Bipod Bayonet
|
|
M-2 BIPOD MA5015 M-2 BIPOD $161 M-2 BIPOD |
|
|
AR-15/M16 BAYONET LUG AR-15 GAS BLOCK LUG $14.47 Bolts directly to Modular Gas Block to allow installation of a mil-spec bayonet or lug-mounted bipod on your AR-15. Installs and removes easily with an Allen wrench so you can configure your rifle’s accessory package at any time to fit mission requirements. Precision machined from 4140 steel for optimal strength and rigidity. Includes mounting screws. Modular Gas Block not included.. SPECS: Steel, matte black Parkerized finish. 2-5⁄16″ (5.9cm) long, ½” (1.3cm) wide, 2-1⁄64″ (8.3mm) tall. Allen wrench not included |
|
|
BIPOD ADAPTER YHM638 BIPOD ADAPTER $30.99 Lightweight, slimline design eliminates the “clunky” extra baggage look that goes along with trying to mate a bipod to a AR-15/M16 handguard. The rugged, aluminum platform with fixed attachment stud provides a superior fit to Weaver or Picatinny, accessory rails. Two hex-head crossbolts give uniform clamping pressure, so adapter remains rock solid while shooting. Specifically contoured to accept Harris and similar bipods that attach to a swivel stud. SPECS: Aircraft-grade aluminum, hardcoat anodized, matte black finish. 2-5/8″ (6.7cm) long, 1¼” (3.2cm) wide, 5/8″ (1.6cm) high. 2.2 oz. (62g) wt. |
|
|
BIPOD SPEEDY KNOB TANKS RIFLE SHOP BIPOD SPEED KNOB $6.4 Install or remove your Harris Bipod in just seconds by adding this easy-to-turn thumb knob. Mounts in place of the Harris mounting/attachment screw. Can also be used with the Harris #6A Adapter for faster bipod setting on a forend rail. SPECS: Steel, blue. .750″ (19.2mm) diameter knob. |
|
|
BIPOD ADAPTER FA ENTERPRISES BIPOD ADAPTER $37.99 Swivel stud mounted to an aluminum block slides onto Picatinny and Weaver-style accessory rails. Lets you mount a sling or bipod where you want it; near the rifle midpoint, along either side of tube, or near the muzzle. Clamps down tightly with no external nuts to snag your fingers or catch on clothing. Great on AR-15’s and rifles with accessory rail handguards and float tubes. SPECS: 6061-T6 aluminum, Anodized, matte black. 2¾” (6.9cm) long. |
|
|
PICATINNY RAIL BIPOD ADAPTER PICATINNY BIPOD ADAPTER $29.99 Precision machined aluminum and steel adapter clamps securely to bottom of railed handguard to let you mount a bipod that requires a sling swivel stud attachment point. Steel locking bar and three hardened steel hex head screws that also serve as recoil lugs attach to Picatinny and Weaver-style rails for an ultra-solid platform that won’t slip even under heavy recoil. Streamlined design adds minimal bulk and weight to your weapon. SPECS: Hardcoat anodized aluminum and parkerized steel, matte black. 2-5⁄8″ (6.7cm) long, approx. 1-1⁄8″ (2.9cm) wide, extends 7⁄16″ (1.1cm) below rail. 2.9 oz. (81g) weight. |
|
|
UNIVERSAL FEATHERWEIGHT BIPOD UNIVERSAL FEATHERWEIGHT BIPOD $34.95 Solid, glass-filled nylon bipod mounts to any sling swivel stud to provide superior forend support, yet is so lightweight you’ll hardly know it’s there. Telescoping legs with non-skid rubber feet adjust from 9″ to 13″ high to accommodate shooting prone or from the bench. Snap-n-lock button allows legs to conveniently fold and lock to the front or rearward position. Interchanging swivel collars let you assemble the unit for swivel motion or a locked position. Included neoprene pad protects the mounting surface of your stock. Additional hardware allows direct mounting to round, mil-spec AR-15 handguards without modification.Includes instructions. SPECS: Glass filled nylon, black, matte finish. 8.4 oz. (238g) wt. Adjusts from 9” (22.9cm) to 13” (33cm) high. |
|
|
PICATINNY BIPOD ADAPTER BROWNELLS PICATINNY BIPOD ADAPTER $42.95 Low-profile adapter clamps solidly to any Picatinny rail handguard to provide a secure mounting point for bipods that attach to sling swivel studs. Increases your accessory mounting options without making permanent alterations to gun. Stud and base are precision machined from a single billet of high-grade 6061 T6 aluminum for maximum strength to handle the rigors of tactical deployment. Two robust cross-bolts and oversized, slotted hex nuts of heat-treated 4140 carbon steel lock the full-contact clamping bar tightly to the rail, and ensure the mount won’t shift position even under heavy recoil. Also accepts a standard quick-release sling swivel, for rapid transition from bipod operation to s SPECS: Body – 6061 T6 aluminum, hardcoat anodized, matte black. Thumbscrews & Bolts – 4140 carbon steel, black oxide finish. 2.125” (5.4cm) long, 1” (2.5cm) wide. Mount extends .357” (9.5mm) below rail. 2.7 oz. (76g) weight. |
|
|
BIPOD FOR PICATINNY RAIL BIPOD PICATINNY RAIL MEDIUM LEG SIZE $124.99 The Command Arms Accessories Bipod is a versatile bipod, which easily mounts onto a Picatinny rail in seconds. Legs are quickly attached or detached with only two minor adjustments. Its 3-inch Picatinny Rail allows for the addition of a foregrip without sacrificing valuable space on the handguard. A new recessed design offers a higher leg mounting system, which adds stability and a greater center of gravity. A non-slip grip is provided by rubber leg covers. SPECS: Quick release push button leg extension, Legs manufactured from stainless steel, No external springs, Lightweight design, Increased stability. Lifetime Warranty. |
|
|
SCHMIDT-RUBIN K31 BIPOD ADAPTER K31 SCHMITT RUBIN BIPOD ADAPTER $81.67 Lightweight, two-piece adapter makes it easy to attach conventional, swivel stud-mounted bipods to the popular K31 service rifle without any permanent alterations to the gun. 1" wide, extended length mounting bracket secures to the front triggerguard screw hole to eliminate drilling and tapping. Heavy-duty, steel cradle with thick, leather lining mounts to the bracket with the supplied 8-32 screws to give full, non-marring support for the stock forend. Assembled unit provides a rigid bipod platform that helps you achieve maximum stability and enhanced accuracy. Integral track machined into the bottom side of the bracket allows precise adjustment of the mounting stud, so your bipod ca SPECS: Adapter Bracket – Aluminum, black, anodized finish. Cradle – 1⁄8" (3.2mm) thick steel, blued, with genuine leather lining. Assembled Size – 8¾” (22.2cm) long, 2” (5.8cm) wide, 2¼” (5.7cm) high. 6.9 oz. (195.6g) wt. Includes bracket, cradle, stu |
|
|
AR-15/M16 ADVANCED COMBAT BIPOD TANGO DOWN ADVANCED COMBAT BIPOD, BLK $237.94 Sometimes the simplest design works the best. This compact bipod has legs that fold down and back up with the push of a button, silently and smoothly, allowing you to stay focused and on target. Individual leg height is set with a recessed push-button that totally eliminates any chance of an accidental release. Legs are preset for the optimum traverse angle and left/right cant; will never require adjustment. Non-slip, molded feet grab and hold the surface, so you won’t drift off target during rapid fire. Minimum leg length is 8″ from bottom of rail, adjustable in three positions up to 2½” longer to fit individual shooters. Machined aluminum base with durable, polymer composite legs. Secures SPECS: Aluminum base, steel hardware, polymer composite legs, matte black. 9” (22.9cm) long, 37⁄8″ (9.9cm) wide, 1” (2.5cm) high. |
|
|
Ram-Line Rifle Bipod $14.99 Clips onto all standard barrels. Spring-loaded bipod locks closed for easy carrying. High-impact molded plastic legs spring open to clamp onto your barrel without marring. Lightweight and extremely durable. Height: 12″ closed; 9-1/2″ fully opened. Color: Black. |
|
|
HARRIS-TYPE BIPOD THROW LEVER® MOUNT HARRIS BIPOD THROW LEVER MOUNT $98 The A.R.M.S. #32 Throw Lever Adapter for Harris-type Bipod is designed to allow the fastest attach/detach functions possible. It allows the lever to be attached to either side of a bipod and acts as a light weight, low-profile attachment. No gunsmithing is required, simply remove the adjustment screw assembly and install the A.R.M.S. Throw Lever assembly. It offers a quick action and features a black non-reflective finish and included adjustment wrench. Specs: Included wrench, Throw Lever, Black finish |
|
|
BIPODS HARRIS 1A2-BRM BIPOD $90.99 Mounts to QD swivel studs on bolt action and single-shot rifles for ultimate field accuracy. Won’t change zero; added weight steadies gun. Spring-loaded, telescoping legs adjust quickly, fold parallel to barrel for carrying. Series 1A2 bipods have solid base and do not swivel or rotate. Series S bipods rotate 45° for instant leveling on uneven ground. Buffer springs and adjustable tension on hinged base help eliminate tremor. All Models available in either Series. All Adapters fit either Series bipods. Not recommended for lever actions. SPECS: Aluminum and high carbon steel, anodized, black finish. Adjustment height range is from resting surface to center of bore. Height is noted in chart below. Model BR: For benchrest use. BRM has equally spaced height adjusting notches.Model H: For pron |
|
|
MODPOD SYSTEM MP-1T MODPOD VERSATILE BIPOD $204.95 Quick-deploy tactical bipod system gives the operator an exceptionally stable shooting platform for long-range targeting, while adding minimal bulk and weight to the weapon. Innovative two-piece design clamps directly to Picatinny side rails on forearm—no separate mounting hardware to misplace, lose, or accidentally leave back at base. Each leg is completely self-contained with captive clamp, locking bar, cross-bolt, and thumbscrew. Leaves bottom rail free for mounting other accessories, and ModPod is a perfect bipod option for weapons fitted with a grenade launcher, shotgun, or tear gas launcher. The absence of a complicated pivot mechanism under the handguard means the ModPod also SPECS: Steel pivot mechanism, aluminum rail clamps, and reinforced molded polymer legs, matte black and tan. Leg length: 9” (22.9cm) retracted, 11¼” (28.6cm) fully extended |
|
|
BIPOD ADAPTER HARRIS #6A STUD $9.99 Mounts a swivel stud on forend accessory rails. Fits rails approximately 5⁄16″ wide. SPECS: High carbon steel, anodized, black finish. |
|
|
BIPODS HARRIS S-BRM BIPOD $109.99 Mounts to QD swivel studs on bolt action and single-shot rifles for ultimate field accuracy. Won’t change zero; added weight steadies gun. Spring-loaded, telescoping legs adjust quickly, fold parallel to barrel for carrying. Series 1A2 bipods have solid base and do not swivel or rotate. Series S bipods rotate 45° for instant leveling on uneven ground. Buffer springs and adjustable tension on hinged base help eliminate tremor. All Models available in either Series. All Adapters fit either Series bipods. Not recommended for lever actions. SPECS: Aluminum and high carbon steel, anodized, black finish. Adjustment height range is from resting surface to center of bore. Height is noted in chart below. Model BR: For benchrest use. BRM has equally spaced height adjusting notches.Model H: For pron |
|
|
AR-15/M16 BAYONET LUG ACCESSORY MOUNT AR15 BAYONET LUG ACCESSORY MOUNT $55.95 Provides a quick, convenient platform for tactical lights and other shooting accessories that mount on a Picatinny rail. Installs on any AR15/M16 variant equipped with a standard issue sight tower with bayonet lug. Installation is easy: simply drill out the forward sling swivel rivet, slide the Accessory Mount over the bayonet lug, and secure the mount through the swivel rivet hole with provided Allen screw. Specifically designed for the Surefire X200 and Insight Technology M3X series tactical lights. Precision CNC Machined from T6061 aluminum billet, then hard anodized with a MIL-A-8625F, Type III black finish for superior wear-resistance. Integral, sling attachment loops allow forward slin SPECS: Aluminum, matte black, Mil-Spec anodized finish. 2¼” (5.7cm) long, .831” (2.1cm) wide. 2 oz. (56g) wt. |
|
|
VERSA POD 150-001 MODEL 1 VERSA-POD BIPOD $75.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-002 MODEL 2 VERSA-POD BIPOD $75.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-003 MODEL 3 VERSA-POD BIPOD $80.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-011 MODEL 1T VERSA POD BIPOD $80.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-013 MODEL 2T VERSA POD BIPOD $80.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-050 MODEL 50 SUPER SHORT BIPOD $94.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-052 MODEL 52 STD PRONE BIPOD $97.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-051 MODEL 51 SHORT PRONE BIPOD $94.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
PICATINNY RAIL VERSA POD 150-925 LW PICATINNY RAIL BIPOD, 7-9, $199.95 Two, distinctly different bipods attach quickly to any Mil. Std. 1913 Picatinny rail for faster deployment when changing from field to bench shooting. Lightweight Picatinny (LW) features a convenient flip lever that locks securely to the rail, but can be flipped back for complete bipod removal in just seconds. Pan and tilt adjustments are controlled by tightening the dual locknuts with a wrench. Heavy Duty Picatinny (HD) attaches to Picatinny rails with a dual-screw, locking dovetail mount. Pan and tilt feature includes an instantly-adjustable, friction-locking thumbscrew that adjusts to expand or limit movement. Both models feature spring-loaded legs with non-skid rubber feet SPECS: Steel, matte black. Lightweight – 17 oz. (.48kg) wt. Heavy Duty – 1½ lb. (.68kg) wt. |
|
|
PICATINNY RAIL VERSA POD 180-MZ-251 LW MIL-1913 RAIL BIPOD MIL $249.95 Two, distinctly different bipods attach quickly to any Mil. Std. 1913 Picatinny rail for faster deployment when changing from field to bench shooting. Lightweight Picatinny (LW) features a convenient flip lever that locks securely to the rail, but can be flipped back for complete bipod removal in just seconds. Pan and tilt adjustments are controlled by tightening the dual locknuts with a wrench. Heavy Duty Picatinny (HD) attaches to Picatinny rails with a dual-screw, locking dovetail mount. Pan and tilt feature includes an instantly-adjustable, friction-locking thumbscrew that adjusts to expand or limit movement. Both models feature spring-loaded legs with non-skid rubber feet SPECS: Steel, matte black. Lightweight – 17 oz. (.48kg) wt. Heavy Duty – 1½ lb. (.68kg) wt. |
|
|
VERSA POD BATTLE PACK VERSA POD BATTLE PACK BIPOD KIT $139.95 Combines the highly adaptable Model 52 Versa-Pod with three interchangeable sets of legs that let you configure the bipod for a wide variety of terrain and shooting applications. Kit includes legs with non-skid rubber feet for bench, range, or vehicle hood; “ski” feet for wet, porous terrain like mud, clay, or wet grass; and raptor feet for the roughest, slipperiest conditions. Quick-deploy legs can be adjusted anywhere from 9” (fully retracted) to 12” (fully extended) high. Pan-and-tilt mechanism lets you pivot the rifle left, right, up, or down to compensate for uneven ground. An adjustable, friction-locking thumbscrew limits the range of pivot movement or even l SPECS: Steel and aluminum, matte black finish. Leg height adjustment: 9” (22.9cm) to 12” (30.5cm). 20.4 oz (578g) weight. Separately available adapter required to mount on rifle |
|
|
INTRAFUSE STOCK & COMPLIANCE KIT SKS T6 ADJUSTABLE STOCK W/BAYONET CUT $84.99 Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. SPECS: Molded polymer, black, flat dark earth or O.D. green. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm). |
|
|
INTRAFUSE STOCK & COMPLIANCE KIT SKS T6 ADJ. STOCK W/O BAYONET CUT $89.99 Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. SPECS: Molded polymer, black, flat dark earth or O.D. green. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm). |
|
|
INTRAFUSE STOCK & COMPLIANCE KIT SKS T6 ADJUST STK W/BAYONET CUT-OD GRN $84.99 Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. SPECS: Molded polymer, black, flat dark earth or O.D. green. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm). |
|
|
INTRAFUSE STOCK & COMPLIANCE KIT SKS T6 ADJUST STK W/BAYONET CUT-FDE $84.99 Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. SPECS: Molded polymer, black, flat dark earth or O.D. green. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm). |
|
|
INTRAFUSE STOCK & COMPLIANCE KIT SKS T6 ADJ STK W/O BAYONET CUT-OD GRN $77.99 Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. SPECS: Molded polymer, black, flat dark earth or O.D. green. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm). |
|
|
INTRAFUSE STOCK & COMPLIANCE KIT SKS T6 ADJ. STK W/O BAYONET CUT-FDE $77.99 Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. SPECS: Molded polymer, black, flat dark earth or O.D. green. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm). |
|
|
INTRAFUSE COMPLIANCE KIT SKS BLACK COMPL KIT W/BAYONET GROOVE $136.99 Convenient kit contains nine U.S.-made components that comply with U.S. Code Title 18 Section 922(r) part-source requirements and make your SKS more comfortable to shoot, easier to handle, and more reliable. Includes the Fusion T6 stock, SAW-style pistol grip, and the upper handguard with accessory rail. The smooth-running 20-round detachable magazine easily replaces the internal magazine and floorplate and counts as three parts. The functioning muzzle brake replicates the look of the grenade launcher on a Yugo SKS 59/66 and has 25 multi-directional ports to help reduce muzzle rise and felt recoil. A long-wearing machined stainless steel gas piston and tough 4140 steel operating rod help SPECS: Fits SKS only. Stock, Buttstock, Handguard, Pistol Grip & Magazine – Composite synthetic, black, matte finish. Gas Piston – Stainless steel. Op Rod & Muzzle Brake – Steel, oxide finish, black. Muzzle brake fits barrels with 14mm-1.0 RH threads only. 32” (81.2cm |
|
|
INTRAFUSE COMPLIANCE KIT SKS COMPL KIT W/O BAYONET GROOVE $134.99 Convenient kit contains nine U.S.-made components that comply with U.S. Code Title 18 Section 922(r) part-source requirements and make your SKS more comfortable to shoot, easier to handle, and more reliable. Includes the Fusion T6 stock, SAW-style pistol grip, and the upper handguard with accessory rail. The smooth-running 20-round detachable magazine easily replaces the internal magazine and floorplate and counts as three parts. The functioning muzzle brake replicates the look of the grenade launcher on a Yugo SKS 59/66 and has 25 multi-directional ports to help reduce muzzle rise and felt recoil. A long-wearing machined stainless steel gas piston and tough 4140 steel operating rod help SPECS: Fits SKS only. Stock, Buttstock, Handguard, Pistol Grip & Magazine – Composite synthetic, black, matte finish. Gas Piston – Stainless steel. Op Rod & Muzzle Brake – Steel, oxide finish, black. Muzzle brake fits barrels with 14mm-1.0 RH threads only. 32” (81.2cm |
|
|
#41-B FOLDING FRONT SIGHT OPTIONAL BAYONET LUG FOR #41-B $15 The A.R.M.S. #41 B Silhouette Front Folding Sight features an integral gas block and fits standard size 750 barrels. This sight addresses the problems of standard triangle shape non-folding front sights, utilizing a rugged spring loaded angled support system. This angled system helps eliminate snags in brush and other hazards. It also uses the standard front sight post. Comes complete with a non-reflective black finish and included adjustment wrench. Specs: Fits size 750 barrels, Folding design, Angled support, Black finish, Included adjustment wrench |
|
|
GPS-02 GPS-02 $154.95 Dual-function vertical grip locks to the bottom accessory rail on your tactical rifle’s forend to give enhanced control during CQB operations, plus provides a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button on the front of the base and a powerful spring deploys the bipod legs instantly. Conveniently placed for activation with the index finger, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on br SPECS: Reinforced polymer, black; steel reinforcements in legs. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) long with legs extended. 13⁄64″ (3.5cm) diameter. 7.8 oz. (220g). |
|
|
KMW POD-LOC KMW #875 POD-LOC $26.99 Spring loaded lever replaces the Harris lock nut, provides plenty of leverage to lock or unlock the swivel using only your fingers. Provides a dust and dirt shield that protects the clutch mechanism from damage. Spring loaded lever may be parked against the stock to minimize snagging. Installation requires no modification to bipod. Used by the U.S. Military, NSN 100-09-000-2008. SPECS: Synthetic handle, stainless steel mechanism, black, matte finish. Handle 1-1/2″ (3.8cm) long. Fits Harris S-series bipods. |
|
|
AR-15/M16 GPS-LE GRIP POD GPS-LE GRIP POD $99.99 Vertical grip with quick-deploy bipod legs is an economical alternative for applications where the original GPS-02 Grip Pod’s function and benefits are desired, but the steel reinforcements in its legs are excess to requirements. The GPS-LE (Law Enforcement) locks to the bottom accessory rail of your tactical rifle’s forend, just like the GPS-02, to provide the same enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thum SPECS: Reinforced polymer, black. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. 7 oz. (197g). |
|
|
VERSA POD 150-100 UNIVERSAL ADAPTER $24.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-101 PRE-BAN AR-15 ADAPTER $24.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-116 POST-BAN AR-15 ADAPTER $33.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
VERSA POD 150-603 AR15 PICATINNNY RAIL ADAPTER $40.95 Modular, two-piece design provides easy, push-button bipod removal. In the field you can carry the legs on your rifle or in a backpack. Multi-pivot head pans right and left; cants to compensate for uneven ground. Height adjustable legs may be folded to the front or rear. Mounting adapter included, additional adapters let you quickly interchange bipods between rifles. Model 50, 51, 52 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 1 – bench/prone, has grooved metal feet. Mounts to QD swivel stud. Model 2 – bench/prone, has rubber feet. Mounts to QD swivel stud. Model 3 – sitting, has rubber feet. Mounts to QD swivel stud. Model 1T – mount SPECS: Bipod – Steel and aluminum, black, matte finish. Adapter – Polycarbonate, black. |
|
|
AR-15 NM FREE FLOAT BARREL SLEEVE AR-15 NM FREE FLOAT BARREL SLEEVE $100 Two-piece steel tube isolates barrel from forend pressure for consistent accuracy on target and tactical rifles. Lets you use a tight shooting sling or a bipod without putting external pressure on barrel and shifting point of impact. Furnished with A2 handguards, sling swivel and gas tube. DCM legal, does not alter exterior profile. SPECS: Steel, parkerized finish. High-temp injection-molded handguards, black. 13″ (33cm) long. 16 oz. (454 g) weight. Fits AR-15 with 20″ barrel. |
|
|
AR-15 VERTICAL FOREND GRIP AR-15 VERTICAL FOREND GRIP $35.7 Molded, polymer, vertical grip attaches to Picatinny and Weaver-style accessory rails on your AR-15 handguard for superior control and improved weapon retention. Grooved, grip area ensures positive, non-slip hold in all tactical situations. Reduces fatigue and improves muzzle control in close quarters. Threaded shaft, with tightening knob, locks grip to rail, plus, makes removal fast and easy when shooting from a bench or bipod. Rubber O-ring prevents accidental loosening. Check out the video demonstration of the various vert SPECS: Polymer, black. 4¾” (12.1cm) long. |
|
|
RUGER~ 10/22~ SUPER STOCK 10/22 SUPERSTOCK $149.95 Rigid polymer replacement stock improves shooter comfort and control for more accurate shot placement, plus gives your 10/22 an aggressive tactical look. Three, detachable, Picatinny-type rails on the forearm allow you to mount a variety of accessories, including lights, lasers, a bipod, and the included detachable vertical grip. Seven-position, collapsible buttstock gives a full 3″ length-of-pull adjustment from 12-7⁄8″ to 15-7⁄8″. Detachable thermoplastic rubber buttpad and cheek rest, along with hand-filling pistol grip, provide exceptionally solid contact when mounting rifle to shoulder. Other features include adjustable sling swivels, a cutout in the stock for serial numbe SPECS: Injection-molded polymer & thermoplastic rubber, black, matte. 3¾ lbs. Fits 10/22 rifles with standard tapered barrels. |
|
|
HANDI-RIFLE STOCK & FOREND NEF HANDI RIFLE VARMINT FOREND $40 High-impact plastic stock and forend fits all NEF and H&R rifles, plus 12 and 20 gauge shotguns. Adjustable length of pull spacers allows for individual adjustments and a precise fit. One inch, rubber recoil pad softens felt recoil in large caliber rifles and shotguns. Stock is designed for use with scope sights (drop not sufficient for open sights) and is skeletonized for light weight. A thumbwheel in the bottom of the stock works as an adjustable quicky-rest for bench shooting. Forend is wide and flat for bench and bag shooting and the integral rail system gives quick removal and installation of bipod. SPECS: High-impact plastic, matte black. Fits all NEF & H&R Handi-Rifles. |
|
|
HANDI-RIFLE STOCK & FOREND NEF HANDI RIFLE VARMINT STOCK $53 High-impact plastic stock and forend fits all NEF and H&R rifles, plus 12 and 20 gauge shotguns. Adjustable length of pull spacers allows for individual adjustments and a precise fit. One inch, rubber recoil pad softens felt recoil in large caliber rifles and shotguns. Stock is designed for use with scope sights (drop not sufficient for open sights) and is skeletonized for light weight. A thumbwheel in the bottom of the stock works as an adjustable quicky-rest for bench shooting. Forend is wide and flat for bench and bag shooting and the integral rail system gives quick removal and installation of bipod. SPECS: High-impact plastic, matte black. Fits all NEF & H&R Handi-Rifles. |
|
|
Type 100 submachine gun: MP 18 , Bayonet, Barrel (firearms), Chrome Plating, Bipod, Muzzle Brake, Stock, Withdrawal (military) $48.00 High Quality Content by WIKIPEDIA articles! The Type 100 (???????? Hyaku-shiki kikan-tanju) was a Japanese submachine gun used during World War II, and the only submachine gun produced by Japan in any quantity.Designed and built by the Nambu Arms Manufacturing Company, the Type 100 was a submachine gun that was first delivered to the Imperial Army in 1942. Japan was surprisingly late to introduce … |
|
|
SKS Bipod Bayonet Lug Mount $14.19 ABSKS Features: -Color: Black. -Attaches to existing bayonet lug. -Height legs collapsed: 9.4”. -Height legs extended: 14.5”…. |
|
|
AIM SKS Bayonet Mount Bipod $16.37 Compatible With Most SKS Rifles. Spring Loaded Collapses Fully with Independent Height Adjustments On Each Leg…. |
|
|
AR15 Bipod with Bayonet Lug Quick Release Mount in Black $24.84 ABAB Features: -Color: Black. -Attaches to most AR-15/M16 bayonet lugs. -Height legs collapsed: 8.4”. -Height legs extended: 11.2”…. |
Crawl Of Duty 2!!
Tags: ar-15 bipod bayonet lug, bipod bayonet lug, guns.sks, sks bipod bayonet mount
Leave a Comment