absorption of corrosive vapors within the case. Double Pistol Case holds two large pistols with up to 6″ barrels in separate padded compartments, and includes exterior pockets for six magazines, plus one 12″ x 5″ gear pocket. All pockets have full length hook-and-loop closures to securely hold contents. Stout web handle allows comfortable carry. Pistol Case accepts pistols with up to 5″ barrel. Both lockable cases include p SPECS: Cordura nylon, black. Includes padlock with two keys. Double Pistol Case – 13” long, 7” (17.8cm) wide, 2½” thick. Pistol Case – 12” (30.5cm) long, 7” wide, 1½” (3.8cm) thick.

RedHead Aluminum Pistol Gun Cases $49.99 Padded shoulder strap Aluminum frame Heavy-duty corner protectors 1″ flat foam plus cutaway interior foam Full-length hidden hinge Tough aluminum outer skin covers a durable, hexagonal aluminum frame fortified with heavy duty corner protectors. Inner padding: 1″ flat foam plus cutaway interior foam. Full-length hidden hinge for superior security, plus heavy-duty keyed lockable latches. Cases feature a padded shoulder strap. 2-Pistol: 13″ x 10″ x 5″. 4-Pistol: 18″ x 13″ x 5″.

Toy Kentucky Pistol for Kids $9.95 Designed to look like the historic Kentucky pistol One-piece wood stock Steel barrel Blued die-cast parts Makes a great retro toy With this Toy Kentucky Pistol and a coonskin cap, your son or daughter is transformed into a 19th century explorer! Designed to look like the historic Kentucky pistol, this cap gun has a one-piece wood stock, steel barrel and blued die-cast parts. 13.5” long. Great retro toy featuring quality construction and a nod to mountain man history. A terrific gift for the child with an interest in American history.

SIGNATURE SERIES PISTOL CASE SIGNATURE PISTOL CASE $19.99 Eliminate nicks, dings, and damage that tarnish the appearance and performance of the guns you love with our Signature Series Gun Cases. When we developed this line, we combined the very best materials – 1000 Denier Cordura nylon, YKK zippers – with your ideas to create what we feel is the ultimate line of gun cases anywhere. Plus, they look amazing . . . like anything we put our name on, you know these are top-of-the-line. Each floatable case is water-resistant and durable to withstand spills, damp surroundings, and rough wear. Beneath the Cordura shell is a dual-layer of shock-absorbent foam cushioning to protect your guns from bumps, dings, and drops. Self-sealing, YKK zippers SPECS: Brown Cordura nylon shell, black Tricot interior. 12” (30.5cm) long, 8” (20.3cm) high, 1½” (3.8cm) thick when zipped.

AR-15/CAR-15/CAV-15 PISTOL CALIBER BUFFER PISTOL CALIBER AR-15 BUFFER $59.97 Drop-in replacement for factory buffer shortens stroke and reduces recoil on pistol caliber AR-15 conversions with collapsible M4 carbine-type stocks. Extra weight behind carrier reduces cyclic rate for improve controllability, feeding, and extraction on full-auto carbines. Self-contained unit with long head consists of long-wearing, precision-machined, cold-rolled Parkerized steel exterior, fully enclosed 8 oz. lead insert, and polyurethane bumper. Will not work with rifle caliber uppers. Installation of this buffer is mandatory on Cavalry Arms CAV-15 Mk II receivers converted to .45 ACP with the Hahn Precision Grease Gun Adapter to prevent receiver damage. SPECS: Cold-rolled steel exterior, Parkerized, matte dark gray; lead insert; polyurethane bumper. 3-11⁄16″ (9.4cm) long. Fits rifles and carbines with pistol caliber upper receiver and collapsible M4 carbine-type stock.

PISTOL CHAMBERING REAMERS 9MM LUGER RIMLESS PISTOL (B) FINISHER $65.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 357 MAG RIMMED PISTOL (C) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 357 MAX RIMMED PISTOL (B) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 38 S&W SPL RIMMED PISTOL (C) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 38 S&W SPL RIMMED PISTOL (B) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS .38 SUPER NONTE RIMMED PISTOL (B) FIN $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 40 S&W RIMLESS PISTOL (B) REAMER $65.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 10MM AUTO RIMLESS PISTOL (B) REAMER $65.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 44 MAG RIMMED PISTOL (C) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 44 MAG RIMMED PISTOL (B) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 44/40 RIMMED PISTOL (B) FINISHER $100.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 44 SPL RIMMED PISTOL (C) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 45 ACP RIMLESS PISTOL (C) FINISHER $85.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 45 ACP RIMLESS PISTOL (B) FINISHER $65.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 45 LONG COLT RIMMED PISTOL (C)FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 45 LONG COLT RIMMED PISTOL (B)FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 32 H&R MAG RIMMED PISTOL (C) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 32 H&R MAG RIMMED PISTOL (B) FINISHER $75.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 30 LUGER RIMLESS PISTOL (B) FINISHER $85.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

RedHead Pistol Rugs $9.99 Breathable storage for nearly any size handgun Locking zipper Padded and fully lined to protect gun’s finish Enjoy breathable storage for nearly any size handgun with RedHead Pistol Rugs. Plus, for safety, they all feature the unique YKK locking zipper. All are padded and fully lined. Assorted colors (no color choice). Imported.

PISTOL GRIP SP64576 PISTOL GRIP $15.99 PISTOL GRIP

DoskoSport Gun Guard DLX Hybrid X2 Two Pistol Case $34.99 The next generation of hybrid cases, the DoskoSport? Gun Guard? DLX Hybrid X2 Two Pistol Case provides high-impact protection for two pistols. This water- and dirt-resistant hybrid case combines high-impact, hard-shell protection with the forgiving foam protection of a soft case. Case features custom fit internal spacers, gel cushions, and a zippered closure. Padded hook ‘n’ loop handles and adjustable padded shoulder straps. Zippered pocket features four elastic clip loops. Color: Olive Drab Green. Dimensions: 13”L x 9”W x 5.42”D. Made in USA. Features: Superior hybrid protection delivers best features of hard and soft pistol cases Durable water- and dirt-resistant exterior Custom fit internal spacers Gel cushions Zippered closure Padded hook ‘n’ loop handles Adjustable padded shoulder straps Zippered pocket with four elastic clip loops Manufacturer model #: 10-14010.

PISTOL SCREWDRIVER SETS for GLOCK~ GLOCK SCREWDRIVER SET $24.95 On the bench or in the field, you’ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun’s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Two takedown bits for pistol itself and magazine, plus three bits and a .050″ Allen wrench for adjustable aftermarket sights. Check out the video demonstration of the Glock Pistol Scr SPECS: 6-3⁄16″ (15.7cm) long overall. 1¼” (3.2cm) diameter grip.

PISTOL CHAMBERING REAMERS .22 SHORT FINISHER $39.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

RedHead Rigid Vinyl Pistol Gun Cases $34.99 Anodized aluminum frame 1″ egg crate foam Full-length piano hinge Nylon support hinges A rigid vinyl skin envelopes a tough, rounded anodized aluminum frame that houses soft, buoyant 1″ egg crate foam to hold your guns safely and securely. Full-length piano hinge with nylon support hinges, plus rubberized non-slip handles. Cases feature a padded shoulder strap. Color: Black.

PISTOL GRIP AR-L130-64576 AR PISTOL GRIP $6.04 PISTOL GRIP

TACTICAL PISTOL 2 DVD TACTICAL PISTOL II DVD $34.95 Gunsite staff. 50 minutes. Filmed at one of the nation’s premier shooting schools, each tape covers choosing the proper weapon, presentation, carry, operation and function. Also includes a video practice session to help improve your skills. Analyzes gun handling skills to increase speed, movement and cover, plus weapon retention and vehicles, shooting and critical exit. DVD format only.

MATCH GRADE PISTOL BARREL BLANKS .475 PISTOL BARREL BLANK $120.43 Match-grade blanks for building monster caliber, custom handguns. Center-turned from 1.25″, 4140 chrome moly steel bar stock and stress relieved twice during manufacture. Pull-button rifled and hand-lapped with 1-18″ twist, 8-groove rifling. Perfect for building up a powerful hunting or silhouette gun in .475 Linebaugh, .480 Ruger, or .500 Linebaugh. SPECS: 4140 chrome moly steel, in-the-white. 1-18″ twist, 8-groove rifling. 9″ (22.86cm) long, 1.24″ (3.15cm) O.D. .475 blank – .475″ groove diameter. .510 blank – .510″ groove diameter for .500 Linebaugh caliber only.

PISTOL SCREWDRIVER SETS for GLOCK~ GLOCK SCREWDRIVER BITS ONLY $12.97 On the bench or in the field, you’ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun’s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Two takedown bits for pistol itself and magazine, plus three bits and a .050″ Allen wrench for adjustable aftermarket sights. Check out the video demonstration of the Glock Pistol Scr SPECS: 6-3⁄16″ (15.7cm) long overall. 1¼” (3.2cm) diameter grip.

PISTOL CASE 90070 PGC-CF PISTOL CASE, P SERIES $29.95 PISTOL CASE

Camo Hex Double Barrel Cap Toy Pistol $19.99 Features a solid one-piece wood stock Fires one cap at a time on each hammer Ages 4 and up Teach your kids about gun safety with this camouflage painted Toy Pistol. Perfect for the future outdoorsman, this cap gun features a solid one-piece wood stock, black hex die-cast barrels, die-cast double hammer and double action mechanism with single trigger. Fires one cap at a time on each hammer. Measures 10” long.

PISTOL CHAMBERING REAMERS CLYMER .17 HMR FINISHER REAMER $70.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS CLYMER 12 THROATER/.22 EXTENSION $35.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS FLOATING REAMER HOLDER W/#2 TAPER $100.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS CLYMER THROATER/.22 T-HANDLE $35.99 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 22 LONG RIFLE RIMFIRE FINISHER (C) $40.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

PISTOL CHAMBERING REAMERS 22 WRFM REVOLVER RIMFIRE FINISHER (C) $40.95 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: PISTOL REAMERS – 6, right-hand cutting, straight flutes. Solid pilot. Integral throat. Available in two different pilot diameters: Barrel for Single Shot or Semi-Auto pistol and rifle barrels; Cylinder for Revolver cylinders. 7/16″ dia. shank with 3/8 ” squar

Digital Safe Box for Home & Office — Steel Contruction $32.99 Keep your valuables out of reach with the Digital Electronic Safe Box. It keeps cash, jewelry, guns, documents and other valuables safe. It has heavy duty steel construction and allows key or keyless entry. Electronic keypad uses up to 8 digit secret PIN code….

Gunvault GV1000C-STD Mini Vault Standard Gun Safe $72.99 GV1000-STD Features: -Unique No-Eyes keypad for quick access. -Heavy gauge steel housing with tamper proof spring loaded door. -Built in computer blocks access after repeated invalid keypad entries. -’Learn Buttons’ make it easy to program over 12 million user selectable access codes. -Foam lining inside to protect the firearm or other valuables. -Improved high strength lock mechanism. -Califor…

HOMAK HS30003630 12-Gun Security Cabinet, Silver Vein $249.00 The 12 Gun Security Cabinet is manufactured using the highest grade of raw materials available. With a 7/8 inch steel thickness, this unit provides maximum organization using shelves and removable plastic bins. A four point tubular locking system includes two individually coded keys. Compatible with the Upper Add-On Gun Cabinet. (Shown in Black)…

My Daddy Was a Pistol & Im a Son of a Gun $9.98 …

Colt Single Action Army Complete Disassembly and Reassembly with Larry Crow (DVD) $37.75 Master gunsmith, Larry Crow, from Competitive Edge Gun Works shows you complete disassembly and reassembly of the Colt Single Action Army revolver along with cleaning and maintenance tips to help keep your Colt SAA running strong. He shares over 15 years expertise with special emphasis to Cowboy Action Shooters and shows you everything you need to know. If you own a Colt SAA, you will love this pr…

how do you disarm or defend yourself from someone holding a gun(pistol) to the side of your head?

If he’s behind you, with one arm wrapped around your neck and the gun pressed to the side of your head

the question should be
how to get shot by some one holding a gun to the side of your head. news at 11.

can you move faster then the bullet leaving the chamber? i think not.
if there that close to you, then chances are they are not planing on shooting you. they can do that from 10 feet away.

if they are mugging you give them your wallet its never worth your life.

Uncharted 2 Multiplayer Deathmatch: The Village (Shot gun, pistol) Part 2