Hays Shooting Sports: Recreational Firearms & Ammunitions
Shooting Sports Resources – Reviews – Supplies

Archive for the ‘Ammo & Gun Accessories’ Category

Hks Model

Sunday, September 5th, 2010

Shop Brownells.com


SPEEDLOADER CA-44 HKS SPEEDLOADER


SPEEDLOADER CA-44 HKS SPEEDLOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 32-J HKS SPEEDLOADER


SPEEDLOADER 32-J HKS SPEEDLOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 32-K HKS SPEEDLOADER


SPEEDLOADER 32-K HKS SPEEDLOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 10-A HKS SPEED LOADER


SPEEDLOADER 10-A HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 25-M HKS SPEED LOADER


SPEEDLOADER 25-M HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 27-A HKS SPEED LOADER


SPEEDLOADER 27-A HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 29-M HKS SPEED LOADER


SPEEDLOADER 29-M HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 36-A HKS SPEED LOADER


SPEEDLOADER 36-A HKS SPEED LOADER


$11.99


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER MK-3A HKS SPEED LOADER


SPEEDLOADER MK-3A HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER PYA HKS SPEED LOADER


SPEEDLOADER PYA HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 586A HKS SPEED LOADER


SPEEDLOADER 586A HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

SPEEDLOADER 587A HKS SPEED LOADER


SPEEDLOADER 587A HKS SPEED LOADER


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

HKS Speed Loaders


HKS Speed Loaders


$11.99


Load cartridges into revolver instantly. Used by law enforcement agencies worldwide. .38/.357 or .44 cal. A. Fits: S 10, 12, 13, 14, 15, 19, 64, 65, 66, 67; Taurus 80-82-65-66. B. Fits: (5 shot) S 36, 37, 38, 40, 42, 49, 60; Taurus 85. C. Fits: Colt? Mark 3, Mark 5, King Cobra; Ruger Security 6. D. Fits: S “L” Frame; Ruger GP100. E. Fits: S 29,629; Ruger Redhawk.

HKS Magazine Speedloader


HKS Magazine Speedloader


$4.99


Capable of loading 15 to 18 rounds easily. Load your magazines in seconds. Clips sold separately.

SPEEDLOADER HKS 57-M SPEEDLOADER, S&W 547, 57 & 58


SPEEDLOADER HKS 57-M SPEEDLOADER, S&W 547, 57 & 58


$11.5


Compact, lightweight carrier provides an excellent combination of reloading speed, secure carry and dependability. Cartridges are held securely until you’re ready, then release with just a twist of the knurled knob. Simple to load: turn the knob to the load position; set rounds in place; twist the knob to latch. Metal cam points move into place over the cartridge rims. To load the gun: guide the bullet noses into the cylinder, twist the knob and ammo instantly drops into place. SPECS: High-impact, black plastic body. Knurled aluminum knob. Aluminum latch. 1-7/16″ (3.6cm) high. Diameter varies 1-5/8″ (4.1cm) to 1-3/8″ (3.5cm). Weighs ¼ oz. (7 g) empty.

HKS Cordura Speed Loader Case


HKS Cordura Speed Loader Case


$16.99


Fits belts up to 2-1/4″ wide. Made in USA.

MAGAZINE ASSEMBLY, 10-ROUND, MODEL 422,622,2206,41 102620000 MODEL 422,622,2206,41 10-RND


MAGAZINE ASSEMBLY, 10-ROUND, MODEL 422,622,2206,41 102620000 MODEL 422,622,2206,41 10-RND


$34.99


MAGAZINE ASSEMBLY, 10-ROUND, MODEL 422,622,2206,41

BOLT STOP, MODEL 541 F14509 BOLT STOP


BOLT STOP, MODEL 541 F14509 BOLT STOP


$4.97


BOLT STOP, MODEL 541

BUTT STOCK, DEER MODEL B1221039 BUTT STOCK


BUTT STOCK, DEER MODEL B1221039 BUTT STOCK


$208.09


BUTT STOCK, DEER MODEL

TRIGGER PIN, PRACTICAL-90 MODEL B515547602TRIGGER PIN, PRACTICAL-90


TRIGGER PIN, PRACTICAL-90 MODEL B515547602TRIGGER PIN, PRACTICAL-90


$9.99


TRIGGER PIN, PRACTICAL-90 MODEL

WASHER MODEL 1200 F & FP C97162 WASHER MODEL 1200 F & FP


WASHER MODEL 1200 F & FP C97162 WASHER MODEL 1200 F & FP


$4.49


WASHER MODEL 1200 F & FP

UNITED STATES RIFLE MODEL OF 1917 U.S. RIFLE MODEL OF 1917 BOOK


UNITED STATES RIFLE MODEL OF 1917 U.S. RIFLE MODEL OF 1917 BOOK


$23.95


C.S. Ferris. 213 pages. 6” x 9”. Softbound. 122 photos. Provides collectors with information about the Model 1917, which until now has been hard-to-find. Details are explained on how to determine if a Model 1917 rifle is original, or period correct. Topics include stock and metalwork finish, dates of manufacture and serial number correlations, manufacturer and inspection markings, rebuild marks, and differences between manufacturers. Historic information on accoutrements such as bayonets, slings, grenade launchers, plus, discussion of post-WWI use of the rifle by U.S. troops and other countries.

MODEL II AR TRIGGER MODEL II AR TRIGGER


MODEL II AR TRIGGER MODEL II AR TRIGGER


$159.99


The Iron Ridge Arms Model II AR Trigger is manufactured as a heavy duty replacement for the ArmaLite AR-10, DPMS, LAR 308 and standard AR-15 designs. This trigger features a wide finger pad, dual springs and is manufactured from fully hardened A2 steel. It also features a 4-4.5 pound factory trigger pull. SPECS: Heat treated to 57 – 60 RC, Pins are .155 and heat treated to 62 RC, Wide finger pad, A2 steel.

WINCHESTER MODEL 12/1897 FOREND WRENCH MODEL 12 FOREND WRENCH


WINCHESTER MODEL 12/1897 FOREND WRENCH MODEL 12 FOREND WRENCH


$26.99


Re-designed and beefed up through the tips for greater strength to remove even the most stubborn Model 12/1897 Forend Caps. Tips are extra wide to give solid contact the full width of the slot, and have enough thickness to retain strength even after being reground to fit any extra narrow slots that you may come across. Designed by working gunsmiths for working gunsmiths, and shop-proven over a lot of years. Flat enough to go into your pocket for emergency field repairs. Fits 12 ga. only. SPECS: 2″ (5.10cm.) wide x 5″ (12.7cm) long overall.

RECOIL SPRING FOR 3-3/8 BBL MODEL M-06B RECOIL SPRING FOR 3 3/8 BBL MOD


RECOIL SPRING FOR 3-3/8 BBL MODEL M-06B RECOIL SPRING FOR 3 3/8 BBL MOD


$6.99


RECOIL SPRING FOR 3-3/8″ BBL MODEL

EXTREME SERIES GRIPS FOR 1911 OFFICERS MODEL ALUMINUM CHECKERED GRIP


EXTREME SERIES GRIPS FOR 1911 OFFICERS MODEL ALUMINUM CHECKERED GRIP


$63.99


The Hogue Extreme Series Grips are crafted from machined aluminum and fit Government model semi-automatic handguns. This model is available in a type III anodized matte black finish and features a checkered texture. SPECS: Black finish, checkered texture, fits standard 1911 model handguns.

C-R SPEED HOLSTERS MODEL A SPEED HOLSTER


C-R SPEED HOLSTERS MODEL A SPEED HOLSTER


$108.25


Ultra-lightweight, rail-style design provides open access to grip for a fast, unrestricted draw. Exclusive, safety-locking lever engages with a flick of your thumb. Fully adjustable for overall length, degree of rake, draw tension, height and outward cant. Fits all barrel lengths, with or without scopes and comps. Can be converted for left-hand use; clamps to belts up to 1-5⁄8″ wide. SPECS: Polyethylene plastic, black. 8.8 oz.(250 g) wt. Imported from South Africa. Includes 3mm and 4mm Allen wrenches. Model “A” fits 1911 Auto, all styles and models plus, many other guns with triggerguards from 3/8″ (9.5mm) to .453″ (11.5mm) wide. Model “G” fits all models of Glock.

BIPODS HARRIS MODEL 5 BI-POD ADAPTER


BIPODS HARRIS MODEL 5 BI-POD ADAPTER


$13.99


Mounts to QD swivel studs on bolt action and single-shot rifles for ultimate field accuracy. Won’t change zero; added weight steadies gun. Spring-loaded, telescoping legs adjust quickly, fold parallel to barrel for carrying. Series 1A2 bipods have solid base and do not swivel or rotate. Series S bipods rotate 45° for instant leveling on uneven ground. Buffer springs and adjustable tension on hinged base help eliminate tremor. All Models available in either Series. All Adapters fit either Series bipods. Not recommended for lever actions. SPECS: Aluminum and high carbon steel, anodized, black finish. Adjustment height range is from resting surface to center of bore. Height is noted in chart below. Model BR: For benchrest use. BRM has equally spaced height adjusting notches.Model H: For pron

BIPODS HARRIS MODEL 4 BI-POD ADAPTER


BIPODS HARRIS MODEL 4 BI-POD ADAPTER


$26.99


Mounts to QD swivel studs on bolt action and single-shot rifles for ultimate field accuracy. Won’t change zero; added weight steadies gun. Spring-loaded, telescoping legs adjust quickly, fold parallel to barrel for carrying. Series 1A2 bipods have solid base and do not swivel or rotate. Series S bipods rotate 45° for instant leveling on uneven ground. Buffer springs and adjustable tension on hinged base help eliminate tremor. All Models available in either Series. All Adapters fit either Series bipods. Not recommended for lever actions. SPECS: Aluminum and high carbon steel, anodized, black finish. Adjustment height range is from resting surface to center of bore. Height is noted in chart below. Model BR: For benchrest use. BRM has equally spaced height adjusting notches.Model H: For pron

BIPODS HARRIS MODEL 14 BI-POD ADAPTER


BIPODS HARRIS MODEL 14 BI-POD ADAPTER


$26.99


Mounts to QD swivel studs on bolt action and single-shot rifles for ultimate field accuracy. Won’t change zero; added weight steadies gun. Spring-loaded, telescoping legs adjust quickly, fold parallel to barrel for carrying. Series 1A2 bipods have solid base and do not swivel or rotate. Series S bipods rotate 45° for instant leveling on uneven ground. Buffer springs and adjustable tension on hinged base help eliminate tremor. All Models available in either Series. All Adapters fit either Series bipods. Not recommended for lever actions. SPECS: Aluminum and high carbon steel, anodized, black finish. Adjustment height range is from resting surface to center of bore. Height is noted in chart below. Model BR: For benchrest use. BRM has equally spaced height adjusting notches.Model H: For pron

SHERIFF'S MODEL BASE PIN SHERIFFS MODEL BASE PIN CFN BLUE


SHERIFF’S MODEL BASE PIN SHERIFFS MODEL BASE PIN CFN BLUE


$27.87


Short, knurled head allows 3⁄8″ more ejector travel to really kick those fired cases from the cylinder. Maximum size pin with locking set screw. SPECS: D416 stainless, silver finish or 4340 chrome moly, blue. Ruger Pins – .2495″ (6.34mm) OD.

SHERIFF'S MODEL BASE PIN SHERIFFS MODEL BASE PIN, CFN SILVER


SHERIFF’S MODEL BASE PIN SHERIFFS MODEL BASE PIN, CFN SILVER


$27.87


Short, knurled head allows 3⁄8″ more ejector travel to really kick those fired cases from the cylinder. Maximum size pin with locking set screw. SPECS: D416 stainless, silver finish or 4340 chrome moly, blue. Ruger Pins – .2495″ (6.34mm) OD.

FIRING PIN, .088 TIP, .45 OLD MODEL LF7 FIRING PIN, .088 TIP, .45 OLD MOD.


FIRING PIN, .088 TIP, .45 OLD MODEL LF7 FIRING PIN, .088 TIP, .45 OLD MOD.


$30.81


FIRING PIN, .088 TIP, .45 OLD MODEL

CARTRIDGE STOP/OP HANDLE SPRING, CURRENT MODEL CARTRIDGE STOP/OP HANDLE SPRNG CURRENT


CARTRIDGE STOP/OP HANDLE SPRING, CURRENT MODEL CARTRIDGE STOP/OP HANDLE SPRNG CURRENT


$3.55


CARTRIDGE STOP/OP HANDLE SPRING, CURRENT MODEL

MAGAZINE, CURVED BUTT PLATE, MODEL 4040PD 276470000 MAGAZINE, CURVED BUTT PLATE


MAGAZINE, CURVED BUTT PLATE, MODEL 4040PD 276470000 MAGAZINE, CURVED BUTT PLATE


$40.08


MAGAZINE, CURVED BUTT PLATE, MODEL 4040PD

BARREL, 28  , SHADOW GRASS, BASS PRO MODEL 1117105721 BARREL,PINTAIL,28,SHADOW G


BARREL, 28 , SHADOW GRASS, BASS PRO MODEL 1117105721 BARREL,PINTAIL,28,SHADOW G


$617.14


BARREL, 28 , SHADOW GRASS, BASS PRO MODEL

EXTRACTOR B3474768 EXTRACTOR MODEL 1885


EXTRACTOR B3474768 EXTRACTOR MODEL 1885


$45.26


EXTRACTOR

REVOLVER GRIPS RUGER SINGLE SIX OLD MODEL


REVOLVER GRIPS RUGER SINGLE SIX OLD MODEL


$34.95


Affordable, high-quality, mirror-perfect reproductions of hard-to-find grips for older-model revolvers are molded from polyurethane resin and finished by hand for a precise fit. Hard, durable resin looks and feels like the hard rubber or black plastic used for the original grips on many of these guns, and will not chip, shrink, or crack over time. Proprietary molding process uses the highest-quality molds cast from mint-condition original factory grips to ensure no unsightly air bubbles in the finished product. SPECS: Molded polyurethane resin, black. Minor fitting may be required.

SPRINGFIELD XD MATCH GRADE BARREL XD SERVICE MODEL BARREL: 9MM


SPRINGFIELD XD MATCH GRADE BARREL XD SERVICE MODEL BARREL: 9MM


$160


Economical, custom-grade barrels make it easy to improve accuracy from new pistols or restore it to those guns that are simply “shot out.” Precision machined from certified 416 stainless steel to deliver superior strength and accuracy. Broach cut rifling provides excellent accuracy with both copper jacketed and lead bullets. Fully chambered and throated to match grade standards, then crowned to proper length with an extended ramp for full case support. Semi drop-in design may require gunsmith fitting. Available for Springfield XD Service model in 9mm and Tactical model in 9mm or .45 ACP. SPECS: 416 stainless steel, natural, polished finish. Hardened to Rc 40-42. 4” Model 9mm – 4” (10 cm) long x .530” (1.3 cm) muzzle O.D., fits XD Service model. 5” Model 9mm – 5” (12.7 cm) long x .530” (1.3 cm) muzzle O.D., fits XD Tactical model. 5” Model .45 ACP – 5.01” (1

WINCHESTER MODEL 12 DOUBLE-ENDED FOREND WRENCH MODEL 12 DOUBLE-ENDED FOREND WRENCH


WINCHESTER MODEL 12 DOUBLE-ENDED FOREND WRENCH MODEL 12 DOUBLE-ENDED FOREND WRENCH


$34.99


Machined and hardened tips provide excellent grip and prevent damage to rusted or stubborn end caps. Can be used by hand or clamped in smooth-jawed vise for extra leverage. Fits all Winchester Model 12’s in 12, 16 and 20 gauge, ­including the Browning Reproduction in 20 gauge. SPECS: Machined from carbon steel, blued finish. 7″ (17.8cm) long, 1¼” (3.2cm) wide. Tips are hardened to Rc 45-50.

WIN MODEL 12 PRE-FINISHED REPLACEMENT SHOTGUN STOCK WIN MODEL 12 -20GA. FINISHED STOCK


WIN MODEL 12 PRE-FINISHED REPLACEMENT SHOTGUN STOCK WIN MODEL 12 -20GA. FINISHED STOCK


$75


Classic, American Walnut stocks are sanded and given a three-coat, Danish oil finish to provide excellent weather resistance and durability. Quality, straight-grained wood looks sharp and is easy to touch up if the stock is nicked or dinged. Includes plastic buttplate. 95% inletted and ready to install; only requires minor fitting. SPECS: Walnut, straight grain, no figure. Accepts original hardware. Matches factory length-of-pull. Includes installed plastic buttplate. Winchester 12 fits Model 12, 20 gauge only.

SPEEDLOADER HOLDER SAFARILAND CD-2 RELOADER HOLDER


SPEEDLOADER HOLDER SAFARILAND CD-2 RELOADER HOLDER


$12


Open design for minimum bulk; holds tightly. No snaps or covers. Vinyl padded inside. Holds Safariland or comparable HKS models. SPECS: Spring steel, black epoxy coated. CD-2 holds 5/6 shot medium and large frame loaders.

M16/AR-15 TAKEDOWN TOOLS BENCH MODEL PUSH PIN TOOL


M16/AR-15 TAKEDOWN TOOLS BENCH MODEL PUSH PIN TOOL


$7.49


High-impact plastic tools drive out the front and rear takedown pins or help get the magazine catch out from your M16/AR-15 without scratching or marring the metal. Pushtool for the takedown pins comes in two versions: a bench model or a handy key ring model. Magcatch tool compresses the spring to make removal of the magazine catch easier. SPECS: High-impact plastic, black.

VERSA POD 150-001 MODEL 1 VERSA-POD BIPOD


VERSA POD 150-001 MODEL 1 VERSA-POD BIPOD


$75.95


Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black.

VERSA POD 150-002 MODEL 2 VERSA-POD BIPOD


VERSA POD 150-002 MODEL 2 VERSA-POD BIPOD


$75.95


Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black.

American Fluorescent Misc fixture Model AF-HKS18W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family.


American Fluorescent Misc fixture Model AF-HKS18W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family.



American Fluorescent Misc fixture Model AF-HKS18W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family….


American Fluorescent Misc fixture Model AF-HKS24W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family.


American Fluorescent Misc fixture Model AF-HKS24W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family.



American Fluorescent Misc fixture Model AF-HKS24W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family….


American Fluorescent Misc fixture Model AF-HKS30W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family.


American Fluorescent Misc fixture Model AF-HKS30W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family.



American Fluorescent Misc fixture Model AF-HKS30W HK Series Lighting. Contemporary from the White finishes group in White Finish. Not Categorized category from the HKSeries family….


Hks Style Infiniti G35 02 03 04 05 06 Dual Catback Exhaust (2dr Only)


Hks Style Infiniti G35 02 03 04 05 06 Dual Catback Exhaust (2dr Only)


$425.99


03-06 INFINITI G35 (COUPE ONLY)FULL STAINLESS GT DUAL CATBACK

- comes with the extention for g35
- dual exhaust , real hp gain.15 hp.
- 100 % full polish stainless steel with polish finish
- CNC machine flanges for strong solid support
- TIG weld for strength and durability
- 2.5″ pipe size /4.5″ tip. comes with titanium tip cover.
- mandrel bend
- light weight (25 lbs lighter then stock) Increas…


Nissan Skyline GT-R R32 Group A 1993 HKS Skyline #87 1/18


Nissan Skyline GT-R R32 Group A 1993 HKS Skyline #87 1/18


$99.95




Hks Model
hks or greedy bov for my evo x?

and which model…
wich sounds better and will help my car

neither, if the car is stock. both will cause the car to run very rich between shifts and could make it stall. the car counts the air going going into the engine and if you vent it to atmosphere then the car is looking for air that is not there. it will cause problems. i would recommend to stay with the stock bov it is a good bov and will hold plenty of boost. good luck.



Terminator Models Part 1: T1s-HKs


Reproduction Tin Sign

Sunday, September 5th, 2010

Shop Brownells.com


Vintage Tin Signs - Game Load


Vintage Tin Signs – Game Load


$9.95


Perfect for the rustic home, cabin or lodge! This nostalgic Tin Sign features a reproduction of vintage Remington artwork. Learn the names of every member of wildlife pictured! All are labeled, with full names listed at the bottom. A fun way to introduce children to a variety of wildlife. This collectible tin sign makes a terrific gift for all ages. Measures: 12.5″W x 16″H.

Vintage Tin Signs - Express Riders


Vintage Tin Signs – Express Riders


$9.95


This Express Riders Vintage Tin Sign speaks to the cowboy! Perfect for the rustic home or cabin, this collectible reproduction of vintage Winchester artwork is sure to be a conversation piece. Measures 12.5″ x 16″. Makes a nice addition to any vintage tin sign collection. Also makes a terrific gift for any cowboy, cowgirl or nostalgia buff! Rely on Bass Pro Shops for quality home d?cor with an outdoor flair!

Vintage Tin Signs - Finders Keepers


Vintage Tin Signs – Finders Keepers


$9.95


These adorable pups are ready to go home with anyone who finds them! This Finders Keepers Vintage Tin Sign features classic Remington artwork. The perfect accent piece for a hunter’s lodge or home, this sign measures 12.5″ x 16″. This collectible reproduction of vintage Remington artwork makes a lovely gift for any dog lover or outdoors enthusiast. Rely on Bass Pro Shops for quality home d?cor with an outdoor flair!

Vintage Tin Signs - Bullet Board


Vintage Tin Signs – Bullet Board


$9.95


This Bullet Board Vintage Tin Sign is a handsome accent piece for any hunter’s lodge or cabin! Perfect for the hunter or gun enthusiast, this collectible reproduction of vintage Winchester artwork is sure to be a conversation piece. Measures: 16″W x 12.5″H. Makes a terrific gift for that hard-to-buy-for-person! Rely on Bass Pro Shops for quality home d?cor with an outdoor flair!

Vintage Tin Signs - True Blues


Vintage Tin Signs – True Blues


$9.95


Ever ready to please his owner, this hunting dog is ready to go to work! This True Blues Vintage Tin Sign has a place in any hunter’s lodge or cabin! It is also a nice accent piece for the home. Size: 12.5″ x 16″. This collectible reproduction of vintage Peters artwork makes a lovely gift for the hunter or outdoors enthusiast. Rely on Bass Pro Shops for quality home d?cor with an outdoor flair!

American Sportsman Sign  Buck Wear  Tin Sign - Potatoes & Gravy


American Sportsman Sign Buck Wear Tin Sign – Potatoes & Gravy


$9.99


Made from 100% tin Painted for impact Dimensions: 11.75” x 15.75” This humorous sign makes a perfect gift for the hard-core outdoorsman in your family or circle of friends! Fashioned from 100% tin and painted for maximum impact. Imported. Manufacturer item #: 40346.

American Sportsman Sign  Buck Wear  Tin Sign - Say Hello To My Little Friend


American Sportsman Sign Buck Wear Tin Sign – Say Hello To My Little Friend


$9.99


Made from 100% tin Painted for impact Dimensions: 11.75” x 15.75” This humorous sign makes a perfect gift for the hard-core outdoorsman in your family or circle of friends! Fashioned from 100% tin and painted for maximum impact. Imported. Manufacturer item #:41009.

American Sportsman Sign  Buck Wear  Tin Sign - I Don't Shoot Innocent Animals


American Sportsman Sign Buck Wear Tin Sign – I Don’t Shoot Innocent Animals


$9.99


Made from 100% tin Painted for impact Dimensions: 11.75” x 15.75” This humorous sign makes a perfect gift for the hard-core outdoorsman in your family or circle of friends! Fashioned from 100% tin and painted for maximum impact. Imported. Manufacturer item #:41115.

Vintage Tin Signs - Winchester Fishing Tackle


Vintage Tin Signs – Winchester Fishing Tackle


$9.95


This Vintage Winchester Tin Sign brings a dose of nostalgia to any wall. It’s sure to grab some attention hanging in the fishing cabin or lodge! Sign states: ”You’ll land him if you use Winchester Fishing Tackle.” Makes a nice addition to any fishing d?cor collection. For indoor or outdoor use. Made in the USA. Measures: 12-1/2″W x 16″H. Great gift idea for fishermen, nostalgia buffs and collectors.

TiN COATED DRILL #5 COATED DRILL BIT


TiN COATED DRILL #5 COATED DRILL BIT


$10.45


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #28 COATED DRILL BIT


TiN COATED DRILL #28 COATED DRILL BIT


$4.99


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #29 COATED DRILL BIT


TiN COATED DRILL #29 COATED DRILL BIT


$5.86


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #33 COATED DRILL BIT


TiN COATED DRILL #33 COATED DRILL BIT


$6.85


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #36 COATED DRILL BIT


TiN COATED DRILL #36 COATED DRILL BIT


$7.39


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #31 COATED DRILL BIT


TiN COATED DRILL #31 COATED DRILL BIT


$4.99


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #42 COATED DRILL BIT


TiN COATED DRILL #42 COATED DRILL BIT


$5.25


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #43 COATED DRILL BIT


TiN COATED DRILL #43 COATED DRILL BIT


$4.99


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL #45 COATED DRILL BIT


TiN COATED DRILL #45 COATED DRILL BIT


$6.5


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL 1/8 COATED DRILL BIT


TiN COATED DRILL 1/8 COATED DRILL BIT


$5.25


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL 3/16 COATED DRILL BIT


TiN COATED DRILL 3/16 COATED DRILL BIT


$6.35


TiN COATED DRILL SPECS: Jobber length.

TiN COATED DRILL 1/4 COATED DRILL BIT


TiN COATED DRILL 1/4 COATED DRILL BIT


$10.39


TiN COATED DRILL SPECS: Jobber length.

REPRODUCTION BUTTPLATES BUTTPLATES WIN M61,M67,M69,M72,M1910


REPRODUCTION BUTTPLATES BUTTPLATES WIN M61,M67,M69,M72,M1910


$14.95


High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane thatHigh-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane that’s resistant to most solvents. SPECS: Polyurethane, black.

REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER M1906


REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER M1906


$14.95


High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane that’s resistant to most solvents. SPECS: Polyurethane, black.

REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER 1897


REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER 1897


$14.99


High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane that’s resistant to most solvents. SPECS: Polyurethane, black.

REPRODUCTION BUTTPLATES BUTTPLATE STEVENS FAVORITE


REPRODUCTION BUTTPLATES BUTTPLATE STEVENS FAVORITE


$14.95


High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane that’s resistant to most solvents. SPECS: Polyurethane, black.

Authentic Models Marlin Trade Sign


Authentic Models Marlin Trade Sign


$295


Two-sided, 3D reproduction Hand-shaped and hammered by master tinsmiths Features an antique finish Dimensions: 49″ x 8″ x 23.5″ Trade signs were used by merchants in port to catch the attention of passing sailors, alerting them to the kind of services available. This original two-sided, 3D reproduction is hand-shaped and hammered by master tinsmiths and both sides are beautifully distressed for an antique finish. Manufacturer model #: TS008. Authentic Models Adjustable Trade Sign Mounting Bracket sold separately and can be found through item search for item number 38-955-154-64

Authentic Models Whale Trade Sign


Authentic Models Whale Trade Sign


$295


Two-sided, 3D reproduction Hand-shaped and hammered by master tinsmiths Features an antique finish Dimensions: 47″ x 12″ x 15″ Trade signs were used by merchants in port to catch the attention of passing sailors, alerting them to the kind of services available. This original two-sided, 3D reproduction is hand-shaped and hammered by master tinsmiths and both sides are beautifully distressed for an antique finish. Manufacturer model #: TS029 Authentic Models Adjustable Trade Sign Mounting Bracket sold separately and can be found through item search for item number 38-955-154-64

REPRODUCTION HANDGUN GRIPS C/5 COLT REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS C/5 COLT REPRODUCTION HANDGUN GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS B/7 BROWNING REPRODUCTION HAND GRIP


REPRODUCTION HANDGUN GRIPS B/7 BROWNING REPRODUCTION HAND GRIP


$19.5


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/9B COLT REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS C/9B COLT REPRODUCTION HANDGUN GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/8 COLT REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS C/8 COLT REPRODUCTION HANDGUN GRIP


$29.95


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/9A COLT REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS C/9A COLT REPRODUCTION HANDGUN GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/25 COLT REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS C/25 COLT REPRODUCTION HANDGUN GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/45 COLT REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS C/45 COLT REPRODUCTION HANDGUN GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/34 COLT WOODSMAN REPRODUCTION GRIP


REPRODUCTION HANDGUN GRIPS C/34 COLT WOODSMAN REPRODUCTION GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/39 COLT WOODSMAN REPRODUCTION GRIP


REPRODUCTION HANDGUN GRIPS C/39 COLT WOODSMAN REPRODUCTION GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS L/8 LUGER REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS L/8 LUGER REPRODUCTION HANDGUN GRIP


$28.6


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS S/3 SAVAGE REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS S/3 SAVAGE REPRODUCTION HANDGUN GRIP


$23.8


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS W/12 P-38 REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS W/12 P-38 REPRODUCTION HANDGUN GRIP


$35.6


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS W/14A WALTHER PPK REPRODUCTION GRIP


REPRODUCTION HANDGUN GRIPS W/14A WALTHER PPK REPRODUCTION GRIP


$41.95


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS W/28 WALTHER PP REPRODUCTION GRIP


REPRODUCTION HANDGUN GRIPS W/28 WALTHER PP REPRODUCTION GRIP


$23.8


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/46 COLT OFF'S REPRODUCTION HAND GRIP


REPRODUCTION HANDGUN GRIPS C/46 COLT OFF’S REPRODUCTION HAND GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION HANDGUN GRIPS C/25A  COLT REPRODUCTION HANDGUN GRIP


REPRODUCTION HANDGUN GRIPS C/25A COLT REPRODUCTION HANDGUN GRIP


$31.75


Modern, high-quality reproductions of the original grip panels make restoring that “turn-of-the-century” pistol or revolver easier and more authentic. Guaranteed to fit correctly and look “right” because the checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using CAD/CAM techniques and injection molding. SPECS: Black, high-impact, plastic. Grip screws and escutcheons are not included.

REPRODUCTION BUTTPLATES I11 ITHACA BUTTPLATE


REPRODUCTION BUTTPLATES I11 ITHACA BUTTPLATE


$16.6


Modern, high-quality reproductions of the original buttplates make restoring that special rifle or shotgun easier and the final job more authentic. Guaranteed to fit correctly and look “right” because the factory checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using modern CAD/CAM design techniques and high-speed, injection molding. SPECS: Black, high-impact, plastic.

REPRODUCTION BUTTPLATES M46 MAUSER BUTTPLATE


REPRODUCTION BUTTPLATES M46 MAUSER BUTTPLATE


$16.6


Modern, high-quality reproductions of the original buttplates make restoring that special rifle or shotgun easier and the final job more authentic. Guaranteed to fit correctly and look “right” because the factory checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using modern CAD/CAM design techniques and high-speed, injection molding. SPECS: Black, high-impact, plastic.

REPRODUCTION BUTTPLATES M47 MARLIN BUTTPLATE


REPRODUCTION BUTTPLATES M47 MARLIN BUTTPLATE


$16.6


Modern, high-quality reproductions of the original buttplates make restoring that special rifle or shotgun easier and the final job more authentic. Guaranteed to fit correctly and look “right” because the factory checkering patterns, company logos, borders and decorations have all been faithfully reproduced from the originals using modern CAD/CAM design techniques and high-speed, injection molding. SPECS: Black, high-impact, plastic.

45\ TiN COATED CYLINDER CHAMFERING CUTTER 5/8 X 45 TIN COATED CYL CHAMFER CUTTER


45\ TiN COATED CYLINDER CHAMFERING CUTTER 5/8 X 45 TIN COATED CYL CHAMFER CUTTER


$64.75


High-speed steel chamfer cutter makes perfect 45° angle cuts for easier cylinder filling with speed loaders. TiN coating on the cutting surface allows for smooth, chatter-free cuts and longer cutting life even on tough metals such as scandium. Also great for chamfering the muzzle on chrome-lined barrels. Available in ½” or 5/8″ sizes. SPECS: High-speed steel, TiN coating on cutting surface. Overall length: 2.4″ (61mm). Fits Brownells Muzzle and Cylinder Facing and Chamfering Tool Handle and Pilots.

45\ TiN COATED CYLINDER CHAMFERING CUTTER 1/2 X 45 TIN COATED CYL CHAMF CUTTER


45\ TiN COATED CYLINDER CHAMFERING CUTTER 1/2 X 45 TIN COATED CYL CHAMF CUTTER


$59.97


High-speed steel chamfer cutter makes perfect 45° angle cuts for easier cylinder filling with speed loaders. TiN coating on the cutting surface allows for smooth, chatter-free cuts and longer cutting life even on tough metals such as scandium. Also great for chamfering the muzzle on chrome-lined barrels. Available in ½” or 5/8″ sizes. SPECS: High-speed steel, TiN coating on cutting surface. Overall length: 2.4″ (61mm). Fits Brownells Muzzle and Cylinder Facing and Chamfering Tool Handle and Pilots.

REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER M12 16-20 GA


REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER M12 16-20 GA


$14.99


High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane that’s resistant to most solvents. SPECS: Polyurethane, black.

REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER M1894-PRE 1964


REPRODUCTION BUTTPLATES BUTTPLATES WINCHESTER M1894-PRE 1964


$14.99


High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane that’s resistant to most solvents. SPECS: Polyurethane, black.

Please Don't Let the Cat Out - No Matter What It Tells You, Vintage Funny Tin Sign


Please Don’t Let the Cat Out – No Matter What It Tells You, Vintage Funny Tin Sign


$8.98


You will be the envy of your friends when they see this fun sign. Your collectible tin sign will look great hanging in your bar, garage, game room or anywhere you want to hang it….

Have Another Cup of Coffee Metal Sign Tin Decor


Have Another Cup of Coffee Metal Sign Tin Decor


$11.49


Sign Reads: Have Another Cup Fresh Brewed
Bring a little vintage charm to the look of your home or business with this Fresh Brewed Coffee Metal Sign….

Baseball Topps Baseball Cards Tin Sign 1954 Nostalgic


Baseball Topps Baseball Cards Tin Sign 1954 Nostalgic


$9.99


Topps Baseball 1954 Great nostalgic Tin Sign Measures 12.5×16 Will stand out any wall. Includes pinholes in each corner for easy hanging….

Movie Classics


Movie Classics


$22.99


BRIGHT DOUBLE NEON CLOCKS with a color neon tube on the outside and a white neon color tube in the inside, with tin sign advertisement inside! Chrome finish metal case, 12v adapter included and the clock is battery operated. (Battery not included) Good for Kids room, Recreation rooms, Restaurants, Diners, Bars, Game rooms, Garages and anyplace in the home! Available colors: Red, Blue, Orange, Gree…

Neon Saxophone With A Stunning Blue Neon Light


Neon Saxophone With A Stunning Blue Neon Light



A beautiful 31” Long, Clear Saxophone With A Stunning Blue Neon Light In the Middle To Light Up Any Studio, Recreation room, Radio Station, Restaurant, Diner, Bar, Game room, Garage, Kids room, or anyplace in the home!…



Reproduction Tin Sign

Contemplating a 7 Dimension Theory of Everything

Is Life just a string of random chemical reactions and biological accidents or could there possibly be a theory of everything?

Frank Wilczek who is considered one of the world’s most eminent theoretical physicists has stated, “In recent months a different, much weaker notion of what a Theory of Everything might accomplish has gained ground, largely inspired by developments in string theory. In this concept, the Theory provides a unique set of equations, but those equations that have many solutions, which are realized in different parts of the Universe. One speaks instead of a multiverse, composed of many domains (dimensions), each forming a universe in itself, each with its own distinctive laws.”

Although I believe that the Universe and/ or the Mind of God is too mysterious, complex and constantly full of surprises to be boiled down to a simple formula for mankind to know, I have humbly attempted – just for fun – to take a stab at a Seven Dimensional Theory of Everything. Considering that the basic fundamental building blocks of our Universe appear to be based on 7 Dimensions and that health and wellness can be facilitated and mental and emotional healing can be enhanced by using alternative energy therapies, I propose the following Seven Dimensions theory that has helped me to better organize the information in my world and to better manage my own life.

When did it all Begin? 

In the 17th-century, an Anglican Bishop by the name of James Ussher deduced that the first day of creation began at nightfall Sunday October 27, 4004 BC. Refinements by others further pinpointed this to 9 a.m. London time, or midnight in the Garden of Eden.  Not everyone was excited by Bishop Ussher’s proclamation that the universe had a beginning however, as most believed since Aristotle’s time that the universe had always existed. The motivation for believing in an eternal universe was the desire to avoid invoking divine intervention.  Conversely, those who believed that the universe had a beginning, used it as an argument for the existence of God, as the first cause, or prime mover of the universe.  If one believed that the universe had a beginning, the obvious question was -  “What happened before the beginning?” (Stephen Hawkins, 2007). 

The Big Bang Theory 

Identifying the exact date and time of the origin of the universe sounds quite incredible to me, but the dominant scientific theory of the origin of the universe today is the “Big Bang” theory – which specifically indicates a point in time that the universe began.   According to the Big Bang theory, the universe was created approximately 13.7 billion years ago from the random, cosmic explosion (or expansion) of a subatomic ball that hurled space, time, matter and energy in all directions. Everything – the whole universe — came from an initial speck of infinite density (also known as a “singularity”). This speck (existing outside of space and time) appeared from nowhere, for no reason, only to explode (start expanding) all of a sudden. Over a period of approximately 10 billion years, this newly created space, time, matter and energy evolved into remarkably-designed and fully-functional stars, galaxies and planets, including our earth.

In other words, everything that we see, hear, taste, touch, and smell today was created in a single micro-second by a fraction of an atom that instantaneously exploded the four known forces of nature – gravity, electromagnetism, and strong and weak nuclear forces. These forces evolved into space, time, matter and energy. This energy evolved into complex stars that eventually exploded their chemically rich guts – including the Seven most abundant chemicals in the universe: hydrogen, helium, oxygen, carbon, neon, iron and nitrogen – enriching pristine gas clouds with the chemistry of life into the galaxy – forming planetary systems (including planet earth) from the swirling elements.  

To summarize then, the atoms that construct the molecules that make up our bodies – are traceable to the crucibles that were once the centers of the high mass stars. So we are all connected to each other biologically, to the earth chemically, and to the rest of the universe atomically. We are not just in the universe. We are part of the universe. We are in the universe and the universe is in us. 

The “Big Bang” is a scientific theory, and as such stands or falls by its agreement with observations. But as a theory which addresses the origins of reality, it has always been entangled with theological and philosophical implications. In the 1920s and ’30s almost every major cosmologist preferred an eternal universe, and several complained that the beginning of time implied by the Big Bang imported religious concepts into physics; this objection was later repeated by supporters of the Steady State theory. This perception was enhanced by the fact that George Lemaitre, who put forth the Big Bang theory was a Roman Catholic priest. It is not my intention to get into a theological debate on the existence of God in this article, but to initially put forth some background information that seemingly supports a 7- Dimension theory of everything. 

Background/ Historical Information  

The following series of sevens may just be some coincidental information, but I find them to be very interesting and supportive of a 7 Dimensional theory of everything. Note: The items in each column relate to each other multi-dimensionally, but do not necessarily relate to each of the items in the rows. 

A. Evolution: The Big Bang Theory appears to have seven distinct and interrelated phases, set by Science in the following order: 
1. Cosmic Evolution. The development of space, time, matter and energy from nothing. 
2. Stellar Evolution. The development of complex stars from the chaotic first elements. 
3. Chemical Evolution. The development of all chemical elements from the original two (hydrogen & helium). 
4. Planetary Evolution. The development of planetary systems from swirling elements. 
5. Organic Evolution. The development of organic life from inorganic matter. 
6. Macro-Evolution. The development of one kind of life from a totally different kind of life. 
7. Micro-Evolution. The development of variations within the same kind of life.

B. Physics: The scientific inherent physical laws of the universe indicate that there are seven fundamental forces of nature, seven electromagnetic energies, and seven colors in the visible light spectrum – that when randomly mixed make up all colors, and when equally contained make up the white sun light.

Forces of Nature: 1. Applied Force, 2. Gravitational Force, 3. Normal Force, 4. Frictional Force, 5. Air Resistance Force, 6. Tension Force, 7. Spring Force

Electromagnetic Energies: 1. Gamma rays, 2. X-rays, 3. Ultraviolet (UV) rays, 4. Visible light rays, 5. Infrared radiation, 6. Micro-waves, 7. Radio waves.

Visible Light Spectrum: 1. Red, 2. Orange, 3. Yellow, 4. Green, 5. Blue, 6. Indigo, 7. Violet

C. International Measurement Units: The International System of Units (SI) defines Seven SI base units 
for a set of physical quantities of measure, or dimensions, that are used to measure 7 basic physical 
properties and that define all other SI units, known as SI derived units. The set of Seven SI basic units 
consists of: 1. Metre – Length, 2. Kilogram – Mass, 3. Second – Time, 4. Ampere – Electrical Current,5. Kelvin – Temperature, 6. Mole – Quantity of Substance, 7. Candela – Luminous Intensity.

D. Electromagnetic Energies: Everything in the universe (including our bodies) are made of atoms that emit electromagnetic energy in the form of auras (colors) and that have string-like substances in them that are vibrating and emitting sound waves. Their are Seven auric bodies that surround our bodies, seven basic notes in music and seven musical vibrations that make up all music:

Auric Bodies: 1. Etheric, 2. Emotional, 3. Mental, 4. Astral, 5. Etheric Template, 6. Celestial, 7. Causal

Western Music Notes: 1. c, 2. d, 3. e, 4. f, 5. g, 6. a, 7. b

Vibrations: 1. Do, 2. Re, 3. Mi, 4. Fa, 5. Sol, 6. La, 7. Ti 

E. Ancient Astronomy/ Astrology: Prior to the invention of the telescope, humans could see seven heavenly bodies (planets) with the naked eye that are traditionally called the Seven Classical Planets. They were named after the seven days of creation documented in the Judeo-Christian Bible which are our present seven day weekly schedule. The Zodiac signs are also aligned with the planets. There are Seven daughters of Atlas in the Pleiades, also called the “Seven Sister Stars.” 

Classical Planets: 1. Sun, 2. Moon, 3. Mars, 4. Mercury, 5. Jupiter, 6. Venus, 7. Saturn

Week-days: 1. Sunday, 2. Monday, 3. Tuesday, 4. Wednesday, 5. Thursday, 6. Friday, 7. Saturday

Creation Days: 1st Day – Light, 2nd Day – Sky & Water, 3rd Day – Land & Seas, 4th Day – Sun, Moon & Stars, 5th Day – Fish & Birds, 6th Day – Animals, Man & Woman, 7th Day – God Rested

Zodiac Signs: 1. Gemini/ Cancer, 2. Taurus/ Leo 3. Aries/ Virgo, 4. Pisces/ Libra, 5. Aquarius/ Scorpio, 6. Saggitarius, 7. Capricorn 

F. Geology: Ancient peoples not only studied the earth, but they also studied their Solar System and they ascribed seven corresponding metals and gem stones to each of the seven naked-eye planets.  It’s also interesting to note that our planet has seven continents, seven oceans and seven seas:

Elements: 1. Earth, 2. Water, 3. Fire, 4. Air, 5. Sound, 6. Light, 7. Thought

Metals: 1. Gold, 2. Silver, 3. Iron, 4. Mercury, 5. Tin, 6. Copper, 7. Lead

Gem Stones: 1. Ruby, 2. Pearl, 3. Yellow Topaz, 4. Emerald, 5. Sapphire, 6. Diamond, 7. Amethyst

Continents: 1. Asia, 2. Africa, 3. North America, 4. South America, 5. Antartica, 6. Europe, 7. Australia

Oceans: 1. North Pacific, 2. South Pacific, 3. North Atlantic, 4. South Atlantic, 5. Indian, 6. Southern, 7. Arctic

Seas: 1. Persian, 2. Black, 3. Caspian, 4. Red, 5. Mediterranean, 6. Adriatic, 7. Arabian

G. Sacred Geometry: Some advanced ancient civilizations taught that sacred geometry held the blueprint of creation or the genesis of all form. They believed that it explained the energy patterns that create and unify all things and that on every scale, every natural pattern of growth or movement conformed to one or more geometric shapes. For example, the Seven tangent circles of the “Flower of Life” pattern creates a hexagon shape that represents one of natures most stable forms seen in convection cells of water, the bees honey comb, and even on planet Saturn’s north pole. Others believe that sacred geometric wisdom was responsible for the advanced technology of the ancient civilizations that designed the pyramids in Egypt, China, Machu Picchu, Nubia, Bosnia, and Mesoamerica. Some believe that this advanced technology was passed down from a super-human race of aliens/ angels (gods & goddesses) that intermarried with the beautiful women of the earth to produce off-spring that were giant-like gods (prior to the Great Food of Noah’s time). These half-human, half-god-like creatures were worshipped as gods (for example: Greek mythical Gods), and that this practice evolved into the polytheistic religions such as Hinduism.

H. Ancient Religions: The Romans, Greeks, and Hindus named their Gods and Goddesses after the Seven Classical Planets and our present week days.

Roman Gods: 1. Sol, 2. Luna, 3. Mars, 4. Mercurius, 5. Jupiter, 6. Venus, 7. Saturnus

Greek Gods: 1. Helios, 2. Selene, 3. Ares, 4. Hermes, 5. Zeus, 6. Aphrodite, 7. Chronos

Hindu Gods: 1. Surya, 2. Chandra, 3. Mangal, 4. Budha, 5. Guru, 6. Sukra, 7. Shani

I. Ancient Knowledge: Paracelsus (born Phillp von Hohenheim, in Switzerland in1493) – was the Father of Alchemy (the universal science of the time that developed what were to be the disciplines of biology, medicine, chemistry, physics and astronomy as well as psychology and philosophy).  He believed that the universe’s macrocosm was represented in every person as a microcosm. According to the insights at the time, there were Seven planets in the sky, and Seven Chakras in Man that were closely interrelated with the natural and social sciences. In the 5th Century AD, Martianus Capella academically defined the seven Liberal Arts as: grammar, dialectic, rhetoric, geometry, arithmetic, astronomy, and music.

Natural Sciences: 1. Astronomy, 2. Physics, 3. Chemistry, 4. Biology, 5. Geology, 6. Ecology, 7. Meteorology

Social Sciences: 1. Anthropology, 2. History, 3. Education, 4. Sociology, 5. Economics, 6. Psychology, 7. Linguistics

Liberal Arts: 1. Grammar, 2. Rhetoric, 3. Logic, 4. Geometry, 5. Arithmetic, 6. Music, 7. Astrology

Chakras: 1. Root, 2. Sexual, 3. Solar Plexus, 4. Heart, 5. Throat, 6. Forehead, 7. Crown

J. Eastern Spirituality: The word Chakra is Sanskirt (Hindu scriptures) for wheel and signifies one of seven basic energy centers in the human body that correspond to nerve ganglia branching out from the spinal column, as well as states of consciousness, developmental stages of life, archetypal elements, body functions, colors, and much, much more. They were first written down between 1200 – 900 BC, but had been passed down orally for approximately 1000 years prior to that. During the last 2000 years countless alchemists’ in India, China, Egypt, Europe, and those involved in eastern philosophies have used this holistic knowledge as a template for transformation. There are Seven worlds in the universe, seven seas in the world and seven gurus in Hindu mythology.

Energies: 1. Physical, 2. Sexual, 3. Ego, 4. Social, 5. Creative, 6. Mental, 7. Spiritual

Consciousness: 1. Self-preservation, 2. Self-gratification, 3. Self-definition, 4. Self-acceptance, 5. Self-expression, 6. Self-reflection, 7. Self-knowledge 

K. Western Spirituality: Alchemists believed that life energy is closely related to the ‘light of the seven planets.’ They proclaimed that everything on earth emerges from the rays or energies of these planets. Like a prisma, the planets divide the divine ‘light of creation’ into seven qualities related to the seven chakras to promote inner maturity, the development of consciousness, and spiritual healing. The most famous alchemical illustration of chakras and their planetary influences was conceived by Johann Georg Gichtel (1638 0 1710). In his illustration Gichtel arranged the seven classical planets on the human body and assigned each of them to one of the seven vices or deadly sins, such as pride, stinginess and jealousy (below) to compare them with the Seven Virtues for spiritual transformation.

Sins: 1. Lust, 2. Gluttony, 3. Laziness, 4. Envy, 5. Greed, 6. Anger, 7. Pride

Virtues: 1. Purity, 2. Temperance, 3. Diligence, 4. Kindness, 5. Charity, 6. Patience, 7. Humility 

L. World Religions: According to David Barrett et al, editors of the “World Christian Encyclopedia: A 
comparative survey of churches and religions – AD 30 to 2200,” there are 19 major world religions. In the year 2000, eight of these major religions had approximately 80% of the world’s population adhering to their beliefs. Agnostics and atheists account for approximately 19% of the world’s population and the rest of the world’s religions including Judaism make up the last 1%.

Most of the worlds’ religions do not fit neatly into little boxes, however, if we count the atheist and agnostic groups – they can be theoretically divided into Seven categories:

1. Atheist/ Agnostic groups 
2. Non-theistic Religions – The belief or faith not in God or Gods, but in supreme enlightenment: (Example: Buddhism) 
3. Pantheistic Religions – The belief that God and nature are one: (Example: Taoism, Animism, etc.) 
4. Monotheistic Religions – The doctrine or belief that there is only one God: 
(Example: Sikhism and the Abrahamic religions: Christianity, Islam, Judaism, etc.) 
5. Dualistic Religions – The belief that there are only two opposing Gods or two interacting forces: (Example: Zoroastrianism/ Taoism Yin/ Yang etc.) 
6. Polytheistic Religions – The worship of or belief in many Gods or Goddesses: (Example: Hinduism, Shintoism, etc.) 
Polyreligiousity – Having beliefs in multiple religion simultaneously (Example: Chinese Folk Religion/ New Asian Religions that combine Confucianism/ Buddhism/ Shintoism)

M. Monotheistic Religions: It’s interesting to note that approximately 81% of the people on this earth 
believe in a God or many Gods (minus the 19% that are agnostics and atheists), and that 66% believe in one God.

For thousands of years, the Holy Scriptures in the Judaic and Christian Bible and in the Islamic Koran have taught that there is One God. The Bible teaches that Melchizedek is the mysterious Eternal and Royal High Priest and King of Peace of all monotheistic religions – of which all subsequent religions evolved. All are called to be part of the Holy Nation and Royal Priesthood. The Apostle Paul devoted a whole chapter in the Bible to comparing Jesus to Melchizedek – repeating that Jesus was a High Priest forever in the order of Melchizedek. Some believe that Melchizedek was the appearance on earth of the pre-incarnate Christ in a temporary bodily form.

The book of Isaiah 11:2 specifically identifies the Seven Spirits of God: “The Spirit of the LORD will rest on him – the Spirit of wisdom and of understanding, the Spirit of counsel and of power, the Spirit of knowledge and of the fear of the LORD.” This verse proclaims the seven spirits of God…(1) Spirit of the LORD, (2) Spirit of wisdom, (3) Spirit of understanding, (4) Spirit of counsel, (5) Spirit of power, (6) Spirit of knowledge, (7) Spirit of the fear of the Lord. The Bible teaches that their are Seven basic Gifts and Seven fruits of the Holy Spirit.  In the book of Romans we are called to be faithful to the gift given us.  Not everybody has the same gift, but God distributes the gifts among the body, that we may all have a part in building up the body.  In Romans 12:6-8, Paul lists the seven basic gifts.

In Islamic tradition, there are Seven Heavens, Seven fires in Hell, and Seven doors to hell. Below, I have listed the Seven Spirits of God, the Seven Gifts of the Holy Spirit, and the Seven Fruits of the Holy Spirit with the Seven levels of Heaven according to the Jewish, Christian, and Islamic Holy Scriptures.

In the Judaism tradition, Seven is a highly spiritual number representing Godliness, and there are Seven days of passover, Seven days of purification, and the Seven branched candelabrum or Menorah.

N. Intelligences/ Vocational Interests: It’s also interesting to see a connection between Howard Gardner’s Seven Intelligences, the Seven Gifts of the Holy Spirit, and John Holland’s vocational interest theory that teaches that most people are one of six personality types: realistic, enterprising, artistic, social, conventional, and investigative. 

Intelligences: 1. Kinesthetic (Body-Smart), 2. Intra-personal (Self-Smart), 3. Visual/ Spatial (Picture-Smart), 4. Interpersonal (People-Smart), 5. Logical/ Math (Logic-Smart), 6. Verbal/ Linguistic (Word-Smart), 7. Musical (Music-Smart)

Vocational Types: 1. Realistic, 2. Enterprising, 3. Artistic, 4. Social, 5. Conventional, 6. Investigative, 7. (Ministry – Not identified by John Holland).

O. Technology: There are Seven tools of Quality, Seven logic gates, Seven layers in the Open System Interconnection Reference Model’s (OSI) computer network design, Seven individual segments in the seven-segment electronic device display, and Seven classes of plastics.

Quality Tools: 1. Fishbone diagram, 2. Pareto chart, 3. Check sheet, 4. Control chart, 5. Flow chart, 6. Histogram, 7. Scatter diagram

Logic Gates: 1. NOT, 2. AND, 3. OR, 4. NAND, 5. XOR, 6. NOR, 7. XNOR

OSI Layers: 1. Physical, 2. Data link, 3. Network, 4. Transport, 5. Session, 6. Presentation, 7. Application

Electronic Segments: 1. A, 2. B, 3. C, 4. D, 5. E, 6. F, 7. G 
Plastics: 1. PET, 2. PE-HD, 3. PVC, 4. PE-LD, 5. PP, 6. PS, 7. O 

P. Philosophy: Based on the types of questions that it asked, Philosophy can be divided into Seven different groups. Below is a list of these groups with some related questions. Any possible list of answers to these and other questions within these categories can be called a ‘philosophy’.

1. Ontology – What is reality? 
2. Philosophy of mind/ religion – What is a mind / consciousness? Is there a God? 
3. Epistemology – What is knowledge? 
4. Ethics – What is right and wrong / What is good and bad? 
5. Aesthetics – What is beauty? 
6. Logic – What is truth? 
7. Anxiology – What has value? 

Q. Psychology: Many psychological approaches have been developed in an attempt to explain human behavior related to specific life-functioning dimensions, each emphasizing one aspect of personality or another.

Psychological Theories: 1. Behavioral, 2. Psychodynamic, 3. Social Learning, 4. Psycho-social, 5. Behavioral Economics, 6. Cognitive-behavioral, 7. Moral

Major Psychological Theorists: 1. B.F. Skinner, 2. Sigmund Freud, 3. Albert Bandura, 4. Eric Erikson, 5. Daniel Kahneman, 6. Aaron, Beck, 7. Lawrence Kohlberg

Psychological Needs: 1. Safety, 2. Enjoyment, 3. Power, 4. Love, 5. Expression, 6. Self-actualization, 7. Wholeness 

R. Medicine:Modern science has established that the human bodies’ systems (e.g., nervous, endocrine, immune, etc.), must all contribute to a homeostatic system.  The bodies systems work together to maintain a balanced environment or equilibrium. When we are are feeling sick, our life energy cannot flow in and out freely and the physical body may suffer from stress.  An unhealthy diet, lack of exercise, substance abuse, isolation from family and friends and disconnection from our higher power may all contribute to decreasing our energy levels and further contributing to our unhealthy conditions. A multi-dimensional system can be correlated with Seven levels of health, Seven Abnormalities, Seven Glands and the bodies organ systems.

Health: 1. Physical, 2. Self-regulation, 3. Occupational, 4. Social, 5. Financial, 6. Mental, 7. Spiritual

Abnormalities: 1. Physical Suffering, 2. Irrationality/ Unpredictability, 3. Maladaptiveness, 4. Socially disconnected, 5. Societal Violations, 6. Emotional deviancy, 7. Spiritually disconnected

Glands: 1. Adrenal, 2. Gonads, 3. Pancreas, 4. Thymus, 5. Thyroid, 6. Pituitary, 7. Pineal

Organ Systems: 1. Skeletal/ Skin, 2. Reproductive, 3. Gastrointestinal, 4. Cardiovascular, 5. Respiratory, 6. Nervous/ Endocrine, 7. Immune/ Lymph

Senses: 1. Smell, 2. Taste, 3. Vision, 4. Touch, 5. Hearing, 6. Individual Consciousness, 7. Universal Consciousness 

S. The Nobel Prize-winning biologist David Baltimore devised the Baltimore classification system comprised of Seven groups of viruses: 1. dsDNA viruses (e.g. Adenoviruses, Herpesviruses, Poxviruses), 2. ssDNA viruses (e.g. (+)sense DNA (e.g. Parvoviruses), 3. dsRNA viruses (e.g. Reoviruses), 4. (+)ssRNA viruses (+)sense RNA (e.g. Picornaviruses, Togaviruses), 5. (-)ssRNA viruses (-)sense RNA (e.g. Orthmyxoviruses, Rhabdoviruses), 6. ssRNA-RT viruses (+)sense RNA with DNA intermediate in life-cycle (e.g. Retroviruses), 7. dsDNA-RT viruses (e.g. Hepadnaviruses)

T. Biology: Biologists teach us that there are Seven life processes for all living things. The 7 life processes are: 1. Movement (Moving), 2. Reproduction, 3. Sensitivity (Touching and Tasting), 4. Nutrition (Food), 5. Excretion (Going to the toilet), 6. Respiration (sweating), 7. Growth (Growing).

U. Chemistry: The periodic table of the chemical elements is a tabular method of displaying the chemical elements. There are Seven periods, or horizontal rows of elements, in the periodic table.

V. Genetics: This may be trivial, but it was not the lethal – 5 or 6 micro RNA gene family discovery that 
launched the RNA revolution that changed the face of modern biology, but the let – 7 gene family. It is now known that RNA control the chemistry of life, regulate cellular and genetic processes throughout the human body, and are critical factors in the determination of health, disease and longevity. 

W. Public Health Model: There are Seven Dimensions to the Public Health Model: 1. Universal, 2. Selective, 3. Indicated, 4. Case Identification, 5. Standard Treatment for Known Disorders, 6. Compliance with Long-term Treatment (Goal: Reduction in Relapse and Recurrence), 7. Aftercare (including Rehabilitation)

X. 7 – Dimension Model: In 2005, the “Addictions Recovery Measurement System (ARMS),” was published – describing the following seven life-functioning therapeutic activity dimensions for progress outcome measurements.  Each of the seven dimensions is interrelated with the public health models’ focus on the individual within the psychosocial environment. The above series of sevens are also interrelated with the following Seven Energies, Abraham Maslow’s famous Hierarchical Pyramid of Needs, and our Seven senses (and you were taught that we only had five). We need to consider that some individuals are more in touch with their extra-sensory perceptions.

Life-functioning Dimensions: 1. Medical/ Physical, 2. Self-regulation/ Impulse-control, 3. Educational/ Occupational, 4. Social/ Cultural, 5. Financial/ Legal, 6. Mental/ Emotional, 7. Spiritual/ Religious

Y. 7 – Dimension Intervention: This 7 – Dimensional health and wellness outcome measure was further 
developed into an assessment and treatment process for stress management incorporating the following three screening instruments:

Guidelines for implementing a 7 Dimension Intervention

1. Start the interview with the “Open question” technique to elicit as much detailed information as possible from the client, prior to administering any questionnaires or checklists (Utilize reflective listening skills, etc.). 
2. Administer the ACE questions and calculate the ACE score. 
3. Administer the 7D – PSI and calculate scores. 
4. Administer the 7D – TAS and calculate scores and plot all scores on the Wheel of Life to visualize the diathesis levels, current psycho-social stressor levels, and the current efforts to decrease stress and build resiliency. 
5. Administer the “Stages of Change” question: On a scale of 1 to 10 – with 10 representing the highest motivation for change that you have at this time, how motivated are you?

Pre-contemplation Stage = 1 – 3 
Contemplation Stage = 4 – 5 
Preparation Stage = 6 – 7 
Action Stage = 8 – 9 
Maintenance Stage = 10

6. Provide a “Motivational Interviewing” session with your client discussing the “Stages of Change.” The brevity of this article does not allow for an overview of this session (Tomlin, K. & Richardson, H., 2004)

7. Develop a holistic multidimensional health and wellness plan and a comprehensive individualized treatment plan if necessary along with a case management and treatment monitoring system. 

Z. Alternative Medicine/ Energy Therapies: Considering that our bodies have over 70 trillion cells with electrical properties, much like that of a battery, and that they totally regenerate approximately every Seven years, we must be proactive in developing and sustaining a proactive individual health and wellness plan. It’s also interesting to note that different cultures/ countries have different names for the same energy or Life Force.

LifeForces: 1. Africa (Ashe), 2. Hawaiian (Mana), 3. India (Prana, 4. Greece (Pneuma, 5. China (Chi), 6. Japan (Ki), 7. Christianity (Holy Spirit)

In view of the above, the following 7 – Dimension Energy Therapies and therapeutic activities are recommended to maintain the Seven energy levels.

Energy Therapies: 1. Chiropractor/ Osteopath/ Herbal Medicine, 2. Therapeutic Massage/ Reflexology, 3. Art Therapies, 4. Dance Therapies, 5. Music/ Singing Therapies, 6. Acupuncture/ Electric Medicine (Alpha-Stim), 7. Light Therapies/ Meditation/ Prayer

Summary

It’s interesting to note that from the farthest reaches of the cosmos to the atomic structure of a single cell within the body, the same dimensions of form and mathematics apply. The secret to life is in these forms and numbers. So by studying anything in life, we can learn the basis of all life everywhere. Modern scientists are reaffirming the ancient wisdom observed in their world and taught in their myths: that a consistent multidimensional design underpins every level of the universe, from atoms to the galaxies. 

7 Dimension Theory of Everything: Considering that the basic fundamental building blocks of our Universe are based on 7 Dimensions and that health and wellness can be facilitated and mental and emotional healing can be enhanced by using alternative energy therapies, I propose the following to better organize the information in my world and to better manage my own life: 

1. Everything has a beginning and an end that transforms everything into a new beginning. 
2. Everything from the microcosm to the macrocosm is made of 7 dimensions of energy. 
3. Everything is connected to everything multi-dimensionally. 
4. Everything is communicating positive and negative messages with everything multi-dimensionally. 
5. Everything is maintained by a holistic, dynamically balanced system with a multidimensional semi-stable equilibrium force field of driving and restraining forces. 
6. Everything disrupts everything when the system is disrupted by an unbalanced system. 
Everything is in the process of restoring balance to everything.

I also believe in synergy or the combined effects produced by two or more parts, elements or individuals that is a ubiquitous phenomenon in nature and human societies alike.

The 7 – Dimensional Law of Synergism

Whenever two or more dimensions are focused on simultaneously for a significant period of time and 
infinitesimally small, but positive incremental changes are made there is a positive synergistic effect 
(depending on the intensity of dark and/ or light energy manifested), that spiritually elevates and connects an individual’s multiple life functioning dimensions by reducing chaos and increasing resilience to bring an individual harmony, wellness, and productivity.

One last note:  I previously mentioned that it was not my intention to get into a theological debate on the existence of God in this article, but to initially put forth some background information that seemingly supports a 7- Dimension theory of everything. In light of the above, one must consider the possibility that the origin of the Universe could just be a random case of “Lucky Sevens.” If this is the case, then it would take more faith to believe in a God-less Big Bang – then it would to believe in divine intelligence.

About the Author

References: For more info see: http://www.7dimensions.net

James Slobodzien, Psy.D., CSAC, is a Hawaii licensed psychologist and certified substance abuse counselor who earned his doctorate in Clinical Psychology. He is credentialed by the National Registry of Health Service Providers in Psychology. He has over 25-years of mental health experience primarily working in the fields of alcohol/ substance abuse and behavioral addictions in hospital, prison, and court settings. He is an adjunct professor of Psychology and also maintains a private practice as a mental health consultant.

Rifle Sight Adjustment

Saturday, September 4th, 2010

Shop Brownells.com


SIGHT ADJUSTMENT TOOL 1234900 SIGHT ADJUSTMENT TOOL


SIGHT ADJUSTMENT TOOL 1234900 SIGHT ADJUSTMENT TOOL


$312.5


SIGHT ADJUSTMENT TOOL

SIGHT ADJUSTMENT SCREW, REAR W05900 REAR SIGHT ADJUSTMENT SCREW


SIGHT ADJUSTMENT SCREW, REAR W05900 REAR SIGHT ADJUSTMENT SCREW


$2.16


SIGHT ADJUSTMENT SCREW, REAR

SIGHT ELEVATION ADJUSTMENT SCREW 10660 SIGHT, ELEVATION ADJUSTMENT SCRW


SIGHT ELEVATION ADJUSTMENT SCREW 10660 SIGHT, ELEVATION ADJUSTMENT SCRW


$18.39


SIGHT ELEVATION ADJUSTMENT SCREW

SIGHT, FRONT, RIFLE/SLUG GUN F201994 FRONT SIGHT


SIGHT, FRONT, RIFLE/SLUG GUN F201994 FRONT SIGHT


$9.79


SIGHT, FRONT, RIFLE/SLUG GUN

SIGHT ADJUSTMENT SCREW, REAR, ELEVATION B3475298 SIGHT ADJ SCREW REAR ELEVATIO


SIGHT ADJUSTMENT SCREW, REAR, ELEVATION B3475298 SIGHT ADJ SCREW REAR ELEVATIO


$4.99


SIGHT ADJUSTMENT SCREW, REAR, ELEVATION

SIGHT WINDAGE ADJUSTMENT SCREW, REAR, BLUE E05903 REAR SIGHT WINDAGE ADJ. SCREW


SIGHT WINDAGE ADJUSTMENT SCREW, REAR, BLUE E05903 REAR SIGHT WINDAGE ADJ. SCREW


$3.58


SIGHT WINDAGE ADJUSTMENT SCREW, REAR, BLUE

AR-15 SHORT RANGE TACTICAL SIGHT SHORT RANGE TACTICAL SIGHT FOR HG


AR-15 SHORT RANGE TACTICAL SIGHT SHORT RANGE TACTICAL SIGHT FOR HG


$119.95


We first saw the detachable, JP-SRTS sight in action at a 3-gun, tactical match. Attaching this compact, secondary sight to a Picatinny mount on the side of the handguard gave AR-15 shooters the edge when engaging targets from point blank range out to 40 yards. The rigid aluminum bar supplements optics and other precise, long range sight setups required for the long-range stages. Once clamped in place (1 or 2 o’clock position recommended) simply cant the rifle to instantly acquire the A-2 style, front sight post. Dovetailed, rear notch provides plenty of windage adjustment; set front sight elevation using a standard, A2, front sight tool. Includes five, easy-to-see polym SPECS: Aluminum, matte black. 6″ (15.2cm) long, 5/8″ (1.6cm) wide, 1″ (2.5cm) high. 4 oz. (113g) wt.

WESSON & HARRINGTON LONG RANGE SIGHT WESSON & HARRINGTON LONG RANGE SIGHT


WESSON & HARRINGTON LONG RANGE SIGHT WESSON & HARRINGTON LONG RANGE SIGHT


$166.67


Precision-machined, buckhorn, rear sight and base include screws that fit the holes in your Wesson & Harrington rifle for drop-on, no gunsmithing installation. Slider has a detent that lets you feel each adjustment; setscrew locks into place. Ladder has side markings so you can easily repeat the right yardage settings. Drift adjustable for windage; setscrew locks your setting. SPECS: Machined steel, blued finish. Sight – Ladder has approximately 1-27⁄64″ (3.6cm) height adjustment; Buckhorn aperture 5⁄16″ (8mm) I.D. Base – 19⁄64″ (7.5mm) high from bottom of receiver to top of base, 2¾” (7cm) long, 5⁄8″ (15.9mm) wide.

RIFLE SIGHT SET TG110W REM RIFLE SIGHT SET


RIFLE SIGHT SET TG110W REM RIFLE SIGHT SET


$31


Combination red front and green rear provides eye-catching contrast for quick sight alignment. Fiber optic rods gather available light and draw your eye to the sights to get you on target fast. Machined aluminum body adjusts for windage and elevation. Front and rear set replaces factory sight without alteration or gunsmithing. Remington fits late production rifles and shotguns with adjustable sights. Ruger 10/22 fits factory barrels. Winchester 94 fits models with a front sight ramp. SPECS:Aluminum, black, matte finish. Front and rear set.

RIFLE SIGHT SET TG111W RUGER 10/22 RIFLE SIGHT SET


RIFLE SIGHT SET TG111W RUGER 10/22 RIFLE SIGHT SET


$37.61


Combination red front and green rear provides eye-catching contrast for quick sight alignment. Fiber optic rods gather available light and draw your eye to the sights to get you on target fast. Machined aluminum body adjusts for windage and elevation. Front and rear set replaces factory sight without alteration or gunsmithing. Remington fits late production rifles and shotguns with adjustable sights. Ruger 10/22 fits factory barrels. Winchester 94 fits models with a front sight ramp. SPECS:Aluminum, black, matte finish. Front and rear set.

RIFLE SIGHT SET TG112 WIN 94 RIFLE SIGHT SET


RIFLE SIGHT SET TG112 WIN 94 RIFLE SIGHT SET


$37.61


Combination red front and green rear provides eye-catching contrast for quick sight alignment. Fiber optic rods gather available light and draw your eye to the sights to get you on target fast. Machined aluminum body adjusts for windage and elevation. Front and rear set replaces factory sight without alteration or gunsmithing. Remington fits late production rifles and shotguns with adjustable sights. Ruger 10/22 fits factory barrels. Winchester 94 fits models with a front sight ramp. SPECS:Aluminum, black, matte finish. Front and rear set.

H&K USP/P2000 SIGHT ADJUSTMENT TOOL H&K USP SIGHT INSTALLATION TOOL


H&K USP/P2000 SIGHT ADJUSTMENT TOOL H&K USP SIGHT INSTALLATION TOOL


$131.99


Precision CNC machined tool safely removes, installs and adjusts fragile Tritium, front and rear night sights on H&K USP and P2000 pistols. Easy-to-use, just place your pistol slide in the tool, making sure the sight dovetail lines-up with the sight pusher, then turn the adjustment knob to clamp the slide in place. Turn the easy-to-grasp, hardened steel T-handle to slowly press the pusher tip against the sight and gently push the sight into the dovetail. Self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads help ensure smooth, precise sight adjustment. Specifically designed for use with fixed, front and rear, dovetailed Tritium night sights. SPECS: 6061 T6 Aluminum, anodized, red. Steel lead screw and adjustment knob, black matte finish. Body – 4¾” (21cm) long x 1-5⁄8" (1.9cm) wide. Fits factory and aftermarket, fixed front and rear sights on all full size & compact HK USP and P2000 pistols.

Nikon Buckmasters Rifle Scopes


Nikon Buckmasters Rifle Scopes


$209.99


Get out to the woods early and stay late with Nikon Buckmasters Rifle Scopes. 92% light transmission means you are covered, both early and late. All lenses treated with Nikon’s anti-reflective multicoating for increased performance. Hand-turn 1/4-MOA reticle adjustments for precise sight-ins and in-the-field adjustments. Quick-Focus eyepiece. Nitrogen filled and O-ring sealed for guaranteed waterproof, fogproof, and shockproof performance. Long-range models feature a Side Focus (SF) parallax adjustment, allowing fast, inconspicuous adjustments and reducing overall length. Matte or Silver finish. Full Lifetime Warranty. Nikoplex or Bullet Drop Compensating reticles. Nikon Buckmasters Rifle Scopes feature: Anti-reflective multicoating for 92% light transmission 1/4 MOA windage and elevation adjustment 100% waterproof, fogproof, and shockproof Lifetime warranty Standard or Bullet Drop Compensating reticles. FOV = field of view at 100 yards

B-SQUARE AK/SKS SIGHT ADJUSTMENT TOOL T1864 AK/SKS SIGHT ADJUSTMENT TOOL


B-SQUARE AK/SKS SIGHT ADJUSTMENT TOOL T1864 AK/SKS SIGHT ADJUSTMENT TOOL


$26.63


All steel, universal design give effortless windage and elevation adjustments on all makes and models of AK and SKS rifles. Convenient “T” handle wrench makes fast elevation changes. Sight pusher clamps to sight housing and moves the sight left or right without changing or removing the tool. SPECS: Steel, blue finish. Includes Allen wrench and instructions.

SPIRIT LEVEL TUNNEL FRONT SIGHT W/ INSERTS SIGHT INSERT SET (12) FOR CARTRIDGE


SPIRIT LEVEL TUNNEL FRONT SIGHT W/ INSERTS SIGHT INSERT SET (12) FOR CARTRIDGE


$14.99


Windage-adjustable, tunnel front sight comes with 12 interchangeable inserts so you can choose the sight picture that’s best for the distance and range of your target. The spirit level helps you hold the rifle completely upright to eliminate inaccuracies caused by tilting to the left or right. Perfect companion for the Creedmoor Rear Sights. Inserts available separately. Universal set includes 15 additional inserts for even broader choice of sight-picture options. Level Bubbles – Replacement bubbles in sets of 6, with two each of red, blue, and yellow-green. SPECS: Steel, blued. Sight – 1 ” (2.8cm) OAL, 1-13⁄32” (3.6cm) maximum width at adjustment knobs. Fits 3⁄8” (9.5mm), 60° dovetail. Instructions included.

SPIRIT LEVEL TUNNEL FRONT SIGHT W/ INSERTS 15 TUNNEL SIGHT UNIVERSAL INSERTS SET


SPIRIT LEVEL TUNNEL FRONT SIGHT W/ INSERTS 15 TUNNEL SIGHT UNIVERSAL INSERTS SET


$14.99


Windage-adjustable, tunnel front sight comes with 12 interchangeable inserts so you can choose the sight picture that’s best for the distance and range of your target. The spirit level helps you hold the rifle completely upright to eliminate inaccuracies caused by tilting to the left or right. Perfect companion for the Creedmoor Rear Sights. Inserts available separately. Universal set includes 15 additional inserts for even broader choice of sight-picture options. Level Bubbles – Replacement bubbles in sets of 6, with two each of red, blue, and yellow-green. SPECS: Steel, blued. Sight – 1 ” (2.8cm) OAL, 1-13⁄32” (3.6cm) maximum width at adjustment knobs. Fits 3⁄8” (9.5mm), 60° dovetail. Instructions included.

SPIRIT LEVEL TUNNEL FRONT SIGHT W/ INSERTS SPIRIT LEVEL TUNNEL SIGHT WITH INSERTS


SPIRIT LEVEL TUNNEL FRONT SIGHT W/ INSERTS SPIRIT LEVEL TUNNEL SIGHT WITH INSERTS


$152.38


Windage-adjustable, tunnel front sight comes with 12 interchangeable inserts so you can choose the sight picture that’s best for the distance and range of your target. The spirit level helps you hold the rifle completely upright to eliminate inaccuracies caused by tilting to the left or right. Perfect companion for the Creedmoor Rear Sights. Inserts available separately. Universal set includes 15 additional inserts for even broader choice of sight-picture options. Level Bubbles – Replacement bubbles in sets of 6, with two each of red, blue, and yellow-green. SPECS: Steel, blued. Sight – 1 ” (2.8cm) OAL, 1-13⁄32” (3.6cm) maximum width at adjustment knobs. Fits 3⁄8” (9.5mm), 60° dovetail. Instructions included.

RIFLE SIGHTS 31615 SIGHT ASSY COLT AR15/A1 FRONT


RIFLE SIGHTS 31615 SIGHT ASSY COLT AR15/A1 FRONT


$51


Easy-to-install replacement sights equipped with Meprolight’s standard, tritium insert with visibility is guaranteed for five years. All sights fit in the factory sight bodies. No alteration to the rifle. AR-15 rear sights feature a 2-dot peep with tritium inserts, plus normal peep sight. SPECS: Steel sight body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All are adjustable if barrel was originally equipped with factory adjustable sights.

RIFLE SIGHTS 34660 SIGHT ASSY REM 4,6,7400, 11-87


RIFLE SIGHTS 34660 SIGHT ASSY REM 4,6,7400, 11-87


$109


Easy-to-install replacement sights equipped with Meprolight’s standard, tritium insert with visibility is guaranteed for five years. All sights fit in the factory sight bodies. No alteration to the rifle. AR-15 rear sights feature a 2-dot peep with tritium inserts, plus normal peep sight. SPECS: Steel sight body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All are adjustable if barrel was originally equipped with factory adjustable sights.

SEMI-AUTO SIGHT MOVER MGW309 GLOCK SIGHT ADJUSTMENT TOOL


SEMI-AUTO SIGHT MOVER MGW309 GLOCK SIGHT ADJUSTMENT TOOL


$109.99


Safely moves fixed sights right or left in their dovetails without deforming slide or sight. Specifically designed for use with factory and aftermarket Tritium night sights, which are too fragile for the traditional hammer-and-punch sight installation method; works equally well with iron sights. Thumbscrew securely locks the slide so it’s fully supported in the rigid, machined aluminum body. Separate slots in the screw mechanism engage the sight and firmly, yet gently, concentrate screw force to loosen sights from even extremely tight dovetails. Hardened steel handle provides plenty of leverage, while self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads ensure smo SPECS: Aluminum body, anodized. Steel cross carriage bolt and thumbscrew, black oxide finish. Beretta/Glock – 4¾” (12.1cm) wide, 3” (7.6cm) high, ¾” (19mm) thick. 1911 Auto – 4¾” (12cm) wide, 3″ (7.6cm) high, ¾” (19mm) thick. SIG – 4¾” (12.1cm) wide, 5” (12.7cm) high, 1” (

RIFLE SIGHTS RE01 REM 74-7600, 870,1100 3-DOT SIGHT


RIFLE SIGHTS RE01 REM 74-7600, 870,1100 3-DOT SIGHT


$99


The ultimate, self-luminous rifle sight. Improves sight pickup and visibility during low-light hours when game is most active. All sights include the rugged Traser® luminous, sapphire crystal, tritium lamps for a bright, well-defined aiming point and extra-long life. Lamps guaranteed by the manufacturer to remain self-luminous for 12 years. SPECS: Steel body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All sights are adjustable if rifle or shotgun barrel was originally equipped with factory adjustable sights.

RIFLE SIGHTS RE02 REM 74-7600, 870,1100 FRONT SIGHT


RIFLE SIGHTS RE02 REM 74-7600, 870,1100 FRONT SIGHT


$75


The ultimate, self-luminous rifle sight. Improves sight pickup and visibility during low-light hours when game is most active. All sights include the rugged Traser® luminous, sapphire crystal, tritium lamps for a bright, well-defined aiming point and extra-long life. Lamps guaranteed by the manufacturer to remain self-luminous for 12 years. SPECS: Steel body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All sights are adjustable if rifle or shotgun barrel was originally equipped with factory adjustable sights.

RIFLE SIGHTS CP25 TRIJICON AR-15 FRONT & REAR SIGHT


RIFLE SIGHTS CP25 TRIJICON AR-15 FRONT & REAR SIGHT


$85


The ultimate, self-luminous rifle sight. Improves sight pickup and visibility during low-light hours when game is most active. All sights include the rugged Traser® luminous, sapphire crystal, tritium lamps for a bright, well-defined aiming point and extra-long life. Lamps guaranteed by the manufacturer to remain self-luminous for 12 years. SPECS: Steel body, blued. Tritium insert. Includes front and rear sight unless shown in chart. All sights are adjustable if rifle or shotgun barrel was originally equipped with factory adjustable sights.

#30 UNIVERSAL REAR SIGHT #30 UNIVERSAL REAR SIGHT 1.00 (XL)


#30 UNIVERSAL REAR SIGHT #30 UNIVERSAL REAR SIGHT 1.00 (XL)


$26.95


Barrel-mounted rear sight is machined from solid steel to deliver precise windage- and elevation-adjustable sighting while holding up under the toughest hunting conditions and heaviest recoil. Strong, stylish, ribbed base looks good on any rifle, slug gun, or muzzleloader. Screw tension locks the windage setting, and a spring-loaded push button release allows fast, easy elevation changes. Depress the button, move the slider to change setting, and release the button to lock the slider securely in position. Numbered, evenly spaced graduation lines stamped on right side of base ensure exact repeatability of settings. Elongated rear mounting hole in base accommodates center-to-center hole spacin SPECS: Steel, blued, semi-gloss finish. Base – 2½” (6.4cm) long x ½” (1.3cm) wide. Height Adjustment – .420” (10.7mm) to .520” (13.2mm). Fits ½” (13mm) up to 1” (2.5cm) center-to-center hole spacing. Two, 6-48 mounting screws included. Blades fit #30 Universal Sights only. Fiber

#30 UNIVERSAL REAR SIGHT #30 UNIVERSAL REAR SIGHT .775 (M)


#30 UNIVERSAL REAR SIGHT #30 UNIVERSAL REAR SIGHT .775 (M)


$26.99


Barrel-mounted rear sight is machined from solid steel to deliver precise windage- and elevation-adjustable sighting while holding up under the toughest hunting conditions and heaviest recoil. Strong, stylish, ribbed base looks good on any rifle, slug gun, or muzzleloader. Screw tension locks the windage setting, and a spring-loaded push button release allows fast, easy elevation changes. Depress the button, move the slider to change setting, and release the button to lock the slider securely in position. Numbered, evenly spaced graduation lines stamped on right side of base ensure exact repeatability of settings. Elongated rear mounting hole in base accommodates center-to-center hole spacin SPECS: Steel, blued, semi-gloss finish. Base – 2½” (6.4cm) long x ½” (1.3cm) wide. Height Adjustment – .420” (10.7mm) to .520” (13.2mm). Fits ½” (13mm) up to 1” (2.5cm) center-to-center hole spacing. Two, 6-48 mounting screws included. Blades fit #30 Universal Sights only. Fiber

SEMI-AUTO RIFLE FRONT SIGHT AR-15 STANDARD CROSSHAIR FRONT SIGHT


SEMI-AUTO RIFLE FRONT SIGHT AR-15 STANDARD CROSSHAIR FRONT SIGHT


$32


CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for improved accuracy at any range. Large diameter aperture offers a wide field of view that does not obscure target; gives a sight picture that’s like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. Non-hooded AR-15 sight is .082″ thick. Hooded sight has .250″ hood that shields crosshair from reflected light, offers greater crosshair protection for extreme duty use. STD, thin wire crosshair. Duplex, styled after the popular duplex scope reticle, improves low light visibility. AR-15 available as Hooded or non-hooded, fits M-16 and AR-10 r SPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD – .010″ (.25mm) wire, Duplex .010″/.020″ (.5mm) wire. .240″ (6.1mm) diameter aperture. HK 91 fits 91, 93, 94 MP-5, SP-89. 3/8″ Dovetail height measured from top of base to center of sight.

SEMI-AUTO RIFLE FRONT SIGHT AR-15 STD CROSSHAIR FRONT SIGHT


SEMI-AUTO RIFLE FRONT SIGHT AR-15 STD CROSSHAIR FRONT SIGHT


$32


CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for improved accuracy at any range. Large diameter aperture offers a wide field of view that does not obscure target; gives a sight picture that’s like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. Non-hooded AR-15 sight is .082″ thick. Hooded sight has .250″ hood that shields crosshair from reflected light, offers greater crosshair protection for extreme duty use. STD, thin wire crosshair. Duplex, styled after the popular duplex scope reticle, improves low light visibility. AR-15 available as Hooded or non-hooded, fits M-16 and AR-10 r SPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD – .010″ (.25mm) wire, Duplex .010″/.020″ (.5mm) wire. .240″ (6.1mm) diameter aperture. HK 91 fits 91, 93, 94 MP-5, SP-89. 3/8″ Dovetail height measured from top of base to center of sight.

SEMI-AUTO RIFLE FRONT SIGHT AR-15 DUPLEX, NO HOOD FRONT SIGHT


SEMI-AUTO RIFLE FRONT SIGHT AR-15 DUPLEX, NO HOOD FRONT SIGHT


$32


CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for improved accuracy at any range. Large diameter aperture offers a wide field of view that does not obscure target; gives a sight picture that’s like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. Non-hooded AR-15 sight is .082″ thick. Hooded sight has .250″ hood that shields crosshair from reflected light, offers greater crosshair protection for extreme duty use. STD, thin wire crosshair. Duplex, styled after the popular duplex scope reticle, improves low light visibility. AR-15 available as Hooded or non-hooded, fits M-16 and AR-10 r SPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD – .010″ (.25mm) wire, Duplex .010″/.020″ (.5mm) wire. .240″ (6.1mm) diameter aperture. HK 91 fits 91, 93, 94 MP-5, SP-89. 3/8″ Dovetail height measured from top of base to center of sight.

SEMI-AUTO RIFLE FRONT SIGHT AK-47/SKS DUPLEX FRONT SIGHT


SEMI-AUTO RIFLE FRONT SIGHT AK-47/SKS DUPLEX FRONT SIGHT


$32


CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for improved accuracy at any range. Large diameter aperture offers a wide field of view that does not obscure target; gives a sight picture that’s like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. Non-hooded AR-15 sight is .082″ thick. Hooded sight has .250″ hood that shields crosshair from reflected light, offers greater crosshair protection for extreme duty use. STD, thin wire crosshair. Duplex, styled after the popular duplex scope reticle, improves low light visibility. AR-15 available as Hooded or non-hooded, fits M-16 and AR-10 r SPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD – .010″ (.25mm) wire, Duplex .010″/.020″ (.5mm) wire. .240″ (6.1mm) diameter aperture. HK 91 fits 91, 93, 94 MP-5, SP-89. 3/8″ Dovetail height measured from top of base to center of sight.

RedHead  Ascent  Red Dot Air Rifle Sight


RedHead Ascent Red Dot Air Rifle Sight


$9.99


Easy to use red dot sight for today’s airguns Compact 4.4” sight Choice of red or green dot to match bright or low light shooting conditions Anti-reflective ruby red multi-coated optics Easy to access switch on side of sight Uses 3V lithium battery (included) Comes with rimfire rings Enjoy the clearer sight picture of a red dot sight for your airgun with the RedHead Ascent Red Dot Air Rifle Sight. This easy to use, compact 4.4” sight offers the choice of a red or green dot in your line of sight to match bright or lower light shooting conditions. Anti-reflective ruby red multi-coated optics deliver clear images. Durable ABS housing. Easy to access switch on side of sight. Uses 3V lithium battery (included). Lightweight 2.12 oz. Comes with rimfire rings. Black matte finish.

Nikon  Monarch  Rifle Scopes


Nikon Monarch Rifle Scopes


$649.99


Nikon Monarch Scopes – Totally Redesigned! While ruggedness and waterproof integrity are important virtues in a riflescope, it?s the absolute mechanical precision and overall optical perfection that separate Monarch scopes from all the others. The heart of the Monarch is the advanced Ultra ClearCoat? optical system, a proprietary blend of Nikon?s legendary glass and anti-reflective multicoatings that bump light transmission to the theoretical maximum. All feature quick-focus eyepieces and positive click hand-turn windage and elevation adjustments for convenience, speed and minimum motion. Manufacturer’s full lifetime warranty. It took Nikon 90 years to compile the data and invent the processes that created the Monarch, all the while challenging not only the limits set by others, but also the limits of optical science itself! Its reputation is anchored by Eye Box ocular technology, which boasts an impressive 4x zoom range and 4″ of constant, non-critical eye relief. With its massive ocular lens, the Monarch is able to deliver huge, exceptionally bright, high resolution sight picture and maximum field of view. The entire optical system is engineered to provide you with a bright, sharp, flat sight picture and light transmission up to 95%! At the same time, the length of each scope has been minimized, enabling it to be mounted on virtually any rifle. 1/4-MOA positive click reticle adjustments (1/8-MOA on 5?20×44 and 6?24×50 models) ensure confident sight-in and field adjustments. Interchangeable Turret Technology allows you to customize turret knobs and caps, and a locking side focus knob on the turret (except 2.5?10x models) allows for precise parallax adjustment maintenance at virtually any range. The rugged capabilities of each scope are guaranteed to perform at 100% waterproof, fogproof, and shockproof levels. Key: BDC = Bullet Drop Conpensating Reticle NP = Nikoplex Standard Reticle Nikon? BDC Reticle Nikon?s Bullet Drop Compensating (BDC) reticle compensates for trajectory to provide fast, simple aiming points for various shot distances. Unique system integrates a series of small ?ballistic circles?, each subtending 2″@100 yards, allowing unimpeded targeting. Provides aiming points out to 500 yards with a 100-yard sight-in for standard centerfire cartridges and 600 yards with a 200-yard sight-in for magnum cartridges. FOV = field of view at 100 yards, given in feet.

Barska Front Sight Adjustment Tool for AK/SKS - Barska AW11171


Barska Front Sight Adjustment Tool for AK/SKS – Barska AW11171



Barska Front Sight Adjustment Tool for AK/SKS – Barska AW11171 — Barska Universal Tool AK / SKS AW11171 Front Sight Adjustment Tools Rifle Scope Accessories The Barska Universal Gun AK / SKS Front Sight Adjustment Tools AW11171 are high quality tools at extremely affordable prices. These Barska Universal Gun AK / SKS Front Sight Adjustment Tools are engineered and manufactured using high strength…


Junior Rifle Handbook [ PR01-50M-558, Revised 1957 ] National Rifle Association (Includes: The National Junior Marksmanship Program, the NRA, Chartered Junior Rifle Clubs, Stop for Safety's Sake, A Safe Place to Shoot, Code of the Junior Rifleman, Equipment, Targets, Sighting and Aiming, Shooting Positions, NRA Junior Rifle Awards, Lapel Buttons, Brassards, Holding the Breath, Trigger Squeeze, Calling the Shot, Sight Adjustment, Care of the Rifle, NRA Junior Qualification Courses, NRA Junior Rifle Awards, NRA Qualification Course, Game Target Shooting Practice, Air Gun Shooting, etc.)


Junior Rifle Handbook [ PR01-50M-558, Revised 1957 ] National Rifle Association (Includes: The National Junior Marksmanship Program, the NRA, Chartered Junior Rifle Clubs, Stop for Safety’s Sake, A Safe Place to Shoot, Code of the Junior Rifleman, Equipment, Targets, Sighting and Aiming, Shooting Positions, NRA Junior Rifle Awards, Lapel Buttons, Brassards, Holding the Breath, Trigger Squeeze, Calling the Shot, Sight Adjustment, Care of the Rifle, NRA Junior Qualification Courses, NRA Junior Rifle Awards, NRA Qualification Course, Game Target Shooting Practice, Air Gun Shooting, etc.)




ORIGINAL PATENT APPLICATION NUMBER 6,178 FOR IMPROVEMENTS IN RIFLE-SIGHTS AND IN MEANS FOR THEIR ADJUSTMENT (LONDON).


ORIGINAL PATENT APPLICATION NUMBER 6,178 FOR IMPROVEMENTS IN RIFLE-SIGHTS AND IN MEANS FOR THEIR ADJUSTMENT (LONDON).




Instapark™ WEAVER MOUNT GREEN LASER SIGHT SYSTEM WITH PRESSURE SWITCH AND MANUAL ON/OFF SWITCH


Instapark™ WEAVER MOUNT GREEN LASER SIGHT SYSTEM WITH PRESSURE SWITCH AND MANUAL ON/OFF SWITCH


$39.77


High quality tactical green laser sight. * Improve your accuracy with this laser sight system
* Laser sight for rifles produces a green laser dot for extreme sighting accuracy
* Rifle sight made of tough lightweight aluminum…

New Shooters Ridge Steady Point Shooting Rest W/ Vise Quick Major And Minor Elevation Adjustment


New Shooters Ridge Steady Point Shooting Rest W/ Vise Quick Major And Minor Elevation Adjustment


$60.52


If you spend time on the prairie varmint hunting, you know how important it is to have a steady rest. Like to test your range a bit out there? Take along the Steady Point Rest with Gun Vise to ensure you’re confident and on the money….



Rifle Sight Adjustment
i had my rifle scope bore sighted. i shot a group. and i need to make adjustments.?

to move it up do I turn adjustment clockwise or c-cw. to move it to the left do i turn the adjustment clockwise or c-cw? this stupid manuel does’nt say and i can’t make out the stamped adjustment knob. Please help me!

when sighting your gun step off 25 yards to target– it will equal 100yds. set the elevation first and usually on scope Will have up/down arrow,(and prob right clicking will be up) and usually shoot in gropes of 3 rounds, and check target for accuracy of gun, the 3 group will maybe tell you if you are jerking the trigger.HOLD THE GUN steady from bench rest, to make sure of a steady hand. after getting the elevation then go left or right.. if impact hole is left ;adjust to right (cw) .. or visa/verse. hitting the target.,in the 3 groups of firring 9 to 12 rounds should put you in bulls eye. then practice/prat ice will help keep you in tune . good shooting

Laser Weaver

Saturday, September 4th, 2010

FLASHLIGHT/LASER MOUNT 5 POSITION FLASHLIGHT/LASER MOUNT


FLASHLIGHT/LASER MOUNT 5 POSITION FLASHLIGHT/LASER MOUNT


$29.99


Flashlight/laser mount pivots and locks into five positions, up to 90 degrees left or right of center, allowing you to quickly reposition your laser sight or flashlight if the tactical situation dictates. Use one mount for both your rifle and pistol; spring-loaded push-button provides fast installation and removal on both Picatinny and Weaver-style rails, separate locking bars included. Integral mounting ring firmly clamps 1″ diameter lights or laser sights. Made from high strength, durable fiber-filled polymer composite. SPECS: Fiber-filled polymer composite, black. 2¾” (7cm) long, 1½” (3.8cm) wide, 2½” (6.3cm) high. 2.8 oz. (79g) weight. Fits 1” O.D. flashlight/laser.

RedHead  Ascent  Airgun Laser Sight


RedHead Ascent Airgun Laser Sight


$29.99


Shock-resistant Lightweight ABS housing Push-button switches Weaver -style mount Shock-resistant, lightweight ABS housing; push-button switches, Weaver -style mount. Uses two LR44 batteries (included).

SCREW, BASE, WEAVER STYLE SCOPE C95263 SCREW,BASE, WEAVER STYLE SCOPE


SCREW, BASE, WEAVER STYLE SCOPE C95263 SCREW,BASE, WEAVER STYLE SCOPE


$7.64


SCREW, BASE, WEAVER STYLE SCOPE

UNI-MAX RAIL MOUNT LASER SIGHT LMS-UNI UNI-MAX RAIL MOUNT LASER


UNI-MAX RAIL MOUNT LASER SIGHT LMS-UNI UNI-MAX RAIL MOUNT LASER


$192.15


Compact, lightweight laser sight projects a bright, highly visible beam on the target for precise shot placement. Mounts in seconds on any pistol, rifle, or shotgun with 1¾” or more of Picatinny or Weaver-style rail space. Ambidextrous switch is comfortably positioned for quick engagement when pistol shooter’s index finger rests along the slide in the Universal Cover Mode. Beam may be set to constant output or rapidly pulsating mode for even greater visibility. Low-profile housing allows many guns fitted with the Uni-Max to be carried in standard holsters. Integral Picatinny rail on underside of housing allows mounting of tactical weapon light. Windage and elevation adjust easily with the in SPECS: Fiber reinforced nylon, black. 2¼” (5.7cm) long, 1” (2.5cm) wide, ¾” (1.9cm) high. Beam Diameter – 5/16” (1.6cm) at 7 yards, ¾” (1.9cm) at 25 yards. Uni-Max Red – 635 nm wavelength laser. .9 oz. (26g) weight. Includes (2) 357 batteries and (2) Allen wrenches. Uni-Green – 532

UNI-MAX RAIL MOUNT LASER SIGHT LMS-UNI-G UNI-MAX GREEN LASER


UNI-MAX RAIL MOUNT LASER SIGHT LMS-UNI-G UNI-MAX GREEN LASER


$407.95


Compact, lightweight laser sight projects a bright, highly visible beam on the target for precise shot placement. Mounts in seconds on any pistol, rifle, or shotgun with 1¾” or more of Picatinny or Weaver-style rail space. Ambidextrous switch is comfortably positioned for quick engagement when pistol shooter’s index finger rests along the slide in the Universal Cover Mode. Beam may be set to constant output or rapidly pulsating mode for even greater visibility. Low-profile housing allows many guns fitted with the Uni-Max to be carried in standard holsters. Integral Picatinny rail on underside of housing allows mounting of tactical weapon light. Windage and elevation adjust easily with the in SPECS: Fiber reinforced nylon, black. 2¼” (5.7cm) long, 1” (2.5cm) wide, ¾” (1.9cm) high. Beam Diameter – 5/16” (1.6cm) at 7 yards, ¾” (1.9cm) at 25 yards. Uni-Max Red – 635 nm wavelength laser. .9 oz. (26g) weight. Includes (2) 357 batteries and (2) Allen wrenches. Uni-Green – 532

AR-15/M16 LASER GRIPS LG-525 AR15/M16 A1 & A2 UPPER RECEIVER


AR-15/M16 LASER GRIPS LG-525 AR15/M16 A1 & A2 UPPER RECEIVER


$429


Integral, grip-mounted laser sighting system gives you an immediate, decisive advantage in almost any light conditions—low light, darkness, even broad daylight. A squeeze of your finger on the instinctively positioned pressure pad activates the laser for an added tactical edge by instantly projecting a bright red aiming dot on the target. Makes a great training tool by providing instant feedback to advanced shooting students learning instinctive aiming, and helps beginners learn how to achieve proper sight alignment, steady trigger pull, and consistent follow through. Ultra-bright laser is the brightest allowed by current federal law; dot diameter is approximately ½” at 50 feet. The ergonomi SPECS: 633nm Class IIIa red laser, 5 mW peak output. Includes batteries, Allen wrenches, mounting hardware, and instructions. Vertical Foregrip – Aluminum frame, anodized, and molded rubber, black. Fits Picatinny and Weaver-style rails. Pistol Grip/Upper Receiver – Polymer frame, mo

AR-15/M16 LASER GRIPS VF-302 VERTICAL GRIP W/THUMBSCREW MOUN


AR-15/M16 LASER GRIPS VF-302 VERTICAL GRIP W/THUMBSCREW MOUN


$429


Integral, grip-mounted laser sighting system gives you an immediate, decisive advantage in almost any light conditions—low light, darkness, even broad daylight. A squeeze of your finger on the instinctively positioned pressure pad activates the laser for an added tactical edge by instantly projecting a bright red aiming dot on the target. Makes a great training tool by providing instant feedback to advanced shooting students learning instinctive aiming, and helps beginners learn how to achieve proper sight alignment, steady trigger pull, and consistent follow through. Ultra-bright laser is the brightest allowed by current federal law; dot diameter is approximately ½” at 50 feet. The ergonomi SPECS: 633nm Class IIIa red laser, 5 mW peak output. Includes batteries, Allen wrenches, mounting hardware, and instructions. Vertical Foregrip – Aluminum frame, anodized, and molded rubber, black. Fits Picatinny and Weaver-style rails. Pistol Grip/Upper Receiver – Polymer frame, mo

RedHead  Ascent  Red Dot Laser Sight


RedHead Ascent Red Dot Laser Sight


$39.99


Brilliant 650mm red, straightline beam Projects a 10mm red dot at 10 meters Instant push-button activation Lightweight aluminum housing Shock- and water-resistant The RedHead? Ascent? Laser Sight shoots a brilliant 650nm red straightline beam, producing a highly visible 10mm red dot at 10 meters. Instant push-button activation with only fingertip pressure needed. Lightweight aluminum housing; shock- and water-resistant construction. Includes 3 LR44 batteries plus Weaver?-style and rimfire rings.

WEAVER BACKUP BASE 22-2069A-500-8 WEAVER LOW BACK UP BASE


WEAVER BACKUP BASE 22-2069A-500-8 WEAVER LOW BACK UP BASE


$65


Ghost-ring aperture is a fast, alternative, open sight that will save your hunt if your scope fails. Perfect for use on in-line muzzleloaders when hunting no-scope areas. Attaches in just seconds, without gunsmithing, to any Warne or Weaver-style base. Ruger sight fits Ruger and Talley bases, requires drilling rear base. Fully adjustable for windage and elevation. Includes front Test Post. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Weaver: .300″ (7.6mm), High Weaver: .352″ (8.9mm), Warne: .293″ (7.4mm), Ruger: .300″ (7.6mm). Heights measured from top of base to top of sight body.

WEAVER BACKUP BASE 22-2069B-000-8 HIGH WEAVER BACKUP BASE


WEAVER BACKUP BASE 22-2069B-000-8 HIGH WEAVER BACKUP BASE


$65


Ghost-ring aperture is a fast, alternative, open sight that will save your hunt if your scope fails. Perfect for use on in-line muzzleloaders when hunting no-scope areas. Attaches in just seconds, without gunsmithing, to any Warne or Weaver-style base. Ruger sight fits Ruger and Talley bases, requires drilling rear base. Fully adjustable for windage and elevation. Includes front Test Post. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Weaver: .300″ (7.6mm), High Weaver: .352″ (8.9mm), Warne: .293″ (7.4mm), Ruger: .300″ (7.6mm). Heights measured from top of base to top of sight body.

3/8 DOVETAIL TO WEAVER ADAPTER 17025 3/8 DOVETAIL TO WEAVER ADAPTER


3/8 DOVETAIL TO WEAVER ADAPTER 17025 3/8 DOVETAIL TO WEAVER ADAPTER


$32.99


Lets you choose from a wide selection of Weaver-style rings for receivers with nominal 3/8″ dovetail. Secure, single-slot, two-piece design allows perfect ring spacing every time and easy access to chamber. Made of aluminum to keep weight increase to a minimum. SPECS: Aluminum, black matte finish. Each base measures 1½” (3.81cm) long.

PARTS KIT 40019 WEAVER PARTS KIT


PARTS KIT 40019 WEAVER PARTS KIT


$58.49


Handy collection of replacement parts and screws for all Weaver Scopes and Mounts. Includes top straps, saddles, thumb screws, mount clamps and various screws. SPECS: 320 pieces in 12 compartment bench box.

WEAVER ADAPTER 410990 M77 RUGER WEAVER ADAPTER


WEAVER ADAPTER 410990 M77 RUGER WEAVER ADAPTER


$40


Improve your scope mounting options. Lets you adjust position for comfortable eye relief, enjoy a wider selection of available rings or easily mount short electronic scopes. Securely clamps to rifles and handguns machined for Ruger, factory rings. SPECS: Steel, polished blue finish. Length – 2″ (5cm) and 1-3/8″ (3.5cm). M77 fits M77 rifles, Super Redhawk. 77/22 fits Redhawk, Blackhawk Hunter, 77/22, 77ML, 77/44, 96/44, 10/22 Magnum, Mini-14, No. 1.

WEAVER ADAPTER 410991 77/22 RUGER WEAVER ADAPTER


WEAVER ADAPTER 410991 77/22 RUGER WEAVER ADAPTER


$40


Improve your scope mounting options. Lets you adjust position for comfortable eye relief, enjoy a wider selection of available rings or easily mount short electronic scopes. Securely clamps to rifles and handguns machined for Ruger, factory rings. SPECS: Steel, polished blue finish. Length – 2″ (5cm) and 1-3/8″ (3.5cm). M77 fits M77 rifles, Super Redhawk. 77/22 fits Redhawk, Blackhawk Hunter, 77/22, 77ML, 77/44, 96/44, 10/22 Magnum, Mini-14, No. 1.

WEAVER BACKUP BASE 22-2109A-000-8 RUGER BACKUP SIGHT


WEAVER BACKUP BASE 22-2109A-000-8 RUGER BACKUP SIGHT


$65


Ghost-ring aperture is a fast, alternative, open sight that will save your hunt if your scope fails. Perfect for use on in-line muzzleloaders when hunting no-scope areas. Attaches in just seconds, without gunsmithing, to any Warne or Weaver-style base. Ruger sight fits Ruger and Talley bases, requires drilling rear base. Fully adjustable for windage and elevation. Includes front Test Post. SPECS: Steel, blue, matte finish. .191″ (4.8mm) diameter aperture. Weaver: .300″ (7.6mm), High Weaver: .352″ (8.9mm), Warne: .293″ (7.4mm), Ruger: .300″ (7.6mm). Heights measured from top of base to top of sight body.

RIFLE BASES 15010 1-PC WEAVER STYLE BASE FOR 98 FN


RIFLE BASES 15010 1-PC WEAVER STYLE BASE FOR 98 FN


$7.07


Full length, multi-slotted Weaver-style, bases for easy mounting of scopes and electronic sights. Accepts Weaver-style rings. Mauser 98’s will require drilling and tapping. SPECS: Aluminum, Blue anodized. Lengths vary.

BSA  Stealth Illuminated Red Dot Sight with Laser and Light


BSA Stealth Illuminated Red Dot Sight with Laser and Light


$149.99


Multi-purpose red dot gun sight designed for the most demanding situations Flashlight and laser combo included Xtreme Climate Protection – fogproof, waterproof, and shockproof Fully multicoated optics – Brightview optical treatments Twist-Cap technology – controls image brightness by turning objective lens rim Fits 5/8” Weaver rail Specially built to perform under severe conditions, the BSA Stealth Illuminated Red Dot Sight with Laser and Light gives you a gun sight distinctly designed for multi-purpose use in the most demanding of situations. Part of BSA’s Stealth Series of scopes, this illuminated red dot sight is packed with the latest developments in optical engineering. BSA’s Xtreme Climate Protection delivers fogproof, waterproof, and shockproof performance you can count on while the sight’s fully multicoated optics treated with Brightview optical treatments provide superior sharpness and resolution in all light conditions. Multi-purpose Twist-Cap technology controls the image brightness a simple turn of the objective lens rim while the new Push/Pull quick set Turret System allows quick and easy 1/2 MOA adjustments. Designed for 5/8” Weaver rail. Includes an attached flashlight and laser combo. Weight: 5 oz. Color: Black Matte. One year limited manufacturer’s warranty. FOV = Point of View @ 100 yards Manufacturer model #: STSRD30LL.

ADAPTER BASES 48203 WEAVER TO-1 ADAPTER BASE


ADAPTER BASES 48203 WEAVER TO-1 ADAPTER BASE


$15.95


One-piece. Allow use of Weaver rings on these guns. SPECS: Aluminum, Blue. TO-10 Positions scope further forward and ¼” (6.3mm) higher. Uses 7/8″/1″ Tip-Off Mounts or 7/8″/1″ Top Mount Rings. TO-1 requires drilling and tapping of receiver. Note: 7/8″= 22.2mm, 1″= 2.5cm.

ADAPTER BASES 48201 WEAVER TO-9 ADAPTER BASE


ADAPTER BASES 48201 WEAVER TO-9 ADAPTER BASE


$5.95


One-piece. Allow use of Weaver rings on these guns. SPECS: Aluminum, Blue. TO-10 Positions scope further forward and ¼” (6.3mm) higher. Uses 7/8″/1″ Tip-Off Mounts or 7/8″/1″ Top Mount Rings. TO-1 requires drilling and tapping of receiver. Note: 7/8″= 22.2mm, 1″= 2.5cm.

ADAPTER BASES 48202 WEAVER TO-10 ADAPTER BASE


ADAPTER BASES 48202 WEAVER TO-10 ADAPTER BASE


$7.49


One-piece. Allow use of Weaver rings on these guns. SPECS: Aluminum, Blue. TO-10 Positions scope further forward and ¼” (6.3mm) higher. Uses 7/8″/1″ Tip-Off Mounts or 7/8″/1″ Top Mount Rings. TO-1 requires drilling and tapping of receiver. Note: 7/8″= 22.2mm, 1″= 2.5cm.

PEEP SIGHT N-106 NECG WEAVER PEEP SIGHT


PEEP SIGHT N-106 NECG WEAVER PEEP SIGHT


$85


Solid-steel sight is fully adjustable for windage and elevation; provides a primary sight when hunting dangerous game and a scope is not practical, or an emergency backup. Furnished with .093″ and .125″ diameter apertures; allows you to shoot very accurately, even under poor light conditions. Fits Weaver-style or Picatinny base, may be easily removed and returned to zero every time. Includes two elevation slides. SPECS: Steel, blue finish. 1-1/8″ (2.9cm) long, 1-½” (3.8cm) wide, 1″ (2.5cm) high. Aperture – 7/32-40 thread, accepts Williams and Merit sight discs.

TOP MOUNT BASES WEAVER 402 BASE #48108


TOP MOUNT BASES WEAVER 402 BASE #48108


$4.49


Lightweight aluminum bases fit a wide range of modern and older rifles, plus shotguns and long range handguns. Sold each; order front and rear base. Click here to find the right base for your rifle model. One piece bases and base pair sets available for some models. Base pair sets are marked with * or **. SPECS: Aluminum, polished blue finish except Matte (M), Silver (S). Extension bases: Front (F), Rear (R). Fits Top Mount and See-Thru Mount Rings.

TOP MOUNT BASES WEAVER 403 BASE #48107


TOP MOUNT BASES WEAVER 403 BASE #48107


$7.49


Lightweight aluminum bases fit a wide range of modern and older rifles, plus shotguns and long range handguns. Sold each; order front and rear base. Click here to find the right base for your rifle model. One piece bases and base pair sets available for some models. Base pair sets are marked with * or **. SPECS: Aluminum, polished blue finish except Matte (M), Silver (S). Extension bases: Front (F), Rear (R). Fits Top Mount and See-Thru Mount Rings.

TOP MOUNT BASES WEAVER 404 BASE #48106


TOP MOUNT BASES WEAVER 404 BASE #48106


$9.95


Lightweight aluminum bases fit a wide range of modern and older rifles, plus shotguns and long range handguns. Sold each; order front and rear base. Click here to find the right base for your rifle model. One piece bases and base pair sets available for some models. Base pair sets are marked with * or **. SPECS: Aluminum, polished blue finish except Matte (M), Silver (S). Extension bases: Front (F), Rear (R). Fits Top Mount and See-Thru Mount Rings.

TOP MOUNT BASES WEAVER 405 BASE #48105


TOP MOUNT BASES WEAVER 405 BASE #48105


$9.95


Lightweight aluminum bases fit a wide range of modern and older rifles, plus shotguns and long range handguns. Sold each; order front and rear base. Click here to find the right base for your rifle model. One piece bases and base pair sets available for some models. Base pair sets are marked with * or **. SPECS: Aluminum, polished blue finish except Matte (M), Silver (S). Extension bases: Front (F), Rear (R). Fits Top Mount and See-Thru Mount Rings.

LASER BORESIGHTER 7.62X39 LASER BORESIGHT


LASER BORESIGHTER 7.62X39 LASER BORESIGHT


$39.99


Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m

LASER BORESIGHTER 25-06,270,30-06 LASER BORESIGHT


LASER BORESIGHTER 25-06,270,30-06 LASER BORESIGHT


$39.99


Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m

LASER BORESIGHTER 264,7MM,338 LASER BORESIGHT


LASER BORESIGHTER 264,7MM,338 LASER BORESIGHT


$39.99


Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m

LASER BORESIGHTER 243,308,7MM-08,260,358 LASER BORESIGHT


LASER BORESIGHTER 243,308,7MM-08,260,358 LASER BORESIGHT


$39.99


Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8m

LASER BORESIGHTER SL-100 LASER BORESIGHTER


LASER BORESIGHTER SL-100 LASER BORESIGHTER


$116.6


Saves range time and ammo; highly accurate laser system lets you zero your scope to point-of-aim at 100 yards, before you go to the range. Quick and easy to use, just place the special laser target 25 feet away and aim the laser at it, then adjust the scope till the crosshairs align with the target. Works equally well with red dot scopes and iron sights. Laser is mounted to a cone shaped, aluminum spud. An O-ring and a powerful magnet hold the spud centered in the bore. No special adapters to buy and no metal contacts the rifling. A system of adapters and O-rings lets one unit fit all firearms from .22 to .50 caliber, plus 12 and 20 gauge shotguns. Also includes the SRL-100 adapter that slip SPECS: Aluminum. Includes (2) adapters, (12) O-rings, (2) cardboard target cards, SRL-100 adapter, instructions, and plastic storage case. SL‑100 – 6-1⁄8” (15.6cm) OAL without adapter, 4-1⁄8” (10.5cm) long spud. Uses (2) #357/ LR-44 batteries, included. SL-150 – 6

AR-15/M16 CARRY HANDLE SCOPE BASE MID LINE AR15 BASE, WEAVER STYLE MOUNT


AR-15/M16 CARRY HANDLE SCOPE BASE MID LINE AR15 BASE, WEAVER STYLE MOUNT


$24.99


Mounts on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Weaver model features eight cross-slots and accepts Weaver-style rings. Picatinny version has a true, Mil-SPec 1913 Picatinny cut along its entire length and accepts Weaver or Picatinny rings. SPECS: Aluminum, black, matte.7½” (19cm) long. 3½ oz. (99 g).

PICATINNY SIDE-MOUNT ADAPTER PICATINNY SIDE-MOUNT ADAPTER


PICATINNY SIDE-MOUNT ADAPTER PICATINNY SIDE-MOUNT ADAPTER


$25.35


Aluminum, space-saving, side-mount adapter fits on Picatinny rails to let you mount flashlights, laser-light systems, red-dot scopes, and more. Attachment leg doesn’t interfere with the mounting of your scope; no need to sacrifice optics for accessories. Will not fit Weaver bases. SPECS: Machined aluminum, powder-coated, black, matte finish. Approximately 1″ (2.54cm) long, 27/32″ (21.4mm) wide. Will not fit Weaver bases.

WEAVER 8-40 SIGHT SCREW COUNTERBORE WEAVER 8 X 40 COUNTERBORE


WEAVER 8-40 SIGHT SCREW COUNTERBORE WEAVER 8 X 40 COUNTERBORE


$21.57


Overall 2½” (6.3mm); Body Dia. .250″ (6.3mm); Pilot Dia. .165″ (4.2mm); Pilot Length 1⁄8″ (3.2mm); 45° Shoulder. Use Drill No. 19 for Pilot Hole.

WEAVER 6-48 SIGHT SCREW COUNTERBORE WEAVER 6 X 48 COUNTERBORE


WEAVER 6-48 SIGHT SCREW COUNTERBORE WEAVER 6 X 48 COUNTERBORE


$23.95


Overall 2½”; Body Dia. .218″; Pilot Dia. .137″; Pilot Length 1⁄8″; 45° Shoulder. Use Drill No. 28 for Pilot Hole.

ANGLE-LOC? SCOPE RINGS AL00017 30MM MED SMOOTH WEAVER STYLE


ANGLE-LOC? SCOPE RINGS AL00017 30MM MED SMOOTH WEAVER STYLE


$52.99


Weaver-style rings with individual, right- and left-hand locking clamps provide external windage changes to conserve your scope’s internal windage adjustment. Heat-treated, nickel steel gives strength and durability. Internal surfaces are splined to help grip the scope body and prevent movement or loss of zero caused by recoil. Fit all Weaver-style bases. Extension (ext.) rings add .500″ forward or rearward for easier mounting of long target or mini-scopes. BRNO CZ rings fit the unique dovetail found on ZKK 600, 601, 602 and 550 rifles. Tikka fits all models with integral dovetail. CZ 527 Rings fit CZ527 receivers only. SPECS: Steel. Blue, polished (Smooth), blue, matte (Matte) or silver, matte, nickel-plated finish (Nickel) in 1″ (2.5mm) or 30mm diameter to fit Weaver-style bases. Ring heights measured from top of base to inside bottom of ring. Heights for all except CZ527: 1″ Low, .

REDDOT? SIGHT MOUNTS MS19 WEAVER/PICATINNY MT TRIJICON RD


REDDOT? SIGHT MOUNTS MS19 WEAVER/PICATINNY MT TRIJICON RD


$68.95


Precision machined from strong yet lightweight aluminum and specifically designed to provide a secure, solid platform for the Trijicon RedDot reflex sight. MS19 fits standard Picatinny and Weaver-style accessory rails. Large, deeply grooved thumbscrew serves as a recoil lug and pulls the steel locking bar tightly against the rail for a zero-movement installation. MS12 allows secure piggyback mounting on Trijicon ACOG TA01NSN and TA31DOC scopes. MS13 also fits TA01NSN and TA31DOC and adds protective wings to guard the Reddot from impact during rough tactical operations. SPECS: Aluminum, hardcoat anodized, matte black. MS19 fits Picatinny and Weaver-style rails. MS12/MS13 fit ACOG TA01NSN and TA31DOC scopes.

WEAVER-STYLE ZEE RINGS 420077 30MM HIGH SAFARI ZEE RINGS


WEAVER-STYLE ZEE RINGS 420077 30MM HIGH SAFARI ZEE RINGS


$60


Precision machined STEEL, streamlined rings to fit Weaver style bases. Gives that “custom” look. Elegant, rounded contours. SPECS: Steel; polished blued (Pol. Blue), matte blued (Safari) or satin, nickel-plated (Silver). Height shown is from top of base to inside bottom of ring. 1″ (2.5cm) diameter. Low – 135″ (3.4mm), Med. – .245″ (6.2mm), High – 450″ (11.4mm), 30mm (1.1″) diameter. High

WEAVER-STYLE ZEE RINGS 420079 BURRIS ZEE RINGS, LOW SILVER


WEAVER-STYLE ZEE RINGS 420079 BURRIS ZEE RINGS, LOW SILVER


$44


Precision machined STEEL, streamlined rings to fit Weaver style bases. Gives that “custom” look. Elegant, rounded contours. SPECS: Steel; polished blued (Pol. Blue), matte blued (Safari) or satin, nickel-plated (Silver). Height shown is from top of base to inside bottom of ring. 1″ (2.5cm) diameter. Low – 135″ (3.4mm), Med. – .245″ (6.2mm), High – 450″ (11.4mm), 30mm (1.1″) diameter. High

WEAVER-STYLE ZEE RINGS 420083 BURRIS ZEE RINGS, LOW SAFARI


WEAVER-STYLE ZEE RINGS 420083 BURRIS ZEE RINGS, LOW SAFARI


$35


Precision machined STEEL, streamlined rings to fit Weaver style bases. Gives that “custom” look. Elegant, rounded contours. SPECS: Steel; polished blued (Pol. Blue), matte blued (Safari) or satin, nickel-plated (Silver). Height shown is from top of base to inside bottom of ring. 1″ (2.5cm) diameter. Low – 135″ (3.4mm), Med. – .245″ (6.2mm), High – 450″ (11.4mm), 30mm (1.1″) diameter. High

Weaver Detachable Top-Mount Rings


Weaver Detachable Top-Mount Rings


$24.99


To remove a Weaver detachable top-mount ring, you just loosen 2 thumb nuts, and it’s off. Remounting is just as easy. Tighten each thumb nut until both are snug, and you’re back to zero. Works with Weaver bases sold separately. Machined-steel construction.

ALUMINUM ALLOY VERTICAL SPLIT RINGS AL00019 1 MED MATTE WEAVER STYLE RING


ALUMINUM ALLOY VERTICAL SPLIT RINGS AL00019 1 MED MATTE WEAVER STYLE RING


$17.99


Vertically split scope rings made from a special, heat-treated aluminum alloy dramatically cut weight without compromising strength. Tempered, Allen-head cross bolts and one clamp make it easy to remove and replace these rings. Rimfire (RF) fits nominal 3/8″ .22 rimfire receiver dovetails. Weaver fit Weaver-style bases. SPECS: Aluminum matte finish. 1″ (2.5cm) or 30mm dia. Height from top of base to inside bottom of ring. Rimfire (RF): medium .220″ (5.6mm), Weaver: medium .285″ (7.2mm),

ALUMINUM ALLOY VERTICAL SPLIT RINGS AL00020 30MM MED MATTE WEAVER STYLE RG


ALUMINUM ALLOY VERTICAL SPLIT RINGS AL00020 30MM MED MATTE WEAVER STYLE RG


$17.99


Vertically split scope rings made from a special, heat-treated aluminum alloy dramatically cut weight without compromising strength. Tempered, Allen-head cross bolts and one clamp make it easy to remove and replace these rings. Rimfire (RF) fits nominal 3/8″ .22 rimfire receiver dovetails. Weaver fit Weaver-style bases. SPECS: Aluminum matte finish. 1″ (2.5cm) or 30mm dia. Height from top of base to inside bottom of ring. Rimfire (RF): medium .220″ (5.6mm), Weaver: medium .285″ (7.2mm),

New BlackHawk Cheek Pad 1005-01-517-7052 Black 90CP00BK High Quality Modern Design Beautiful Popular


New BlackHawk Cheek Pad 1005-01-517-7052 Black 90CP00BK High Quality Modern Design Beautiful Popular


$21.49


BlackHawk Cheek Pad 1005-01-517-7052 Black 90CP00BK….

New Night Owl Optics Igen Night Vision Scope Variable Display Brightness Color Output Choices


New Night Owl Optics Igen Night Vision Scope Variable Display Brightness Color Output Choices


$1,198.00


Enhanced infrared sensitivity: double that of intensifier tube technology. Clarity across the screen, edge to edge. Variable display brightness. Programmable time out features. Color output choices….

New Night Owl Optics Nexgen 2x Night Vision Scope 500x Ambient Light Amplification 2x Magnification


New Night Owl Optics Nexgen 2x Night Vision Scope 500x Ambient Light Amplification 2x Magnification


$193.30


2x Magnification. Field of view 70ft. at 200ft.. IR Field illumination is 32ft. diameter at 150ft. (12 degree projection angle). CR-123 3 volt lithium battery….

New NCStar Red Laser Sight/Flashlight Combo Designed for Use With Most Weaver Picatinny Rail Systems


New NCStar Red Laser Sight/Flashlight Combo Designed for Use With Most Weaver Picatinny Rail Systems


$75.00


Red Laser Sight/Flashlight Combo. Powered by 2 AG13 button cell batteries included. Dimension: 2.3L x 1.1W x 0.9H…

Jelly Head 12 ga Benel SBEII .660


Jelly Head 12 ga Benel SBEII .660


$39.89


Jelly Head 12 ga Benelle Super Black Eagle II .660 – Manufacture ID: 6912Jelly Head Choke Tubes are crafted with the most demanding turkey hunters in mind. This extra-long extended choke is CNC milled from chrome alloy steel. They are designed to increase the range and pattern density of HEVI-SHOT copper plated lead or regular lead. The fluted ports allow gases to vent quickly behind the load of s…



Laser Weaver
pistolgrip vs. other stocks?

Howdy. I’ve used shotguns for sport hunting for many years. Had shoulder surgery a little over a year ago. I converted my mossberg 500 to a shorter barrel and pistol grip for home safety. Took it to the range the other day, still in a lot of pain. I deffinately can not use the ‘regular’ stock. Pistol grip not working out either. should I ditch the shotgun and switch to a different line of defence? Or are there other types of stocks or modifications that I should consider? also, someone mentioned the less additions the better, what are you comments on magazine mounted flashlights and weaver mounted lasers?
Thanks
W. R.

get a semi auto, that will kick a lot less and get the stock shortened and gut a huge girly Butt Pad….

its lame but shooting is worth it

also try lefty? with shotguns its easier than one would think

i tried a round of trap for fun and hit 6!!!

just practice the lefty on the .22 range first and get the hang



Damon Weaver Interviews Cast from Everybody Hates Chris at the 2010 NAACP Image Awards


Rifle Gun Target

Friday, September 3rd, 2010

RIFLE REST TARGET SHOOTING RIFLE REST


RIFLE REST TARGET SHOOTING RIFLE REST


$279.99


U.S. made, cast iron bases and steel tubing tightly and securely maintain hold of your gun; makes shot-to-shot repetition fast, easy, and accurate. Adjust either base to the position your shot requires; the front base fine tunes for height and rotates a full 360°. The rear base adjusts to the height, tilt, and level you want. Cast iron construction improves harmonics and reduces vibration. The front rest cradle is coated in rubber and wrapped in leather to protect your rifle-stock. Hollow steel tubing inhibits vibration and is zinc-coated to prevent rust. Open-rail design has room for long magazines or lever action guns. The length adjusts to accommodate almost any rifle; even the big 50’s! SPECS: Cast iron and machined steel. 27″ (68.58cm) long when fully extended, 11″ (28cm) wide, 8″ (20.3cm) tall. 11 lbs. (4.9 kg) wt. Front rest cradle is 5″ (12.7cm) long and 4.5″ (11.4cm) wide. Powder coat paint finish, rubber coated feet.

RedHead  Rifle Target


RedHead Rifle Target


$4.99


This 100-yard precision rifle target is perfect for maximizing your aim. 25 pack.

SIGHT, FRONT, RIFLE/SLUG GUN F201994 FRONT SIGHT


SIGHT, FRONT, RIFLE/SLUG GUN F201994 FRONT SIGHT


$9.79


SIGHT, FRONT, RIFLE/SLUG GUN

SELF-ADHESIVE TARGET SPOTS BIRCHWOOD CASEY 6 TARGET SPOTS, 12 PK


SELF-ADHESIVE TARGET SPOTS BIRCHWOOD CASEY 6 TARGET SPOTS, 12 PK


$6.99


Bright stick-on target spots are easy to use and convenient for creating instant bullseyes for target practice, sighting in, and other shooting activities that require a target that’s easy to see, even at long range. High-contrast, radiant orange-red color ensures a sharp sight picture for smaller groups. Vertical and horizontal crosshair lines aid in aligning scope reticles. Available in 1″, 3″, and 6″ diameters for different distances and applications, including handgun, rifle, slug gun, and archery. SPECS: Orange-red adhesive-backed paper, with black markings. Comes on waxed, peel-off backing sheets.

SELF-ADHESIVE TARGET SPOTS BIRCHWOOD CASEY 1 TARGET SPOTS, 12 PK


SELF-ADHESIVE TARGET SPOTS BIRCHWOOD CASEY 1 TARGET SPOTS, 12 PK


$5.99


Bright stick-on target spots are easy to use and convenient for creating instant bullseyes for target practice, sighting in, and other shooting activities that require a target that’s easy to see, even at long range. High-contrast, radiant orange-red color ensures a sharp sight picture for smaller groups. Vertical and horizontal crosshair lines aid in aligning scope reticles. Available in 1″, 3″, and 6″ diameters for different distances and applications, including handgun, rifle, slug gun, and archery. SPECS: Orange-red adhesive-backed paper, with black markings. Comes on waxed, peel-off backing sheets.

SELF-ADHESIVE TARGET SPOTS BRCHWD CSY 3 TRGT SPTS/12SHTS-24TRGTS


SELF-ADHESIVE TARGET SPOTS BRCHWD CSY 3 TRGT SPTS/12SHTS-24TRGTS


$4.99


Bright stick-on target spots are easy to use and convenient for creating instant bullseyes for target practice, sighting in, and other shooting activities that require a target that’s easy to see, even at long range. High-contrast, radiant orange-red color ensures a sharp sight picture for smaller groups. Vertical and horizontal crosshair lines aid in aligning scope reticles. Available in 1″, 3″, and 6″ diameters for different distances and applications, including handgun, rifle, slug gun, and archery. SPECS: Orange-red adhesive-backed paper, with black markings. Comes on waxed, peel-off backing sheets.

Ruger 10/22 Long Target Rifle


Ruger 10/22 Long Target Rifle


$429.99


The Ruger 10/22 rifle offers a superior combination of light weight, short overall length, and mechanical dependability that ensures years of reliable service, even with heavy use. The receiver is drilled and tapped for a tip-off scope mount adapter, included with each rifle.

BUILDING A TARGET RIFLE VIDEO BUILDING A TARGET RIFLE 2-SET, DVD


BUILDING A TARGET RIFLE VIDEO BUILDING A TARGET RIFLE 2-SET, DVD


$69.95


Steve Acker. DVD format. You’re virtually looking over Acker’s shoulder as he performs each step and explains the how, what and why. Excellent instructional source that describes the process step-by-step; great for the beginner or seasoned professional. 4 hours, 10 minutes. Demonstrates advanced machining techniques used to true-up receivers, bolts, and barrels for precision competition rifles. Includes an in-depth discussion on the various components, state-of-the-art tools, and products available that save time and money.

SERBIAN AND YUGOSLAV MAUSER RIFLE #024-SERBIAN AND YUGOSLAV MAUSER RIFLE


SERBIAN AND YUGOSLAV MAUSER RIFLE #024-SERBIAN AND YUGOSLAV MAUSER RIFLE


$19.99


Branko Bogdanovic. 278 pages. 5½” x 8½”. Softbound. Over 120 photographs. Well-known European gun writer Branko Bogdanovic is a member of the Advisory Board of the National Military Museum, Belgrade, Serbia, and a researcher for the Ministry of the Interior. This straightforward, well-written text covers the history of the “Yugoslav” Mauser rifles from 1880 to the present, including all sniper rifles, hunting rifles, target rifles and .22 sporting rifles. These are the rifles that made the Yugoslav partisans famous during World War II. Serial number ranges and markings are presented, along with accurate photographs and line drawings for quick and easy Mauser identification.

Remington  Gun Club  Target Loads


Remington Gun Club Target Loads


$5.29


A $6.99 value! Set the standard at all major skeet, trap and sporting clays events Shot-to-shot consistency Most reliable, consistent and reloadable shells you can shoot Loaded with Gun Club grade shot, Premier STS Primers and Power Piston 1-pc. wads Remington’s Gun Club Target Loads have taken shot-to-shot consistency to a new performance level, while providing handloaders with unequaled reloading ease and hull longevity. Available in most gauges, Remington Gun Club Target Loads are the most consistent, reliable and reloadable shells you can shoot. Remington Gun Club Target Loads are your best choice for economical shooting. Loaded with Gun Club Grade Shot, Premier STS Primers and Power Piston One-Piece Wads, Remington Gun Club Target Loads receive the same care in loading as Remington’s top-of-the-line shells. Many shooters are discovering they can get acceptable reloading life while stretching their shooting dollar. Made in USA.

TACTICAL RIFLE CASE 37 GUN CASE


TACTICAL RIFLE CASE 37 GUN CASE


$100.99


A shell of abrasion- and mildew-resistant, 1000 denier, Nytaneon nylon surrounds 3⁄8″ of padding on the top and bottom of the case for snug, no-slip protection of your rifle and its expensive optics. Padding on the bottom of the case covers the zipper tracks to protect your rifle from scratches. A double-stitched, nylon carry handle is attached to the case with multi-reinforced stitching; an adjustable, padded sling offers a tactical-carry option. All cases accept rifles with mounted optics and fully unzip to be used as a shooting mat. Standard Rifle case is available in 34″, 37″, and 41″ lengths and features four high-capacity magazine pouches (five on 41″ case) with positive-c SPECS: 1000 denier, Nytaneon nylon, black.

TACTICAL RIFLE CASE 34 GUN CASE


TACTICAL RIFLE CASE 34 GUN CASE


$97.99


A shell of abrasion- and mildew-resistant, 1000 denier, Nytaneon nylon surrounds 3⁄8″ of padding on the top and bottom of the case for snug, no-slip protection of your rifle and its expensive optics. Padding on the bottom of the case covers the zipper tracks to protect your rifle from scratches. A double-stitched, nylon carry handle is attached to the case with multi-reinforced stitching; an adjustable, padded sling offers a tactical-carry option. All cases accept rifles with mounted optics and fully unzip to be used as a shooting mat. Standard Rifle case is available in 34″, 37″, and 41″ lengths and features four high-capacity magazine pouches (five on 41″ case) with positive-c SPECS: 1000 denier, Nytaneon nylon, black.

RedHead Gun or Rifle Cleaning Pads


RedHead Gun or Rifle Cleaning Pads


$9.99


America’s #1 selling gun cleaning pad. Protects your table and firearms from scratches and spilled gun cleaning fluids; perfect for rifles, shotguns, muzzleloaders, and handguns. The clear bonded backing prevents ‘’soak-thru.” Keeps gun parts organized and in place; durable, stain-resistant, and long-lasting. Accessories shown are not included.

BRIGHTSIGHTS GUN SIGHT COATING #50010 5-COLOR GUN SIGHT COLOR KIT


BRIGHTSIGHTS GUN SIGHT COATING #50010 5-COLOR GUN SIGHT COLOR KIT


$14.95


Tough, flexible coating provides a highly visible contrast between sights and target. Provides more accurate shot placement, improves sight picture and focal concentration on front sight. Durable, won’t harm firearms finish. Easy-to-apply Five Color Kit for use on rifle, pistol and handgun sights. Three color, Ghost Glow Kit contains a light activated, luminescent coating for use in reduced visibility situations. SPECS: 3cc glass bottles. Five Color Kit – Red, White, Green, Orange and Yellow, plus cleaner. Ghost Glow Kit – Green, Yellow and Orange.

RedHead Aluminum Rifle Gun Cases


RedHead Aluminum Rifle Gun Cases


$89.94


Tough aluminum outer skin covers a durable, hexagonal aluminum frame fortified with heavy duty corner protectors. Inner padding: 1″ flat foam plus cutaway interior foam. Full-length hidden hinge for superior security plus heavy-duty keyed lockable latches. Single rifle features a padded shoulder strap; the 2-rifle rolls on wheels. Rifle: 53″ x 12″ x 5″. 2-Rifle: 53″ x 15″ x 5″.

CANVAS GUN CASE GC43P-48 VARMIT SCOPED RIFLE CASE-GRN


CANVAS GUN CASE GC43P-48 VARMIT SCOPED RIFLE CASE-GRN


$108


Heavyweight, 22 oz. canvas and 40 oz. cotton batting with flannel lining guard your gun against dings and scratches. Stout construction features long-lasting, all-brass zipper and wraparound nylon web handle to stand up to hard use. Solid brass rivets at major stress points provide extra durability. One inch wide hook-and-loop closure runs full length of pockets to securely hold your extra gear. Scoped Rifle Case with full length, two-way zipper accepts heavy barrel varmint rifles with large objective scopes. Large 13″ x 7½” x 2″ accessory pocket holds bi-pod or other shooting accessories. Available in O.D. Green. Takedown Shotgun Case holds any take-down shotgun. Has high g SPECS: Canvas. Brass hardware. Scoped Rifle Case – O.D. Green. 50½” (128cm) long, 13” (33cm) wide at pocket, 7½”(19cm) wide at muzzle. Accepts rifles up to 48” (122cm) OAL. Takedown Shotgun Case – Khaki. 37½” (95cm) long, 11” (28cm) wide at butt, 8¼” (21cm) wide at muzzle. Accepts b

WATERTIGHT PROTECTOR GUN CASES #1720 RIFLE CASE (BLACK)


WATERTIGHT PROTECTOR GUN CASES #1720 RIFLE CASE (BLACK)


$297.95


Super-tough, lightweight hardshell cases protect your valuable guns from just about any punishment you can dish up, from everyday bangs and dings to the rigors of tactical operations. These cases even float, so a gun overboard isn’t lost for good. The outer shell of high impact, polypropylene structural resin has an open-cell core and solid walls to safeguard the guns inside from dust, water, and many chemicals. High-density polyurethane foam inside protects them from vibration and shock. A tongue-and-groove lid with a neoprene sponge O-ring provides an airtight, waterproof seal, while the unique, one-way automatic purge valve equalizes pressure inside for ease in closing the lid. Easy-openi SPECS: Shell – High-impact polypropylene, black. Interior – High-density foam, gray. Pistol Case – 19-1⁄8″ long, 15-7⁄8″ wide, 7-9⁄16″ high. Rifle Case – 44-3⁄8″ long, 16″ wide, 6-1⁄8″ high.

RedHead Rigid Vinyl Rifle Gun Cases


RedHead Rigid Vinyl Rifle Gun Cases


$69.99


Full-length piano hinge Rubberized non-slip handles Padded shoulder strap Full-length piano hinge with nylon support hinges, plus rubberized non-slip handles. Single rifle features a padded shoulder strap; the 2-rifle rolls on wheels. Color: Black. Rifle: 51″ x 10″ x 4.5″. 2-Rifle: 51″ x 13″ x 4.5″.

AR-5/10 5 METER OFFICAL RIFLE TARGET AR-5/10 TARGETS, PKG 100


AR-5/10 5 METER OFFICAL RIFLE TARGET AR-5/10 TARGETS, PKG 100


$16.33


14″ (35.5cm) x 12″ (30.4cm) overall; 1-3⁄16″ (3cm) diameter, black (4-X rings).

FRINGED GUN COVER FRINGED GUN COVER


FRINGED GUN COVER FRINGED GUN COVER


$69.99


Keep your buffalo rifle, coach gun, or traditional muzzleloader safe and secure in this genuine leather gun sleeve. Beefy, double-stitching prevents tearing under the roughest use. Angled design is tailored after Old West gun covers for a superior fit. Soft leather, sueded on both sides; prevents scratches and protects your firearm from bumps and dings. Folding flap with leather tie closure secures your gun inside the case and keeps trail dust and dampness out. Loop on barrel end allows you to hang the case for storage or to dry out after a long day on the trail. 5½” long, leather fringe is sewn into the bottom seam for an authentic western look. Leather Brownells logo patch on the si SPECS: Leather, russet brown. 66″ (168cm) long. Fits rifles and shotguns up to 60″ (152cm) long.

BRIGHTSIGHTS GUN SIGHT COATING #30012 GHOST GLOW KIT


BRIGHTSIGHTS GUN SIGHT COATING #30012 GHOST GLOW KIT


$24.95


Tough, flexible coating provides a highly visible contrast between sights and target. Provides more accurate shot placement, improves sight picture and focal concentration on front sight. Durable, won’t harm firearms finish. Easy-to-apply Five Color Kit for use on rifle, pistol and handgun sights. Three color, Ghost Glow Kit contains a light activated, luminescent coating for use in reduced visibility situations. SPECS: 3cc glass bottles. Five Color Kit – Red, White, Green, Orange and Yellow, plus cleaner. Ghost Glow Kit – Green, Yellow and Orange.

PETERSEN'S RIFLESHOOTER RIFLE SHOOTER (1 YR SUBSCRIPTION)


PETERSEN’S RIFLESHOOTER RIFLE SHOOTER (1 YR SUBSCRIPTION)


$11.97


Dedicated to the serious rifle enthusiast, RifleShooter covers rifle sports from hunting to target shooting and collecting. Whether you’re into fine custom rifles, great classics, new high-tech designs—or all three—every issue has something for you, including articles devoted to shooting technique, gunsmithing, ballistics, product reviews, and more. Published by Primedia. Savings – 50% off cover price.

RUGER~ 10/22~ TARGET/VARMINT STOCK 10/22 TARGET/VARMINT STOCK (BLACK)


RUGER~ 10/22~ TARGET/VARMINT STOCK 10/22 TARGET/VARMINT STOCK (BLACK)


$223.42


Full-size target-style stock comes fully finished and inletted for drop-in installation of a heavy barrel Ruger 10/22 action. Provides an exceptionally strong, stable platform for a precise-shooting target/varmint rifle. Rigid fiberglass/Kevlar composite construction won’t flex and put uneven pressure on barrel or action that can compromise accuracy. Withstands temperature extremes, moisture, and hard use; textured black finish ensures a non-slip grasp. Wide, extended pistol grip with deep thumb rest gives a natural, comfortable hand position. Wide forend is gently tapered to aid in quick, easy adjustments of position for elevation, with a flat underside for solid contact with sandbags or sh SPECS: Fiberglass/Kevlar composite with textured finish, black. Approximately 295⁄8″ (75.2cm) long. 13¾” l.o.p. 2.6 lb. (1.2kg) weight. Drop-in design may require minor fitting. Inletted for Ruger 10/22 with factory bull (.920” O.D.) barrel.

GUN SHOW CASE AS-49 GUN SHOW CASE


GUN SHOW CASE AS-49 GUN SHOW CASE


$8.25


Lightweight and easy to carry to the gun show; keeps youlegal and protects your new rifle or shotgun. Soft, velour exterior, foam-padded, lycra interior lining. SPECS: SR-54 – Fits rifles/shotguns, 9″ (22cm) wide, 54″ (137cm) long. AS-49 – Fits scoped AR-15’s and similar rifles, 12″ (30cm)wide, 49″ (124cm) long. Colors may vary.

GUN SHOW CASE SR-54 GUN SHOW CASE


GUN SHOW CASE SR-54 GUN SHOW CASE


$9.99


Lightweight and easy to carry to the gun show; keeps youlegal and protects your new rifle or shotgun. Soft, velour exterior, foam-padded, lycra interior lining. SPECS: SR-54 – Fits rifles/shotguns, 9″ (22cm) wide, 54″ (137cm) long. AS-49 – Fits scoped AR-15’s and similar rifles, 12″ (30cm)wide, 49″ (124cm) long. Colors may vary.

RedHead  Padded Gun Slings - Shotgun or Rifle


RedHead Padded Gun Slings – Shotgun or Rifle


$9.99


Any hunter who’s ventured off the path once knows the importance of a good gun sling. Putting the weight of your gun on your shoulder prevents fatigue that could affect a shot and frees your hands for calls, binoculars, and other tasks. Built from tough nylon material, these slings from RedHead are foam-padded for comfort and lock-stitched for a lifetime of hunts. The edges of the sling are folded, double bar tacked, and heat-sealed to prevent unraveling, giving you a sling you can count on season after season after season. Adjustable for personalized fit. Imported. Features: Durable nylon exterior Foam padded for comfort Lock-stitched Edges treated to prevent unraveling Adjustable strap lets you fit sling to your gun and personal preference

BENCH REST BOYT RIFLE REST


BENCH REST BOYT RIFLE REST


$82.99


Heavy-duty steel base holds your rifle securely for repeatable accuracy. Features three-position elevation adjustment, three-point leveling jacks, padded vinyl forearm bag and nylon buttstock strap. Easy-to-see, bubble level helps prevent canting the gun for added consistency. Threaded leveling jacks allow fine-tuning elevation; includes large wing nuts to lock jacks in place. Disassembles for easy storage. SPECS: Steel frame, green. Rubber coated feet. 24” (61cm) long, 11½” (29cm) wide 7.1 lbs. (3.2kg) wt. Front adjusts from 9” (22.8cm) to 13½” (34.3cm) high.

Camo Big Popper Toy Rifle


Camo Big Popper Toy Rifle


$34.95


30” lever action western rifle Does not shoot projectiles Wood and steel construction A toy gun for the aspiring marksman who wants to be just like the adults! The Camo Big Popper Toy Rifle is an excellent way to help teach gun safety. This gun makes a loud pop when fired, but does not shoot projectiles. This 30”, lever action, western rifle is made of wood and steel and sports a camouflage painted finish. For ages 4 and older. Makes a great gift that any young hunter or cowboy would love!

RUGER~ 10/22~ ULTRALIGHT TARGET BARREL RUGER 10-22 ULTRALIGHT TARGET BARREL


RUGER~ 10/22~ ULTRALIGHT TARGET BARREL RUGER 10-22 ULTRALIGHT TARGET BARREL


$189.99


Premium-quality aluminum alloy barrel gives the rigidity, stability, and performance of a steel bull barrel without the excess weight. Lets you build a tack-driving target rifle from an affordable, easy-to-obtain Ruger 10/22 action. Fully machined to precise, match-grade tolerances from exceptionally hard 7075 aluminum billet that’s actually stronger than many mild steel alloys, yet gives all the benefits of a thick barrel, including improved heat distribution to resist accuracy changes due to barrel heating. Custom match chamber in .22 LR or .17 HM2, and button-rifled Chromalloy steel liner with precise 1-16" rifling for excellent accuracy, even from 60-grain subsonic .22 LR ammo. B SPECS: 7075 T6 aluminum barrel, Cerakote finish, matte black. Chromalloy steel liner. 18" (45.7cm) long, .930" (23.6mm) O.D. 1 lb. 2 oz. (510g) weight. Fits Ruger 10/22 .22 LR receivers only. Models chambered in .22 LR and .17 HM2.

RANCH RIFLE SCOPEMOUNT~ PICATINNY RANCH RIFLE MOUNT, BLACK


RANCH RIFLE SCOPEMOUNT~ PICATINNY RANCH RIFLE MOUNT, BLACK


$49.99


Provides additional flexibility when mounting shorter scopes or electronic sights. Requires no modifications to gun; quickly attaches to Mini-14 Ranch Rifle, Mini-30, PC-9, PC-40, and 10-22 Magnum. Positions the scope low over the receiver for improved balance and better eye alignment. Lightweight aluminum keeps weight to a minimum. Available in Weaver-style or Picatinny; Weaver-style accepts all Weaver-style rings, plus Pro-Point and scopes with built-in Weaver-style ring clamps. Accepts all Weaver-style rings, plus Pro-Point and scopes with built-in Weaver-style ring clamps. SPECS: Aluminum, black or silver, anodized finish; Picatinny only available in black. 5″ (12.7cm) long. 2.6 oz. (74 g) weight.

RANCH RIFLE SCOPEMOUNT~ MINI-14 RANCH RIFLE MOUNT, SILVER


RANCH RIFLE SCOPEMOUNT~ MINI-14 RANCH RIFLE MOUNT, SILVER


$49.95


Provides additional flexibility when mounting shorter scopes or electronic sights. Requires no modifications to gun; quickly attaches to Mini-14 Ranch Rifle, Mini-30, PC-9, PC-40, and 10-22 Magnum. Positions the scope low over the receiver for improved balance and better eye alignment. Lightweight aluminum keeps weight to a minimum. Available in Weaver-style or Picatinny; Weaver-style accepts all Weaver-style rings, plus Pro-Point and scopes with built-in Weaver-style ring clamps. Accepts all Weaver-style rings, plus Pro-Point and scopes with built-in Weaver-style ring clamps. SPECS: Aluminum, black or silver, anodized finish; Picatinny only available in black. 5″ (12.7cm) long. 2.6 oz. (74 g) weight.

RANCH RIFLE SCOPEMOUNT~ RANCHB RUGER MINI 14 RANCH RIFLE MOUNT


RANCH RIFLE SCOPEMOUNT~ RANCHB RUGER MINI 14 RANCH RIFLE MOUNT


$49.95


Provides additional flexibility when mounting shorter scopes or electronic sights. Requires no modifications to gun; quickly attaches to Mini-14 Ranch Rifle, Mini-30, PC-9, PC-40, and 10-22 Magnum. Positions the scope low over the receiver for improved balance and better eye alignment. Lightweight aluminum keeps weight to a minimum. Available in Weaver-style or Picatinny; Weaver-style accepts all Weaver-style rings, plus Pro-Point and scopes with built-in Weaver-style ring clamps. Accepts all Weaver-style rings, plus Pro-Point and scopes with built-in Weaver-style ring clamps. SPECS: Aluminum, black or silver, anodized finish; Picatinny only available in black. 5″ (12.7cm) long. 2.6 oz. (74 g) weight.

RIMLESS RIFLE CHAMBERING REAMERS CLYMER 12 RIFLE EXTENSION


RIMLESS RIFLE CHAMBERING REAMERS CLYMER 12 RIFLE EXTENSION


$35.99


Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: RIFLE REAMERS – 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16″ round shank with 3/8″ square drive. ¼” round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

RIMLESS RIFLE CHAMBERING REAMERS CLYMER RIFLE T-HANDLE


RIMLESS RIFLE CHAMBERING REAMERS CLYMER RIFLE T-HANDLE


$35.99


Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: RIFLE REAMERS – 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16″ round shank with 3/8″ square drive. ¼” round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER RIFLE T-HANDLE


RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER RIFLE T-HANDLE


$35.99


Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: RIFLE REAMERS – 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16″ round shank with 3/8″ square drive. ¼” round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER 12 RIFLE EXTENSION


RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER 12 RIFLE EXTENSION


$35.99


Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010″ smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. SPECS: RIFLE REAMERS – 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16″ round shank with 3/8″ square drive. ¼” round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

CENTERFIRE RIFLE ACTION PROVING DUMMIES CENTERFIRE RIFLE A/P DUMMY KIT


CENTERFIRE RIFLE ACTION PROVING DUMMIES CENTERFIRE RIFLE A/P DUMMY KIT


$145.99


Manufactured to exact specifications, including diameter and length dimensions, weight and balance of factory loaded ammo, these DUMMIES have the proper functioning characteristics to reliably check magazine feeding, action timing, extraction and ejection of all guns. The only professionally accepted and safe way to check gun functioning; live ammo should never be used except in actual test-firing on the range – after you have checked the gun with DUMMIES. The very reasonable cost per DUMMY is an added incentive to use them regularly. The blackened case makes them distinct, and instantly recognizable as DUMMIES, which makes them ideal – and safe – to use as a sales aid. Especially useful whe SPECS: Centerfire Rifle Kit contains 1 each of 42 calibers marked with an asterisk. Items marked with + are 1 of 13 items contained in the Dummy Catch Up Pak (#084-000-263).

YOU ARE NOW IN RANGE -Warning Sign- gun rifle signs new


YOU ARE NOW IN RANGE -Warning Sign- gun rifle signs new


$8.99


This is a brand new 12″ tall and 8″ wide sign. Our novelty signs are made from outdoor durable plastic with professional grade vinyl graphics. These signs will never rust or fade, perfect inside or out (5 years outdoors)! The sign has round corners and pre-drilled holes for easy mounting. This item is in stock and ready to ship, generally the following business day. Please check out all our other …

DON'T TOUCH MY GUNS -Warning Sign- shot shoot crazy fun


DON’T TOUCH MY GUNS -Warning Sign- shot shoot crazy fun


$8.99


This is a brand new 12″ tall and 8″ wide sign. Our novelty signs are made from outdoor durable plastic with professional grade vinyl graphics. These signs will never rust or fade, perfect inside or out (5 years outdoors)! The sign has round corners and pre-drilled holes for easy mounting. This item is in stock and ready to ship, generally the following business day. Please check out all our other …

GUN OWNER ~Wall Clock shop rifle pistol nra bullet amo


GUN OWNER ~Wall Clock shop rifle pistol nra bullet amo


$15.99


This BRAND NEW wall clock measures 10 inches in diameter. It has a black plastic frame with a clear cover. Graphics are rich and vibrant and will last a lifetime. These clocks make a great accent to any room in your home or business. A perfect addition to your kitchen, bathroom, bedroom, family room or anywhere. The clock has precision quartz movement and operates on 1 AA battery (not included). P…

Shooting Gallery - 2009


Shooting Gallery – 2009


$24.95


Shooting Gallery is cutting edge television for real shooters – whether they are collectors, competitors, hunters, or carry for self-defense. Hosted by author and competitive shooter Michael Bane, this Outdoor Channel original series explores the world of firearms technology, technique and history.This product is manufactured on demand using DVD-R recordable media. Amazon.com’s standard return pol…

Rifle Marksmanship Training with the M-1 Garand on DVD Including Bonus Book on CD How To Shoot The U.S. Army Rifle


Rifle Marksmanship Training with the M-1 Garand on DVD Including Bonus Book on CD How To Shoot The U.S. Army Rifle


$12.99


These are Excellent videos for those who would like to know more about rifle shooting. They are great for both the beginner and the expert who needs a refresher. The series focuses on the M1 Garand, but the techniques can be applied to any rifle. This film covers sling usage and shooting positions as well as sight adjustments. Bonus CD includes a digital copy of the book “How To Shoot The U.S. Arm…



Rifle Gun Target
what scope and mounting system is used on the winchester wildcat 22 long rifle the varmit and target rifle ser?

im buying this gun and need to find the right scope

There are many scopes that will work for your Winchester Wildcat Target/Varmint Rifle. This forum thread should help give you some good ideas.

http://www.gunandgame.com/forums/22-rimfire/49811-best-scope-under-100-a.html



Winchester Rifles Part 2 (gun porn)